thomas
/
marlin
Volgen 1
Ster 0
Vork 0
Code Kwesties 0 Pull-aanvragen 0 Publicaties 0 Wiki Activiteit
Bladeren bron

Use bed size and inset instead of travel limits to define mesh area\n\nAs proposed in #7435 (#7480)

Frederik Kemner 7 jaren geleden
bovenliggende
6440904c1c
commit
25a11cd485
27 gewijzigde bestanden met toevoegingen van 216 en 216 verwijderingen
Gecombineerde weergave Toon Diff Stats
  1. 8
    8
      Marlin/Configuration_adv.h
  2. 8
    8
      Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
  3. 8
    8
      Marlin/example_configurations/Anet/A6/Configuration_adv.h
  4. 8
    8
      Marlin/example_configurations/Anet/A8/Configuration_adv.h
  5. 8
    8
      Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
  6. 8
    8
      Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
  7. 8
    8
      Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
  8. 8
    8
      Marlin/example_configurations/Cartesio/Configuration_adv.h
  9. 8
    8
      Marlin/example_configurations/Felix/Configuration_adv.h
  10. 8
    8
      Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h
  11. 8
    8
      Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
  12. 8
    8
      Marlin/example_configurations/Malyan/M150/Configuration_adv.h
  13. 8
    8
      Marlin/example_configurations/RigidBot/Configuration_adv.h
  14. 8
    8
      Marlin/example_configurations/SCARA/Configuration_adv.h
  15. 8
    8
      Marlin/example_configurations/TinyBoy2/Configuration_adv.h
  16. 8
    8
      Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
  17. 8
    8
      Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
  18. 8
    8
      Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
  19. 8
    8
      Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
  20. 8
    8
      Marlin/example_configurations/delta/generic/Configuration_adv.h
  21. 8
    8
      Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
  22. 8
    8
      Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
  23. 8
    8
      Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
  24. 8
    8
      Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
  25. 8
    8
      Marlin/example_configurations/makibox/Configuration_adv.h
  26. 8
    8
      Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
  27. 8
    8
      Marlin/example_configurations/wt150/Configuration_adv.h

+ 8
- 8
Marlin/Configuration_adv.h Bestand weergeven

661 
 // Below are the macros that are used to define the borders for the mesh area,
 661 
 // Below are the macros that are used to define the borders for the mesh area,
662 
 // made available here for specialized needs, ie dual extruder setup.
 662 
 // made available here for specialized needs, ie dual extruder setup.
663 
 #if ENABLED(MESH_BED_LEVELING)
 663 
 #if ENABLED(MESH_BED_LEVELING)
664 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 664 
+  #define MESH_MIN_X MESH_INSET
665 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 665 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
666 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_Y MESH_INSET
667 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
669 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 669 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
670 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 670 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
671 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
673
673
674 
   // If this is defined, the currently active mesh will be saved in the
 674 
   // If this is defined, the currently active mesh will be saved in the
675 
   // current slot on M500.
 675 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h Bestand weergeven

661 
 // Below are the macros that are used to define the borders for the mesh area,
 661 
 // Below are the macros that are used to define the borders for the mesh area,
662 
 // made available here for specialized needs, ie dual extruder setup.
 662 
 // made available here for specialized needs, ie dual extruder setup.
663 
 #if ENABLED(MESH_BED_LEVELING)
 663 
 #if ENABLED(MESH_BED_LEVELING)
664 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 664 
+  #define MESH_MIN_X MESH_INSET
665 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 665 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
666 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_Y MESH_INSET
667 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
669 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 669 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
670 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 670 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
671 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
673
673
674 
   // If this is defined, the currently active mesh will be saved in the
 674 
   // If this is defined, the currently active mesh will be saved in the
675 
   // current slot on M500.
 675 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/Anet/A6/Configuration_adv.h Bestand weergeven

661 
 // Below are the macros that are used to define the borders for the mesh area,
 661 
 // Below are the macros that are used to define the borders for the mesh area,
662 
 // made available here for specialized needs, ie dual extruder setup.
 662 
 // made available here for specialized needs, ie dual extruder setup.
663 
 #if ENABLED(MESH_BED_LEVELING)
 663 
 #if ENABLED(MESH_BED_LEVELING)
664 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 664 
+  #define MESH_MIN_X MESH_INSET
665 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 665 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
666 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_Y MESH_INSET
667 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
669 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 669 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
670 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 670 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
671 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
673
673
674 
   // If this is defined, the currently active mesh will be saved in the
 674 
   // If this is defined, the currently active mesh will be saved in the
675 
   // current slot on M500.
 675 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/Anet/A8/Configuration_adv.h Bestand weergeven

661 
 // Below are the macros that are used to define the borders for the mesh area,
 661 
 // Below are the macros that are used to define the borders for the mesh area,
662 
 // made available here for specialized needs, ie dual extruder setup.
 662 
 // made available here for specialized needs, ie dual extruder setup.
663 
 #if ENABLED(MESH_BED_LEVELING)
 663 
 #if ENABLED(MESH_BED_LEVELING)
664 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 664 
+  #define MESH_MIN_X MESH_INSET
665 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 665 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
666 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_Y MESH_INSET
667 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
669 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 669 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
670 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 670 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
671 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
673
673
674 
   // If this is defined, the currently active mesh will be saved in the
 674 
   // If this is defined, the currently active mesh will be saved in the
675 
   // current slot on M500.
 675 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h Bestand weergeven

661 
 // Below are the macros that are used to define the borders for the mesh area,
 661 
 // Below are the macros that are used to define the borders for the mesh area,
662 
 // made available here for specialized needs, ie dual extruder setup.
 662 
 // made available here for specialized needs, ie dual extruder setup.
663 
 #if ENABLED(MESH_BED_LEVELING)
 663 
 #if ENABLED(MESH_BED_LEVELING)
664 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 664 
+  #define MESH_MIN_X MESH_INSET
665 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 665 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
666 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_Y MESH_INSET
667 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
669 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 669 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
670 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 670 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
671 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
673
673
674 
   // If this is defined, the currently active mesh will be saved in the
 674 
   // If this is defined, the currently active mesh will be saved in the
675 
   // current slot on M500.
 675 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h Bestand weergeven

661 
 // Below are the macros that are used to define the borders for the mesh area,
 661 
 // Below are the macros that are used to define the borders for the mesh area,
662 
 // made available here for specialized needs, ie dual extruder setup.
 662 
 // made available here for specialized needs, ie dual extruder setup.
663 
 #if ENABLED(MESH_BED_LEVELING)
 663 
 #if ENABLED(MESH_BED_LEVELING)
664 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 664 
+  #define MESH_MIN_X MESH_INSET
665 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 665 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
666 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_Y MESH_INSET
667 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
669 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 669 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
670 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 670 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
671 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
673
673
674 
   // If this is defined, the currently active mesh will be saved in the
 674 
   // If this is defined, the currently active mesh will be saved in the
675 
   // current slot on M500.
 675 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h Bestand weergeven

661 
 // Below are the macros that are used to define the borders for the mesh area,
 661 
 // Below are the macros that are used to define the borders for the mesh area,
662 
 // made available here for specialized needs, ie dual extruder setup.
 662 
 // made available here for specialized needs, ie dual extruder setup.
663 
 #if ENABLED(MESH_BED_LEVELING)
 663 
 #if ENABLED(MESH_BED_LEVELING)
664 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 664 
+  #define MESH_MIN_X MESH_INSET
665 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 665 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
666 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_Y MESH_INSET
667 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
669 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 669 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
670 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 670 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
671 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
673
673
674 
   // If this is defined, the currently active mesh will be saved in the
 674 
   // If this is defined, the currently active mesh will be saved in the
675 
   // current slot on M500.
 675 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/Cartesio/Configuration_adv.h Bestand weergeven

661 
 // Below are the macros that are used to define the borders for the mesh area,
 661 
 // Below are the macros that are used to define the borders for the mesh area,
662 
 // made available here for specialized needs, ie dual extruder setup.
 662 
 // made available here for specialized needs, ie dual extruder setup.
663 
 #if ENABLED(MESH_BED_LEVELING)
 663 
 #if ENABLED(MESH_BED_LEVELING)
664 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 664 
+  #define MESH_MIN_X MESH_INSET
665 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 665 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
666 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_Y MESH_INSET
667 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
669 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 669 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
670 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 670 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
671 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
673
673
674 
   // If this is defined, the currently active mesh will be saved in the
 674 
   // If this is defined, the currently active mesh will be saved in the
675 
   // current slot on M500.
 675 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/Felix/Configuration_adv.h Bestand weergeven

661 
 // Below are the macros that are used to define the borders for the mesh area,
 661 
 // Below are the macros that are used to define the borders for the mesh area,
662 
 // made available here for specialized needs, ie dual extruder setup.
 662 
 // made available here for specialized needs, ie dual extruder setup.
663 
 #if ENABLED(MESH_BED_LEVELING)
 663 
 #if ENABLED(MESH_BED_LEVELING)
664 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 664 
+  #define MESH_MIN_X MESH_INSET
665 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 665 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
666 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_Y MESH_INSET
667 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
669 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 669 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
670 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 670 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
671 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
673
673
674 
   // If this is defined, the currently active mesh will be saved in the
 674 
   // If this is defined, the currently active mesh will be saved in the
675 
   // current slot on M500.
 675 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h Bestand weergeven

661 
 // Below are the macros that are used to define the borders for the mesh area,
 661 
 // Below are the macros that are used to define the borders for the mesh area,
662 
 // made available here for specialized needs, ie dual extruder setup.
 662 
 // made available here for specialized needs, ie dual extruder setup.
663 
 #if ENABLED(MESH_BED_LEVELING)
 663 
 #if ENABLED(MESH_BED_LEVELING)
664 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 664 
+  #define MESH_MIN_X MESH_INSET
665 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 665 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
666 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_Y MESH_INSET
667 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
669 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 669 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
670 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 670 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
671 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
673
673
674 
   // If this is defined, the currently active mesh will be saved in the
 674 
   // If this is defined, the currently active mesh will be saved in the
675 
   // current slot on M500.
 675 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h Bestand weergeven

661 
 // Below are the macros that are used to define the borders for the mesh area,
 661 
 // Below are the macros that are used to define the borders for the mesh area,
662 
 // made available here for specialized needs, ie dual extruder setup.
 662 
 // made available here for specialized needs, ie dual extruder setup.
663 
 #if ENABLED(MESH_BED_LEVELING)
 663 
 #if ENABLED(MESH_BED_LEVELING)
664 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 664 
+  #define MESH_MIN_X MESH_INSET
665 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 665 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
666 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_Y MESH_INSET
667 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
669 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 669 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
670 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 670 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
671 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
673
673
674 
   // If this is defined, the currently active mesh will be saved in the
 674 
   // If this is defined, the currently active mesh will be saved in the
675 
   // current slot on M500.
 675 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/Malyan/M150/Configuration_adv.h Bestand weergeven

661 
 // Below are the macros that are used to define the borders for the mesh area,
 661 
 // Below are the macros that are used to define the borders for the mesh area,
662 
 // made available here for specialized needs, ie dual extruder setup.
 662 
 // made available here for specialized needs, ie dual extruder setup.
663 
 #if ENABLED(MESH_BED_LEVELING)
 663 
 #if ENABLED(MESH_BED_LEVELING)
664 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 664 
+  #define MESH_MIN_X MESH_INSET
665 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 665 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
666 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_Y MESH_INSET
667 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
669 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 669 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
670 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 670 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
671 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
673
673
674 
   // If this is defined, the currently active mesh will be saved in the
 674 
   // If this is defined, the currently active mesh will be saved in the
675 
   // current slot on M500.
 675 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/RigidBot/Configuration_adv.h Bestand weergeven

661 
 // Below are the macros that are used to define the borders for the mesh area,
 661 
 // Below are the macros that are used to define the borders for the mesh area,
662 
 // made available here for specialized needs, ie dual extruder setup.
 662 
 // made available here for specialized needs, ie dual extruder setup.
663 
 #if ENABLED(MESH_BED_LEVELING)
 663 
 #if ENABLED(MESH_BED_LEVELING)
664 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 664 
+  #define MESH_MIN_X MESH_INSET
665 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 665 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
666 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_Y MESH_INSET
667 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
669 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 669 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
670 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 670 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
671 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
673
673
674 
   // If this is defined, the currently active mesh will be saved in the
 674 
   // If this is defined, the currently active mesh will be saved in the
675 
   // current slot on M500.
 675 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/SCARA/Configuration_adv.h Bestand weergeven

661 
 // Below are the macros that are used to define the borders for the mesh area,
 661 
 // Below are the macros that are used to define the borders for the mesh area,
662 
 // made available here for specialized needs, ie dual extruder setup.
 662 
 // made available here for specialized needs, ie dual extruder setup.
663 
 #if ENABLED(MESH_BED_LEVELING)
 663 
 #if ENABLED(MESH_BED_LEVELING)
664 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 664 
+  #define MESH_MIN_X MESH_INSET
665 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 665 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
666 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_Y MESH_INSET
667 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
669 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 669 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
670 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 670 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
671 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
673
673
674 
   // If this is defined, the currently active mesh will be saved in the
 674 
   // If this is defined, the currently active mesh will be saved in the
675 
   // current slot on M500.
 675 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/TinyBoy2/Configuration_adv.h Bestand weergeven

661 
 // Below are the macros that are used to define the borders for the mesh area,
 661 
 // Below are the macros that are used to define the borders for the mesh area,
662 
 // made available here for specialized needs, ie dual extruder setup.
 662 
 // made available here for specialized needs, ie dual extruder setup.
663 
 #if ENABLED(MESH_BED_LEVELING)
 663 
 #if ENABLED(MESH_BED_LEVELING)
664 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 664 
+  #define MESH_MIN_X MESH_INSET
665 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 665 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
666 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_Y MESH_INSET
667 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
669 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 669 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
670 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 670 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
671 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
673
673
674 
   // If this is defined, the currently active mesh will be saved in the
 674 
   // If this is defined, the currently active mesh will be saved in the
675 
   // current slot on M500.
 675 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/Velleman/K8200/Configuration_adv.h Bestand weergeven

674 
 // Below are the macros that are used to define the borders for the mesh area,
 674 
 // Below are the macros that are used to define the borders for the mesh area,
675 
 // made available here for specialized needs, ie dual extruder setup.
 675 
 // made available here for specialized needs, ie dual extruder setup.
676 
 #if ENABLED(MESH_BED_LEVELING)
 676 
 #if ENABLED(MESH_BED_LEVELING)
677 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 677 
+  #define MESH_MIN_X MESH_INSET
678 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 678 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
679 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 679 
+  #define MESH_MIN_Y MESH_INSET
680 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 680 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
681 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 681 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
682 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 682 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
683 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 683 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
684 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 684 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
685 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 685 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
686
686
687 
   // If this is defined, the currently active mesh will be saved in the
 687 
   // If this is defined, the currently active mesh will be saved in the
688 
   // current slot on M500.
 688 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/Velleman/K8400/Configuration_adv.h Bestand weergeven

661 
 // Below are the macros that are used to define the borders for the mesh area,
 661 
 // Below are the macros that are used to define the borders for the mesh area,
662 
 // made available here for specialized needs, ie dual extruder setup.
 662 
 // made available here for specialized needs, ie dual extruder setup.
663 
 #if ENABLED(MESH_BED_LEVELING)
 663 
 #if ENABLED(MESH_BED_LEVELING)
664 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 664 
+  #define MESH_MIN_X MESH_INSET
665 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 665 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
666 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_Y MESH_INSET
667 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
669 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 669 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
670 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 670 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
671 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
673
673
674 
   // If this is defined, the currently active mesh will be saved in the
 674 
   // If this is defined, the currently active mesh will be saved in the
675 
   // current slot on M500.
 675 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h Bestand weergeven

663 
 // Below are the macros that are used to define the borders for the mesh area,
 663 
 // Below are the macros that are used to define the borders for the mesh area,
664 
 // made available here for specialized needs, ie dual extruder setup.
 664 
 // made available here for specialized needs, ie dual extruder setup.
665 
 #if ENABLED(MESH_BED_LEVELING)
 665 
 #if ENABLED(MESH_BED_LEVELING)
666 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_X MESH_INSET
667 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
668 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 668 
+  #define MESH_MIN_Y MESH_INSET
669 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 669 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
670 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 670 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
671 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
673 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 673 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
674 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 674 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
675
675
676 
   // If this is defined, the currently active mesh will be saved in the
 676 
   // If this is defined, the currently active mesh will be saved in the
677 
   // current slot on M500.
 677 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h Bestand weergeven

663 
 // Below are the macros that are used to define the borders for the mesh area,
 663 
 // Below are the macros that are used to define the borders for the mesh area,
664 
 // made available here for specialized needs, ie dual extruder setup.
 664 
 // made available here for specialized needs, ie dual extruder setup.
665 
 #if ENABLED(MESH_BED_LEVELING)
 665 
 #if ENABLED(MESH_BED_LEVELING)
666 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_X MESH_INSET
667 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
668 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 668 
+  #define MESH_MIN_Y MESH_INSET
669 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 669 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
670 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 670 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
671 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
673 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 673 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
674 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 674 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
675
675
676 
   // If this is defined, the currently active mesh will be saved in the
 676 
   // If this is defined, the currently active mesh will be saved in the
677 
   // current slot on M500.
 677 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/delta/generic/Configuration_adv.h Bestand weergeven

663 
 // Below are the macros that are used to define the borders for the mesh area,
 663 
 // Below are the macros that are used to define the borders for the mesh area,
664 
 // made available here for specialized needs, ie dual extruder setup.
 664 
 // made available here for specialized needs, ie dual extruder setup.
665 
 #if ENABLED(MESH_BED_LEVELING)
 665 
 #if ENABLED(MESH_BED_LEVELING)
666 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_X MESH_INSET
667 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
668 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 668 
+  #define MESH_MIN_Y MESH_INSET
669 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 669 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
670 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 670 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
671 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
673 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 673 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
674 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 674 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
675
675
676 
   // If this is defined, the currently active mesh will be saved in the
 676 
   // If this is defined, the currently active mesh will be saved in the
677 
   // current slot on M500.
 677 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h Bestand weergeven

663 
 // Below are the macros that are used to define the borders for the mesh area,
 663 
 // Below are the macros that are used to define the borders for the mesh area,
664 
 // made available here for specialized needs, ie dual extruder setup.
 664 
 // made available here for specialized needs, ie dual extruder setup.
665 
 #if ENABLED(MESH_BED_LEVELING)
 665 
 #if ENABLED(MESH_BED_LEVELING)
666 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_X MESH_INSET
667 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
668 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 668 
+  #define MESH_MIN_Y MESH_INSET
669 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 669 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
670 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 670 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
671 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
673 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 673 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
674 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 674 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
675
675
676 
   // If this is defined, the currently active mesh will be saved in the
 676 
   // If this is defined, the currently active mesh will be saved in the
677 
   // current slot on M500.
 677 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h Bestand weergeven

668 
 // Below are the macros that are used to define the borders for the mesh area,
 668 
 // Below are the macros that are used to define the borders for the mesh area,
669 
 // made available here for specialized needs, ie dual extruder setup.
 669 
 // made available here for specialized needs, ie dual extruder setup.
670 
 #if ENABLED(MESH_BED_LEVELING)
 670 
 #if ENABLED(MESH_BED_LEVELING)
671 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 671 
+  #define MESH_MIN_X MESH_INSET
672 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 672 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
673 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 673 
+  #define MESH_MIN_Y MESH_INSET
674 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 674 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
675 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 675 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
676 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 676 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
677 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 677 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
678 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 678 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
679 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 679 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
680
680
681 
   // If this is defined, the currently active mesh will be saved in the
 681 
   // If this is defined, the currently active mesh will be saved in the
682 
   // current slot on M500.
 682 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h Bestand weergeven

663 
 // Below are the macros that are used to define the borders for the mesh area,
 663 
 // Below are the macros that are used to define the borders for the mesh area,
664 
 // made available here for specialized needs, ie dual extruder setup.
 664 
 // made available here for specialized needs, ie dual extruder setup.
665 
 #if ENABLED(MESH_BED_LEVELING)
 665 
 #if ENABLED(MESH_BED_LEVELING)
666 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_X MESH_INSET
667 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
668 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 668 
+  #define MESH_MIN_Y MESH_INSET
669 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 669 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
670 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 670 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
671 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
673 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 673 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
674 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 674 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
675
675
676 
   // If this is defined, the currently active mesh will be saved in the
 676 
   // If this is defined, the currently active mesh will be saved in the
677 
   // current slot on M500.
 677 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h Bestand weergeven

661 
 // Below are the macros that are used to define the borders for the mesh area,
 661 
 // Below are the macros that are used to define the borders for the mesh area,
662 
 // made available here for specialized needs, ie dual extruder setup.
 662 
 // made available here for specialized needs, ie dual extruder setup.
663 
 #if ENABLED(MESH_BED_LEVELING)
 663 
 #if ENABLED(MESH_BED_LEVELING)
664 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 664 
+  #define MESH_MIN_X MESH_INSET
665 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 665 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
666 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_Y MESH_INSET
667 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
669 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 669 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
670 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 670 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
671 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
673
673
674 
   // If this is defined, the currently active mesh will be saved in the
 674 
   // If this is defined, the currently active mesh will be saved in the
675 
   // current slot on M500.
 675 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/makibox/Configuration_adv.h Bestand weergeven

661 
 // Below are the macros that are used to define the borders for the mesh area,
 661 
 // Below are the macros that are used to define the borders for the mesh area,
662 
 // made available here for specialized needs, ie dual extruder setup.
 662 
 // made available here for specialized needs, ie dual extruder setup.
663 
 #if ENABLED(MESH_BED_LEVELING)
 663 
 #if ENABLED(MESH_BED_LEVELING)
664 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 664 
+  #define MESH_MIN_X MESH_INSET
665 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 665 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
666 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_Y MESH_INSET
667 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
669 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 669 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
670 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 670 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
671 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
673
673
674 
   // If this is defined, the currently active mesh will be saved in the
 674 
   // If this is defined, the currently active mesh will be saved in the
675 
   // current slot on M500.
 675 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h Bestand weergeven

661 
 // Below are the macros that are used to define the borders for the mesh area,
 661 
 // Below are the macros that are used to define the borders for the mesh area,
662 
 // made available here for specialized needs, ie dual extruder setup.
 662 
 // made available here for specialized needs, ie dual extruder setup.
663 
 #if ENABLED(MESH_BED_LEVELING)
 663 
 #if ENABLED(MESH_BED_LEVELING)
664 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 664 
+  #define MESH_MIN_X MESH_INSET
665 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 665 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
666 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_Y MESH_INSET
667 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
669 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 669 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
670 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 670 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
671 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
673
673
674 
   // If this is defined, the currently active mesh will be saved in the
 674 
   // If this is defined, the currently active mesh will be saved in the
675 
   // current slot on M500.
 675 
   // current slot on M500.

+ 8
- 8
Marlin/example_configurations/wt150/Configuration_adv.h Bestand weergeven

661 
 // Below are the macros that are used to define the borders for the mesh area,
 661 
 // Below are the macros that are used to define the borders for the mesh area,
662 
 // made available here for specialized needs, ie dual extruder setup.
 662 
 // made available here for specialized needs, ie dual extruder setup.
663 
 #if ENABLED(MESH_BED_LEVELING)
 663 
 #if ENABLED(MESH_BED_LEVELING)
664 
-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
 664 
+  #define MESH_MIN_X MESH_INSET
665 
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
 665 
+  #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET))
666 
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
 666 
+  #define MESH_MIN_Y MESH_INSET
667 
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
 667 
+  #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET))
668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 668 
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
669 
-  #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET)
 669 
+  #define UBL_MESH_MIN_X UBL_MESH_INSET
670 
-  #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
 670 
+  #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET))
671 
-  #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
 671 
+  #define UBL_MESH_MIN_Y UBL_MESH_INSET
672 
-  #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
 672 
+  #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET))
673
673
674 
   // If this is defined, the currently active mesh will be saved in the
 674 
   // If this is defined, the currently active mesh will be saved in the
675 
   // current slot on M500.
 675 
   // current slot on M500.

Schrijf Voorbeeld
Laden…
Annuleren
Opslaan