Update Polish language (#17525)

Marlin/src/lcd/language/language_pl.h

   PROGMEM Language_Str MSG_G26_HEATING_NOZZLE              = _UxGT("G26 Nagrzewanie dyszy");
   PROGMEM Language_Str MSG_G26_MANUAL_PRIME                = _UxGT("Napełnianie ręczne...");
   PROGMEM Language_Str MSG_G26_FIXED_LENGTH                = _UxGT("Napełnij kreśloną długością");
-  PROGMEM Language_Str MSG_G26_PRIME_DONE                  = _UxGT("Napełianie zakończone");
+  PROGMEM Language_Str MSG_G26_PRIME_DONE                  = _UxGT("Napełnianie zakończone");
   PROGMEM Language_Str MSG_G26_CANCELED                    = _UxGT("G26 Przewane");
   PROGMEM Language_Str MSG_G26_LEAVING                     = _UxGT("Opuszczanie G26");
   PROGMEM Language_Str MSG_UBL_CONTINUE_MESH               = _UxGT("Kontynuuj tworzenie siatki");
   PROGMEM Language_Str MSG_UBL_FINE_TUNE_CLOSEST           = _UxGT("Dostrajaj najbliższy");
   PROGMEM Language_Str MSG_UBL_STORAGE_MESH_MENU           = _UxGT("Przechowywanie siatki");
   PROGMEM Language_Str MSG_UBL_STORAGE_SLOT                = _UxGT("Slot Pamięci");
-  PROGMEM Language_Str MSG_UBL_LOAD_MESH                   = _UxGT("Załaduj siatke stołu");
-  PROGMEM Language_Str MSG_UBL_SAVE_MESH                   = _UxGT("Zapisz siatke stołu");
+  PROGMEM Language_Str MSG_UBL_LOAD_MESH                   = _UxGT("Załaduj siatkę stołu");
+  PROGMEM Language_Str MSG_UBL_SAVE_MESH                   = _UxGT("Zapisz siatkę stołu");
   PROGMEM Language_Str MSG_MESH_LOADED                     = _UxGT("Siatka %i załadowana");
-  PROGMEM Language_Str MSG_MESH_SAVED                      = _UxGT("Siatka %i Zapisana");
+  PROGMEM Language_Str MSG_MESH_SAVED                      = _UxGT("Siatka %i zapisana");
   PROGMEM Language_Str MSG_UBL_NO_STORAGE                  = _UxGT("Brak magazynu");
   PROGMEM Language_Str MSG_UBL_SAVE_ERROR                  = _UxGT("Błąd: Zapis UBL");
   PROGMEM Language_Str MSG_UBL_RESTORE_ERROR               = _UxGT("Bład: Odczyt UBL");
   PROGMEM Language_Str MSG_UBL_Z_OFFSET                    = _UxGT("Przesunięcie Z: ");
   PROGMEM Language_Str MSG_UBL_Z_OFFSET_STOPPED            = _UxGT("Przesunięcie Z zatrzymane");
   PROGMEM Language_Str MSG_UBL_STEP_BY_STEP_MENU           = _UxGT("UBL Krok po kroku");
-  PROGMEM Language_Str MSG_UBL_1_BUILD_COLD_MESH           = _UxGT("1. Tworzeni ezimnej siatki");
+  PROGMEM Language_Str MSG_UBL_1_BUILD_COLD_MESH           = _UxGT("1. Tworzenie zimnej siatki");
   PROGMEM Language_Str MSG_UBL_2_SMART_FILLIN              = _UxGT("2. Inteligentne wypełnienie");
   PROGMEM Language_Str MSG_UBL_3_VALIDATE_MESH_MENU        = _UxGT("3. Sprawdzenie siatki");
   PROGMEM Language_Str MSG_UBL_4_FINE_TUNE_ALL             = _UxGT("4. Dostrojenie wszystkiego");
   PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED              = _UxGT("E w mm³");
   PROGMEM Language_Str MSG_FILAMENT_DIAM                   = _UxGT("Śr. fil.");
   PROGMEM Language_Str MSG_FILAMENT_DIAM_E                 = _UxGT("Śr. fil. *");
-  PROGMEM Language_Str MSG_FILAMENT_UNLOAD                 = _UxGT("Wyładuj mm");
-  PROGMEM Language_Str MSG_FILAMENT_LOAD                   = _UxGT("Załaduj mm");
+  PROGMEM Language_Str MSG_FILAMENT_UNLOAD                 = _UxGT("Wysuń mm");
+  PROGMEM Language_Str MSG_FILAMENT_LOAD                   = _UxGT("Wsuń mm");
   PROGMEM Language_Str MSG_ADVANCE_K                       = _UxGT("Advance K");
   PROGMEM Language_Str MSG_ADVANCE_K_E                     = _UxGT("Advance K *");
   PROGMEM Language_Str MSG_CONTRAST                        = _UxGT("Kontrast LCD");
   PROGMEM Language_Str MSG_NOZZLE_STANDBY                  = _UxGT("Dysza w oczekiwaniu");
   PROGMEM Language_Str MSG_FILAMENTCHANGE                  = _UxGT("Zmień filament");
   PROGMEM Language_Str MSG_FILAMENTCHANGE_E                = _UxGT("Zmień filament *");
-  PROGMEM Language_Str MSG_FILAMENTLOAD                    = _UxGT("Załaduj Filament");
-  PROGMEM Language_Str MSG_FILAMENTLOAD_E                  = _UxGT("Załaduj Filament *");
-  PROGMEM Language_Str MSG_FILAMENTUNLOAD                  = _UxGT("Wyładuj Filament");
-  PROGMEM Language_Str MSG_FILAMENTUNLOAD_E                = _UxGT("Wyładuj Filament *");
-  PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL              = _UxGT("Wyładuj wszystkie");
+  PROGMEM Language_Str MSG_FILAMENTLOAD                    = _UxGT("Wsuń Filament");
+  PROGMEM Language_Str MSG_FILAMENTLOAD_E                  = _UxGT("Wsuń Filament *");
+  PROGMEM Language_Str MSG_FILAMENTUNLOAD                  = _UxGT("Wysuń Filament");
+  PROGMEM Language_Str MSG_FILAMENTUNLOAD_E                = _UxGT("Wysuń Filament *");
+  PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL              = _UxGT("Wysuń wszystkie");
   PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Inicjal. karty SD");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Zmiana karty SD");
   PROGMEM Language_Str MSG_RELEASE_MEDIA                   = _UxGT("Zwolnienie karty");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V           = _UxGT("Set BLTouch to 5V");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD           = _UxGT("Set BLTouch to OD");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO               = _UxGT("Report Drain");
-  PROGMEM Language_Str MSG_BLTOUCH_MODE_CHANGE             = _UxGT("NIEBEZPIECZNE: Złe ustawienia mogą uszkodzić drukarkę. Kontynuować?");
+  PROGMEM Language_Str MSG_BLTOUCH_MODE_CHANGE             = _UxGT("UWAGA: Złe ustawienia mogą uszkodzić drukarkę. Kontynuować?");
   PROGMEM Language_Str MSG_TOUCHMI_PROBE                   = _UxGT("TouchMI");
   PROGMEM Language_Str MSG_TOUCHMI_INIT                    = _UxGT("Init TouchMI");
   PROGMEM Language_Str MSG_TOUCHMI_ZTEST                   = _UxGT("Z Offset Test");
   PROGMEM Language_Str MSG_DAC_EEPROM_WRITE                = _UxGT("Zapisz DAC EEPROM");
   PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER          = _UxGT("ZMIEŃ FILAMENT");
   PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_PAUSE    = _UxGT("WYDRUK WSTRZYMANY");
-  PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_LOAD     = _UxGT("ZAŁADUJ FILAMENT");
-  PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_UNLOAD   = _UxGT("WYŁADUJ FILAMENT");
+  PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_LOAD     = _UxGT("WSUŃ FILAMENT");
+  PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_UNLOAD   = _UxGT("WYSUŃ FILAMENT");
   PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_HEADER   = _UxGT("OPCJE WZNOWIENIA:");
   PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_PURGE    = _UxGT("Oczyść więcej");
   PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME   = _UxGT("Kontynuuj");
   PROGMEM Language_Str MSG_MMU2_NOT_RESPONDING             = _UxGT("MMU wymaga uwagi.");
   PROGMEM Language_Str MSG_MMU2_RESUME                     = _UxGT("Wznów wydruk");
   PROGMEM Language_Str MSG_MMU2_RESUMING                   = _UxGT("Wznawianie...");
-  PROGMEM Language_Str MSG_MMU2_LOAD_FILAMENT              = _UxGT("Załaduj filament");
-  PROGMEM Language_Str MSG_MMU2_LOAD_ALL                   = _UxGT("Załaduj wszystko");
-  PROGMEM Language_Str MSG_MMU2_LOAD_TO_NOZZLE             = _UxGT("Załaduj do dyszy");
+  PROGMEM Language_Str MSG_MMU2_LOAD_FILAMENT              = _UxGT("Wsuń filament");
+  PROGMEM Language_Str MSG_MMU2_LOAD_ALL                   = _UxGT("Wsuń wszystko");
+  PROGMEM Language_Str MSG_MMU2_LOAD_TO_NOZZLE             = _UxGT("Wsuń do dyszy");
   PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT             = _UxGT("Wysuń filament");
   PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT_N           = _UxGT("Wysuń filament ~");
-  PROGMEM Language_Str MSG_MMU2_UNLOAD_FILAMENT            = _UxGT("Wyładuj filament");
-  PROGMEM Language_Str MSG_MMU2_LOADING_FILAMENT           = _UxGT("Ładowanie fil. %i...");
+  PROGMEM Language_Str MSG_MMU2_UNLOAD_FILAMENT            = _UxGT("Wysuń filament");
+  PROGMEM Language_Str MSG_MMU2_LOADING_FILAMENT           = _UxGT("Wsuwanie fil. %i...");
   PROGMEM Language_Str MSG_MMU2_EJECTING_FILAMENT          = _UxGT("Wysuwanie fil. ...");
-  PROGMEM Language_Str MSG_MMU2_UNLOADING_FILAMENT         = _UxGT("Wyładowywanie fil....");
+  PROGMEM Language_Str MSG_MMU2_UNLOADING_FILAMENT         = _UxGT("Wysuwanie fil....");
   PROGMEM Language_Str MSG_MMU2_ALL                        = _UxGT("Wszystko");
   PROGMEM Language_Str MSG_MMU2_FILAMENT_N                 = _UxGT("Filament ~");
   PROGMEM Language_Str MSG_MMU2_RESET                      = _UxGT("Resetuj MMU");
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT          = _UxGT(MSG_1_LINE("Kliknij by nagrzać"));
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING       = _UxGT(MSG_1_LINE("Nagrzewanie..."));
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD        = _UxGT(MSG_1_LINE("Wysuwanie..."));
-    PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD          = _UxGT(MSG_1_LINE("Ładowanie..."));
+    PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD          = _UxGT(MSG_1_LINE("Wsuwanie..."));
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE         = _UxGT(MSG_1_LINE("Oczyszczanie..."));
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE    = _UxGT(MSG_1_LINE("Kliknij by zakończyć"));
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME        = _UxGT(MSG_1_LINE("Wznawianie..."));