Merge pull request #6860 from thinkyhead/bf_case_light_toggle

Case light as a toggle menu item

Marlin/language_an.h

 #define MSG_INFO_EXTRUDERS                  _UxGT("Extrusors")
 #define MSG_INFO_BAUDRATE                   _UxGT("Baudios")
 #define MSG_INFO_PROTOCOL                   _UxGT("Protocolo")
-#define MSG_LIGHTS_ON                       _UxGT("Enchegar luz")
-#define MSG_LIGHTS_OFF                      _UxGT("Desenchegar luz")
+#define MSG_CASE_LIGHT                      _UxGT("Luz")
 
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Conteo de impresion")

Marlin/language_bg.h

 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" Готов.")
 #define MSG_SD_INSERTED                     _UxGT("Картата е поставена")
 #define MSG_SD_REMOVED                      _UxGT("Картата е извадена")
-#define MSG_LCD_ENDSTOPS                    _UxGT("Endstops") // Max length 8 characters
 #define MSG_MAIN                            _UxGT("Меню")
 #define MSG_AUTOSTART                       _UxGT("Автостарт")
 #define MSG_DISABLE_STEPPERS                _UxGT("Изкл. двигатели")
 #define MSG_AUTO_HOME                       _UxGT("Паркиране")
-#define MSG_AUTO_HOME_X                     _UxGT("Home X")
-#define MSG_AUTO_HOME_Y                     _UxGT("Home Y")
-#define MSG_AUTO_HOME_Z                     _UxGT("Home Z")
-#define MSG_LEVEL_BED_HOMING                _UxGT("Homing XYZ")
-#define MSG_LEVEL_BED_WAITING               _UxGT("Click to Begin")
-#define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Next Point")
-#define MSG_LEVEL_BED_DONE                  _UxGT("Leveling Done!")
 #define MSG_SET_HOME_OFFSETS                _UxGT("Задай Начало")
-#define MSG_HOME_OFFSETS_APPLIED            _UxGT("Offsets applied")
 #define MSG_SET_ORIGIN                      _UxGT("Изходна точка")
 #define MSG_PREHEAT_1                       _UxGT("Подгряване PLA")
 #define MSG_PREHEAT_1_N                     _UxGT("Подгряване PLA")
 #define MSG_AUTOTEMP                        _UxGT("Авто-темп.")
 #define MSG_ON                              _UxGT("Вкл. ")
 #define MSG_OFF                             _UxGT("Изкл. ")
-#define MSG_PID_P                           _UxGT("PID-P")
-#define MSG_PID_I                           _UxGT("PID-I")
-#define MSG_PID_D                           _UxGT("PID-D")
-#define MSG_PID_C                           _UxGT("PID-C")
-#define MSG_SELECT                          _UxGT("Select")
-#define MSG_ACC                             _UxGT("Acc")
-#define MSG_JERK                            _UxGT("Jerk")
-#define MSG_VX_JERK                         _UxGT("Vx-jerk")
-#define MSG_VY_JERK                         _UxGT("Vy-jerk")
-#define MSG_VZ_JERK                         _UxGT("Vz-jerk")
-#define MSG_VE_JERK                         _UxGT("Ve-jerk")
-#define MSG_VMAX                            _UxGT("Vmax ")
-#define MSG_VMIN                            _UxGT("Vmin")
-#define MSG_VTRAV_MIN                       _UxGT("VTrav min")
-#define MSG_AMAX                            _UxGT("Amax ")
 #define MSG_A_RETRACT                       _UxGT("A-откат")
 #define MSG_A_TRAVEL                        _UxGT("A-travel")
 #define MSG_STEPS_PER_MM                    _UxGT("Стъпки/mm")
 #define MSG_INIT_SDCARD                     _UxGT("Иниц. SD-Карта")
 #define MSG_CNG_SDCARD                      _UxGT("Смяна SD-Карта")
 #define MSG_ZPROBE_OUT                      _UxGT("Z-сондата е извадена")
-#define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Self-Test")
-#define MSG_BLTOUCH_RESET                   _UxGT("Reset BLTouch")
-#define MSG_HOME                            _UxGT("Home")  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
-#define MSG_FIRST                           _UxGT("first")
 #define MSG_ZPROBE_ZOFFSET                  _UxGT("Z Отстояние")
 #define MSG_BABYSTEP_X                      _UxGT("Министъпка X")
 #define MSG_BABYSTEP_Y                      _UxGT("Министъпка Y")
 #define MSG_BABYSTEP_Z                      _UxGT("Министъпка Z")
 #define MSG_ENDSTOP_ABORT                   _UxGT("Стоп Кр.Изключватели")
-#define MSG_HEATING_FAILED_LCD              _UxGT("Heating failed")
-#define MSG_ERR_REDUNDANT_TEMP              _UxGT("Err: REDUNDANT TEMP")
-#define MSG_THERMAL_RUNAWAY                 _UxGT("THERMAL RUNAWAY")
-#define MSG_ERR_MAXTEMP                     _UxGT("Err: MAXTEMP")
-#define MSG_ERR_MINTEMP                     _UxGT("Err: MINTEMP")
-#define MSG_ERR_MAXTEMP_BED                 _UxGT("Err: MAXTEMP BED")
-#define MSG_ERR_MINTEMP_BED                 _UxGT("Err: MINTEMP BED")
-#define MSG_ERR_Z_HOMING                    _UxGT("G28 Z Forbidden")
-#define MSG_HALTED                          _UxGT("PRINTER HALTED")
-#define MSG_PLEASE_RESET                    _UxGT("Please reset")
-#define MSG_SHORT_DAY                       _UxGT("d") // One character only
-#define MSG_SHORT_HOUR                      _UxGT("h") // One character only
-#define MSG_SHORT_MINUTE                    _UxGT("m") // One character only
-#define MSG_HEATING                         _UxGT("Heating...")
-#define MSG_HEATING_COMPLETE                _UxGT("Heating done.")
-#define MSG_BED_HEATING                     _UxGT("Bed Heating.")
-#define MSG_BED_DONE                        _UxGT("Bed done.")
 #define MSG_DELTA_CALIBRATE                 _UxGT("Делта Калибровка")
 #define MSG_DELTA_CALIBRATE_X               _UxGT("Калибровка X")
 #define MSG_DELTA_CALIBRATE_Y               _UxGT("Калибровка Y")
 #define MSG_DELTA_CALIBRATE_Z               _UxGT("Калибровка Z")
 #define MSG_DELTA_CALIBRATE_CENTER          _UxGT("Калибровка Център")
 
-#define MSG_INFO_MENU                       _UxGT("About Printer")
-#define MSG_INFO_PRINTER_MENU               _UxGT("Printer Info")
-#define MSG_INFO_STATS_MENU                 _UxGT("Printer Stats")
-#define MSG_INFO_BOARD_MENU                 _UxGT("Board Info")
-#define MSG_INFO_THERMISTOR_MENU            _UxGT("Thermistors")
-#define MSG_INFO_EXTRUDERS                  _UxGT("Extruders")
-#define MSG_INFO_BAUDRATE                   _UxGT("Baud")
-#define MSG_INFO_PROTOCOL                   _UxGT("Protocol")
-#define MSG_LIGHTS_ON                       _UxGT("Case light on")
-#define MSG_LIGHTS_OFF                      _UxGT("Case light off")
-
-#if LCD_WIDTH >= 20
-  #define MSG_INFO_PRINT_COUNT              _UxGT("Print Count")
-  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Completed")
-  #define MSG_INFO_PRINT_TIME               _UxGT("Total print time")
-  #define MSG_INFO_PRINT_LONGEST            _UxGT("Longest job time")
-  #define MSG_INFO_PRINT_FILAMENT           _UxGT("Extruded total")
-#else
-  #define MSG_INFO_PRINT_COUNT              _UxGT("Prints")
-  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Completed")
-  #define MSG_INFO_PRINT_TIME               _UxGT("Total")
-  #define MSG_INFO_PRINT_LONGEST            _UxGT("Longest")
-  #define MSG_INFO_PRINT_FILAMENT           _UxGT("Extruded")
-#endif
-
-#define MSG_INFO_MIN_TEMP                   _UxGT("Min Temp")
-#define MSG_INFO_MAX_TEMP                   _UxGT("Max Temp")
-#define MSG_INFO_PSU                        _UxGT("Power Supply")
-
-#define MSG_DRIVE_STRENGTH                  _UxGT("Drive Strength")
-#define MSG_DAC_PERCENT                     _UxGT("Driver %")
-#define MSG_DAC_EEPROM_WRITE                _UxGT("DAC EEPROM Write")
-
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("PRINT PAUSED")
-#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("RESUME OPTIONS:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Extrude more")
-#define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Resume print")
-
-#if LCD_HEIGHT >= 4
-  // Up to 3 lines allowed
-  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Wait for start")
-  #define MSG_FILAMENT_CHANGE_INIT_2          _UxGT("of the filament")
-  #define MSG_FILAMENT_CHANGE_INIT_3          _UxGT("change")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Wait for")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_2        _UxGT("filament unload")
-  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Insert filament")
-  #define MSG_FILAMENT_CHANGE_INSERT_2        _UxGT("and press button")
-  #define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("to continue...")
-  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Wait for")
-  #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("filament load")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Wait for")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("filament extrude")
-  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Wait for print")
-  #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("to resume")
-#else // LCD_HEIGHT < 4
-  // Up to 2 lines allowed
-  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Please wait...")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Ejecting...")
-  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Insert and Click")
-  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Loading...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Extruding...")
-  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Resuming...")
-#endif // LCD_HEIGHT < 4
-
 #endif // LANGUAGE_BG_H

Marlin/language_ca.h

 #define MSG_INFO_EXTRUDERS                  _UxGT("Extrusors")
 #define MSG_INFO_BAUDRATE                   _UxGT("Baud")
 #define MSG_INFO_PROTOCOL                   _UxGT("Protocol")
-#define MSG_LIGHTS_ON                       _UxGT("Encen el llum")
-#define MSG_LIGHTS_OFF                      _UxGT("Apaga el llum")
+#define MSG_CASE_LIGHT                      _UxGT("Llum")
 
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Total impressions")

Marlin/language_cz.h

 #define MSG_INFO_EXTRUDERS                  _UxGT("Extrudery")
 #define MSG_INFO_BAUDRATE                   _UxGT("Rychlost")
 #define MSG_INFO_PROTOCOL                   _UxGT("Protokol")
-#define MSG_LIGHTS_ON                       _UxGT("Osvetleni Zap")
-#define MSG_LIGHTS_OFF                      _UxGT("Osvetleni Vyp")
+#define MSG_CASE_LIGHT                      _UxGT("Osvetleni")
+
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Pocet tisku")
   #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Dokonceno")
   #define MSG_INFO_PRINT_LONGEST            _UxGT("Nejdelsi")
   #define MSG_INFO_PRINT_FILAMENT           _UxGT("Vytlaceno")
 #endif
+
 #define MSG_INFO_MIN_TEMP                   _UxGT("Teplota min")
 #define MSG_INFO_MAX_TEMP                   _UxGT("Teplota max")
 #define MSG_INFO_PSU                        _UxGT("Nap. zdroj")

Marlin/language_de.h

 #define MSG_INFO_EXTRUDERS                  _UxGT("Extruder")
 #define MSG_INFO_BAUDRATE                   _UxGT("Baud")
 #define MSG_INFO_PROTOCOL                   _UxGT("Protokoll")
-#define MSG_LIGHTS_ON                       _UxGT("Gehäuse Licht an")
-#define MSG_LIGHTS_OFF                      _UxGT("Gehäuse Licht aus")
+#define MSG_CASE_LIGHT                      _UxGT("Licht")
 
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Gesamte Drucke")
   #define MSG_INFO_PRINT_LONGEST            _UxGT("Längster")
   #define MSG_INFO_PRINT_FILAMENT           _UxGT("Extrud.")
 #endif
+
 #define MSG_INFO_MIN_TEMP                   _UxGT("Min Temp")
 #define MSG_INFO_MAX_TEMP                   _UxGT("Max Temp")
 #define MSG_INFO_PSU                        _UxGT("Stromversorgung")

Marlin/language_en.h

 #ifndef MSG_INFO_PROTOCOL
   #define MSG_INFO_PROTOCOL                   _UxGT("Protocol")
 #endif
-#ifndef MSG_LIGHTS_ON
-  #define MSG_LIGHTS_ON                       _UxGT("Case light on")
-#endif
-#ifndef MSG_LIGHTS_OFF
-  #define MSG_LIGHTS_OFF                      _UxGT("Case light off")
+#ifndef MSG_CASE_LIGHT
+  #define MSG_CASE_LIGHT                      _UxGT("Case light")
 #endif
 
 #if LCD_WIDTH >= 20

Marlin/language_es.h

 #define MSG_INFO_EXTRUDERS                  _UxGT("Extrusores")
 #define MSG_INFO_BAUDRATE                   _UxGT("Baudios")
 #define MSG_INFO_PROTOCOL                   _UxGT("Protocolo")
-#define MSG_LIGHTS_ON                       _UxGT("Luz cabina ON")
-#define MSG_LIGHTS_OFF                      _UxGT("Luz cabina OFF")
+#define MSG_CASE_LIGHT                      _UxGT("Luz cabina")
+
 #if LCD_WIDTH > 19
   #define MSG_INFO_PRINT_COUNT              _UxGT("Conteo de impresion")
   #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Completadas")
   #define MSG_INFO_PRINT_LONGEST            _UxGT("Mas larga")
   #define MSG_INFO_PRINT_FILAMENT           _UxGT("Extrusion")
 #endif
+
 #define MSG_INFO_MIN_TEMP                   _UxGT("Temperatura minima")
 #define MSG_INFO_MAX_TEMP                   _UxGT("Temperatura maxima")
 #define MSG_INFO_PSU                        _UxGT("Fuente de poder")

Marlin/language_eu.h

 #define MSG_INFO_EXTRUDERS                  _UxGT("Estrusoreak")
 #define MSG_INFO_BAUDRATE                   _UxGT("Baudioak")
 #define MSG_INFO_PROTOCOL                   _UxGT("Protokoloa")
-#define MSG_LIGHTS_ON                       _UxGT("Kabina Argia ON")
-#define MSG_LIGHTS_OFF                      _UxGT("Kabina Argia OFF")
+#define MSG_CASE_LIGHT                      _UxGT("Kabina Argia")
+
 #if LCD_WIDTH > 19
   #define MSG_INFO_PRINT_COUNT              _UxGT("Inprim. Zenbaketa")
   #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Burututa")

Marlin/language_fr.h

 #define MSG_INFO_EXTRUDERS                  _UxGT("Extrudeurs")
 #define MSG_INFO_BAUDRATE                   _UxGT("Baud")
 #define MSG_INFO_PROTOCOL                   _UxGT("Protocole")
-#define MSG_LIGHTS_ON                       _UxGT("Allumer boîtier")
-#define MSG_LIGHTS_OFF                      _UxGT("Eteindre boîtier")
+#define MSG_CASE_LIGHT                      _UxGT("Lumière")
 
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Nbre impressions")

Marlin/language_gl.h

 #define MSG_INFO_EXTRUDERS                  _UxGT("Extrusores")
 #define MSG_INFO_BAUDRATE                   _UxGT("Baudios")
 #define MSG_INFO_PROTOCOL                   _UxGT("Protocolo")
-#define MSG_LIGHTS_ON                       _UxGT("Acender a luz")
-#define MSG_LIGHTS_OFF                      _UxGT("Apagar a luz")
+#define MSG_CASE_LIGHT                      _UxGT("Luz")
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Total traballos")
   #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Total completos")

Marlin/language_hr.h

 #define MSG_INFO_EXTRUDERS                  _UxGT("Extruderi")
 #define MSG_INFO_BAUDRATE                   _UxGT("Baud")
 #define MSG_INFO_PROTOCOL                   _UxGT("Protokol")
-#define MSG_LIGHTS_ON                       _UxGT("Upali osvjetljenje")
-#define MSG_LIGHTS_OFF                      _UxGT("Ugasi osvjetljenje")
+#define MSG_CASE_LIGHT                      _UxGT("Osvjetljenje")
 
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Broj printova")

Marlin/language_it.h

 #define MSG_INFO_EXTRUDERS                  _UxGT("Estrusori")
 #define MSG_INFO_BAUDRATE                   _UxGT("Baud")
 #define MSG_INFO_PROTOCOL                   _UxGT("Protocollo")
-#define MSG_LIGHTS_ON                       _UxGT("Luci Case on")
-#define MSG_LIGHTS_OFF                      _UxGT("Luci Case off")
+#define MSG_CASE_LIGHT                      _UxGT("Luci Case")
+
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Contat. stampa")
   #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Completati")

Marlin/language_kana.h

 #define MSG_INFO_EXTRUDERS                  "\xb4\xb8\xbd\xc4\xd9\xb0\xc0\xde\xb0\xbd\xb3"                     // "ｴｸｽﾄﾙｰﾀﾞｰｽｳ" ("Extruders")
 #define MSG_INFO_BAUDRATE                   "\xce\xde\xb0\xda\xb0\xc4"                                         // "ﾎﾞｰﾚｰﾄ" ("Baud")
 #define MSG_INFO_PROTOCOL                   "\xcc\xdf\xdb\xc4\xba\xd9"                                         // "ﾌﾟﾛﾄｺﾙ" ("Protocol")
-#define MSG_LIGHTS_ON                       "\xb7\xae\xb3\xc0\xb2\xc5\xb2\xbc\xae\xb3\xd2\xb2\x20\xb5\xdd"     // "ｷｮｳﾀｲﾅｲｼｮｳﾒｲ ｵﾝ" ("Case light on")
-#define MSG_LIGHTS_OFF                      "\xb7\xae\xb3\xc0\xb2\xc5\xb2\xbc\xae\xb3\xd2\xb2\x20\xb5\xcc"     // "ｷｮｳﾀｲﾅｲｼｮｳﾒｲ ｵﾌ" ("Case light off")
+#define MSG_CASE_LIGHT                      "\xb7\xae\xb3\xc0\xb2\xc5\xb2\xbc\xae\xb3\xd2\xb2"                 // "ｷｮｳﾀｲﾅｲｼｮｳﾒｲ" ("Case light")
 #define MSG_INFO_PRINT_COUNT                "\xcc\xdf\xd8\xdd\xc4\xbd\xb3"                                     // "ﾌﾟﾘﾝﾄｽｳ" ("Print Count")
 #define MSG_INFO_COMPLETED_PRINTS           "\xb6\xdd\xd8\xae\xb3\xbd\xb3"                                     // "ｶﾝﾘｮｳｽｳ" ("Completed")
 #define MSG_INFO_PRINT_TIME                 "\xcc\xdf\xd8\xdd\xc4\xbc\xde\xb6\xdd\xd9\xb2\xb9\xb2"             // "ﾌﾟﾘﾝﾄｼﾞｶﾝﾙｲｹｲ" ("Total print time")

Marlin/language_kana_utf8.h

 #define MSG_INFO_EXTRUDERS                  _UxGT("エクストルーダースウ")             // "Extruders"
 #define MSG_INFO_BAUDRATE                   _UxGT("ボーレート")                    // "Baud"
 #define MSG_INFO_PROTOCOL                   _UxGT("プロトコル")                    // "Protocol"
-#define MSG_LIGHTS_ON                       _UxGT("キョウタイナイショウメイ オン")       // "Case light on"
-#define MSG_LIGHTS_OFF                      _UxGT("キョウタイナイショウメイ オフ")       // "Case light off"
+#define MSG_CASE_LIGHT                      _UxGT("キョウタイナイショウメイ")       // "Case light"
 #define MSG_INFO_PRINT_COUNT                _UxGT("プリントスウ ")                  // "Print Count"
 #define MSG_INFO_COMPLETED_PRINTS           _UxGT("カンリョウスウ")                  // "Completed"
 #define MSG_INFO_PRINT_TIME                 _UxGT("プリントジカンルイケイ")            // "Total print time"

Marlin/language_nl.h

 #define MSG_INFO_MENU                       _UxGT("Over Printer")
 #define MSG_INFO_PRINTER_MENU               _UxGT("Printer Info")
 #define MSG_INFO_PROTOCOL                   _UxGT("Protocol")
-#define MSG_LIGHTS_ON                       _UxGT("Case licht aan")
-#define MSG_LIGHTS_OFF                      _UxGT("Case licht uit")
+#define MSG_CASE_LIGHT                      _UxGT("Case licht")
 
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Printed Aantal")

Marlin/language_pl-DOGM.h

+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Polish for DOGM display - includes accented characters
+ */
+
+#define WELCOME_MSG                         MACHINE_NAME _UxGT(" gotowy.")
+#define MSG_SD_INSERTED                     _UxGT("Karta włożona")
+#define MSG_SD_REMOVED                      _UxGT("Karta usunięta")
+#define MSG_LCD_ENDSTOPS                    _UxGT("Kranców.") // Max length 8 characters
+#define MSG_MAIN                            _UxGT("Menu główne")
+#define MSG_AUTOSTART                       _UxGT("Autostart")
+#define MSG_DISABLE_STEPPERS                _UxGT("Wyłącz silniki")
+#define MSG_AUTO_HOME                       _UxGT("Pozycja zerowa")
+#define MSG_AUTO_HOME_X                     _UxGT("Zeruj X")
+#define MSG_AUTO_HOME_Y                     _UxGT("Zeruj Y")
+#define MSG_AUTO_HOME_Z                     _UxGT("Zeruj Z")
+#define MSG_LEVEL_BED                       _UxGT("Poziom. stołu")
+#define MSG_LEVEL_BED_HOMING                _UxGT("Pozycja zerowa")
+#define MSG_LEVEL_BED_WAITING               _UxGT("Kliknij by rozp.")
+#define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Następny punkt")
+#define MSG_LEVEL_BED_DONE                  _UxGT("Wypoziomowano!")
+#define MSG_SET_HOME_OFFSETS                _UxGT("Ust. poz. zer.")
+#define MSG_HOME_OFFSETS_APPLIED            _UxGT("Poz. zerowa ust.")
+#define MSG_SET_ORIGIN                      _UxGT("Ustaw punkt zero")
+#define MSG_PREHEAT_1                       _UxGT("Rozgrzej PLA")
+#define MSG_PREHEAT_1_N                     MSG_PREHEAT_1 _UxGT(" ")
+#define MSG_PREHEAT_1_ALL                   MSG_PREHEAT_1 _UxGT(" wsz.")
+#define MSG_PREHEAT_1_BEDONLY               _UxGT("Rozgrzej stół PLA")
+#define MSG_PREHEAT_1_SETTINGS              _UxGT("Ustaw. rozg. PLA")
+#define MSG_PREHEAT_2                       _UxGT("Rozgrzej ABS")
+#define MSG_PREHEAT_2_N                     MSG_PREHEAT_2 _UxGT(" ")
+#define MSG_PREHEAT_2_ALL                   MSG_PREHEAT_2 _UxGT(" wsz.")
+#define MSG_PREHEAT_2_BEDONLY               _UxGT("Rozgrzej stół ABS")
+#define MSG_PREHEAT_2_SETTINGS              _UxGT("Ustaw. rozg. ABS")
+#define MSG_COOLDOWN                        _UxGT("Chłodzenie")
+#define MSG_SWITCH_PS_ON                    _UxGT("Włącz zasilacz")
+#define MSG_SWITCH_PS_OFF                   _UxGT("Wyłącz zasilacz")
+#define MSG_EXTRUDE                         _UxGT("Ekstruzja")
+#define MSG_RETRACT                         _UxGT("Wycofanie")
+#define MSG_MOVE_AXIS                       _UxGT("Ruch osi")
+#define MSG_BED_LEVELING                    _UxGT("Poziom. stołu")
+#define MSG_MOVE_X                          _UxGT("Przesuń w X")
+#define MSG_MOVE_Y                          _UxGT("Przesuń w Y")
+#define MSG_MOVE_Z                          _UxGT("Przesuń w Z")
+#define MSG_MOVE_E                          _UxGT("Ekstruzja (os E)")
+#define MSG_MOVE_01MM                       _UxGT("Przesuń co .1mm")
+#define MSG_MOVE_1MM                        _UxGT("Przesuń co 1mm")
+#define MSG_MOVE_10MM                       _UxGT("Przesuń co 10mm")
+#define MSG_SPEED                           _UxGT("Predkość")
+#define MSG_BED_Z                           _UxGT("Stół Z")
+#define MSG_NOZZLE                          _UxGT("Dysza")
+#define MSG_BED                             _UxGT("Stół")
+#define MSG_FAN_SPEED                       _UxGT("Obroty wiatraka")
+#define MSG_FLOW                            _UxGT("Przepływ")
+#define MSG_CONTROL                         _UxGT("Ustawienia")
+#define MSG_MIN                             LCD_STR_THERMOMETER _UxGT(" Min")
+#define MSG_MAX                             LCD_STR_THERMOMETER _UxGT(" Max")
+#define MSG_FACTOR                          LCD_STR_THERMOMETER _UxGT(" Mnożnik")
+#define MSG_AUTOTEMP                        _UxGT("Auto. temperatura")
+#define MSG_ON                              _UxGT("Wł. ")
+#define MSG_OFF                             _UxGT("Wył.")
+#define MSG_PID_P                           _UxGT("PID-P")
+#define MSG_PID_I                           _UxGT("PID-I")
+#define MSG_PID_D                           _UxGT("PID-D")
+#define MSG_PID_C                           _UxGT("PID-C")
+#define MSG_SELECT                          _UxGT("Select")
+#define MSG_ACC                             _UxGT("Przyśpieszenie")
+#define MSG_JERK                            _UxGT("Zryw")
+#define MSG_VX_JERK                         _UxGT("Zryw Vx")
+#define MSG_VY_JERK                         _UxGT("Zryw Vy")
+#define MSG_VZ_JERK                         _UxGT("Zryw Vz")
+#define MSG_VE_JERK                         _UxGT("Zryw Ve")
+#define MSG_VMAX                            _UxGT("Vmax ")
+#define MSG_VMIN                            _UxGT("Vmin")
+#define MSG_VTRAV_MIN                       _UxGT("Vskok min")
+#define MSG_ACCELERATION                    MSG_ACC
+#define MSG_AMAX                            _UxGT("Amax")
+#define MSG_A_RETRACT                       _UxGT("A-wycofanie")
+#define MSG_A_TRAVEL                        _UxGT("A-przesuń.")
+#define MSG_STEPS_PER_MM                    _UxGT("kroki/mm")
+#define MSG_XSTEPS                          _UxGT("krokiX/mm")
+#define MSG_YSTEPS                          _UxGT("krokiY/mm")
+#define MSG_ZSTEPS                          _UxGT("krokiZ/mm")
+#define MSG_ESTEPS                          _UxGT("krokiE/mm")
+#define MSG_E1STEPS                         _UxGT("krokiE1/mm")
+#define MSG_E2STEPS                         _UxGT("krokiE2/mm")
+#define MSG_E3STEPS                         _UxGT("krokiE3/mm")
+#define MSG_E4STEPS                         _UxGT("krokiE4/mm")
+#define MSG_E5STEPS                         _UxGT("krokiE5/mm")
+#define MSG_TEMPERATURE                     _UxGT("Temperatura")
+#define MSG_MOTION                          _UxGT("Ruch")
+#define MSG_FILAMENT                        _UxGT("Filament")
+#define MSG_VOLUMETRIC_ENABLED              _UxGT("E w mm3")
+#define MSG_FILAMENT_DIAM                   _UxGT("Śr. fil.")
+#define MSG_CONTRAST                        _UxGT("Kontrast LCD")
+#define MSG_STORE_EEPROM                    _UxGT("Zapisz w pamięci")
+#define MSG_LOAD_EEPROM                     _UxGT("Wczytaj z pamięci")
+#define MSG_RESTORE_FAILSAFE                _UxGT("Ustaw. fabryczne")
+#define MSG_REFRESH                         _UxGT("Odswież")
+#define MSG_WATCH                           _UxGT("Ekran główny")
+#define MSG_PREPARE                         _UxGT("Przygotuj")
+#define MSG_TUNE                            _UxGT("Strojenie")
+#define MSG_PAUSE_PRINT                     _UxGT("Pauza")
+#define MSG_RESUME_PRINT                    _UxGT("Wznowienie")
+#define MSG_STOP_PRINT                      _UxGT("Stop")
+#define MSG_CARD_MENU                       _UxGT("Karta SD")
+#define MSG_NO_CARD                         _UxGT("Brak karty")
+#define MSG_DWELL                           _UxGT("Uśpij...")
+#define MSG_USERWAIT                        _UxGT("Oczekiwanie...")
+#define MSG_RESUMING                        _UxGT("Wznawianie druku")
+#define MSG_PRINT_ABORTED                   _UxGT("Druk przerwany")
+#define MSG_NO_MOVE                         _UxGT("Brak ruchu")
+#define MSG_KILLED                          _UxGT("Ubity. ")
+#define MSG_STOPPED                         _UxGT("Zatrzymany. ")
+#define MSG_CONTROL_RETRACT                 _UxGT("Wycofaj mm")
+#define MSG_CONTROL_RETRACT_SWAP            _UxGT("Z Wycof. mm")
+#define MSG_CONTROL_RETRACTF                _UxGT("Wycofaj  V")
+#define MSG_CONTROL_RETRACT_ZLIFT           _UxGT("Skok Z mm")
+#define MSG_CONTROL_RETRACT_RECOVER         _UxGT("Cof. wycof. mm")
+#define MSG_CONTROL_RETRACT_RECOVER_SWAP    _UxGT("Z Cof. wyc. mm")
+#define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("Cof. wycof.  V")
+#define MSG_AUTORETRACT                     _UxGT("Auto. wycofanie")
+#define MSG_FILAMENTCHANGE                  _UxGT("Zmień filament")
+#define MSG_INIT_SDCARD                     _UxGT("Inicjal. karty SD")
+#define MSG_CNG_SDCARD                      _UxGT("Zmiana karty SD")
+#define MSG_ZPROBE_OUT                      _UxGT("Sonda Z za stołem")
+#define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Self-Test")
+#define MSG_BLTOUCH_RESET                   _UxGT("Reset BLTouch")
+#define MSG_HOME                            _UxGT("Home")  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           _UxGT("first")
+#define MSG_ZPROBE_ZOFFSET                  _UxGT("Offset Z")
+#define MSG_BABYSTEP_X                      _UxGT("Babystep X")
+#define MSG_BABYSTEP_Y                      _UxGT("Babystep Y")
+#define MSG_BABYSTEP_Z                      _UxGT("Babystep Z")
+#define MSG_ENDSTOP_ABORT                   _UxGT("Błąd krańcówki")
+#define MSG_HEATING_FAILED_LCD              _UxGT("Rozgrz. nieudane")
+#define MSG_ERR_REDUNDANT_TEMP              _UxGT("Błąd temperatury")
+#define MSG_THERMAL_RUNAWAY                 _UxGT("Zanik temp.")
+#define MSG_ERR_MAXTEMP                     _UxGT("Err max temp")
+#define MSG_ERR_MINTEMP                     _UxGT("Err min temp")
+#define MSG_ERR_MAXTEMP_BED                 _UxGT("Err max temp stołu")
+#define MSG_ERR_MINTEMP_BED                 _UxGT("Err min temp stołu")
+#define MSG_ERR_Z_HOMING                    _UxGT("G28 Z Forbidden")
+#define MSG_HALTED                          _UxGT("Drukarka zatrzym.")
+#define MSG_PLEASE_RESET                    _UxGT("Proszę zresetować")
+#define MSG_SHORT_DAY                       _UxGT("d") // One character only
+#define MSG_SHORT_HOUR                      _UxGT("g") // One character only
+#define MSG_SHORT_MINUTE                    _UxGT("m") // One character only
+#define MSG_HEATING                         _UxGT("Rozgrzewanie...")
+#define MSG_HEATING_COMPLETE                _UxGT("Rozgrzano")
+#define MSG_BED_HEATING                     _UxGT("Rozgrzewanie stołu...")
+#define MSG_BED_DONE                        _UxGT("Rozgrzano stół")
+#define MSG_DELTA_CALIBRATE                 _UxGT("Kalibrowanie Delty")
+#define MSG_DELTA_CALIBRATE_X               _UxGT("Kalibruj X")
+#define MSG_DELTA_CALIBRATE_Y               _UxGT("Kalibruj Y")
+#define MSG_DELTA_CALIBRATE_Z               _UxGT("Kalibruj Z")
+#define MSG_DELTA_CALIBRATE_CENTER          _UxGT("Kalibruj środek")
+
+#define MSG_INFO_MENU                       _UxGT("O drukarce")
+#define MSG_INFO_PRINTER_MENU               _UxGT("Info drukarki")
+#define MSG_INFO_STATS_MENU                 _UxGT("Statystyki")
+#define MSG_INFO_BOARD_MENU                 _UxGT("Board Info")
+#define MSG_INFO_THERMISTOR_MENU            _UxGT("Thermistory")
+#define MSG_INFO_EXTRUDERS                  _UxGT("Ekstrudery")
+#define MSG_INFO_BAUDRATE                   _UxGT("Predkość USB")
+#define MSG_INFO_PROTOCOL                   _UxGT("Protokół")
+#define MSG_CASE_LIGHT                      _UxGT("Oświetlenie")
+
+#if LCD_WIDTH >= 20
+  #define MSG_INFO_PRINT_COUNT              _UxGT("Wydrukowano")
+  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Ukończono")
+  #define MSG_INFO_PRINT_TIME               _UxGT("Czas druku")
+  #define MSG_INFO_PRINT_LONGEST            _UxGT("Najdł. druk")
+  #define MSG_INFO_PRINT_FILAMENT           _UxGT("Użyty fil.")
+#else
+  #define MSG_INFO_PRINT_COUNT              _UxGT("Wydrukowano")
+  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Ukończono")
+  #define MSG_INFO_PRINT_TIME               _UxGT("Razem")
+  #define MSG_INFO_PRINT_LONGEST            _UxGT("Najdł. druk")
+  #define MSG_INFO_PRINT_FILAMENT           _UxGT("Użyty fil.")
+#endif
+
+#define MSG_INFO_MIN_TEMP                   _UxGT("Min Temp")
+#define MSG_INFO_MAX_TEMP                   _UxGT("Max Temp")
+#define MSG_INFO_PSU                        _UxGT("Zasilacz")
+
+#define MSG_DRIVE_STRENGTH                  _UxGT("Siła silnika")
+#define MSG_DAC_PERCENT                     _UxGT("Siła %")
+#define MSG_DAC_EEPROM_WRITE                _UxGT("Zapisz DAC EEPROM")
+
+#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("ZMIEŃ FILAMENT")
+#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("ZMIEŃ OPCJE:")
+#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Ekstruduj więcej")
+#define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Wznów drukowanie")
+
+#if LCD_HEIGHT >= 4
+  // Up to 3 lines allowed
+  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Czekam na ")
+  #define MSG_FILAMENT_CHANGE_INIT_2          _UxGT("zmianę filamentu")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Czekam na")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_2        _UxGT("wyjęcie filamentu")
+  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Włóz filament")
+  #define MSG_FILAMENT_CHANGE_INSERT_2        _UxGT("i naciśnij przycisk")
+  #define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("aby kontynuować...")
+  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Czekam na")
+  #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("włożenie filamentu")
+  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Czekam na")
+  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("ekstruzję filamentu")
+  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Czekam na")
+  #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("wznowienie druku")
+#else // LCD_HEIGHT < 4
+  // Up to 2 lines allowed
+  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Proszę czekać...")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Wysuwanie...")
+  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Włóż i naciśnij prz.")
+  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Ładowanie...")
+  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Ekstruzja...")
+  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Wznowienie...")
+#endif // LCD_HEIGHT < 4

Marlin/language_pl-HD44780.h

+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Polish for HD44780 display - no accented characters
+ */
+
+#define WELCOME_MSG                         MACHINE_NAME _UxGT(" gotowy.")
+#define MSG_SD_INSERTED                     _UxGT("Karta wlozona")
+#define MSG_SD_REMOVED                      _UxGT("Karta usunieta")
+#define MSG_LCD_ENDSTOPS                    _UxGT("Krancow.") // Max length 8 characters
+#define MSG_MAIN                            _UxGT("Menu glowne")
+#define MSG_AUTOSTART                       _UxGT("Autostart")
+#define MSG_DISABLE_STEPPERS                _UxGT("Wylacz silniki")
+#define MSG_AUTO_HOME                       _UxGT("Pozycja zerowa")
+#define MSG_AUTO_HOME_X                     _UxGT("Zeruj X")
+#define MSG_AUTO_HOME_Y                     _UxGT("Zeruj Y")
+#define MSG_AUTO_HOME_Z                     _UxGT("Zeruj Z")
+#define MSG_LEVEL_BED                       _UxGT("Poziom. stolu")
+#define MSG_LEVEL_BED_HOMING                _UxGT("Pozycja zerowa")
+#define MSG_LEVEL_BED_WAITING               _UxGT("Kliknij by rozp.")
+#define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Nastepny punkt")
+#define MSG_LEVEL_BED_DONE                  _UxGT("Wypoziomowano!")
+#define MSG_SET_HOME_OFFSETS                _UxGT("Ust. poz. zer.")
+#define MSG_HOME_OFFSETS_APPLIED            _UxGT("Poz. zerowa ust.")
+#define MSG_SET_ORIGIN                      _UxGT("Ustaw punkt zero")
+#define MSG_PREHEAT_1                       _UxGT("Rozgrzej PLA")
+#define MSG_PREHEAT_1_N                     MSG_PREHEAT_1 _UxGT(" ")
+#define MSG_PREHEAT_1_ALL                   MSG_PREHEAT_1 _UxGT(" wsz.")
+#define MSG_PREHEAT_1_BEDONLY               _UxGT("Rozgrzej stol PLA")
+#define MSG_PREHEAT_1_SETTINGS              _UxGT("Ustaw. rozg. PLA")
+#define MSG_PREHEAT_2                       _UxGT("Rozgrzej ABS")
+#define MSG_PREHEAT_2_N                     MSG_PREHEAT_2 _UxGT(" ")
+#define MSG_PREHEAT_2_ALL                   MSG_PREHEAT_2 _UxGT(" wsz.")
+#define MSG_PREHEAT_2_BEDONLY               _UxGT("Rozgrzej stol ABS")
+#define MSG_PREHEAT_2_SETTINGS              _UxGT("Ustaw. rozg. ABS")
+#define MSG_COOLDOWN                        _UxGT("Chlodzenie")
+#define MSG_SWITCH_PS_ON                    _UxGT("Wlacz zasilacz")
+#define MSG_SWITCH_PS_OFF                   _UxGT("Wylacz zasilacz")
+#define MSG_EXTRUDE                         _UxGT("Ekstruzja")
+#define MSG_RETRACT                         _UxGT("Wycofanie")
+#define MSG_MOVE_AXIS                       _UxGT("Ruch osi")
+#define MSG_BED_LEVELING                    _UxGT("Poziom. stolu")
+#define MSG_MOVE_X                          _UxGT("Przesun w X")
+#define MSG_MOVE_Y                          _UxGT("Przesun w Y")
+#define MSG_MOVE_Z                          _UxGT("Przesun w Z")
+#define MSG_MOVE_E                          _UxGT("Ekstruzja (os E)")
+#define MSG_MOVE_01MM                       _UxGT("Przesun co .1mm")
+#define MSG_MOVE_1MM                        _UxGT("Przesun co 1mm")
+#define MSG_MOVE_10MM                       _UxGT("Przesun co 10mm")
+#define MSG_SPEED                           _UxGT("Predkosc")
+#define MSG_BED_Z                           _UxGT("Stol Z")
+#define MSG_NOZZLE                          _UxGT("Dysza")
+#define MSG_BED                             _UxGT("Stol")
+#define MSG_FAN_SPEED                       _UxGT("Obroty wiatraka")
+#define MSG_FLOW                            _UxGT("Przeplyw")
+#define MSG_CONTROL                         _UxGT("Ustawienia")
+#define MSG_MIN                             LCD_STR_THERMOMETER _UxGT(" Min")
+#define MSG_MAX                             LCD_STR_THERMOMETER _UxGT(" Max")
+#define MSG_FACTOR                          LCD_STR_THERMOMETER _UxGT(" Mnoznik")
+#define MSG_AUTOTEMP                        _UxGT("Auto. temperatura")
+#define MSG_ON                              _UxGT("Wl. ")
+#define MSG_OFF                             _UxGT("Wyl.")
+#define MSG_PID_P                           _UxGT("PID-P")
+#define MSG_PID_I                           _UxGT("PID-I")
+#define MSG_PID_D                           _UxGT("PID-D")
+#define MSG_PID_C                           _UxGT("PID-C")
+#define MSG_SELECT                          _UxGT("Select")
+#define MSG_ACC                             _UxGT("Przyspieszenie")
+#define MSG_JERK                            _UxGT("Zryw")
+#define MSG_VX_JERK                         _UxGT("Zryw Vx")
+#define MSG_VY_JERK                         _UxGT("Zryw Vy")
+#define MSG_VZ_JERK                         _UxGT("Zryw Vz")
+#define MSG_VE_JERK                         _UxGT("Zryw Ve")
+#define MSG_VMAX                            _UxGT("Vmax ")
+#define MSG_VMIN                            _UxGT("Vmin")
+#define MSG_VTRAV_MIN                       _UxGT("Vskok min")
+#define MSG_ACCELERATION                    MSG_ACC
+#define MSG_AMAX                            _UxGT("Amax")
+#define MSG_A_RETRACT                       _UxGT("A-wycofanie")
+#define MSG_A_TRAVEL                        _UxGT("A-przesun.")
+#define MSG_STEPS_PER_MM                    _UxGT("kroki/mm")
+#define MSG_XSTEPS                          _UxGT("krokiX/mm")
+#define MSG_YSTEPS                          _UxGT("krokiY/mm")
+#define MSG_ZSTEPS                          _UxGT("krokiZ/mm")
+#define MSG_ESTEPS                          _UxGT("krokiE/mm")
+#define MSG_E1STEPS                         _UxGT("krokiE1/mm")
+#define MSG_E2STEPS                         _UxGT("krokiE2/mm")
+#define MSG_E3STEPS                         _UxGT("krokiE3/mm")
+#define MSG_E4STEPS                         _UxGT("krokiE4/mm")
+#define MSG_E5STEPS                         _UxGT("krokiE5/mm")
+#define MSG_TEMPERATURE                     _UxGT("Temperatura")
+#define MSG_MOTION                          _UxGT("Ruch")
+#define MSG_FILAMENT                        _UxGT("Filament")
+#define MSG_VOLUMETRIC_ENABLED              _UxGT("E w mm3")
+#define MSG_FILAMENT_DIAM                   _UxGT("Sr. fil.")
+#define MSG_CONTRAST                        _UxGT("Kontrast LCD")
+#define MSG_STORE_EEPROM                    _UxGT("Zapisz w pamieci")
+#define MSG_LOAD_EEPROM                     _UxGT("Wczytaj z pamieci")
+#define MSG_RESTORE_FAILSAFE                _UxGT("Ustaw. fabryczne")
+#define MSG_REFRESH                         _UxGT("Odswiez")
+#define MSG_WATCH                           _UxGT("Ekran glowny")
+#define MSG_PREPARE                         _UxGT("Przygotuj")
+#define MSG_TUNE                            _UxGT("Strojenie")
+#define MSG_PAUSE_PRINT                     _UxGT("Pauza")
+#define MSG_RESUME_PRINT                    _UxGT("Wznowienie")
+#define MSG_STOP_PRINT                      _UxGT("Stop")
+#define MSG_CARD_MENU                       _UxGT("Karta SD")
+#define MSG_NO_CARD                         _UxGT("Brak karty")
+#define MSG_DWELL                           _UxGT("Uspij...")
+#define MSG_USERWAIT                        _UxGT("Oczekiwanie...")
+#define MSG_RESUMING                        _UxGT("Wznawianie druku")
+#define MSG_PRINT_ABORTED                   _UxGT("Druk przerwany")
+#define MSG_NO_MOVE                         _UxGT("Brak ruchu")
+#define MSG_KILLED                          _UxGT("Ubity. ")
+#define MSG_STOPPED                         _UxGT("Zatrzymany. ")
+#define MSG_CONTROL_RETRACT                 _UxGT("Wycofaj mm")
+#define MSG_CONTROL_RETRACT_SWAP            _UxGT("Z Wycof. mm")
+#define MSG_CONTROL_RETRACTF                _UxGT("Wycofaj  V")
+#define MSG_CONTROL_RETRACT_ZLIFT           _UxGT("Skok Z mm")
+#define MSG_CONTROL_RETRACT_RECOVER         _UxGT("Cof. wycof. mm")
+#define MSG_CONTROL_RETRACT_RECOVER_SWAP    _UxGT("Z Cof. wyc. mm")
+#define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("Cof. wycof.  V")
+#define MSG_AUTORETRACT                     _UxGT("Auto. wycofanie")
+#define MSG_FILAMENTCHANGE                  _UxGT("Zmien filament")
+#define MSG_INIT_SDCARD                     _UxGT("Inicjal. karty SD")
+#define MSG_CNG_SDCARD                      _UxGT("Zmiana karty SD")
+#define MSG_ZPROBE_OUT                      _UxGT("Sonda Z za stolem")
+#define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Self-Test")
+#define MSG_BLTOUCH_RESET                   _UxGT("Reset BLTouch")
+#define MSG_HOME                            _UxGT("Home")  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           _UxGT("first")
+#define MSG_ZPROBE_ZOFFSET                  _UxGT("Offset Z")
+#define MSG_BABYSTEP_X                      _UxGT("Babystep X")
+#define MSG_BABYSTEP_Y                      _UxGT("Babystep Y")
+#define MSG_BABYSTEP_Z                      _UxGT("Babystep Z")
+#define MSG_ENDSTOP_ABORT                   _UxGT("Blad krancowki")
+#define MSG_HEATING_FAILED_LCD              _UxGT("Rozgrz. nieudane")
+#define MSG_ERR_REDUNDANT_TEMP              _UxGT("Blad temperatury")
+#define MSG_THERMAL_RUNAWAY                 _UxGT("Zanik temp.")
+#define MSG_ERR_MAXTEMP                     _UxGT("Err max temp")
+#define MSG_ERR_MINTEMP                     _UxGT("Err min temp")
+#define MSG_ERR_MAXTEMP_BED                 _UxGT("Err max temp stolu")
+#define MSG_ERR_MINTEMP_BED                 _UxGT("Err min temp stolu")
+#define MSG_ERR_Z_HOMING                    _UxGT("G28 Z Forbidden")
+#define MSG_HALTED                          _UxGT("Drukarka zatrzym.")
+#define MSG_PLEASE_RESET                    _UxGT("Prosze zresetowac")
+#define MSG_SHORT_DAY                       _UxGT("d") // One character only
+#define MSG_SHORT_HOUR                      _UxGT("g") // One character only
+#define MSG_SHORT_MINUTE                    _UxGT("m") // One character only
+#define MSG_HEATING                         _UxGT("Rozgrzewanie...")
+#define MSG_HEATING_COMPLETE                _UxGT("Rozgrzano")
+#define MSG_BED_HEATING                     _UxGT("Rozgrzewanie stolu...")
+#define MSG_BED_DONE                        _UxGT("Rozgrzano stol")
+#define MSG_DELTA_CALIBRATE                 _UxGT("Kalibrowanie Delty")
+#define MSG_DELTA_CALIBRATE_X               _UxGT("Kalibruj X")
+#define MSG_DELTA_CALIBRATE_Y               _UxGT("Kalibruj Y")
+#define MSG_DELTA_CALIBRATE_Z               _UxGT("Kalibruj Z")
+#define MSG_DELTA_CALIBRATE_CENTER          _UxGT("Kalibruj srodek")
+
+#define MSG_INFO_MENU                       _UxGT("O drukarce")
+#define MSG_INFO_PRINTER_MENU               _UxGT("Info drukarki")
+#define MSG_INFO_STATS_MENU                 _UxGT("Statystyki")
+#define MSG_INFO_BOARD_MENU                 _UxGT("Board Info")
+#define MSG_INFO_THERMISTOR_MENU            _UxGT("Thermistory")
+#define MSG_INFO_EXTRUDERS                  _UxGT("Ekstrudery")
+#define MSG_INFO_BAUDRATE                   _UxGT("Predkosc USB")
+#define MSG_INFO_PROTOCOL                   _UxGT("Protokol")
+#define MSG_CASE_LIGHT                      _UxGT("Oswietlenie")
+
+#if LCD_WIDTH >= 20
+  #define MSG_INFO_PRINT_COUNT              _UxGT("Wydrukowano")
+  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Ukonczono")
+  #define MSG_INFO_PRINT_TIME               _UxGT("Czas druku")
+  #define MSG_INFO_PRINT_LONGEST            _UxGT("Najdl. druk")
+  #define MSG_INFO_PRINT_FILAMENT           _UxGT("Uzyty fil.")
+#else
+  #define MSG_INFO_PRINT_COUNT              _UxGT("Wydrukowano")
+  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Ukonczono")
+  #define MSG_INFO_PRINT_TIME               _UxGT("Razem")
+  #define MSG_INFO_PRINT_LONGEST            _UxGT("Najdl. druk")
+  #define MSG_INFO_PRINT_FILAMENT           _UxGT("Uzyty fil.")
+#endif
+
+#define MSG_INFO_MIN_TEMP                   _UxGT("Min Temp")
+#define MSG_INFO_MAX_TEMP                   _UxGT("Max Temp")
+#define MSG_INFO_PSU                        _UxGT("Zasilacz")
+
+#define MSG_DRIVE_STRENGTH                  _UxGT("Sila silnika")
+#define MSG_DAC_PERCENT                     _UxGT("Sila %")
+#define MSG_DAC_EEPROM_WRITE                _UxGT("Zapisz DAC EEPROM")
+
+#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("ZMIEN FILAMENT")
+#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("ZMIEN OPCJE:")
+#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Ekstruduj wiecej")
+#define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Wznow drukowanie")
+
+#if LCD_HEIGHT >= 4
+  // Up to 3 lines allowed
+  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Czekam na ")
+  #define MSG_FILAMENT_CHANGE_INIT_2          _UxGT("zmiane filamentu")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Czekam na")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_2        _UxGT("wyjecie filamentu")
+  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Wloz filament")
+  #define MSG_FILAMENT_CHANGE_INSERT_2        _UxGT("i nacisnij przycisk")
+  #define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("aby kontynuowac...")
+  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Czekam na")
+  #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("wlozenie filamentu")
+  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Czekam na")
+  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("ekstruzje filamentu")
+  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Czekam na")
+  #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("wznowienie druku")
+#else // LCD_HEIGHT < 4
+  // Up to 2 lines allowed
+  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Prosze czekac...")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Wysuwanie...")
+  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Wloz i nacisnij prz.")
+  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Ladowanie...")
+  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Ekstruzja...")
+  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Wznowienie...")
+#endif // LCD_HEIGHT < 4
+
+#if LCD_HEIGHT >= 4
+  // Up to 3 lines allowed
+  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Czekam na ")
+  #define MSG_FILAMENT_CHANGE_INIT_2          _UxGT("zmiane filamentu")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Czekam na")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_2        _UxGT("wyjecie filamentu")
+  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Wloz filament")
+  #define MSG_FILAMENT_CHANGE_INSERT_2        _UxGT("i nacisnij przycisk")
+  #define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("aby kontynuowac...")
+  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Czekam na")
+  #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("wlozenie filamentu")
+  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Czekam na")
+  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("ekstruzje filamentu")
+  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Czekam na")
+  #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("wznowienie druku")
+#else // LCD_HEIGHT < 4
+  // Up to 2 lines allowed
+  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Prosze czekac...")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Wysuwanie...")
+  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Wloz i nacisnij prz.")
+  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Ladowanie...")
+  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Ekstruzja...")
+  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Wznowienie...")
+#endif // LCD_HEIGHT < 4

Marlin/language_pl.h

 #define DISPLAY_CHARSET_ISO10646_PL
 #define MAPPER_C3C4C5_PL
 
+/**
+ * One version with accented characters and one without
+ */
 #if ENABLED(DOGLCD)
-
-#define WELCOME_MSG                         MACHINE_NAME _UxGT(" gotowy.")
-#define MSG_SD_INSERTED                     _UxGT("Karta włożona")
-#define MSG_SD_REMOVED                      _UxGT("Karta usunięta")
-#define MSG_LCD_ENDSTOPS                    _UxGT("Kranców.") // Max length 8 characters
-#define MSG_MAIN                            _UxGT("Menu główne")
-#define MSG_AUTOSTART                       _UxGT("Autostart")
-#define MSG_DISABLE_STEPPERS                _UxGT("Wyłącz silniki")
-#define MSG_AUTO_HOME                       _UxGT("Pozycja zerowa")
-#define MSG_AUTO_HOME_X                     _UxGT("Zeruj X")
-#define MSG_AUTO_HOME_Y                     _UxGT("Zeruj Y")
-#define MSG_AUTO_HOME_Z                     _UxGT("Zeruj Z")
-#define MSG_LEVEL_BED_HOMING                _UxGT("Pozycja zerowa")
-#define MSG_LEVEL_BED_WAITING               _UxGT("Kliknij by rozp.")
-#define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Następny punkt")
-#define MSG_LEVEL_BED_DONE                  _UxGT("Wypoziomowano!")
-#define MSG_SET_HOME_OFFSETS                _UxGT("Ust. poz. zer.")
-#define MSG_HOME_OFFSETS_APPLIED            _UxGT("Poz. zerowa ust.")
-#define MSG_SET_ORIGIN                      _UxGT("Ustaw punkt zero")
-#define MSG_PREHEAT_1                       _UxGT("Rozgrzej PLA")
-#define MSG_PREHEAT_1_N                     MSG_PREHEAT_1 _UxGT(" ")
-#define MSG_PREHEAT_1_ALL                   MSG_PREHEAT_1 _UxGT(" wsz.")
-#define MSG_PREHEAT_1_BEDONLY               _UxGT("Rozgrzej stół PLA")
-#define MSG_PREHEAT_1_SETTINGS              _UxGT("Ustaw. rozg. PLA")
-#define MSG_PREHEAT_2                       _UxGT("Rozgrzej ABS")
-#define MSG_PREHEAT_2_N                     MSG_PREHEAT_2 _UxGT(" ")
-#define MSG_PREHEAT_2_ALL                   MSG_PREHEAT_2 _UxGT(" wsz.")
-#define MSG_PREHEAT_2_BEDONLY               _UxGT("Rozgrzej stół ABS")
-#define MSG_PREHEAT_2_SETTINGS              _UxGT("Ustaw. rozg. ABS")
-#define MSG_COOLDOWN                        _UxGT("Chłodzenie")
-#define MSG_SWITCH_PS_ON                    _UxGT("Włącz zasilacz")
-#define MSG_SWITCH_PS_OFF                   _UxGT("Wyłącz zasilacz")
-#define MSG_EXTRUDE                         _UxGT("Ekstruzja")
-#define MSG_RETRACT                         _UxGT("Wycofanie")
-#define MSG_MOVE_AXIS                       _UxGT("Ruch osi")
-#define MSG_BED_LEVELING                    _UxGT("Poziom. stołu")
-#define MSG_LEVEL_BED                       _UxGT("Poziom. stołu")
-#define MSG_MOVE_X                          _UxGT("Przesuń w X")
-#define MSG_MOVE_Y                          _UxGT("Przesuń w Y")
-#define MSG_MOVE_Z                          _UxGT("Przesuń w Z")
-#define MSG_MOVE_E                          _UxGT("Ekstruzja (os E)")
-#define MSG_MOVE_01MM                       _UxGT("Przesuń co .1mm")
-#define MSG_MOVE_1MM                        _UxGT("Przesuń co 1mm")
-#define MSG_MOVE_10MM                       _UxGT("Przesuń co 10mm")
-#define MSG_SPEED                           _UxGT("Predkość")
-#define MSG_BED_Z                           _UxGT("Stół Z")
-#define MSG_NOZZLE                          _UxGT("Dysza")
-#define MSG_BED                             _UxGT("Stół")
-#define MSG_FAN_SPEED                       _UxGT("Obroty wiatraka")
-#define MSG_FLOW                            _UxGT("Przepływ")
-#define MSG_CONTROL                         _UxGT("Ustawienia")
-#define MSG_MIN                             LCD_STR_THERMOMETER _UxGT(" Min")
-#define MSG_MAX                             LCD_STR_THERMOMETER _UxGT(" Max")
-#define MSG_FACTOR                          LCD_STR_THERMOMETER _UxGT(" Mnożnik")
-#define MSG_AUTOTEMP                        _UxGT("Auto. temperatura")
-#define MSG_ON                              _UxGT("Wł. ")
-#define MSG_OFF                             _UxGT("Wył.")
-#define MSG_PID_P                           _UxGT("PID-P")
-#define MSG_PID_I                           _UxGT("PID-I")
-#define MSG_PID_D                           _UxGT("PID-D")
-#define MSG_PID_C                           _UxGT("PID-C")
-#define MSG_SELECT                          _UxGT("Select")
-#define MSG_ACC                             _UxGT("Przyśpieszenie")
-#define MSG_JERK                            _UxGT("Zryw")
-#define MSG_VX_JERK                         _UxGT("Zryw Vx")
-#define MSG_VY_JERK                         _UxGT("Zryw Vy")
-#define MSG_VZ_JERK                         _UxGT("Zryw Vz")
-#define MSG_VE_JERK                         _UxGT("Zryw Ve")
-#define MSG_VMAX                            _UxGT("Vmax ")
-#define MSG_VMIN                            _UxGT("Vmin")
-#define MSG_VTRAV_MIN                       _UxGT("Vskok min")
-#define MSG_ACCELERATION                    MSG_ACC
-#define MSG_AMAX                            _UxGT("Amax")
-#define MSG_A_RETRACT                       _UxGT("A-wycofanie")
-#define MSG_A_TRAVEL                        _UxGT("A-przesuń.")
-#define MSG_STEPS_PER_MM                    _UxGT("kroki/mm")
-#define MSG_XSTEPS                          _UxGT("krokiX/mm")
-#define MSG_YSTEPS                          _UxGT("krokiY/mm")
-#define MSG_ZSTEPS                          _UxGT("krokiZ/mm")
-#define MSG_ESTEPS                          _UxGT("krokiE/mm")
-#define MSG_E1STEPS                         _UxGT("krokiE1/mm")
-#define MSG_E2STEPS                         _UxGT("krokiE2/mm")
-#define MSG_E3STEPS                         _UxGT("krokiE3/mm")
-#define MSG_E4STEPS                         _UxGT("krokiE4/mm")
-#define MSG_E5STEPS                         _UxGT("krokiE5/mm")
-#define MSG_TEMPERATURE                     _UxGT("Temperatura")
-#define MSG_MOTION                          _UxGT("Ruch")
-#define MSG_FILAMENT                        _UxGT("Filament")
-#define MSG_VOLUMETRIC_ENABLED              _UxGT("E w mm3")
-#define MSG_FILAMENT_DIAM                   _UxGT("Śr. fil.")
-#define MSG_CONTRAST                        _UxGT("Kontrast LCD")
-#define MSG_STORE_EEPROM                    _UxGT("Zapisz w pamięci")
-#define MSG_LOAD_EEPROM                     _UxGT("Wczytaj z pamięci")
-#define MSG_RESTORE_FAILSAFE                _UxGT("Ustaw. fabryczne")
-#define MSG_REFRESH                         _UxGT("Odswież")
-#define MSG_WATCH                           _UxGT("Ekran główny")
-#define MSG_PREPARE                         _UxGT("Przygotuj")
-#define MSG_TUNE                            _UxGT("Strojenie")
-#define MSG_PAUSE_PRINT                     _UxGT("Pauza")
-#define MSG_RESUME_PRINT                    _UxGT("Wznowienie")
-#define MSG_STOP_PRINT                      _UxGT("Stop")
-#define MSG_CARD_MENU                       _UxGT("Karta SD")
-#define MSG_NO_CARD                         _UxGT("Brak karty")
-#define MSG_DWELL                           _UxGT("Uśpij...")
-#define MSG_USERWAIT                        _UxGT("Oczekiwanie...")
-#define MSG_RESUMING                        _UxGT("Wznawianie druku")
-#define MSG_PRINT_ABORTED                   _UxGT("Druk przerwany")
-#define MSG_NO_MOVE                         _UxGT("Brak ruchu")
-#define MSG_KILLED                          _UxGT("Ubity. ")
-#define MSG_STOPPED                         _UxGT("Zatrzymany. ")
-#define MSG_CONTROL_RETRACT                 _UxGT("Wycofaj mm")
-#define MSG_CONTROL_RETRACT_SWAP            _UxGT("Z Wycof. mm")
-#define MSG_CONTROL_RETRACTF                _UxGT("Wycofaj  V")
-#define MSG_CONTROL_RETRACT_ZLIFT           _UxGT("Skok Z mm")
-#define MSG_CONTROL_RETRACT_RECOVER         _UxGT("Cof. wycof. mm")
-#define MSG_CONTROL_RETRACT_RECOVER_SWAP    _UxGT("Z Cof. wyc. mm")
-#define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("Cof. wycof.  V")
-#define MSG_AUTORETRACT                     _UxGT("Auto. wycofanie")
-#define MSG_FILAMENTCHANGE                  _UxGT("Zmień filament")
-#define MSG_INIT_SDCARD                     _UxGT("Inicjal. karty SD")
-#define MSG_CNG_SDCARD                      _UxGT("Zmiana karty SD")
-#define MSG_ZPROBE_OUT                      _UxGT("Sonda Z za stołem")
-#define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Self-Test")
-#define MSG_BLTOUCH_RESET                   _UxGT("Reset BLTouch")
-#define MSG_HOME                            _UxGT("Home")  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
-#define MSG_FIRST                           _UxGT("first")
-#define MSG_ZPROBE_ZOFFSET                  _UxGT("Offset Z")
-#define MSG_BABYSTEP_X                      _UxGT("Babystep X")
-#define MSG_BABYSTEP_Y                      _UxGT("Babystep Y")
-#define MSG_BABYSTEP_Z                      _UxGT("Babystep Z")
-#define MSG_ENDSTOP_ABORT                   _UxGT("Błąd krańcówki")
-#define MSG_HEATING_FAILED_LCD              _UxGT("Rozgrz. nieudane")
-#define MSG_ERR_REDUNDANT_TEMP              _UxGT("Błąd temperatury")
-#define MSG_THERMAL_RUNAWAY                 _UxGT("Zanik temp.")
-#define MSG_ERR_MAXTEMP                     _UxGT("Err max temp")
-#define MSG_ERR_MINTEMP                     _UxGT("Err min temp")
-#define MSG_ERR_MAXTEMP_BED                 _UxGT("Err max temp stołu")
-#define MSG_ERR_MINTEMP_BED                 _UxGT("Err min temp stołu")
-#define MSG_ERR_Z_HOMING                    _UxGT("G28 Z Forbidden")
-#define MSG_HALTED                          _UxGT("Drukarka zatrzym.")
-#define MSG_PLEASE_RESET                    _UxGT("Proszę zresetować")
-#define MSG_SHORT_DAY                       _UxGT("d") // One character only
-#define MSG_SHORT_HOUR                      _UxGT("g") // One character only
-#define MSG_SHORT_MINUTE                    _UxGT("m") // One character only
-#define MSG_HEATING                         _UxGT("Rozgrzewanie...")
-#define MSG_HEATING_COMPLETE                _UxGT("Rozgrzano")
-#define MSG_BED_HEATING                     _UxGT("Rozgrzewanie stołu...")
-#define MSG_BED_DONE                        _UxGT("Rozgrzano stół")
-#define MSG_DELTA_CALIBRATE                 _UxGT("Kalibrowanie Delty")
-#define MSG_DELTA_CALIBRATE_X               _UxGT("Kalibruj X")
-#define MSG_DELTA_CALIBRATE_Y               _UxGT("Kalibruj Y")
-#define MSG_DELTA_CALIBRATE_Z               _UxGT("Kalibruj Z")
-#define MSG_DELTA_CALIBRATE_CENTER          _UxGT("Kalibruj środek")
-
-#define MSG_INFO_MENU                       _UxGT("O drukarce")
-#define MSG_INFO_PRINTER_MENU               _UxGT("Info drukarki")
-#define MSG_INFO_STATS_MENU                 _UxGT("Statystyki")
-#define MSG_INFO_BOARD_MENU                 _UxGT("Board Info")
-#define MSG_INFO_THERMISTOR_MENU            _UxGT("Thermistory")
-#define MSG_INFO_EXTRUDERS                  _UxGT("Ekstrudery")
-#define MSG_INFO_BAUDRATE                   _UxGT("Predkość USB")
-#define MSG_INFO_PROTOCOL                   _UxGT("Protokół")
-#define MSG_LIGHTS_ON                       _UxGT("Oświetlenie wl.")
-#define MSG_LIGHTS_OFF                      _UxGT("Oświetlenie wyl.")
-
-#if LCD_WIDTH >= 20
-  #define MSG_INFO_PRINT_COUNT              _UxGT("Wydrukowano")
-  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Ukończono")
-  #define MSG_INFO_PRINT_TIME               _UxGT("Czas druku")
-  #define MSG_INFO_PRINT_LONGEST            _UxGT("Najdł. druk")
-  #define MSG_INFO_PRINT_FILAMENT           _UxGT("Użyty fil.")
-#else
-  #define MSG_INFO_PRINT_COUNT              _UxGT("Wydrukowano")
-  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Ukończono")
-  #define MSG_INFO_PRINT_TIME               _UxGT("Razem")
-  #define MSG_INFO_PRINT_LONGEST            _UxGT("Najdł. druk")
-  #define MSG_INFO_PRINT_FILAMENT           _UxGT("Użyty fil.")
-#endif
-
-#define MSG_INFO_MIN_TEMP                   _UxGT("Min Temp")
-#define MSG_INFO_MAX_TEMP                   _UxGT("Max Temp")
-#define MSG_INFO_PSU                        _UxGT("Zasilacz")
-
-#define MSG_DRIVE_STRENGTH                  _UxGT("Siła silnika")
-#define MSG_DAC_PERCENT                     _UxGT("Siła %")
-#define MSG_DAC_EEPROM_WRITE                _UxGT("Zapisz DAC EEPROM")
-
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("ZMIEŃ FILAMENT")
-#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("ZMIEŃ OPCJE:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Ekstruduj więcej")
-#define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Wznów drukowanie")
-
-#if LCD_HEIGHT >= 4
-  // Up to 3 lines allowed
-  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Czekam na ")
-  #define MSG_FILAMENT_CHANGE_INIT_2          _UxGT("zmianę filamentu")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Czekam na")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_2        _UxGT("wyjęcie filamentu")
-  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Włóz filament")
-  #define MSG_FILAMENT_CHANGE_INSERT_2        _UxGT("i naciśnij przycisk")
-  #define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("aby kontynuować...")
-  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Czekam na")
-  #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("włożenie filamentu")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Czekam na")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("ekstruzję filamentu")
-  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Czekam na")
-  #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("wznowienie druku")
-#else // LCD_HEIGHT < 4
-  // Up to 2 lines allowed
-  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Proszę czekać...")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Wysuwanie...")
-  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Włóż i naciśnij prz.")
-  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Ładowanie...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Ekstruzja...")
-  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Wznowienie...")
-#endif // LCD_HEIGHT < 4
-
- #else
-
-#define WELCOME_MSG                         MACHINE_NAME _UxGT(" gotowy.")
-#define MSG_SD_INSERTED                     _UxGT("Karta wlozona")
-#define MSG_SD_REMOVED                      _UxGT("Karta usunieta")
-#define MSG_LCD_ENDSTOPS                    _UxGT("Krancow.") // Max length 8 characters
-#define MSG_MAIN                            _UxGT("Menu glowne")
-#define MSG_AUTOSTART                       _UxGT("Autostart")
-#define MSG_DISABLE_STEPPERS                _UxGT("Wylacz silniki")
-#define MSG_AUTO_HOME                       _UxGT("Pozycja zerowa")
-#define MSG_AUTO_HOME_X                     _UxGT("Zeruj X")
-#define MSG_AUTO_HOME_Y                     _UxGT("Zeruj Y")
-#define MSG_AUTO_HOME_Z                     _UxGT("Zeruj Z")
-#define MSG_LEVEL_BED_HOMING                _UxGT("Pozycja zerowa")
-#define MSG_LEVEL_BED_WAITING               _UxGT("Kliknij by rozp.")
-#define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Nastepny punkt")
-#define MSG_LEVEL_BED_DONE                  _UxGT("Wypoziomowano!")
-#define MSG_SET_HOME_OFFSETS                _UxGT("Ust. poz. zer.")
-#define MSG_HOME_OFFSETS_APPLIED            _UxGT("Poz. zerowa ust.")
-#define MSG_SET_ORIGIN                      _UxGT("Ustaw punkt zero")
-#define MSG_PREHEAT_1                       _UxGT("Rozgrzej PLA")
-#define MSG_PREHEAT_1_N                     MSG_PREHEAT_1 _UxGT(" ")
-#define MSG_PREHEAT_1_ALL                   MSG_PREHEAT_1 _UxGT(" wsz.")
-#define MSG_PREHEAT_1_BEDONLY               _UxGT("Rozgrzej stol PLA")
-#define MSG_PREHEAT_1_SETTINGS              _UxGT("Ustaw. rozg. PLA")
-#define MSG_PREHEAT_2                       _UxGT("Rozgrzej ABS")
-#define MSG_PREHEAT_2_N                     MSG_PREHEAT_2 _UxGT(" ")
-#define MSG_PREHEAT_2_ALL                   MSG_PREHEAT_2 _UxGT(" wsz.")
-#define MSG_PREHEAT_2_BEDONLY               _UxGT("Rozgrzej stol ABS")
-#define MSG_PREHEAT_2_SETTINGS              _UxGT("Ustaw. rozg. ABS")
-#define MSG_COOLDOWN                        _UxGT("Chlodzenie")
-#define MSG_SWITCH_PS_ON                    _UxGT("Wlacz zasilacz")
-#define MSG_SWITCH_PS_OFF                   _UxGT("Wylacz zasilacz")
-#define MSG_EXTRUDE                         _UxGT("Ekstruzja")
-#define MSG_RETRACT                         _UxGT("Wycofanie")
-#define MSG_MOVE_AXIS                       _UxGT("Ruch osi")
-#define MSG_BED_LEVELING                    _UxGT("Poziom. stolu")
-#define MSG_LEVEL_BED                       _UxGT("Poziom. stolu")
-#define MSG_MOVE_X                          _UxGT("Przesun w X")
-#define MSG_MOVE_Y                          _UxGT("Przesun w Y")
-#define MSG_MOVE_Z                          _UxGT("Przesun w Z")
-#define MSG_MOVE_E                          _UxGT("Ekstruzja (os E)")
-#define MSG_MOVE_01MM                       _UxGT("Przesun co .1mm")
-#define MSG_MOVE_1MM                        _UxGT("Przesun co 1mm")
-#define MSG_MOVE_10MM                       _UxGT("Przesun co 10mm")
-#define MSG_SPEED                           _UxGT("Predkosc")
-#define MSG_BED_Z                           _UxGT("Stol Z")
-#define MSG_NOZZLE                          _UxGT("Dysza")
-#define MSG_BED                             _UxGT("Stol")
-#define MSG_FAN_SPEED                       _UxGT("Obroty wiatraka")
-#define MSG_FLOW                            _UxGT("Przeplyw")
-#define MSG_CONTROL                         _UxGT("Ustawienia")
-#define MSG_MIN                             LCD_STR_THERMOMETER _UxGT(" Min")
-#define MSG_MAX                             LCD_STR_THERMOMETER _UxGT(" Max")
-#define MSG_FACTOR                          LCD_STR_THERMOMETER _UxGT(" Mnoznik")
-#define MSG_AUTOTEMP                        _UxGT("Auto. temperatura")
-#define MSG_ON                              _UxGT("Wl. ")
-#define MSG_OFF                             _UxGT("Wyl.")
-#define MSG_PID_P                           _UxGT("PID-P")
-#define MSG_PID_I                           _UxGT("PID-I")
-#define MSG_PID_D                           _UxGT("PID-D")
-#define MSG_PID_C                           _UxGT("PID-C")
-#define MSG_SELECT                          _UxGT("Select")
-#define MSG_ACC                             _UxGT("Przyspieszenie")
-#define MSG_JERK                            _UxGT("Zryw")
-#define MSG_VX_JERK                         _UxGT("Zryw Vx")
-#define MSG_VY_JERK                         _UxGT("Zryw Vy")
-#define MSG_VZ_JERK                         _UxGT("Zryw Vz")
-#define MSG_VE_JERK                         _UxGT("Zryw Ve")
-#define MSG_VMAX                            _UxGT("Vmax ")
-#define MSG_VMIN                            _UxGT("Vmin")
-#define MSG_VTRAV_MIN                       _UxGT("Vskok min")
-#define MSG_ACCELERATION                    MSG_ACC
-#define MSG_AMAX                            _UxGT("Amax")
-#define MSG_A_RETRACT                       _UxGT("A-wycofanie")
-#define MSG_A_TRAVEL                        _UxGT("A-przesun.")
-#define MSG_STEPS_PER_MM                    _UxGT("kroki/mm")
-#define MSG_XSTEPS                          _UxGT("krokiX/mm")
-#define MSG_YSTEPS                          _UxGT("krokiY/mm")
-#define MSG_ZSTEPS                          _UxGT("krokiZ/mm")
-#define MSG_ESTEPS                          _UxGT("krokiE/mm")
-#define MSG_E1STEPS                         _UxGT("krokiE1/mm")
-#define MSG_E2STEPS                         _UxGT("krokiE2/mm")
-#define MSG_E3STEPS                         _UxGT("krokiE3/mm")
-#define MSG_E4STEPS                         _UxGT("krokiE4/mm")
-#define MSG_E5STEPS                         _UxGT("krokiE5/mm")
-#define MSG_TEMPERATURE                     _UxGT("Temperatura")
-#define MSG_MOTION                          _UxGT("Ruch")
-#define MSG_FILAMENT                        _UxGT("Filament")
-#define MSG_VOLUMETRIC_ENABLED              _UxGT("E w mm3")
-#define MSG_FILAMENT_DIAM                   _UxGT("Sr. fil.")
-#define MSG_CONTRAST                        _UxGT("Kontrast LCD")
-#define MSG_STORE_EEPROM                    _UxGT("Zapisz w pamieci")
-#define MSG_LOAD_EEPROM                     _UxGT("Wczytaj z pamieci")
-#define MSG_RESTORE_FAILSAFE                _UxGT("Ustaw. fabryczne")
-#define MSG_REFRESH                         _UxGT("Odswiez")
-#define MSG_WATCH                           _UxGT("Ekran glowny")
-#define MSG_PREPARE                         _UxGT("Przygotuj")
-#define MSG_TUNE                            _UxGT("Strojenie")
-#define MSG_PAUSE_PRINT                     _UxGT("Pauza")
-#define MSG_RESUME_PRINT                    _UxGT("Wznowienie")
-#define MSG_STOP_PRINT                      _UxGT("Stop")
-#define MSG_CARD_MENU                       _UxGT("Karta SD")
-#define MSG_NO_CARD                         _UxGT("Brak karty")
-#define MSG_DWELL                           _UxGT("Uspij...")
-#define MSG_USERWAIT                        _UxGT("Oczekiwanie...")
-#define MSG_RESUMING                        _UxGT("Wznawianie druku")
-#define MSG_PRINT_ABORTED                   _UxGT("Druk przerwany")
-#define MSG_NO_MOVE                         _UxGT("Brak ruchu")
-#define MSG_KILLED                          _UxGT("Ubity. ")
-#define MSG_STOPPED                         _UxGT("Zatrzymany. ")
-#define MSG_CONTROL_RETRACT                 _UxGT("Wycofaj mm")
-#define MSG_CONTROL_RETRACT_SWAP            _UxGT("Z Wycof. mm")
-#define MSG_CONTROL_RETRACTF                _UxGT("Wycofaj  V")
-#define MSG_CONTROL_RETRACT_ZLIFT           _UxGT("Skok Z mm")
-#define MSG_CONTROL_RETRACT_RECOVER         _UxGT("Cof. wycof. mm")
-#define MSG_CONTROL_RETRACT_RECOVER_SWAP    _UxGT("Z Cof. wyc. mm")
-#define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("Cof. wycof.  V")
-#define MSG_AUTORETRACT                     _UxGT("Auto. wycofanie")
-#define MSG_FILAMENTCHANGE                  _UxGT("Zmien filament")
-#define MSG_INIT_SDCARD                     _UxGT("Inicjal. karty SD")
-#define MSG_CNG_SDCARD                      _UxGT("Zmiana karty SD")
-#define MSG_ZPROBE_OUT                      _UxGT("Sonda Z za stolem")
-#define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Self-Test")
-#define MSG_BLTOUCH_RESET                   _UxGT("Reset BLTouch")
-#define MSG_HOME                            _UxGT("Home")  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
-#define MSG_FIRST                           _UxGT("first")
-#define MSG_ZPROBE_ZOFFSET                  _UxGT("Offset Z")
-#define MSG_BABYSTEP_X                      _UxGT("Babystep X")
-#define MSG_BABYSTEP_Y                      _UxGT("Babystep Y")
-#define MSG_BABYSTEP_Z                      _UxGT("Babystep Z")
-#define MSG_ENDSTOP_ABORT                   _UxGT("Blad krancowki")
-#define MSG_HEATING_FAILED_LCD              _UxGT("Rozgrz. nieudane")
-#define MSG_ERR_REDUNDANT_TEMP              _UxGT("Blad temperatury")
-#define MSG_THERMAL_RUNAWAY                 _UxGT("Zanik temp.")
-#define MSG_ERR_MAXTEMP                     _UxGT("Err max temp")
-#define MSG_ERR_MINTEMP                     _UxGT("Err min temp")
-#define MSG_ERR_MAXTEMP_BED                 _UxGT("Err max temp stolu")
-#define MSG_ERR_MINTEMP_BED                 _UxGT("Err min temp stolu")
-#define MSG_ERR_Z_HOMING                    _UxGT("G28 Z Forbidden")
-#define MSG_HALTED                          _UxGT("Drukarka zatrzym.")
-#define MSG_PLEASE_RESET                    _UxGT("Prosze zresetowac")
-#define MSG_SHORT_DAY                       _UxGT("d") // One character only
-#define MSG_SHORT_HOUR                      _UxGT("g") // One character only
-#define MSG_SHORT_MINUTE                    _UxGT("m") // One character only
-#define MSG_HEATING                         _UxGT("Rozgrzewanie...")
-#define MSG_HEATING_COMPLETE                _UxGT("Rozgrzano")
-#define MSG_BED_HEATING                     _UxGT("Rozgrzewanie stolu...")
-#define MSG_BED_DONE                        _UxGT("Rozgrzano stol")
-#define MSG_DELTA_CALIBRATE                 _UxGT("Kalibrowanie Delty")
-#define MSG_DELTA_CALIBRATE_X               _UxGT("Kalibruj X")
-#define MSG_DELTA_CALIBRATE_Y               _UxGT("Kalibruj Y")
-#define MSG_DELTA_CALIBRATE_Z               _UxGT("Kalibruj Z")
-#define MSG_DELTA_CALIBRATE_CENTER          _UxGT("Kalibruj srodek")
-
-#define MSG_INFO_MENU                       _UxGT("O drukarce")
-#define MSG_INFO_PRINTER_MENU               _UxGT("Info drukarki")
-#define MSG_INFO_STATS_MENU                 _UxGT("Statystyki")
-#define MSG_INFO_BOARD_MENU                 _UxGT("Board Info")
-#define MSG_INFO_THERMISTOR_MENU            _UxGT("Thermistory")
-#define MSG_INFO_EXTRUDERS                  _UxGT("Ekstrudery")
-#define MSG_INFO_BAUDRATE                   _UxGT("Predkosc USB")
-#define MSG_INFO_PROTOCOL                   _UxGT("Protokol")
-#define MSG_LIGHTS_ON                       _UxGT("Oswietlenie wl.")
-#define MSG_LIGHTS_OFF                      _UxGT("Oswietlenie wyl.")
-
-#if LCD_WIDTH >= 20
-  #define MSG_INFO_PRINT_COUNT              _UxGT("Wydrukowano")
-  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Ukonczono")
-  #define MSG_INFO_PRINT_TIME               _UxGT("Czas druku")
-  #define MSG_INFO_PRINT_LONGEST            _UxGT("Najdl. druk")
-  #define MSG_INFO_PRINT_FILAMENT           _UxGT("Uzyty fil.")
+  #include "language_pl-DOGM.h"
 #else
-  #define MSG_INFO_PRINT_COUNT              _UxGT("Wydrukowano")
-  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Ukonczono")
-  #define MSG_INFO_PRINT_TIME               _UxGT("Razem")
-  #define MSG_INFO_PRINT_LONGEST            _UxGT("Najdl. druk")
-  #define MSG_INFO_PRINT_FILAMENT           _UxGT("Uzyty fil.")
-#endif
-
-#define MSG_INFO_MIN_TEMP                   _UxGT("Min Temp")
-#define MSG_INFO_MAX_TEMP                   _UxGT("Max Temp")
-#define MSG_INFO_PSU                        _UxGT("Zasilacz")
-
-#define MSG_DRIVE_STRENGTH                  _UxGT("Sila silnika")
-#define MSG_DAC_PERCENT                     _UxGT("Sila %")
-#define MSG_DAC_EEPROM_WRITE                _UxGT("Zapisz DAC EEPROM")
-
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("PRINT PAUSED")
-#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("RESUME OPTIONS:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Ekstruduj wiecej")
-#define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Wznow drukowanie")
-
-#if LCD_HEIGHT >= 4
-  // Up to 3 lines allowed
-  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Czekam na ")
-  #define MSG_FILAMENT_CHANGE_INIT_2          _UxGT("zmiane filamentu")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Czekam na")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_2        _UxGT("wyjecie filamentu")
-  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Wloz filament")
-  #define MSG_FILAMENT_CHANGE_INSERT_2        _UxGT("i nacisnij przycisk")
-  #define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("aby kontynuowac...")
-  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Czekam na")
-  #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("wlozenie filamentu")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Czekam na")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("ekstruzje filamentu")
-  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Czekam na")
-  #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("wznowienie druku")
-#else // LCD_HEIGHT < 4
-  // Up to 2 lines allowed
-  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Prosze czekac...")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Wysuwanie...")
-  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Wloz i nacisnij prz.")
-  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Ladowanie...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Ekstruzja...")
-  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Wznowienie...")
-#endif // LCD_HEIGHT < 4
+  #include "language_pl-HD44780.h"
 #endif
 
 #endif // LANGUAGE_PL_H

Marlin/language_tr.h

 #define MSG_INFO_EXTRUDERS                  _UxGT("Ekstruderler")                                       // Ekstruderler
 #define MSG_INFO_BAUDRATE                   _UxGT("İletişim Hızı")                                      // İletişim Hızı
 #define MSG_INFO_PROTOCOL                   _UxGT("Protokol")                                           // Protokol
-#define MSG_LIGHTS_ON                       _UxGT("Aydınlatmayı Aç")                                    // Aydınlatmayı Aç
-#define MSG_LIGHTS_OFF                      _UxGT("Aydınlatmayı Kapa")                                  // Aydınlaymayı Kapa
+#define MSG_CASE_LIGHT                      _UxGT("Aydınlatmayı")                                       // Aydınlatmayı Aç
 
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Baskı Sayısı")                                       // Baskı Sayısı

Marlin/language_uk.h

 #define MSG_INFO_EXTRUDERS                  _UxGT("Екструдери")
 #define MSG_INFO_BAUDRATE                   _UxGT("біт/с")
 #define MSG_INFO_PROTOCOL                   _UxGT("Протокол")
-#define MSG_LIGHTS_ON                       _UxGT("Підсвітка увік.")
-#define MSG_LIGHTS_OFF                      _UxGT("Підсвітка вимк.")
+#define MSG_CASE_LIGHT                      _UxGT("Підсвітка")
 
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("К-сть друків")

Marlin/ultralcd.cpp

 
   #endif // SDSUPPORT
 
-  #if ENABLED(MENU_ITEM_CASE_LIGHT)
-
-    extern bool case_light_on;
-    extern void update_case_light();
-
-    void toggle_case_light() {
-      case_light_on ^= true;
-      lcdDrawUpdate = LCDVIEW_KEEP_REDRAWING;
-      update_case_light();
-    }
-
-  #endif // MENU_ITEM_CASE_LIGHT
-
   #if ENABLED(BLTOUCH)
 
     /**
    *
    */
 
+  #if ENABLED(MENU_ITEM_CASE_LIGHT)
+    extern bool case_light_on;
+    extern void update_case_light();
+  #endif
+
   void lcd_main_menu() {
     START_MENU();
     MENU_BACK(MSG_WATCH);
     // Switch case light on/off
     //
     #if ENABLED(MENU_ITEM_CASE_LIGHT)
-      if (case_light_on)
-        MENU_ITEM(function, MSG_LIGHTS_OFF, toggle_case_light);
-      else
-        MENU_ITEM(function, MSG_LIGHTS_ON, toggle_case_light);
+      MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, case_light_on, update_case_light);
     #endif
 
     if (planner.movesplanned() || IS_SD_PRINTING) {