Config updates, spacing mainly

.travis.yml

   - opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS
   - opt_enable BLINKM PCA9632 RGB_LED NEOPIXEL_LED
   - opt_enable AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE
-  - opt_enable_adv FWRETRACT MAX7219_DEBUG
+  - opt_enable_adv FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU
   - opt_set ABL_GRID_POINTS_X 16
   - opt_set ABL_GRID_POINTS_Y 16
   - opt_set_adv FANMUX0_PIN 53

Marlin/Conditionals_post.h

     #define MAX_VFAT_ENTRIES (2)
   #endif
 
+  // Set defaults for unspecified LED user colors
+  #if ENABLED(LED_CONTROL_MENU)
+    #ifndef LED_USER_PRESET_RED
+      #define LED_USER_PRESET_RED       255
+    #endif
+    #ifndef LED_USER_PRESET_GREEN
+      #define LED_USER_PRESET_GREEN     255
+    #endif
+    #ifndef LED_USER_PRESET_BLUE
+      #define LED_USER_PRESET_BLUE      255
+    #endif
+    #ifndef LED_USER_PRESET_WHITE
+      #define LED_USER_PRESET_WHITE     0
+    #endif
+    #ifndef LED_USER_PRESET_BRIGHTNESS
+      #ifdef NEOPIXEL_BRIGHTNESS
+        #define LED_USER_PRESET_BRIGHTNESS NEOPIXEL_BRIGHTNESS
+      #else
+        #define LED_USER_PRESET_BRIGHTNESS 255
+      #endif
+    #endif
+  #endif
+
 #endif // CONDITIONALS_POST_H

Marlin/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/SanityCheck.h

 #if !BLOCK_BUFFER_SIZE || !IS_POWER_OF_2(BLOCK_BUFFER_SIZE)
   #error "BLOCK_BUFFER_SIZE must be a power of 2."
 #endif
+
+#if ENABLED(LED_CONTROL_MENU) && DISABLED(ULTIPANEL)
+  #error "LED_CONTROL_MENU requires an LCD controller."
+#endif

Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/Anet/A6/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/Anet/A8/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/Cartesio/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/Creality/CR-10/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/Felix/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/Malyan/M150/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/RigidBot/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/SCARA/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/Sanguinololu/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/TinyBoy2/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/Velleman/K8200/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/Velleman/K8400/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/delta/generic/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/makibox/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)

Marlin/example_configurations/wt150/Configuration_adv.h

 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)