Thomas Buck 4199f2e968 Newest buildroot, small flash.sh fixes, disabled ccache, removed gst-opengl. | 8 lat temu | |
---|---|---|
board | 8 lat temu | |
buildroot @ 318a4d8489 | 8 lat temu | |
configs | 8 lat temu | |
.gitignore | 8 lat temu | |
.gitmodules | 9 lat temu | |
Config.in | 9 lat temu | |
README.md | 8 lat temu | |
build.sh | 8 lat temu | |
external.mk | 9 lat temu | |
flash.sh | 8 lat temu |
This is a buildroot project creating a bootable SD card Image for the Olimex iMX233-OLinuXino-Micro (and all other boards of this series).
U-Boot is used instead of the MXS-Bootlets to support SDHC cards. The current mainline Linux Kernel (4.4.1) has been used.
For more informations, read my blog post about this project.
To build, first load the configuration, edit it if neccessary, and run the build:
./build.sh olinuxino_defconfig
./build.sh menuconfig
./build.sh
If this succeeds, insert your SD card, find out it’s identifier, and run this (replace sdc with your disk!):
./flash.sh /dev/sdc
Then eject the card, insert it into the OLinuXino, apply power and watch the boot console on the Debug Serial port.
To clone this repository, enter the following:
git clone https://xythobuz.de/git/CaseLights.git
git submodule init
git submodule update
When pulling changes from this repository, you may need to update the submodule:
git submodule update
This is mostly based on the olinuxino_defconfig included with buildroot. To get U-Boot to compile for the OLinuXino, I included this patch from here.