cleanup pcb

.gitignore

@@ -2,3 +2,6 @@ build
 .directory
 .DS_Store
 pcb/drumkit-backups
+pcb/plot
+pcb/fabrication
+pcb/fab.zip

pcb/drumkit.kicad_pcb

@@ -5,6 +5,12 @@
   )
 
   (paper "A4")
+  (title_block
+    (title "Drumkit")
+    (date "2024-03-25")
+    (rev "1")
+  )
+
   (layers
     (0 "F.Cu" signal)
     (31 "B.Cu" signal)
@@ -1857,12 +1863,12 @@
     (stroke (width 0.2) (type default)) (fill none) (layer "B.Cu") (tstamp 5ba1d609-5eb5-4b81-9241-5d87d4738412))
   (gr_circle (center 201.93 20.32) (end 203.2 20.32)
     (stroke (width 0.2) (type default)) (fill none) (layer "B.Cu") (tstamp 6c32a74d-8481-4a80-a8d3-f5ade0af6e43))
-  (gr_rect (start 85.09 18.415) (end 203.835 109.22)
-    (stroke (width 0.2) (type default)) (fill none) (layer "B.Cu") (tstamp 79fec591-dd4d-4392-b885-91c11a70f04c))
   (gr_circle (center 201.93 107.315) (end 203.2 106.68)
     (stroke (width 0.2) (type default)) (fill none) (layer "B.Cu") (tstamp 9e16f910-e70f-4590-b3c9-71ed3f00d578))
   (gr_circle (center 86.995 20.32) (end 88.265 20.32)
     (stroke (width 0.2) (type default)) (fill none) (layer "B.Cu") (tstamp dcb896e3-c91a-467f-82c0-e31761a2f45c))
+  (gr_rect (start 85.09 18.415) (end 203.835 109.22)
+    (stroke (width 0.2) (type default)) (fill none) (layer "Edge.Cuts") (tstamp 79fec591-dd4d-4392-b885-91c11a70f04c))
 
   (segment (start 139.065 90.805) (end 142.875 94.615) (width 1) (layer "B.Cu") (net 1) (tstamp d3fec01e-51b7-48bd-a358-0153682a36a7))
   (segment (start 133.35 90.805) (end 139.065 90.805) (width 1) (layer "B.Cu") (net 1) (tstamp dcd90705-bd9c-42f6-87f5-6ba8618a2960))

pcb/drumkit.kicad_sch

@@ -4,6 +4,12 @@
 
   (paper "A4")
 
+  (title_block
+    (title "Drumkit")
+    (date "2024-03-25")
+    (rev "1")
+  )
+
   (lib_symbols
     (symbol "Connector:Conn_01x04_Female" (pin_names (offset 1.016) hide) (in_bom yes) (on_board yes)
       (property "Reference" "J" (at 0 5.08 0)
@@ -1114,10 +1120,6 @@
     (stroke (width 0) (type default))
     (uuid 0fb4ec2d-8cc6-4c40-91f3-ca7d4ee1ecd2)
   )
-  (wire (pts (xy 54.61 38.1) (xy 54.61 78.74))
-    (stroke (width 0) (type default))
-    (uuid 0fd88b82-73bc-47a1-b27d-ceed806130f2)
-  )
   (wire (pts (xy 30.48 127) (xy 27.94 127))
     (stroke (width 0) (type default))
     (uuid 119848d1-52f8-4e7c-9e64-5a7eff48e65f)
@@ -1174,10 +1176,6 @@
     (stroke (width 0) (type default))
     (uuid 2a2b7943-ba73-4eec-9045-d64e67436a5a)
   )
-  (wire (pts (xy 57.15 76.2) (xy 57.15 40.64))
-    (stroke (width 0) (type default))
-    (uuid 34b57771-738c-4259-acb3-ebe1b780162e)
-  )
   (wire (pts (xy 81.28 68.58) (xy 90.17 68.58))
     (stroke (width 0) (type default))
     (uuid 35f7d663-5910-4ebf-a0e1-08f7034d6023)
@@ -1510,10 +1508,6 @@
     (stroke (width 0) (type default))
     (uuid dee665e0-2d2e-42a9-a2b0-d88eac014d81)
   )
-  (wire (pts (xy 59.69 73.66) (xy 59.69 43.18))
-    (stroke (width 0) (type default))
-    (uuid df8f4860-da5d-45b7-8952-2acfad6abb5e)
-  )
   (wire (pts (xy 157.48 127) (xy 162.56 127))
     (stroke (width 0) (type default))
     (uuid dfcd4520-133c-4413-85b2-6d3fca79b77f)

pcb/generate_fab.sh

@@ -0,0 +1,55 @@
+#!/bin/bash
+
+# SPDX-FileCopyrightText: 2023 - 2024 Thomas Buck <thomas@xythobuz.de>
+# SPDX-License-Identifier: CERN-OHL-S-2.0+
+#
+#  ------------------------------------------------------------------------------
+# | Copyright (c) 2023 - 2024 Thomas Buck <thomas@xythobuz.de>                   |
+# |                                                                              |
+# | This source describes Open Hardware and is licensed under the CERN-OHL-S v2  |
+# | or any later version.                                                        |
+# |                                                                              |
+# | You may redistribute and modify this source and make products using it under |
+# | the terms of the CERN-OHL-S v2 (https://ohwr.org/cern_ohl_s_v2.txt)          |
+# | or any later version.                                                        |
+# |                                                                              |
+# | This source is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY,          |
+# | INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A         |
+# | PARTICULAR PURPOSE. Please see the CERN-OHL-S v2 (or any later version)      |
+# | for applicable conditions.                                                   |
+# |                                                                              |
+# | Source location: https://git.xythobuz.de/thomas/drumkit                      |
+# |                                                                              |
+# | As per CERN-OHL-S v2 section 4, should You produce hardware based on this    |
+# | source, You must where practicable maintain the Source Location visible      |
+# | on the external case of the Gizmo or other products you make using this      |
+# | source.                                                                      |
+#  ------------------------------------------------------------------------------
+
+cd "$(dirname "$0")"
+
+INFILE="drumkit.kicad_pcb"
+INFILE_SCH="drumkit.kicad_sch"
+OUTDIR="fabrication"
+OUTZIP="fab"
+
+echo "Creating output directory"
+rm -rf $OUTDIR
+mkdir -p $OUTDIR
+
+echo "Exporting drill files"
+#kicad-cli pcb export drill -o $OUTDIR/ --format excellon --generate-map --map-format pdf $INFILE
+kicad-cli pcb export drill -o $OUTDIR/ --format gerber --generate-map --map-format gerberx2 $INFILE
+
+echo "Exporting gerber files"
+#kicad-cli pcb export gerbers -o $OUTDIR/ $INFILE
+kicad-cli pcb export gerbers -o $OUTDIR/ -l F.Cu,B.Cu,F.Mask,B.Mask,F.Paste,B.Paste,F.Silkscreen,B.Silkscreen,Edge.Cuts $INFILE
+
+echo "Exporting BOM files"
+kicad-cli sch export python-bom -o $OUTDIR/bom.xml $INFILE_SCH
+
+# TODO convert BOM XML to proper format for JLCPCB
+
+echo "Compressing archive"
+rm -rf $OUTZIP.zip
+zip -r $OUTZIP fabrication

pcb/generate_plot.sh

@@ -0,0 +1,79 @@
+#!/bin/bash
+
+# SPDX-FileCopyrightText: 2023 - 2024 Thomas Buck <thomas@xythobuz.de>
+# SPDX-License-Identifier: CERN-OHL-S-2.0+
+#
+#  ------------------------------------------------------------------------------
+# | Copyright (c) 2023 - 2024 Thomas Buck <thomas@xythobuz.de>                   |
+# |                                                                              |
+# | This source describes Open Hardware and is licensed under the CERN-OHL-S v2  |
+# | or any later version.                                                        |
+# |                                                                              |
+# | You may redistribute and modify this source and make products using it under |
+# | the terms of the CERN-OHL-S v2 (https://ohwr.org/cern_ohl_s_v2.txt)          |
+# | or any later version.                                                        |
+# |                                                                              |
+# | This source is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY,          |
+# | INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A         |
+# | PARTICULAR PURPOSE. Please see the CERN-OHL-S v2 (or any later version)      |
+# | for applicable conditions.                                                   |
+# |                                                                              |
+# | Source location: https://git.xythobuz.de/thomas/drumkit                      |
+# |                                                                              |
+# | As per CERN-OHL-S v2 section 4, should You produce hardware based on this    |
+# | source, You must where practicable maintain the Source Location visible      |
+# | on the external case of the Gizmo or other products you make using this      |
+# | source.                                                                      |
+#  ------------------------------------------------------------------------------
+
+INSCH="drumkit.kicad_sch"
+INPCB="drumkit.kicad_pcb"
+OUTDIR="plot"
+LAYER_F="F.Cu,F.Mask,F.Paste,F.Silkscreen,Edge.Cuts,User.Drawings"
+LAYER_B="B.Cu,B.Mask,B.Paste,B.Silkscreen,Edge.Cuts,User.Drawings"
+
+cd "$(dirname "$0")"
+rm -rf $OUTDIR
+mkdir -p $OUTDIR
+
+#  --------------
+# | 2D Schematic |
+#  --------------
+
+for IN in $INSCH
+do
+    echo "Exporting schematic $IN"
+
+    for TYPE in pdf svg
+    do
+        echo "Exporting schematic $TYPE"
+        rm -rf $OUTDIR/$IN.$TYPE
+        kicad-cli sch export $TYPE \
+            -t "KiCad Default" \
+            -o $OUTDIR/$IN.$TYPE \
+            $IN
+        echo
+    done
+done
+
+for IN in $INPCB
+do
+    echo "Exporting board $IN"
+
+    #  -----------
+    # | 2D Layout |
+    #  -----------
+
+    for TYPE in pdf svg
+    do
+        rm -rf $OUTDIR/$IN.$TYPE
+
+        echo "Exporting board $TYPE"
+        kicad-cli pcb export $TYPE \
+            -t "KiCad Classic"  \
+            -l $LAYER_F,$LAYER_B \
+            -o $OUTDIR/$IN.$TYPE \
+            $IN
+        echo
+    done
+done