thomas
/
marlin
關注 1
收藏 0
複製 0
程式碼 問題 0 合併請求 0 版本發佈 0 Wiki 活動
瀏覽代碼

Fix some config spacing

Scott Lahteine 6 年之前
父節點
d4be970c8b
當前提交
1204f2fca8
共有 9 個檔案被更改，包括 37 行新增 和 37 行删除
分割檢視 顯示文件統計
  1. 5
    5
      config/examples/delta/Anycubic/Kossel/Configuration.h
  2. 4
    4
      config/examples/delta/Geeetech/Rostock 301/Configuration.h
  3. 4
    4
      config/examples/delta/Hatchbox_Alpha/Configuration.h
  4. 4
    4
      config/examples/delta/MKS/SBASE/Configuration.h
  5. 4
    4
      config/examples/delta/Tevo Little Monster/Configuration.h
  6. 4
    4
      config/examples/delta/generic/Configuration.h
  7. 4
    4
      config/examples/delta/kossel_mini/Configuration.h
  8. 4
    4
      config/examples/delta/kossel_pro/Configuration.h
  9. 4
    4
      config/examples/delta/kossel_xl/Configuration.h

+ 5
- 5
config/examples/delta/Anycubic/Kossel/Configuration.h 查看文件 

@@ -662,7 +662,7 @@
662 662
663 663 
   #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU)
664 664 
     // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
665 
-    #define DELTA_CALIBRATION_RADIUS DELTA_PRINTABLE_RADIUS - MIN_PROBE_EDGE  // (mm)
665 
+    #define DELTA_CALIBRATION_RADIUS DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)  // (mm)
666 666 
     // Set the steprate for papertest probing
667 667 
     #define PROBE_MANUALLY_STEP 0.05      // (mm)
668 668 
   #endif
 
@@ -1382,10 +1382,10 @@
1382 1382 
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
1383 1383
1384 1384 
   // Set the boundaries for probing (where the probe can reach).
1385 
-  #define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE))
1386 
-  #define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)
1387 
-  #define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE))
1388 
-  #define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)
1385 
+  #define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
1386 
+  #define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)
1387 
+  #define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
1388 
+  #define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)
1389 1389
1390 1390 
   // Probe along the Y axis, advancing X after each column
1391 1391 
   //#define PROBE_Y_FIRST

+ 4
- 4
config/examples/delta/Geeetech/Rostock 301/Configuration.h 查看文件 

@@ -1309,10 +1309,10 @@
1309 1309 
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
1310 1310
1311 1311 
   // Set the boundaries for probing (where the probe can reach).
1312 
-  //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE))
1313 
-  //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)
1314 
-  //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE))
1315 
-  //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)
1312 
+  //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
1313 
+  //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)
1314 
+  //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
1315 
+  //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)
1316 1316
1317 1317 
   // Probe along the Y axis, advancing X after each column
1318 1318 
   //#define PROBE_Y_FIRST

+ 4
- 4
config/examples/delta/Hatchbox_Alpha/Configuration.h 查看文件 

@@ -1324,10 +1324,10 @@
1324 1324 
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
1325 1325
1326 1326 
   // Set the boundaries for probing (where the probe can reach).
1327 
-  //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE))
1328 
-  //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)
1329 
-  //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE))
1330 
-  //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)
1327 
+  //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
1328 
+  //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)
1329 
+  //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
1330 
+  //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)
1331 1331
1332 1332 
   // Probe along the Y axis, advancing X after each column
1333 1333 
   //#define PROBE_Y_FIRST

+ 4
- 4
config/examples/delta/MKS/SBASE/Configuration.h 查看文件 

@@ -1309,10 +1309,10 @@
1309 1309 
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
1310 1310
1311 1311 
   // Set the boundaries for probing (where the probe can reach).
1312 
-  //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE))
1313 
-  //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)
1314 
-  //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE))
1315 
-  //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)
1312 
+  //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
1313 
+  //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)
1314 
+  //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
1315 
+  //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)
1316 1316
1317 1317 
   // Probe along the Y axis, advancing X after each column
1318 1318 
   //#define PROBE_Y_FIRST

+ 4
- 4
config/examples/delta/Tevo Little Monster/Configuration.h 查看文件 

@@ -1313,10 +1313,10 @@
1313 1313 
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
1314 1314
1315 1315 
   // Set the boundaries for probing (where the probe can reach).
1316 
-  //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE))
1317 
-  //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)
1318 
-  //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE))
1319 
-  //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)
1316 
+  //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
1317 
+  //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)
1318 
+  //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
1319 
+  //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)
1320 1320
1321 1321 
   // Probe along the Y axis, advancing X after each column
1322 1322 
   //#define PROBE_Y_FIRST

+ 4
- 4
config/examples/delta/generic/Configuration.h 查看文件 

@@ -1309,10 +1309,10 @@
1309 1309 
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
1310 1310
1311 1311 
   // Set the boundaries for probing (where the probe can reach).
1312 
-  //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE))
1313 
-  //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)
1314 
-  //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE))
1315 
-  //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)
1312 
+  //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
1313 
+  //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)
1314 
+  //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
1315 
+  //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)
1316 1316
1317 1317 
   // Probe along the Y axis, advancing X after each column
1318 1318 
   //#define PROBE_Y_FIRST

+ 4
- 4
config/examples/delta/kossel_mini/Configuration.h 查看文件 

@@ -1311,10 +1311,10 @@
1311 1311 
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
1312 1312
1313 1313 
   // Set the boundaries for probing (where the probe can reach).
1314 
-  //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE))
1315 
-  //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)
1316 
-  //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE))
1317 
-  //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)
1314 
+  //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
1315 
+  //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)
1316 
+  //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
1317 
+  //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)
1318 1318
1319 1319 
   // Probe along the Y axis, advancing X after each column
1320 1320 
   //#define PROBE_Y_FIRST

+ 4
- 4
config/examples/delta/kossel_pro/Configuration.h 查看文件 

@@ -1312,10 +1312,10 @@
1312 1312 
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
1313 1313
1314 1314 
   // Set the boundaries for probing (where the probe can reach).
1315 
-  //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE))
1316 
-  //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)
1317 
-  //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE))
1318 
-  //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)
1315 
+  //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
1316 
+  //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)
1317 
+  //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
1318 
+  //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)
1319 1319
1320 1320 
   // Probe along the Y axis, advancing X after each column
1321 1321 
   //#define PROBE_Y_FIRST

+ 4
- 4
config/examples/delta/kossel_xl/Configuration.h 查看文件 

@@ -1312,10 +1312,10 @@
1312 1312 
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
1313 1313
1314 1314 
   // Set the boundaries for probing (where the probe can reach).
1315 
-  //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE))
1316 
-  //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)
1317 
-  //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE))
1318 
-  //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)
1315 
+  //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
1316 
+  //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)
1317 
+  //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
1318 
+  //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)
1319 1319
1320 1320 
   // Probe along the Y axis, advancing X after each column
1321 1321 
   //#define PROBE_Y_FIRST

Write Preview
Loading…
取消
儲存