thomas
/
marlin
Tarkkaile 1
Äänestä 0
Fork 0
Koodi Ongelmat 0 Pull-pyynnöt 0 Julkaisut 0 Wiki Activity
Selaa lähdekoodia

Remove Z2 pins overrides from Configuration_adv.h

Scott Lahteine 9 vuotta sitten
vanhempi
f7f6b5faae
commit
11a065c0ca
14 muutettua tiedostoa jossa 0 lisäystä ja 56 poistoa
Yhdistetty näkymä Näytä diff tilastot
  1. 0
    4
      Marlin/Configuration_adv.h
  2. 0
    4
      Marlin/configurator/config/Configuration_adv.h
  3. 0
    4
      Marlin/example_configurations/Felix/Configuration_adv.h
  4. 0
    4
      Marlin/example_configurations/Hephestos/Configuration_adv.h
  5. 0
    4
      Marlin/example_configurations/K8200/Configuration_adv.h
  6. 0
    4
      Marlin/example_configurations/RigidBot/Configuration_adv.h
  7. 0
    4
      Marlin/example_configurations/SCARA/Configuration_adv.h
  8. 0
    4
      Marlin/example_configurations/TAZ4/Configuration_adv.h
  9. 0
    4
      Marlin/example_configurations/WITBOX/Configuration_adv.h
  10. 0
    4
      Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
  11. 0
    4
      Marlin/example_configurations/delta/generic/Configuration_adv.h
  12. 0
    4
      Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
  13. 0
    4
      Marlin/example_configurations/makibox/Configuration_adv.h
  14. 0
    4
      Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

+ 0
- 4
Marlin/Configuration_adv.h Näytä tiedosto

144 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
 144 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
145 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 145 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
146
146
147 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
148 
-  #define Z2_DIR_PIN E2_DIR_PIN
149 
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
150 
-
151 
   // #define Z_DUAL_ENDSTOPS
 147 
   // #define Z_DUAL_ENDSTOPS
152
148
153 
   #if ENABLED(Z_DUAL_ENDSTOPS)
 149 
   #if ENABLED(Z_DUAL_ENDSTOPS)

+ 0
- 4
Marlin/configurator/config/Configuration_adv.h Näytä tiedosto

144 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
 144 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
145 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 145 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
146
146
147 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
148 
-  #define Z2_DIR_PIN E2_DIR_PIN
149 
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
150 
-
151 
   // #define Z_DUAL_ENDSTOPS
 147 
   // #define Z_DUAL_ENDSTOPS
152
148
153 
   #if ENABLED(Z_DUAL_ENDSTOPS)
 149 
   #if ENABLED(Z_DUAL_ENDSTOPS)

+ 0
- 4
Marlin/example_configurations/Felix/Configuration_adv.h Näytä tiedosto

152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
 152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
154
154
155 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
156 
-  #define Z2_DIR_PIN E2_DIR_PIN
157 
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
158 
-
159 
   // #define Z_DUAL_ENDSTOPS
 155 
   // #define Z_DUAL_ENDSTOPS
160
156
161 
   #if ENABLED(Z_DUAL_ENDSTOPS)
 157 
   #if ENABLED(Z_DUAL_ENDSTOPS)

+ 0
- 4
Marlin/example_configurations/Hephestos/Configuration_adv.h Näytä tiedosto

152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
 152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
154
154
155 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
156 
-  #define Z2_DIR_PIN E2_DIR_PIN
157 
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
158 
-
159 
   // #define Z_DUAL_ENDSTOPS
 155 
   // #define Z_DUAL_ENDSTOPS
160
156
161 
   #if ENABLED(Z_DUAL_ENDSTOPS)
 157 
   #if ENABLED(Z_DUAL_ENDSTOPS)

+ 0
- 4
Marlin/example_configurations/K8200/Configuration_adv.h Näytä tiedosto

152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
 152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
154
154
155 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
156 
-  #define Z2_DIR_PIN E2_DIR_PIN
157 
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
158 
-
159 
   // #define Z_DUAL_ENDSTOPS
 155 
   // #define Z_DUAL_ENDSTOPS
160
156
161 
   #if ENABLED(Z_DUAL_ENDSTOPS)
 157 
   #if ENABLED(Z_DUAL_ENDSTOPS)

+ 0
- 4
Marlin/example_configurations/RigidBot/Configuration_adv.h Näytä tiedosto

144 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
 144 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
145 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 145 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
146
146
147 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
148 
-  #define Z2_DIR_PIN E2_DIR_PIN
149 
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
150 
-
151 
   // #define Z_DUAL_ENDSTOPS
 147 
   // #define Z_DUAL_ENDSTOPS
152
148
153 
   #if ENABLED(Z_DUAL_ENDSTOPS)
 149 
   #if ENABLED(Z_DUAL_ENDSTOPS)

+ 0
- 4
Marlin/example_configurations/SCARA/Configuration_adv.h Näytä tiedosto

152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
 152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
154
154
155 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
156 
-  #define Z2_DIR_PIN E2_DIR_PIN
157 
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
158 
-
159 
   // #define Z_DUAL_ENDSTOPS
 155 
   // #define Z_DUAL_ENDSTOPS
160
156
161 
   #if ENABLED(Z_DUAL_ENDSTOPS)
 157 
   #if ENABLED(Z_DUAL_ENDSTOPS)

+ 0
- 4
Marlin/example_configurations/TAZ4/Configuration_adv.h Näytä tiedosto

152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
 152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
154
154
155 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
156 
-  #define Z2_DIR_PIN E2_DIR_PIN
157 
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
158 
-
159 
   // #define Z_DUAL_ENDSTOPS
 155 
   // #define Z_DUAL_ENDSTOPS
160
156
161 
   #if ENABLED(Z_DUAL_ENDSTOPS)
 157 
   #if ENABLED(Z_DUAL_ENDSTOPS)

+ 0
- 4
Marlin/example_configurations/WITBOX/Configuration_adv.h Näytä tiedosto

152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
 152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
154
154
155 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
156 
-  #define Z2_DIR_PIN E2_DIR_PIN
157 
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
158 
-
159 
   // #define Z_DUAL_ENDSTOPS
 155 
   // #define Z_DUAL_ENDSTOPS
160
156
161 
   #if ENABLED(Z_DUAL_ENDSTOPS)
 157 
   #if ENABLED(Z_DUAL_ENDSTOPS)

+ 0
- 4
Marlin/example_configurations/delta/biv2.5/Configuration_adv.h Näytä tiedosto

152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
 152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
154
154
155 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
156 
-  #define Z2_DIR_PIN E2_DIR_PIN
157 
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
158 
-
159 
   // #define Z_DUAL_ENDSTOPS
 155 
   // #define Z_DUAL_ENDSTOPS
160
156
161 
   #if ENABLED(Z_DUAL_ENDSTOPS)
 157 
   #if ENABLED(Z_DUAL_ENDSTOPS)

+ 0
- 4
Marlin/example_configurations/delta/generic/Configuration_adv.h Näytä tiedosto

152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
 152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
154
154
155 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
156 
-  #define Z2_DIR_PIN E2_DIR_PIN
157 
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
158 
-
159 
   // #define Z_DUAL_ENDSTOPS
 155 
   // #define Z_DUAL_ENDSTOPS
160
156
161 
   #if ENABLED(Z_DUAL_ENDSTOPS)
 157 
   #if ENABLED(Z_DUAL_ENDSTOPS)

+ 0
- 4
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h Näytä tiedosto

152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
 152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
154
154
155 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
156 
-  #define Z2_DIR_PIN E2_DIR_PIN
157 
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
158 
-
159 
   // #define Z_DUAL_ENDSTOPS
 155 
   // #define Z_DUAL_ENDSTOPS
160
156
161 
   #if ENABLED(Z_DUAL_ENDSTOPS)
 157 
   #if ENABLED(Z_DUAL_ENDSTOPS)

+ 0
- 4
Marlin/example_configurations/makibox/Configuration_adv.h Näytä tiedosto

152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
 152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
154
154
155 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
156 
-  #define Z2_DIR_PIN E2_DIR_PIN
157 
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
158 
-
159 
   // #define Z_DUAL_ENDSTOPS
 155 
   // #define Z_DUAL_ENDSTOPS
160
156
161 
   #if ENABLED(Z_DUAL_ENDSTOPS)
 157 
   #if ENABLED(Z_DUAL_ENDSTOPS)

+ 0
- 4
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h Näytä tiedosto

152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
 152 
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 153 
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
154
154
155 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
156 
-  #define Z2_DIR_PIN E2_DIR_PIN
157 
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
158 
-
159 
   // #define Z_DUAL_ENDSTOPS
 155 
   // #define Z_DUAL_ENDSTOPS
160
156
161 
   #if ENABLED(Z_DUAL_ENDSTOPS)
 157 
   #if ENABLED(Z_DUAL_ENDSTOPS)

Write Preview
Loading…
Peruuta
Tallenna