🚸 M666: Fix value filter, add report (#22337)

In reference to #22325

Marlin/src/gcode/calibrate/M666.cpp

@@ -27,30 +27,72 @@
 #include "../gcode.h"
 
 #if ENABLED(DELTA)
-
   #include "../../module/delta.h"
   #include "../../module/motion.h"
+#else
+  #include "../../module/endstops.h"
+#endif
 
-  #define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)
-  #include "../../core/debug_out.h"
+#define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)
+#include "../../core/debug_out.h"
+
+void M666_report(const bool forReplay=true) {
+  if (!forReplay) { SERIAL_ECHOLNPGM("; Endstop adjustment:"); SERIAL_ECHO_START(); }
+  #if ENABLED(DELTA)
+    SERIAL_ECHOLNPAIR_P(
+        PSTR("  M666 X"), LINEAR_UNIT(delta_endstop_adj.a)
+      , SP_Y_STR, LINEAR_UNIT(delta_endstop_adj.b)
+      , SP_Z_STR, LINEAR_UNIT(delta_endstop_adj.c)
+    );
+  #else
+    SERIAL_ECHOPGM("  M666");
+    #if ENABLED(X_DUAL_ENDSTOPS)
+      SERIAL_ECHOLNPAIR_P(SP_X_STR, LINEAR_UNIT(endstops.x2_endstop_adj));
+    #endif
+    #if ENABLED(Y_DUAL_ENDSTOPS)
+      SERIAL_ECHOLNPAIR_P(SP_Y_STR, LINEAR_UNIT(endstops.y2_endstop_adj));
+    #endif
+    #if ENABLED(Z_MULTI_ENDSTOPS)
+      #if NUM_Z_STEPPER_DRIVERS >= 3
+        SERIAL_ECHOPAIR(" S2 Z", LINEAR_UNIT(endstops.z3_endstop_adj));
+        if (!forReplay) SERIAL_ECHO_START();
+        SERIAL_ECHOPAIR("  M666 S3 Z", LINEAR_UNIT(endstops.z3_endstop_adj));
+        #if NUM_Z_STEPPER_DRIVERS >= 4
+          if (!forReplay) SERIAL_ECHO_START();
+          SERIAL_ECHOPAIR("  M666 S4 Z", LINEAR_UNIT(endstops.z4_endstop_adj));
+        #endif
+      #else
+        SERIAL_ECHOLNPAIR_P(SP_Z_STR, LINEAR_UNIT(endstops.z2_endstop_adj));
+      #endif
+    #endif
+  #endif
+}
+
+#if ENABLED(DELTA)
 
   /**
    * M666: Set delta endstop adjustment
    */
   void GcodeSuite::M666() {
     DEBUG_SECTION(log_M666, "M666", DEBUGGING(LEVELING));
+    bool is_err = false, is_set = false;
     LOOP_LINEAR_AXES(i) {
       if (parser.seen(AXIS_CHAR(i))) {
+        is_set = true;
         const float v = parser.value_linear_units();
-        if (v * Z_HOME_DIR <= 0) delta_endstop_adj[i] = v;
-        if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("delta_endstop_adj[", AS_CHAR(AXIS_CHAR(i)), "] = ", delta_endstop_adj[i]);
+        if (v > 0)
+          is_err = true;
+        else {
+          delta_endstop_adj[i] = v;
+          if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("delta_endstop_adj[", AS_CHAR(AXIS_CHAR(i)), "] = ", v);
+        }
       }
     }
+    if (is_err) SERIAL_ECHOLNPAIR("?M666 offsets must be <= 0");
+    if (!is_set) M666_report();
   }
 
-#elif HAS_EXTRA_ENDSTOPS
-
-  #include "../../module/endstops.h"
+#else
 
   /**
    * M666: Set Dual Endstops offsets for X, Y, and/or Z.
@@ -81,21 +123,7 @@
         #endif
       }
     #endif
-    if (!parser.seen("XYZ")) {
-      auto echo_adj = [](PGM_P const label, const_float_t value) { SERIAL_ECHOPAIR_P(label, value); };
-      SERIAL_ECHOPGM("Dual Endstop Adjustment (mm): ");
-      #if ENABLED(X_DUAL_ENDSTOPS)
-        echo_adj(PSTR(" X2:"), endstops.x2_endstop_adj);
-      #endif
-      #if ENABLED(Y_DUAL_ENDSTOPS)
-        echo_adj(PSTR(" Y2:"), endstops.y2_endstop_adj);
-      #endif
-      #if ENABLED(Z_MULTI_ENDSTOPS)
-        #define _ECHO_ZADJ(N) echo_adj(PSTR(" Z" STRINGIFY(N) ":"), endstops.z##N##_endstop_adj);
-        REPEAT_S(2, INCREMENT(NUM_Z_STEPPER_DRIVERS), _ECHO_ZADJ)
-      #endif
-      SERIAL_EOL();
-    }
+    if (!parser.seen("XYZ")) M666_report();
   }
 
 #endif // HAS_EXTRA_ENDSTOPS

Marlin/src/gcode/feature/controllerfan/M710.cpp

@@ -27,7 +27,7 @@
 #include "../../gcode.h"
 #include "../../../feature/controllerfan.h"
 
-void M710_report(const bool forReplay) {
+void M710_report(const bool forReplay=true) {
   if (!forReplay) { SERIAL_ECHOLNPGM("; Controller Fan"); SERIAL_ECHO_START(); }
   SERIAL_ECHOLNPAIR("  M710"
     " S", int(controllerFan.settings.active_speed),
@@ -75,7 +75,7 @@ void GcodeSuite::M710() {
   if (seenD) controllerFan.settings.duration = parser.value_ushort();
 
   if (!(seenR || seenS || seenI || seenA || seenD))
-    M710_report(false);
+    M710_report();
 }
 
 #endif // CONTROLLER_FAN_EDITABLE

Marlin/src/module/settings.cpp

@@ -130,7 +130,7 @@
 
 #include "../feature/controllerfan.h"
 #if ENABLED(CONTROLLER_FAN_EDITABLE)
-  void M710_report(const bool forReplay);
+  void M710_report(const bool forReplay=true);
 #endif
 
 #if ENABLED(CASE_LIGHT_ENABLE)
@@ -168,6 +168,10 @@
   void M554_report();
 #endif
 
+#if EITHER(DELTA, HAS_EXTRA_ENDSTOPS)
+  void M666_report(const bool forReplay=true);
+#endif
+
 #define _EN_ITEM(N) , E##N
 
 typedef struct { uint16_t LINEAR_AXIS_LIST(X, Y, Z, I, J, K), X2, Y2, Z2, Z3, Z4 REPEAT(E_STEPPERS, _EN_ITEM); } tmc_stepper_current_t;
@@ -3302,14 +3306,6 @@ void MarlinSettings::reset() {
 
     #elif ENABLED(DELTA)
 
-      CONFIG_ECHO_HEADING("Endstop adjustment:");
-      CONFIG_ECHO_START();
-      SERIAL_ECHOLNPAIR_P(
-          PSTR("  M666 X"), LINEAR_UNIT(delta_endstop_adj.a)
-        , SP_Y_STR, LINEAR_UNIT(delta_endstop_adj.b)
-        , SP_Z_STR, LINEAR_UNIT(delta_endstop_adj.c)
-      );
-
       CONFIG_ECHO_HEADING("Delta settings: L<diagonal rod> R<radius> H<height> S<segments per sec> XYZ<tower angle trim> ABC<rod trim>");
       CONFIG_ECHO_START();
       SERIAL_ECHOLNPAIR_P(
@@ -3325,32 +3321,11 @@ void MarlinSettings::reset() {
         , PSTR(" C"), LINEAR_UNIT(delta_diagonal_rod_trim.c)
       );
 
-    #elif HAS_EXTRA_ENDSTOPS
-
-      CONFIG_ECHO_HEADING("Endstop adjustment:");
-      CONFIG_ECHO_START();
-      SERIAL_ECHOPGM("  M666");
-      #if ENABLED(X_DUAL_ENDSTOPS)
-        SERIAL_ECHOLNPAIR_P(SP_X_STR, LINEAR_UNIT(endstops.x2_endstop_adj));
-      #endif
-      #if ENABLED(Y_DUAL_ENDSTOPS)
-        SERIAL_ECHOLNPAIR_P(SP_Y_STR, LINEAR_UNIT(endstops.y2_endstop_adj));
-      #endif
-      #if ENABLED(Z_MULTI_ENDSTOPS)
-        #if NUM_Z_STEPPER_DRIVERS >= 3
-          SERIAL_ECHOPAIR(" S2 Z", LINEAR_UNIT(endstops.z3_endstop_adj));
-          CONFIG_ECHO_START();
-          SERIAL_ECHOPAIR("  M666 S3 Z", LINEAR_UNIT(endstops.z3_endstop_adj));
-          #if NUM_Z_STEPPER_DRIVERS >= 4
-            CONFIG_ECHO_START();
-            SERIAL_ECHOPAIR("  M666 S4 Z", LINEAR_UNIT(endstops.z4_endstop_adj));
-          #endif
-        #else
-          SERIAL_ECHOLNPAIR_P(SP_Z_STR, LINEAR_UNIT(endstops.z2_endstop_adj));
-        #endif
-      #endif
+    #endif
 
-    #endif // [XYZ]_DUAL_ENDSTOPS
+    #if EITHER(DELTA, HAS_EXTRA_ENDSTOPS)
+      M666_report(forReplay);
+    #endif
 
     #if PREHEAT_COUNT