Add VAKE / VAKE403D support (#15631)

Marlin/src/core/boards.h

@@ -301,6 +301,7 @@
 #define BOARD_BIGTREE_BTT002_V1_0     4208  // BigTreeTech BTT002 v1.0 (STM32F407VE)
 #define BOARD_LERDGE_K                4209  // Lerdge K (STM32F407ZG)
 #define BOARD_LERDGE_X                4210  // Lerdge X (STM32F407VE)
+#define BOARD_VAKE403D                4211  // VAkE 403D (STM32F446VET6)
 
 //
 // ARM Cortex M7

Marlin/src/pins/pins.h

@@ -521,6 +521,8 @@
   #include "stm32/pins_LERDGE_K.h"              // STM32F4                                env:STM32F4
 #elif MB(LERDGE_X)
   #include "stm32/pins_LERDGE_X.h"              // STM32F4                                env:STM32F4
+#elif MB(VAKE403D)
+  #include "stm32/pins_VAKE403D.h"              // STM32F4                                env:STM32F4
 
 //
 // ARM Cortex M7

Marlin/src/pins/stm32/pins_VAKE403D.h

@@ -0,0 +1,194 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#if !defined(STM32F4) && !defined(STM32F4xx)
+  #error "Oops! Select an STM32F4 board in 'Tools > Board.'"
+#elif HOTENDS > 2 || E_STEPPERS > 2
+  #error "STM32F4 supports up to 2 hotends / E-steppers."
+#endif
+
+#define DEFAULT_MACHINE_NAME "STM32F446VET6"
+#define BOARD_NAME           "STM32F4 VAkE"
+
+//#define I2C_EEPROM
+
+#define E2END 0xFFF // EEPROM end address (4kB)
+
+//
+// Servos
+//
+//#define SERVO0_PIN         PE13
+//#define SERVO1_PIN         PE14
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN         PE10
+#define Y_STOP_PIN         PE9
+#define Z_STOP_PIN         PE8
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN  PA4
+#endif
+
+//
+// Filament runout
+//
+#define FIL_RUNOUT_PIN     PA3
+
+//
+// Steppers
+//
+
+#define STEPPER_ENABLE_PIN PB2
+
+#define X_STEP_PIN         PC6   // X_STEP
+#define X_DIR_PIN          PC7   // X_DIR
+#define X_ENABLE_PIN       PB2   //
+#ifndef X_CS_PIN
+  #define X_CS_PIN         PC8   // X_CS
+#endif
+
+#define Y_STEP_PIN         PD9   // Y_STEP
+#define Y_DIR_PIN          PD10  // Y_DIR
+#define Y_ENABLE_PIN       PB2   //
+#ifndef Y_CS_PIN
+  #define Y_CS_PIN         PD11  // Y_CS
+#endif
+
+#define Z_STEP_PIN         PE15  // Z_STEP
+#define Z_DIR_PIN          PB10  // Z_DIR
+#define Z_ENABLE_PIN       PB2
+#ifndef Z_CS_PIN
+  #define Z_CS_PIN         PD8
+#endif
+
+#define E0_STEP_PIN        PB1
+#define E0_DIR_PIN         PB13
+#define E0_ENABLE_PIN      PB2
+#ifndef E0_CS_PIN
+  #define E0_CS_PIN        PE11
+#endif
+
+#define E1_STEP_PIN        PC4
+#define E1_DIR_PIN         PC5
+#define E1_ENABLE_PIN      PB2
+#ifndef E1_CS_PIN
+  #define E1_CS_PIN        PB0
+#endif
+
+#define SCK_PIN            PE12  // PA5   // SPI1 for SD card
+#define MISO_PIN           PE13  // PA6
+#define MOSI_PIN           PE14  // PA7
+
+// added for SD card : optional or not ???
+//#define SD_CHIP_SELECT_PIN SDSS   // The default chip select pin for the SD card is SS.
+// The following three pins must not be redefined for hardware SPI.
+//#define SPI_MOSI_PIN MOSI_PIN       // SPI Master Out Slave In pin
+//#define SPI_MISO_PIN MISO_PIN       // SPI Master In Slave Out pin
+//#define SPI_SCK_PIN SCK_PIN         // SPI Clock pin
+
+//
+// Temperature Sensors (Analog inputs)
+//
+
+#define TEMP_0_PIN         PC0   // Analog Input
+#define TEMP_1_PIN         PC1   // Analog Input
+#define TEMP_2_PIN         PC2   // Analog Input
+#define TEMP_3_PIN         PC3   // Analog Input
+#define TEMP_BED_PIN       PC3   // Analog Input
+
+//
+// Heaters / Fans
+//
+
+#define HEATER_0_PIN       PD15
+#define HEATER_1_PIN       PD14
+#define HEATER_BED_PIN     PD12
+
+#ifndef FAN_PIN
+  #define FAN_PIN          PD13
+#endif
+#define FAN1_PIN           PB5   // PA0
+#define FAN2_PIN           PB4   // PA1
+
+#define ORIG_E0_AUTO_FAN_PIN PD13   // Use this by NOT overriding E0_AUTO_FAN_PIN
+
+//
+// Misc. Functions
+//
+
+//#define CASE_LIGHT_PIN_CI PF13
+//#define CASE_LIGHT_PIN_DO PF14
+//#define NEOPIXEL_PIN      PF13
+
+//
+// Prusa i3 MK2 Multi Material Multiplexer Support
+//
+//#define E_MUX0_PIN         PG3
+//#define E_MUX1_PIN         PG4
+
+#define LED_PIN            PB14   // Alive
+#define PS_ON_PIN          PE0
+#define KILL_PIN           PD5
+#define POWER_LOSS_PIN     PA4   // ?? Power loss / nAC_FAULT
+
+#if ENABLED(SDSUPPORT)
+  #define SD_DETECT_PIN    PB7
+  #define SS_PIN           PB_15  // USD_CS -> CS for onboard SD
+#endif
+
+//
+// LCD / Controller
+//
+#if HAS_SPI_LCD
+  #if ENABLED(SDSUPPORT)
+    #define SDSS           PB6   // CS for SD card in LCD
+  #endif
+  #define BEEPER_PIN       PC9
+  #define LCD_PINS_RS      PC12
+  #define LCD_PINS_ENABLE  PD7
+  #define LCD_PINS_D4      PD1
+  #define LCD_PINS_D5      PD2
+  #define LCD_PINS_D6      PD3
+  #define LCD_PINS_D7      PD4
+  #define BTN_EN1          PD6
+  #define BTN_EN2          PD0
+  #define BTN_ENC          PB12
+#endif
+
+//
+// ST7920 Delays
+//
+#ifndef ST7920_DELAY_1
+  #define ST7920_DELAY_1 DELAY_NS(96)
+#endif
+#ifndef ST7920_DELAY_2
+  #define ST7920_DELAY_2 DELAY_NS(48)
+#endif
+#ifndef ST7920_DELAY_3
+  #define ST7920_DELAY_3 DELAY_NS(715)
+#endif