Add STARTUP_SCRIPT option. M17 parity with M18. (#14953)

Marlin/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

Marlin/src/Marlin.cpp

   enable_E5();
 }
 
+void enable_e_steppers() {
+  enable_E0();
+  enable_E1();
+  enable_E2();
+  enable_E3();
+  enable_E4();
+  enable_E5();
+}
+
 void disable_e_steppers() {
   disable_E0();
   disable_E1();
     init_closedloop();
   #endif
 
+  #ifdef STARTUP_COMMANDS
+    queue.inject_P(PSTR(STARTUP_COMMANDS));
+  #endif
+
   #if ENABLED(INIT_SDCARD_ON_BOOT) && !HAS_SPI_LCD
     card.beginautostart();
   #endif

Marlin/src/Marlin.h

 /**
  * The axis order in all axis related arrays is X, Y, Z, E
  */
+void enable_e_steppers();
 void enable_all_steppers();
 void disable_e_stepper(const uint8_t e);
 void disable_e_steppers();

Marlin/src/core/drivers.h

 
 #define AXIS_DRIVER_TYPE(A,T) AXIS_DRIVER_TYPE_##A(T)
 
+#define HAS_E_DRIVER(T) (  AXIS_DRIVER_TYPE_E0(T) || AXIS_DRIVER_TYPE_E1(T) \
+                        || AXIS_DRIVER_TYPE_E2(T) || AXIS_DRIVER_TYPE_E3(T) \
+                        || AXIS_DRIVER_TYPE_E4(T) || AXIS_DRIVER_TYPE_E5(T) )
+
 #define HAS_DRIVER(T) (    AXIS_DRIVER_TYPE_X(T)  || AXIS_DRIVER_TYPE_X2(T) \
                         || AXIS_DRIVER_TYPE_Y(T)  || AXIS_DRIVER_TYPE_Y2(T) \
                         || AXIS_DRIVER_TYPE_Z(T)  || AXIS_DRIVER_TYPE_Z2(T) || AXIS_DRIVER_TYPE_Z3(T) \
-                        || AXIS_DRIVER_TYPE_E0(T) || AXIS_DRIVER_TYPE_E1(T) \
-                        || AXIS_DRIVER_TYPE_E2(T) || AXIS_DRIVER_TYPE_E3(T) \
-                        || AXIS_DRIVER_TYPE_E4(T) || AXIS_DRIVER_TYPE_E5(T) )
+                        || HAS_E_DRIVER(T) )
 
 // Test for supported TMC drivers that require advanced configuration
 // Does not match standalone configurations

Marlin/src/feature/pause.cpp

     planner.settings.retract_acceleration = saved_acceleration;
   #endif
 
-  // Disable extruders steppers for manual filament changing (only on boards that have separate ENABLE_PINS)
-  #if (E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN) || AXIS_DRIVER_TYPE_E0(TMC2660) || AXIS_DRIVER_TYPE_E1(TMC2660) || AXIS_DRIVER_TYPE_E2(TMC2660) || AXIS_DRIVER_TYPE_E3(TMC2660) || AXIS_DRIVER_TYPE_E4(TMC2660) || AXIS_DRIVER_TYPE_E5(TMC2660)
+  // Disable E steppers for manual change
+  #if HAS_E_STEPPER_ENABLE
     disable_e_stepper(active_extruder);
     safe_delay(100);
   #endif

Marlin/src/gcode/control/M17_M18_M84.cpp

 #endif
 
 /**
- * M17: Enable power on all stepper motors
+ * M17: Enable stepper motors
  */
 void GcodeSuite::M17() {
-  LCD_MESSAGEPGM(MSG_NO_MOVE);
-  enable_all_steppers();
+  if (parser.seen("XYZE")) {
+    if (parser.seen('X')) enable_X();
+    if (parser.seen('Y')) enable_Y();
+    if (parser.seen('Z')) enable_Z();
+    #if HAS_E_STEPPER_ENABLE
+      if (parser.seen('E')) enable_e_steppers();
+    #endif
+  }
+  else {
+    LCD_MESSAGEPGM(MSG_NO_MOVE);
+    enable_all_steppers();
+  }
 }
 
 /**
     stepper_inactive_time = parser.value_millis_from_seconds();
   }
   else {
-    bool all_axis = !(parser.seen('X') || parser.seen('Y') || parser.seen('Z') || parser.seen('E'));
-    if (all_axis) {
-      planner.finish_and_disable();
-    }
-    else {
+    if (parser.seen("XYZE")) {
       planner.synchronize();
       if (parser.seen('X')) disable_X();
       if (parser.seen('Y')) disable_Y();
       if (parser.seen('Z')) disable_Z();
-      // Only disable on boards that have separate ENABLE_PINS or another method for disabling the driver
-      #if (E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN) || AXIS_DRIVER_TYPE_E0(TMC2660) || AXIS_DRIVER_TYPE_E1(TMC2660) || AXIS_DRIVER_TYPE_E2(TMC2660) || AXIS_DRIVER_TYPE_E3(TMC2660) || AXIS_DRIVER_TYPE_E4(TMC2660) || AXIS_DRIVER_TYPE_E5(TMC2660)
+      #if HAS_E_STEPPER_ENABLE
         if (parser.seen('E')) disable_e_steppers();
       #endif
     }
+    else
+      planner.finish_and_disable();
 
     #if HAS_LCD_MENU && ENABLED(AUTO_BED_LEVELING_UBL)
       if (ubl.lcd_map_control) {

Marlin/src/inc/Conditionals_post.h

   #endif
 #endif
 
+#define HAS_E_STEPPER_ENABLE (HAS_E_DRIVER(TMC2660) \
+  || ( E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != X_ENABLE_PIN   \
+    && E0_ENABLE_PIN != Y_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN ) \
+)
+
 // Endstops and bed probe
 #define _HAS_STOP(A,M) (PIN_EXISTS(A##_##M) && !IS_X2_ENDSTOP(A,M) && !IS_Y2_ENDSTOP(A,M) && !IS_Z2_OR_PROBE(A,M))
 #define HAS_X_MIN _HAS_STOP(X,MIN)

Marlin/src/libs/L6470/L6470_Marlin.h

 #define L6470_ERROR_MASK  (STATUS_UVLO | STATUS_TH_WRN | STATUS_TH_SD  | STATUS_OCD | STATUS_STEP_LOSS_A | STATUS_STEP_LOSS_B)
 #define dSPIN_STEP_CLOCK_FWD dSPIN_STEP_CLOCK
 #define dSPIN_STEP_CLOCK_REV dSPIN_STEP_CLOCK+1
-#define HAS_L6470_EXTRUDER ( AXIS_DRIVER_TYPE_E0(L6470) || AXIS_DRIVER_TYPE_E1(L6470) || AXIS_DRIVER_TYPE_E2(L6470) \
-                          || AXIS_DRIVER_TYPE_E3(L6470) || AXIS_DRIVER_TYPE_E4(L6470) || AXIS_DRIVER_TYPE_E5(L6470) )
 
 class L6470_Marlin {
 public:

config/default/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/AlephObjects/TAZ4/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Alfawise/U20/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/AliExpress/UM2pExt/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Anet/A2/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Anet/A2plus/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Anet/A6/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Anet/A8/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Anet/A8plus/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Anet/E16/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/AnyCubic/i3/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/ArmEd/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/BIBO/TouchX/default/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/BQ/Hephestos/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/BQ/Hephestos_2/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/BQ/WITBOX/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Cartesio/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Creality/CR-10/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Creality/CR-10S/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Creality/CR-10_5S/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Creality/CR-10mini/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Creality/CR-20 Pro/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Creality/CR-20/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Creality/CR-8/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Creality/Ender-2/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Creality/Ender-3/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Creality/Ender-4/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Creality/Ender-5/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Dagoma/Disco Ultimate/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Einstart-S/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/FYSETC/AIO_II/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/FYSETC/Cheetah/base/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/FYSETC/F6_13/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Felix/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/FlashForge/CreatorPro/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/FolgerTech/i3-2020/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Formbot/Raptor/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Formbot/T_Rex_2+/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Formbot/T_Rex_3/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Geeetech/A10/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Geeetech/A10M/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Geeetech/A20M/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Geeetech/MeCreator2/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Infitary/i3-M508/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/JGAurora/A1/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/JGAurora/A5/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/JGAurora/A5S/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Malyan/M150/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Malyan/M200/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Micromake/C1/enhanced/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Mks/Robin/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Mks/Sbase/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/RapideLite/RL200/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/RigidBot/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/SCARA/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Sanguinololu/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Tevo/Michelangelo/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Tevo/Tarantula Pro/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/TheBorg/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/TinyBoy2/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Tronxy/X3A/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Tronxy/X5S-2E/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/UltiMachine/Archim1/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/UltiMachine/Archim2/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/VORONDesign/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Velleman/K8200/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Velleman/K8400/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/WASP/PowerWASP/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Wanhao/Duplicator 6/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/delta/Anycubic/Kossel/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/delta/Dreammaker/Overlord/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/delta/FLSUN/kossel/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/delta/MKS/SBASE/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/delta/Tevo Little Monster/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.

config/examples/delta/generic/Configuration_adv.h

 #endif
 
 /**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
  * G-code Macros
  *
  * Add G-codes M810-M819 to define and run G-code macros.