Reorganized ultralcd menu (10317) (#10360)

Replaced "Prepare" and "Control" menus with "Movement", "Temperature", "Configuration" and "Advanced Settings"

Marlin/src/lcd/language/language_en.h

@@ -61,6 +61,12 @@
 #ifndef MSG_MAIN
   #define MSG_MAIN                            _UxGT("Main")
 #endif
+#ifndef MSG_ADVANCED_SETTINGS
+  #define MSG_ADVANCED_SETTINGS               _UxGT("Advanced Settings")
+#endif
+#ifndef MSG_CONFIGURATION
+  #define MSG_CONFIGURATION                   _UxGT("Configuration")
+#endif
 #ifndef MSG_AUTOSTART
   #define MSG_AUTOSTART                       _UxGT("Autostart")
 #endif

Marlin/src/lcd/ultralcd.cpp

@@ -181,19 +181,19 @@ uint16_t max_display_update_time = 0;
 
   void lcd_main_menu();
   void lcd_tune_menu();
-  void lcd_prepare_menu();
+  void lcd_movement_menu();
   void lcd_move_menu();
-  void lcd_control_menu();
-  void lcd_control_temperature_menu();
-  void lcd_control_motion_menu();
+  void lcd_configuration_menu();
+  void lcd_temperature_menu();
+  void lcd_advanced_settings_menu();
 
   #if DISABLED(SLIM_LCD_MENUS)
-    void lcd_control_temperature_preheat_material1_settings_menu();
-    void lcd_control_temperature_preheat_material2_settings_menu();
+    void lcd_configuration_temperature_preheat_material1_settings_menu();
+    void lcd_configuration_temperature_preheat_material2_settings_menu();
   #endif
 
   #if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE)
-    void lcd_control_filament_menu();
+    void lcd_advanced_filament_menu();
   #endif
 
   #if ENABLED(LCD_INFO_MENU)
@@ -226,7 +226,7 @@ uint16_t max_display_update_time = 0;
 
   #if ENABLED(FWRETRACT)
     #include "../feature/fwretract.h"
-    void lcd_control_retract_menu();
+    void lcd_config_retract_menu();
   #endif
 
   #if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION)
@@ -1093,6 +1093,12 @@ void lcd_quick_feedback(const bool clear_buttons) {
    *
    */
 
+  #if ENABLED(SDSUPPORT) && ENABLED(MENU_ADDAUTOSTART)
+
+    void lcd_autostart_sd() { card.beginautostart(); }
+
+  #endif
+
   void lcd_main_menu() {
     START_MENU();
     MENU_BACK(MSG_WATCH);
@@ -1119,13 +1125,6 @@ void lcd_quick_feedback(const bool clear_buttons) {
         MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light);
     #endif
 
-    if (planner.movesplanned() || IS_SD_PRINTING)
-      MENU_ITEM(submenu, MSG_TUNE, lcd_tune_menu);
-    else
-      MENU_ITEM(submenu, MSG_PREPARE, lcd_prepare_menu);
-
-    MENU_ITEM(submenu, MSG_CONTROL, lcd_control_menu);
-
     #if ENABLED(SDSUPPORT)
       if (card.cardOK) {
         if (card.isFileOpen()) {
@@ -1150,6 +1149,25 @@ void lcd_quick_feedback(const bool clear_buttons) {
       }
     #endif // SDSUPPORT
 
+    if (planner.movesplanned() || IS_SD_PRINTING)
+      MENU_ITEM(submenu, MSG_TUNE, lcd_tune_menu);
+    else {
+      MENU_ITEM(submenu, MSG_MOTION, lcd_movement_menu);
+      MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_temperature_menu);
+      MENU_ITEM(submenu, MSG_CONFIGURATION, lcd_configuration_menu);
+    }
+
+    #if ENABLED(ADVANCED_PAUSE_FEATURE)
+      #if E_STEPPERS == 1 && DISABLED(FILAMENT_LOAD_UNLOAD_GCODES)
+        if (thermalManager.targetHotEnoughToExtrude(active_extruder))
+          MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600 B0"));
+        else
+          MENU_ITEM(submenu, MSG_FILAMENTCHANGE, lcd_temp_menu_e0_filament_change);
+      #else
+        MENU_ITEM(submenu, MSG_FILAMENTCHANGE, lcd_change_filament_menu);
+      #endif
+    #endif
+
     #if ENABLED(LCD_INFO_MENU)
       MENU_ITEM(submenu, MSG_INFO_MENU, lcd_info_menu);
     #endif
@@ -1158,6 +1176,23 @@ void lcd_quick_feedback(const bool clear_buttons) {
       MENU_ITEM(submenu, MSG_LED_CONTROL, lcd_led_menu);
     #endif
 
+    //
+    // Switch power on/off
+    //
+    #if HAS_POWER_SWITCH
+      if (powersupply_on)
+        MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81"));
+      else
+        MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80"));
+    #endif
+
+    //
+    // Autostart
+    //
+    #if ENABLED(SDSUPPORT) && ENABLED(MENU_ADDAUTOSTART)
+      MENU_ITEM(function, MSG_AUTOSTART, lcd_autostart_sd);
+    #endif
+
     END_MENU();
   }
 
@@ -1167,17 +1202,6 @@ void lcd_quick_feedback(const bool clear_buttons) {
    *
    */
 
-  #if HAS_M206_COMMAND
-    /**
-     * Set the home offset based on the current_position
-     */
-    void lcd_set_home_offsets() {
-      // M428 Command
-      enqueue_and_echo_commands_P(PSTR("M428"));
-      lcd_return_to_status();
-    }
-  #endif
-
   #if ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) || ENABLED(MESH_EDIT_GFX_OVERLAY)
 
     void _lcd_zoffset_overlay_gfx(const float zvalue) {
@@ -1511,20 +1535,6 @@ void lcd_quick_feedback(const bool clear_buttons) {
       #endif
     #endif
 
-    //
-    // Change filament
-    //
-    #if ENABLED(ADVANCED_PAUSE_FEATURE)
-      #if E_STEPPERS == 1 && DISABLED(FILAMENT_LOAD_UNLOAD_GCODES)
-        if (thermalManager.targetHotEnoughToExtrude(active_extruder))
-          MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600 B0"));
-        else
-          MENU_ITEM(submenu, MSG_FILAMENTCHANGE, lcd_temp_menu_e0_filament_change);
-      #else
-        MENU_ITEM(submenu, MSG_FILAMENTCHANGE, lcd_change_filament_menu);
-      #endif
-    #endif
-
     END_MENU();
   }
 
@@ -1578,7 +1588,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
   /**
    *
-   * "Prepare" submenu items
+   * "Temperature" submenu items
    *
    */
   void _lcd_preheat(const int16_t endnum, const int16_t temph, const int16_t tempb, const int16_t fan) {
@@ -1691,7 +1701,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
     void lcd_preheat_m1_menu() {
       START_MENU();
-      MENU_BACK(MSG_PREPARE);
+      MENU_BACK(MSG_TEMPERATURE);
       #if HOTENDS == 1
         #if HAS_HEATED_BED
           MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_m1_e0);
@@ -1743,7 +1753,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
     void lcd_preheat_m2_menu() {
       START_MENU();
-      MENU_BACK(MSG_PREPARE);
+      MENU_BACK(MSG_TEMPERATURE);
       #if HOTENDS == 1
         #if HAS_HEATED_BED
           MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0);
@@ -1823,12 +1833,6 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
   #endif
 
-  #if ENABLED(SDSUPPORT) && ENABLED(MENU_ADDAUTOSTART)
-
-    void lcd_autostart_sd() { card.beginautostart(); }
-
-  #endif
-
   #if ENABLED(EEPROM_SETTINGS)
     static void lcd_store_settings()   { lcd_completion_feedback(settings.save()); }
     static void lcd_load_settings()    { lcd_completion_feedback(settings.load()); }
@@ -1898,7 +1902,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
     /**
      *
-     * "Prepare" > "Level Bed" handlers
+     * "Motion" > "Level Bed" handlers
      *
      */
 
@@ -2545,7 +2549,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
     /**
      * UBL System submenu
      *
-     * << Prepare
+     * << Motion
      *  - Manually Build Mesh >>
      *  - Activate UBL >>
      *  - Deactivate UBL >>
@@ -2558,7 +2562,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
     void _lcd_ubl_level_bed() {
       START_MENU();
-      MENU_BACK(MSG_PREPARE);
+      MENU_BACK(MSG_MOTION);
       MENU_ITEM(gcode, MSG_UBL_ACTIVATE_MESH, PSTR("G29 A"));
       MENU_ITEM(gcode, MSG_UBL_DEACTIVATE_MESH, PSTR("G29 D"));
       MENU_ITEM(submenu, MSG_UBL_STEP_BY_STEP_MENU, _lcd_ubl_step_by_step);
@@ -2585,7 +2589,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
     /**
      * Step 1: Bed Level entry-point
      *
-     * << Prepare
+     * << Motion
      *    Auto Home           (if homing needed)
      *    Leveling On/Off     (if data exists, and homed)
      *    Fade Height: ---    (Req: ENABLE_LEVELING_FADE_HEIGHT)
@@ -2598,7 +2602,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
      */
     void lcd_bed_leveling() {
       START_MENU();
-      MENU_BACK(MSG_PREPARE);
+      MENU_BACK(MSG_MOTION);
 
       const bool is_homed = all_axes_known();
 
@@ -2656,11 +2660,11 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
   /**
    *
-   * "Prepare" submenu
+   * "Movement" submenu
    *
    */
 
-  void lcd_prepare_menu() {
+  void lcd_movement_menu() {
     START_MENU();
 
     //
@@ -2727,92 +2731,11 @@ void lcd_quick_feedback(const bool clear_buttons) {
         MENU_ITEM(function, MSG_LEVEL_CORNERS, _lcd_level_bed_corners);
     #endif
 
-    #if HAS_M206_COMMAND && DISABLED(SLIM_LCD_MENUS)
-      //
-      // Set Home Offsets
-      //
-      MENU_ITEM(function, MSG_SET_HOME_OFFSETS, lcd_set_home_offsets);
-    #endif
-
     //
     // Disable Steppers
     //
     MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84"));
 
-    //
-    // Change filament
-    //
-    #if ENABLED(ADVANCED_PAUSE_FEATURE)
-      if (!IS_SD_FILE_OPEN) {
-        #if E_STEPPERS == 1 && DISABLED(FILAMENT_LOAD_UNLOAD_GCODES)
-          if (thermalManager.targetHotEnoughToExtrude(active_extruder))
-            MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600 B0"));
-          else
-            MENU_ITEM(submenu, MSG_FILAMENTCHANGE, lcd_temp_menu_e0_filament_change);
-        #else
-          MENU_ITEM(submenu, MSG_FILAMENTCHANGE, lcd_change_filament_menu);
-        #endif
-      }
-    #endif // ADVANCED_PAUSE_FEATURE
-
-    #if HAS_TEMP_HOTEND
-
-      //
-      // Cooldown
-      //
-      bool has_heat = false;
-      HOTEND_LOOP() if (thermalManager.target_temperature[HOTEND_INDEX]) { has_heat = true; break; }
-      #if HAS_HEATED_BED
-        if (thermalManager.target_temperature_bed) has_heat = true;
-      #endif
-      if (has_heat) MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown);
-
-      //
-      // Preheat for Material 1 and 2
-      //
-      #if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_4 != 0 || HAS_HEATED_BED
-        MENU_ITEM(submenu, MSG_PREHEAT_1, lcd_preheat_m1_menu);
-        MENU_ITEM(submenu, MSG_PREHEAT_2, lcd_preheat_m2_menu);
-      #else
-        MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_m1_e0_only);
-        MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0_only);
-      #endif
-
-    #endif // HAS_TEMP_HOTEND
-
-    //
-    // BLTouch Self-Test and Reset
-    //
-    #if ENABLED(BLTOUCH)
-      MENU_ITEM(gcode, MSG_BLTOUCH_SELFTEST, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_SELFTEST)));
-      if (!endstops.z_probe_enabled && TEST_BLTOUCH())
-        MENU_ITEM(gcode, MSG_BLTOUCH_RESET, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_RESET)));
-    #endif
-
-    //
-    // Switch power on/off
-    //
-    #if HAS_POWER_SWITCH
-      if (powersupply_on)
-        MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81"));
-      else
-        MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80"));
-    #endif
-
-    //
-    // Autostart
-    //
-    #if ENABLED(SDSUPPORT) && ENABLED(MENU_ADDAUTOSTART)
-      MENU_ITEM(function, MSG_AUTOSTART, lcd_autostart_sd);
-    #endif
-
-    //
-    // Delta Calibration
-    //
-    #if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION)
-      MENU_ITEM(submenu, MSG_DELTA_CALIBRATE, lcd_delta_calibrate_menu);
-    #endif
-
     END_MENU();
   }
 
@@ -2991,7 +2914,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
   /**
    *
-   * "Prepare" > "Move Axis" submenu
+   * "Motion" > "Move Axis" submenu
    *
    */
 
@@ -3143,7 +3066,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
   /**
    *
-   * "Prepare" > "Move Xmm" > "Move XYZ" submenu
+   * "Motion" > "Move Xmm" > "Move XYZ" submenu
    *
    */
 
@@ -3199,7 +3122,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
   /**
    *
-   * "Prepare" > "Move Axis" submenu
+   * "Motion" > "Move Axis" submenu
    *
    */
 
@@ -3221,7 +3144,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
   void lcd_move_menu() {
     START_MENU();
-    MENU_BACK(MSG_PREPARE);
+    MENU_BACK(MSG_MOTION);
 
     #if HAS_SOFTWARE_ENDSTOPS && ENABLED(SOFT_ENDSTOPS_MENU_ITEM)
       MENU_ITEM_EDIT(bool, MSG_LCD_SOFT_ENDSTOPS, &soft_endstops_enabled);
@@ -3310,7 +3233,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
   /**
    *
-   * "Control" submenu
+   * "Configuration" submenu
    *
    */
 
@@ -3332,30 +3255,31 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
     static void lcd_init_eeprom_confirm() {
       START_MENU();
-      MENU_BACK(MSG_CONTROL);
+      MENU_BACK(MSG_ADVANCED_SETTINGS);
       MENU_ITEM(function, MSG_INIT_EEPROM, lcd_init_eeprom);
       END_MENU();
     }
 
   #endif
 
-  void lcd_control_menu() {
+  void lcd_configuration_menu() {
     START_MENU();
     MENU_BACK(MSG_MAIN);
-    MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu);
-    MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu);
 
-    #if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE)
-      MENU_ITEM(submenu, MSG_FILAMENT, lcd_control_filament_menu);
-    #elif ENABLED(LIN_ADVANCE)
-      MENU_ITEM_EDIT(float52, MSG_ADVANCE_K, &planner.extruder_advance_K, 0, 999);
+    MENU_ITEM(submenu, MSG_ADVANCED_SETTINGS, lcd_advanced_settings_menu);
+
+    //
+    // Delta Calibration
+    //
+    #if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION)
+      MENU_ITEM(submenu, MSG_DELTA_CALIBRATE, lcd_delta_calibrate_menu);
     #endif
 
     #if HAS_LCD_CONTRAST
       MENU_ITEM_EDIT_CALLBACK(int3, MSG_CONTRAST, &lcd_contrast, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX, lcd_callback_set_contrast, true);
     #endif
     #if ENABLED(FWRETRACT)
-      MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu);
+      MENU_ITEM(submenu, MSG_RETRACT, lcd_config_retract_menu);
     #endif
     #if ENABLED(DAC_STEPPER_CURRENT)
       MENU_ITEM(submenu, MSG_DRIVE_STRENGTH, lcd_dac_menu);
@@ -3368,6 +3292,12 @@ void lcd_quick_feedback(const bool clear_buttons) {
       MENU_ITEM(submenu, MSG_BLTOUCH, bltouch_menu);
     #endif
 
+    #if DISABLED(SLIM_LCD_MENUS)
+      // Preheat configurations
+      MENU_ITEM(submenu, MSG_PREHEAT_1_SETTINGS, lcd_configuration_temperature_preheat_material1_settings_menu);
+      MENU_ITEM(submenu, MSG_PREHEAT_2_SETTINGS, lcd_configuration_temperature_preheat_material2_settings_menu);
+    #endif
+
     #if ENABLED(EEPROM_SETTINGS)
       MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings);
       MENU_ITEM(function, MSG_LOAD_EEPROM, lcd_load_settings);
@@ -3375,10 +3305,6 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
     MENU_ITEM(function, MSG_RESTORE_FAILSAFE, lcd_factory_settings);
 
-    #if ENABLED(EEPROM_SETTINGS) && DISABLED(SLIM_LCD_MENUS)
-      MENU_ITEM(submenu, MSG_INIT_EEPROM, lcd_init_eeprom_confirm);
-    #endif
-
     END_MENU();
   }
 
@@ -3464,16 +3390,12 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
   /**
    *
-   * "Control" > "Temperature" submenu
+   * "Temperature" submenu
    *
    */
-  void lcd_control_temperature_menu() {
+  void lcd_temperature_menu() {
     START_MENU();
-
-    //
-    // ^ Control
-    //
-    MENU_BACK(MSG_CONTROL);
+    MENU_BACK(MSG_MAIN);
 
     //
     // Nozzle:
@@ -3526,6 +3448,42 @@ void lcd_quick_feedback(const bool clear_buttons) {
       #endif
     #endif // FAN_COUNT > 0
 
+    #if HAS_TEMP_HOTEND
+
+      //
+      // Cooldown
+      //
+      bool has_heat = false;
+      HOTEND_LOOP() if (thermalManager.target_temperature[HOTEND_INDEX]) { has_heat = true; break; }
+      #if HAS_TEMP_BED
+        if (thermalManager.target_temperature_bed) has_heat = true;
+      #endif
+      if (has_heat) MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown);
+
+      //
+      // Preheat for Material 1 and 2
+      //
+      #if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_4 != 0 || HAS_HEATED_BED
+        MENU_ITEM(submenu, MSG_PREHEAT_1, lcd_preheat_m1_menu);
+        MENU_ITEM(submenu, MSG_PREHEAT_2, lcd_preheat_m2_menu);
+      #else
+        MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_m1_e0_only);
+        MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0_only);
+      #endif
+
+    #endif // HAS_TEMP_HOTEND
+
+    END_MENU();
+  }
+
+  /**
+   *
+   * "Advanced Settings" -> "Temperature" submenu
+   *
+   */
+  void lcd_advanced_temperature_menu() {
+    START_MENU();
+    MENU_BACK(MSG_ADVANCED_SETTINGS);
     //
     // Autotemp, Min, Max, Fact
     //
@@ -3587,24 +3545,12 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
     #endif // PIDTEMP
 
-    #if DISABLED(SLIM_LCD_MENUS)
-      //
-      // Preheat Material 1 conf
-      //
-      MENU_ITEM(submenu, MSG_PREHEAT_1_SETTINGS, lcd_control_temperature_preheat_material1_settings_menu);
-
-      //
-      // Preheat Material 2 conf
-      //
-      MENU_ITEM(submenu, MSG_PREHEAT_2_SETTINGS, lcd_control_temperature_preheat_material2_settings_menu);
-    #endif
-
     END_MENU();
   }
 
   #if DISABLED(SLIM_LCD_MENUS)
 
-    void _lcd_control_temperature_preheat_settings_menu(const uint8_t material) {
+    void _lcd_configuration_temperature_preheat_settings_menu(const uint8_t material) {
       #if HOTENDS > 4
         #define MINTEMP_ALL MIN5(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP)
         #define MAXTEMP_ALL MAX5(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP)
@@ -3622,7 +3568,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
         #define MAXTEMP_ALL HEATER_0_MAXTEMP
       #endif
       START_MENU();
-      MENU_BACK(MSG_TEMPERATURE);
+      MENU_BACK(MSG_CONFIGURATION);
       MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &lcd_preheat_fan_speed[material], 0, 255);
       #if HAS_TEMP_HOTEND
         MENU_ITEM_EDIT(int3, MSG_NOZZLE, &lcd_preheat_hotend_temp[material], MINTEMP_ALL, MAXTEMP_ALL - 15);
@@ -3641,14 +3587,14 @@ void lcd_quick_feedback(const bool clear_buttons) {
      * "Temperature" > "Preheat Material 1 conf" submenu
      *
      */
-    void lcd_control_temperature_preheat_material1_settings_menu() { _lcd_control_temperature_preheat_settings_menu(0); }
+    void lcd_configuration_temperature_preheat_material1_settings_menu() { _lcd_configuration_temperature_preheat_settings_menu(0); }
 
     /**
      *
      * "Temperature" > "Preheat Material 2 conf" submenu
      *
      */
-    void lcd_control_temperature_preheat_material2_settings_menu() { _lcd_control_temperature_preheat_settings_menu(1); }
+    void lcd_configuration_temperature_preheat_material2_settings_menu() { _lcd_configuration_temperature_preheat_settings_menu(1); }
 
     void _reset_acceleration_rates() { planner.reset_acceleration_rates(); }
     #if ENABLED(DISTINCT_E_FACTORS)
@@ -3688,9 +3634,9 @@ void lcd_quick_feedback(const bool clear_buttons) {
     #endif
 
     // M203 / M205 Velocity options
-    void lcd_control_motion_velocity_menu() {
+    void lcd_advanced_velocity_menu() {
       START_MENU();
-      MENU_BACK(MSG_MOTION);
+      MENU_BACK(MSG_ADVANCED_SETTINGS);
 
       // M203 Max Feedrate
       MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VMAX MSG_A, &planner.max_feedrate_mm_s[A_AXIS], 1, 999);
@@ -3724,9 +3670,9 @@ void lcd_quick_feedback(const bool clear_buttons) {
     }
 
     // M201 / M204 Accelerations
-    void lcd_control_motion_acceleration_menu() {
+    void lcd_advanced_acceleration_menu() {
       START_MENU();
-      MENU_BACK(MSG_MOTION);
+      MENU_BACK(MSG_ADVANCED_SETTINGS);
 
       // M204 P Acceleration
       MENU_MULTIPLIER_ITEM_EDIT(float5, MSG_ACC, &planner.acceleration, 10, 99000);
@@ -3763,9 +3709,9 @@ void lcd_quick_feedback(const bool clear_buttons) {
     }
 
     // M205 Jerk
-    void lcd_control_motion_jerk_menu() {
+    void lcd_advanced_jerk_menu() {
       START_MENU();
-      MENU_BACK(MSG_MOTION);
+      MENU_BACK(MSG_ADVANCED_SETTINGS);
 
       #if ENABLED(JUNCTION_DEVIATION)
         MENU_ITEM_EDIT_CALLBACK(float43, MSG_JUNCTION_DEVIATION, &planner.junction_deviation_mm, 0.01f, 0.3f, planner.recalculate_max_e_jerk);
@@ -3784,9 +3730,9 @@ void lcd_quick_feedback(const bool clear_buttons) {
     }
 
     // M92 Steps-per-mm
-    void lcd_control_motion_steps_per_mm_menu() {
+    void lcd_advanced_steps_per_mm_menu() {
       START_MENU();
-      MENU_BACK(MSG_MOTION);
+      MENU_BACK(MSG_ADVANCED_SETTINGS);
 
       MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ASTEPS, &planner.axis_steps_per_mm[A_AXIS], 5, 9999, _planner_refresh_positioning);
       MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_BSTEPS, &planner.axis_steps_per_mm[B_AXIS], 5, 9999, _planner_refresh_positioning);
@@ -3816,13 +3762,24 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
   /**
    *
-   * "Control" > "Motion" submenu
+   * "Advanced Settings" submenu
    *
    */
 
-  void lcd_control_motion_menu() {
+  #if HAS_M206_COMMAND
+    /**
+     * Set the home offset based on the current_position
+     */
+    void lcd_set_home_offsets() {
+      // M428 Command
+      enqueue_and_echo_commands_P(PSTR("M428"));
+      lcd_return_to_status();
+    }
+  #endif
+
+  void lcd_advanced_settings_menu() {
     START_MENU();
-    MENU_BACK(MSG_CONTROL);
+    MENU_BACK(MSG_CONFIGURATION);
 
     #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
       MENU_ITEM(submenu, MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset);
@@ -3832,37 +3789,65 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
     #if DISABLED(SLIM_LCD_MENUS)
 
+      #if HAS_M206_COMMAND
+        //
+        // Set Home Offsets
+        //
+        MENU_ITEM(function, MSG_SET_HOME_OFFSETS, lcd_set_home_offsets);
+      #endif
+
       // M203 / M205 - Feedrate items
-      MENU_ITEM(submenu, MSG_VELOCITY, lcd_control_motion_velocity_menu);
+      MENU_ITEM(submenu, MSG_VELOCITY, lcd_advanced_velocity_menu);
 
       // M201 - Acceleration items
-      MENU_ITEM(submenu, MSG_ACCELERATION, lcd_control_motion_acceleration_menu);
+      MENU_ITEM(submenu, MSG_ACCELERATION, lcd_advanced_acceleration_menu);
 
       // M205 - Max Jerk
-      MENU_ITEM(submenu, MSG_JERK, lcd_control_motion_jerk_menu);
+      MENU_ITEM(submenu, MSG_JERK, lcd_advanced_jerk_menu);
 
       // M92 - Steps Per mm
-      MENU_ITEM(submenu, MSG_STEPS_PER_MM, lcd_control_motion_steps_per_mm_menu);
+      MENU_ITEM(submenu, MSG_STEPS_PER_MM, lcd_advanced_steps_per_mm_menu);
 
     #endif // !SLIM_LCD_MENUS
 
+    MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_advanced_temperature_menu);
+
+    #if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE)
+      MENU_ITEM(submenu, MSG_FILAMENT, lcd_advanced_filament_menu);
+    #elif ENABLED(LIN_ADVANCE)
+      MENU_ITEM_EDIT(float32, MSG_ADVANCE_K, &planner.extruder_advance_K, 0, 999);
+    #endif
+
     // M540 S - Abort on endstop hit when SD printing
     #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
       MENU_ITEM_EDIT(bool, MSG_ENDSTOP_ABORT, &planner.abort_on_endstop_hit);
     #endif
 
+    //
+    // BLTouch Self-Test and Reset
+    //
+    #if ENABLED(BLTOUCH)
+      MENU_ITEM(gcode, MSG_BLTOUCH_SELFTEST, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_SELFTEST)));
+      if (!endstops.z_probe_enabled && TEST_BLTOUCH())
+        MENU_ITEM(gcode, MSG_BLTOUCH_RESET, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_RESET)));
+    #endif
+
+    #if ENABLED(EEPROM_SETTINGS) && DISABLED(SLIM_LCD_MENUS)
+      MENU_ITEM(submenu, MSG_INIT_EEPROM, lcd_init_eeprom_confirm);
+    #endif
+
     END_MENU();
   }
 
   #if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE)
     /**
      *
-     * "Control" > "Filament" submenu
+     * "Advanced Settings" > "Filament" submenu
      *
      */
-    void lcd_control_filament_menu() {
+    void lcd_advanced_filament_menu() {
       START_MENU();
-      MENU_BACK(MSG_CONTROL);
+      MENU_BACK(MSG_ADVANCED_SETTINGS);
 
       #if ENABLED(LIN_ADVANCE)
         MENU_ITEM_EDIT(float52, MSG_ADVANCE_K, &planner.extruder_advance_K, 0, 999);
@@ -3941,12 +3926,12 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
   /**
    *
-   * "Control" > "Retract" submenu
+   * "Configuration" > "Retract" submenu
    *
    */
   #if ENABLED(FWRETRACT)
 
-    void lcd_control_retract_menu() {
+    void lcd_config_retract_menu() {
       START_MENU();
       MENU_BACK(MSG_CONTROL);
       MENU_ITEM_EDIT_CALLBACK(bool, MSG_AUTORETRACT, &fwretract.autoretract_enabled, fwretract.refresh_autoretract);
@@ -4378,7 +4363,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
     #if E_STEPPERS > 1 || ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
       void lcd_change_filament_menu() {
         START_MENU();
-        MENU_BACK(MSG_PREPARE);
+        MENU_BACK(MSG_MAIN);
 
         // Change filament
         #if E_STEPPERS == 1