Clean up language files

Marlin/src/lcd/language/language_ca.h

   PROGMEM Language_Str MSG_SET_ORIGIN                      = _UxGT("Estableix origen");
   PROGMEM Language_Str MSG_PREHEAT_1                       = _UxGT("Preescalfa ") PREHEAT_1_LABEL;
   PROGMEM Language_Str MSG_PREHEAT_1_H                     = _UxGT("Preescalfa ") PREHEAT_1_LABEL " ~";
-  PROGMEM Language_Str MSG_PREHEAT_1_END                   = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" End");
-  PROGMEM Language_Str MSG_PREHEAT_1_END_E                 = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" End ~");
-  PROGMEM Language_Str MSG_PREHEAT_1_ALL                   = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" Tot");
-  PROGMEM Language_Str MSG_PREHEAT_1_BEDONLY               = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" Llit");
-  PROGMEM Language_Str MSG_PREHEAT_1_SETTINGS              = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" Conf.");
+  PROGMEM Language_Str MSG_PREHEAT_1_END                   = _UxGT("Preescalfa ") PREHEAT_1_LABEL _UxGT(" End");
+  PROGMEM Language_Str MSG_PREHEAT_1_END_E                 = _UxGT("Preescalfa ") PREHEAT_1_LABEL _UxGT(" End ~");
+  PROGMEM Language_Str MSG_PREHEAT_1_ALL                   = _UxGT("Preescalfa ") PREHEAT_1_LABEL _UxGT(" Tot");
+  PROGMEM Language_Str MSG_PREHEAT_1_BEDONLY               = _UxGT("Preescalfa ") PREHEAT_1_LABEL _UxGT(" Llit");
+  PROGMEM Language_Str MSG_PREHEAT_1_SETTINGS              = _UxGT("Preescalfa ") PREHEAT_1_LABEL _UxGT(" Conf.");
   PROGMEM Language_Str MSG_PREHEAT_2                       = _UxGT("Preescalfa ") PREHEAT_2_LABEL;
   PROGMEM Language_Str MSG_PREHEAT_2_H                     = _UxGT("Preescalfa ") PREHEAT_2_LABEL " ~";
-  PROGMEM Language_Str MSG_PREHEAT_2_END                   = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" End");
-  PROGMEM Language_Str MSG_PREHEAT_2_END_E                 = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" End ~");
-  PROGMEM Language_Str MSG_PREHEAT_2_ALL                   = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" Tot");
-  PROGMEM Language_Str MSG_PREHEAT_2_BEDONLY               = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" Llit");
-  PROGMEM Language_Str MSG_PREHEAT_2_SETTINGS              = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" Conf.");
+  PROGMEM Language_Str MSG_PREHEAT_2_END                   = _UxGT("Preescalfa ") PREHEAT_2_LABEL _UxGT(" End");
+  PROGMEM Language_Str MSG_PREHEAT_2_END_E                 = _UxGT("Preescalfa ") PREHEAT_2_LABEL _UxGT(" End ~");
+  PROGMEM Language_Str MSG_PREHEAT_2_ALL                   = _UxGT("Preescalfa ") PREHEAT_2_LABEL _UxGT(" Tot");
+  PROGMEM Language_Str MSG_PREHEAT_2_BEDONLY               = _UxGT("Preescalfa ") PREHEAT_2_LABEL _UxGT(" Llit");
+  PROGMEM Language_Str MSG_PREHEAT_2_SETTINGS              = _UxGT("Preescalfa ") PREHEAT_2_LABEL _UxGT(" Conf.");
   PROGMEM Language_Str MSG_COOLDOWN                        = _UxGT("Refreda");
-  PROGMEM Language_Str MSG_SWITCH_PS_ON                    = _UxGT("Switch power on");
-  PROGMEM Language_Str MSG_SWITCH_PS_OFF                   = _UxGT("Switch power off");
+
   PROGMEM Language_Str MSG_EXTRUDE                         = _UxGT("Extrudeix");
   PROGMEM Language_Str MSG_RETRACT                         = _UxGT("Retreu");
   PROGMEM Language_Str MSG_MOVE_AXIS                       = _UxGT("Mou eixos");
   PROGMEM Language_Str MSG_FLOW                            = _UxGT("Flux");
   PROGMEM Language_Str MSG_FLOW_N                          = _UxGT("Flux ~");
   PROGMEM Language_Str MSG_VTRAV_MIN                       = _UxGT("VViatge min");
-  PROGMEM Language_Str MSG_AMAX_A                          = _UxGT("Accel. max ") LCD_STR_A;
-  PROGMEM Language_Str MSG_AMAX_B                          = _UxGT("Accel. max ") LCD_STR_B;
-  PROGMEM Language_Str MSG_AMAX_C                          = _UxGT("Accel. max ") LCD_STR_C;
-  PROGMEM Language_Str MSG_AMAX_E                          = _UxGT("Accel. max ") LCD_STR_E;
-  PROGMEM Language_Str MSG_AMAX_EN                         = _UxGT("Accel. max *");
+
   PROGMEM Language_Str MSG_A_RETRACT                       = _UxGT("Accel. retracc");
   PROGMEM Language_Str MSG_A_TRAVEL                        = _UxGT("Accel. Viatge");
   PROGMEM Language_Str MSG_STEPS_PER_MM                    = _UxGT("Passos/mm");
   PROGMEM Language_Str MSG_INFO_PSU                        = _UxGT("Font alimentacio");
 
   PROGMEM Language_Str MSG_DRIVE_STRENGTH                  = _UxGT("Força motor");
-  PROGMEM Language_Str MSG_DAC_PERCENT_X                   = _UxGT("X Driver %");
-  PROGMEM Language_Str MSG_DAC_PERCENT_Y                   = _UxGT("Y Driver %");
-  PROGMEM Language_Str MSG_DAC_PERCENT_Z                   = _UxGT("Z Driver %");
-  PROGMEM Language_Str MSG_DAC_PERCENT_E                   = _UxGT("E Driver %");
-  PROGMEM Language_Str MSG_DAC_EEPROM_WRITE                = _UxGT("DAC EEPROM Write");
+
   PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME   = _UxGT("Repren impressió");
 
   PROGMEM Language_Str MSG_KILL_EXPECTED_PRINTER           = _UxGT("Impressora incorrecta");

Marlin/src/lcd/language/language_nl.h

   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Hoofdmenu");
   PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Autostart");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Motoren uit");
-  PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Debug Menu"); //accepted English terms
+  PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Debug Menu"); // accepted English terms
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("Vooruitgang Test");
-  PROGMEM Language_Str MSG_AUTO_HOME                       = _UxGT("Auto home");
-  PROGMEM Language_Str MSG_AUTO_HOME_X                     = _UxGT("Home X");
-  PROGMEM Language_Str MSG_AUTO_HOME_Y                     = _UxGT("Home Y");
-  PROGMEM Language_Str MSG_AUTO_HOME_Z                     = _UxGT("Home Z");
-  PROGMEM Language_Str MSG_LEVEL_BED_HOMING                = _UxGT("Homing XYZ");
+
   PROGMEM Language_Str MSG_LEVEL_BED_WAITING               = _UxGT("Klik voor begin");
   PROGMEM Language_Str MSG_LEVEL_BED_NEXT_POINT            = _UxGT("Volgende Plaats");
   PROGMEM Language_Str MSG_LEVEL_BED_DONE                  = _UxGT("Bed level kompl.");
   PROGMEM Language_Str MSG_TEMPERATURE                     = _UxGT("Temperatuur");
   PROGMEM Language_Str MSG_MOTION                          = _UxGT("Beweging");
   PROGMEM Language_Str MSG_FILAMENT                        = _UxGT("Filament");
-  PROGMEM Language_Str MSG_ADVANCE_K                       = _UxGT("Advance K");        //accepted english dutch
-  PROGMEM Language_Str MSG_ADVANCE_K_E                     = _UxGT("Advance K *"); //accepted english dutch
+  PROGMEM Language_Str MSG_ADVANCE_K                       = _UxGT("Advance K");        // accepted english dutch
+  PROGMEM Language_Str MSG_ADVANCE_K_E                     = _UxGT("Advance K *"); // accepted english dutch
   PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED              = _UxGT("E in mm³");
   PROGMEM Language_Str MSG_FILAMENT_DIAM                   = _UxGT("Fil. Dia.");
   PROGMEM Language_Str MSG_FILAMENT_DIAM_E                 = _UxGT("Fil. Dia. *");
   PROGMEM Language_Str MSG_NO_MOVE                         = _UxGT("Geen beweging.");
   PROGMEM Language_Str MSG_KILLED                          = _UxGT("Afgebroken. ");
   PROGMEM Language_Str MSG_STOPPED                         = _UxGT("Gestopt. ");
-  PROGMEM Language_Str MSG_CONTROL_RETRACT                 = _UxGT("Retract mm");  //accepted English term in Dutch
+  PROGMEM Language_Str MSG_CONTROL_RETRACT                 = _UxGT("Retract mm");  // accepted English term in Dutch
   PROGMEM Language_Str MSG_CONTROL_RETRACT_SWAP            = _UxGT("Ruil Retract mm");
   PROGMEM Language_Str MSG_CONTROL_RETRACTF                = _UxGT("Retract  F");
   PROGMEM Language_Str MSG_CONTROL_RETRACT_ZHOP            = _UxGT("Hop mm");
   PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("BLTouch Zelf-Test");
   PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Reset BLTouch");
   PROGMEM Language_Str MSG_HOME_FIRST                      = _UxGT("Home %s%s%s Eerst");
-  PROGMEM Language_Str MSG_ZPROBE_ZOFFSET                  = _UxGT("Z Offset");  //accepted English term in Dutch
+  PROGMEM Language_Str MSG_ZPROBE_ZOFFSET                  = _UxGT("Z Offset");  // accepted English term in Dutch
   PROGMEM Language_Str MSG_BABYSTEP_X                      = _UxGT("Babystap X");
   PROGMEM Language_Str MSG_BABYSTEP_Y                      = _UxGT("Babystap Y");
   PROGMEM Language_Str MSG_BABYSTEP_Z                      = _UxGT("Babystap Z");
   PROGMEM Language_Str MSG_DELTA_AUTO_CALIBRATE            = _UxGT("Auto Calibratie");
   PROGMEM Language_Str MSG_DELTA_HEIGHT_CALIBRATE          = _UxGT("Zet Delta Hoogte");
 
-  PROGMEM Language_Str MSG_INFO_STATS_MENU                 = _UxGT("Printer Stats");
-  PROGMEM Language_Str MSG_INFO_BOARD_MENU                 = _UxGT("Board Info"); //accepted English term in Dutch
-  PROGMEM Language_Str MSG_INFO_THERMISTOR_MENU            = _UxGT("Thermistors");
-  PROGMEM Language_Str MSG_INFO_EXTRUDERS                  = _UxGT("Extruders");
-  PROGMEM Language_Str MSG_INFO_BAUDRATE                   = _UxGT("Baud");
-  PROGMEM Language_Str MSG_INFO_MENU                       = _UxGT("Over Printer");
-  PROGMEM Language_Str MSG_INFO_PRINTER_MENU               = _UxGT("Printer Info");
-  PROGMEM Language_Str MSG_INFO_PROTOCOL                   = _UxGT("Protocol");
   PROGMEM Language_Str MSG_CASE_LIGHT                      = _UxGT("Case licht");
 
   PROGMEM Language_Str MSG_KILL_EXPECTED_PRINTER           = _UxGT("Onjuiste printer");
 
   PROGMEM Language_Str MSG_INFO_MIN_TEMP                   = _UxGT("Min Temp");
   PROGMEM Language_Str MSG_INFO_MAX_TEMP                   = _UxGT("Max Temp");
-  PROGMEM Language_Str MSG_INFO_PSU                        = _UxGT("PSU");  //accepted English term in Dutch
+  PROGMEM Language_Str MSG_INFO_PSU                        = _UxGT("PSU");  // accepted English term in Dutch
 
   PROGMEM Language_Str MSG_DRIVE_STRENGTH                  = _UxGT("Motorstroom");
-  PROGMEM Language_Str MSG_DAC_PERCENT_X                   = _UxGT("X Driver %");  //accepted English term in Dutch
-  PROGMEM Language_Str MSG_DAC_PERCENT_Y                   = _UxGT("Y Driver %");  //accepted English term in Dutch
-  PROGMEM Language_Str MSG_DAC_PERCENT_Z                   = _UxGT("Z Driver %");  //accepted English term in Dutch
-  PROGMEM Language_Str MSG_DAC_PERCENT_E                   = _UxGT("E Driver %");  //accepted English term in Dutch
+
   PROGMEM Language_Str MSG_DAC_EEPROM_WRITE                = _UxGT("DAC Opslaan");
   PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME   = _UxGT("Hervat print");
-  PROGMEM Language_Str MSG_FILAMENT_CHANGE_NOZZLE          = _UxGT(" Nozzle: "); //accepeted English term
+  PROGMEM Language_Str MSG_FILAMENT_CHANGE_NOZZLE          = _UxGT(" Nozzle: "); // accepted English term
   //
   // Filament Change screens show up to 3 lines on a 4-line display
   //                        ...or up to 2 lines on a 3-line display

Marlin/src/lcd/language/language_pl.h

   PROGMEM Language_Str MSG_CYCLE_MIX                       = _UxGT("Cycle Mix");
   PROGMEM Language_Str MSG_GRADIENT_MIX                    = _UxGT("Gradient Mix");
   PROGMEM Language_Str MSG_REVERSE_GRADIENT                = _UxGT("Odwrotny gradient");
-  PROGMEM Language_Str MSG_ACTIVE_VTOOL                    = _UxGT("Active V-tool");
-  PROGMEM Language_Str MSG_START_VTOOL                     = _UxGT("Start V-tool");
-  PROGMEM Language_Str MSG_END_VTOOL                       = _UxGT("  End V-tool");
-  PROGMEM Language_Str MSG_GRADIENT_ALIAS                  = _UxGT("Alias V-tool");
-  PROGMEM Language_Str MSG_RESET_VTOOLS                    = _UxGT("Reset V-tools");
-  PROGMEM Language_Str MSG_COMMIT_VTOOL                    = _UxGT("Commit V-tool Mix");
-  PROGMEM Language_Str MSG_VTOOLS_RESET                    = _UxGT("V-tools Were Reset");
-  PROGMEM Language_Str MSG_START_Z                         = _UxGT("Start Z:");
-  PROGMEM Language_Str MSG_END_Z                           = _UxGT("  End Z:");
-
-  PROGMEM Language_Str MSG_GAMES                           = _UxGT("Games");
-  PROGMEM Language_Str MSG_BRICKOUT                        = _UxGT("Brickout");
-  PROGMEM Language_Str MSG_INVADERS                        = _UxGT("Invaders");
-  PROGMEM Language_Str MSG_SNAKE                           = _UxGT("Sn4k3");
-  PROGMEM Language_Str MSG_MAZE                            = _UxGT("Maze");
 
   //
   // Filament Change screens show up to 3 lines on a 4-line display
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE    = _UxGT(MSG_1_LINE("Kliknij by zakończyć"));
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME        = _UxGT(MSG_1_LINE("Wznawianie..."));
   #endif
-  PROGMEM Language_Str MSG_TMC_DRIVERS                     = _UxGT("TMC Drivers");
-  PROGMEM Language_Str MSG_TMC_CURRENT                     = _UxGT("Driver Current");
-  PROGMEM Language_Str MSG_TMC_HYBRID_THRS                 = _UxGT("Hybrid Threshold");
-  PROGMEM Language_Str MSG_TMC_HOMING_THRS                 = _UxGT("Sensorless Homing");
-  PROGMEM Language_Str MSG_TMC_STEPPING_MODE               = _UxGT("Stepping Mode");
-  PROGMEM Language_Str MSG_TMC_STEALTH_ENABLED             = _UxGT("StealthChop Enabled");
-  PROGMEM Language_Str MSG_SERVICE_RESET                   = _UxGT("Reset");
-  PROGMEM Language_Str MSG_SERVICE_IN                      = _UxGT(" in:");
-  PROGMEM Language_Str MSG_BACKLASH                        = _UxGT("Backlash");
-  PROGMEM Language_Str MSG_BACKLASH_A                      = LCD_STR_A;
-  PROGMEM Language_Str MSG_BACKLASH_B                      = LCD_STR_B;
-  PROGMEM Language_Str MSG_BACKLASH_C                      = LCD_STR_C;
-  PROGMEM Language_Str MSG_BACKLASH_CORRECTION             = _UxGT("Correction");
-  PROGMEM Language_Str MSG_BACKLASH_SMOOTHING              = _UxGT("Smoothing");
 }

Marlin/src/lcd/language/language_zh_TW.h

   PROGMEM Language_Str MSG_AUTOTEMP                        = _UxGT("自動控溫");     //"Autotemp"
   PROGMEM Language_Str MSG_LCD_ON                          = _UxGT("開 ");     //"On"
   PROGMEM Language_Str MSG_LCD_OFF                         = _UxGT("關 ");     //"Off"
-  PROGMEM Language_Str MSG_PID_AUTOTUNE                    = _UxGT("PID Autotune");
-  PROGMEM Language_Str MSG_PID_AUTOTUNE_E                  = _UxGT("PID Autotune *");
-  PROGMEM Language_Str MSG_PID_P                           = _UxGT("PID-P");     //"PID-P"
-  PROGMEM Language_Str MSG_PID_P_E                         = _UxGT("PID-P *");
-  PROGMEM Language_Str MSG_PID_I                           = _UxGT("PID-I");     //"PID-I"
-  PROGMEM Language_Str MSG_PID_I_E                         = _UxGT("PID-I *");
-  PROGMEM Language_Str MSG_PID_D                           = _UxGT("PID-D");     //"PID-D"
-  PROGMEM Language_Str MSG_PID_D_E                         = _UxGT("PID-D *");
-  PROGMEM Language_Str MSG_PID_C                           = _UxGT("PID-C");     //"PID-C"
-  PROGMEM Language_Str MSG_PID_C_E                         = _UxGT("PID-C *");
-  PROGMEM Language_Str MSG_PID_F                           = _UxGT("PID-F");    //"PID-F"
-  PROGMEM Language_Str MSG_PID_F_E                         = _UxGT("PID-F *");
+
   PROGMEM Language_Str MSG_SELECT                          = _UxGT("選擇");     //"Select"
   PROGMEM Language_Str MSG_SELECT_E                        = _UxGT("選擇 *");
   PROGMEM Language_Str MSG_ACC                             = _UxGT("加速度");     //"Accel" acceleration
   PROGMEM Language_Str MSG_VB_JERK                         = _UxGT("軸抖動速率") LCD_STR_B;     //"Vb-jerk"
   PROGMEM Language_Str MSG_VC_JERK                         = _UxGT("軸抖動速率") LCD_STR_C;     //"Vc-jerk"
   PROGMEM Language_Str MSG_VE_JERK                         = _UxGT("擠出機抖動速率");     //"Ve-jerk"
-  PROGMEM Language_Str MSG_JUNCTION_DEVIATION              = _UxGT("Junction Dev");
+
   PROGMEM Language_Str MSG_VELOCITY                        = _UxGT("速度");     // "Velocity"
   PROGMEM Language_Str MSG_VMAX_A                          = _UxGT("最大進料速率") LCD_STR_A;     //"Vmax " max_feedrate_mm_s
   PROGMEM Language_Str MSG_VMAX_B                          = _UxGT("最大進料速率") LCD_STR_B;
   PROGMEM Language_Str MSG_RELEASE_MEDIA                   = _UxGT("釋放媒體");   //"Release Media"
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Z探針在熱床之外");     //"Z probe out. bed" Z probe is not within the physical limits
   PROGMEM Language_Str MSG_SKEW_FACTOR                     = _UxGT("偏斜因數");     // "Skew Factor"
-  PROGMEM Language_Str MSG_BLTOUCH                         = _UxGT("BLTouch");     // "BLTouch"
+
   PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("BLTouch 自檢");     // "BLTouch Self-Test"
   PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("重置BLTouch");     // "Reset BLTouch"
   PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("裝載BLTouch");     // "Stow BLTouch"
   PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("部署BLTouch");     // "Deploy BLTouch"
-  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("Cmd: SW-Mode");
-  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("Cmd: 5V-Mode");
-  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("Cmd: OD-Mode");
-  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("Cmd: Mode-Store");
-  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V           = _UxGT("Set BLTouch to 5V");
-  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD           = _UxGT("Set BLTouch to OD");
-  PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO               = _UxGT("Report Drain");
-  PROGMEM Language_Str MSG_BLTOUCH_MODE_CHANGE             = _UxGT("DANGER: Bad settings can cause damage! Proceed anyway?");
-  PROGMEM Language_Str MSG_TOUCHMI_PROBE                   = _UxGT("TouchMI");
-  PROGMEM Language_Str MSG_TOUCHMI_INIT                    = _UxGT("Init TouchMI");
-  PROGMEM Language_Str MSG_TOUCHMI_ZTEST                   = _UxGT("Z Offset Test");
-  PROGMEM Language_Str MSG_TOUCHMI_SAVE                    = _UxGT("Save");
-  PROGMEM Language_Str MSG_MANUAL_DEPLOY_TOUCHMI           = _UxGT("Deploy TouchMI");
-  PROGMEM Language_Str MSG_MANUAL_DEPLOY                   = _UxGT("Deploy Z-Probe");
-  PROGMEM Language_Str MSG_MANUAL_STOW                     = _UxGT("Stow Z-Probe");
+
   PROGMEM Language_Str MSG_HOME_FIRST                      = _UxGT("歸位 %s%s%s 先");     //"Home ... first"
   PROGMEM Language_Str MSG_ZPROBE_OFFSETS                  = _UxGT("探針偏移");   //Probe Offsets
   PROGMEM Language_Str MSG_ZPROBE_XOFFSET                  = _UxGT("探針X偏移量");   //Probe X Offset
   PROGMEM Language_Str MSG_LCD_PROBING_FAILED              = _UxGT("探針探測失敗");     // "Probing failed"
   PROGMEM Language_Str MSG_M600_TOO_COLD                   = _UxGT("M600: 太冷");     // "M600: Too cold"
 
-  PROGMEM Language_Str MSG_MMU2_CHOOSE_FILAMENT_HEADER     = _UxGT("CHOOSE FILAMENT");
-  PROGMEM Language_Str MSG_MMU2_MENU                       = _UxGT("MMU");
-  PROGMEM Language_Str MSG_KILL_MMU2_FIRMWARE              = _UxGT("Update MMU Firmware!");
-  PROGMEM Language_Str MSG_MMU2_NOT_RESPONDING             = _UxGT("MMU Needs Attention.");
-  PROGMEM Language_Str MSG_MMU2_RESUME                     = _UxGT("Resume Print");
-  PROGMEM Language_Str MSG_MMU2_RESUMING                   = _UxGT("Resuming...");
-  PROGMEM Language_Str MSG_MMU2_LOAD_FILAMENT              = _UxGT("Load Filament");
-  PROGMEM Language_Str MSG_MMU2_LOAD_ALL                   = _UxGT("Load All");
-  PROGMEM Language_Str MSG_MMU2_LOAD_TO_NOZZLE             = _UxGT("Load to Nozzle");
-  PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT             = _UxGT("Eject Filament");
-  PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT_N           = _UxGT("Eject Filament ~");
-  PROGMEM Language_Str MSG_MMU2_UNLOAD_FILAMENT            = _UxGT("Unload Filament");
-  PROGMEM Language_Str MSG_MMU2_LOADING_FILAMENT           = _UxGT("Loading Fil. %i...");
-  PROGMEM Language_Str MSG_MMU2_EJECTING_FILAMENT          = _UxGT("Ejecting Fil. ...");
-  PROGMEM Language_Str MSG_MMU2_UNLOADING_FILAMENT         = _UxGT("Unloading Fil....");
-  PROGMEM Language_Str MSG_MMU2_ALL                        = _UxGT("All");
-  PROGMEM Language_Str MSG_MMU2_FILAMENT_N                 = _UxGT("Filament ~");
-  PROGMEM Language_Str MSG_MMU2_RESET                      = _UxGT("Reset MMU");
-  PROGMEM Language_Str MSG_MMU2_RESETTING                  = _UxGT("Resetting MMU...");
-  PROGMEM Language_Str MSG_MMU2_EJECT_RECOVER              = _UxGT("Remove, click");
-
-  PROGMEM Language_Str MSG_MIX                             = _UxGT("Mix");
-  PROGMEM Language_Str MSG_MIX_COMPONENT_N                 = _UxGT("Component =");
-  PROGMEM Language_Str MSG_MIXER                           = _UxGT("Mixer");
-  PROGMEM Language_Str MSG_GRADIENT                        = _UxGT("Gradient");
-  PROGMEM Language_Str MSG_FULL_GRADIENT                   = _UxGT("Full Gradient");
-  PROGMEM Language_Str MSG_TOGGLE_MIX                      = _UxGT("Toggle Mix");
-  PROGMEM Language_Str MSG_CYCLE_MIX                       = _UxGT("Cycle Mix");
-  PROGMEM Language_Str MSG_GRADIENT_MIX                    = _UxGT("Gradient Mix");
-  PROGMEM Language_Str MSG_REVERSE_GRADIENT                = _UxGT("Reverse Gradient");
-  PROGMEM Language_Str MSG_ACTIVE_VTOOL                    = _UxGT("Active V-tool");
-  PROGMEM Language_Str MSG_START_VTOOL                     = _UxGT("Start V-tool");
-  PROGMEM Language_Str MSG_END_VTOOL                       = _UxGT("  End V-tool");
-  PROGMEM Language_Str MSG_GRADIENT_ALIAS                  = _UxGT("Alias V-tool");
-  PROGMEM Language_Str MSG_RESET_VTOOLS                    = _UxGT("Reset V-tools");
-  PROGMEM Language_Str MSG_COMMIT_VTOOL                    = _UxGT("Commit V-tool Mix");
-  PROGMEM Language_Str MSG_VTOOLS_RESET                    = _UxGT("V-tools Were Reset");
-  PROGMEM Language_Str MSG_START_Z                         = _UxGT("Start Z:");
-  PROGMEM Language_Str MSG_END_Z                           = _UxGT("  End Z:");
-
-  PROGMEM Language_Str MSG_GAMES                           = _UxGT("Games");
-  PROGMEM Language_Str MSG_BRICKOUT                        = _UxGT("Brickout");
-  PROGMEM Language_Str MSG_INVADERS                        = _UxGT("Invaders");
-  PROGMEM Language_Str MSG_SNAKE                           = _UxGT("Sn4k3");
-  PROGMEM Language_Str MSG_MAZE                            = _UxGT("Maze");
-
   //
   // Filament Change screens show up to 3 lines on a 4-line display
   //                        ...or up to 2 lines on a 3-line display
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE    = _UxGT(MSG_1_LINE("按下完成.."));     //"Click to finish"
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME        = _UxGT(MSG_1_LINE("恢復中 ..."));     //"Resuming..."
   #endif // LCD_HEIGHT < 4
-
-  PROGMEM Language_Str MSG_TMC_DRIVERS                     = _UxGT("TMC Drivers");
-  PROGMEM Language_Str MSG_TMC_CURRENT                     = _UxGT("Driver Current");
-  PROGMEM Language_Str MSG_TMC_HYBRID_THRS                 = _UxGT("Hybrid Threshold");
-  PROGMEM Language_Str MSG_TMC_HOMING_THRS                 = _UxGT("Sensorless Homing");
-  PROGMEM Language_Str MSG_TMC_STEPPING_MODE               = _UxGT("Stepping Mode");
-  PROGMEM Language_Str MSG_TMC_STEALTH_ENABLED             = _UxGT("StealthChop Enabled");
-  PROGMEM Language_Str MSG_SERVICE_RESET                   = _UxGT("Reset");
-  PROGMEM Language_Str MSG_SERVICE_IN                      = _UxGT(" in:");
-  PROGMEM Language_Str MSG_BACKLASH                        = _UxGT("Backlash");
-  PROGMEM Language_Str MSG_BACKLASH_A                      = LCD_STR_A;
-  PROGMEM Language_Str MSG_BACKLASH_B                      = LCD_STR_B;
-  PROGMEM Language_Str MSG_BACKLASH_C                      = LCD_STR_C;
-  PROGMEM Language_Str MSG_BACKLASH_CORRECTION             = _UxGT("Correction");
-  PROGMEM Language_Str MSG_BACKLASH_SMOOTHING              = _UxGT("Smoothing");
 }
 
 #if FAN_COUNT == 1