Tweaked accel, bed size, etc.

Marlin/Configuration.h

  * Override with M201
  *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
-#define DEFAULT_MAX_ACCELERATION      { 2000, 2000, 100, 10000 }
+#define DEFAULT_MAX_ACCELERATION      { 500, 500, 50, 1000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s
  */
 #define DEFAULT_ACCELERATION          400    // X, Y, Z and E acceleration for printing moves
 #define DEFAULT_RETRACT_ACCELERATION  1000    // E acceleration for retracts
-#define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
+#define DEFAULT_TRAVEL_ACCELERATION   500    // X, Y, Z acceleration for travel (non printing) moves
 
 /**
  * Default Jerk (mm/s)
  * When changing speed and direction, if the difference is less than the
  * value set here, it may happen instantaneously.
  */
-#define DEFAULT_XJERK                 20.0
-#define DEFAULT_YJERK                 20.0
+#define DEFAULT_XJERK                 10.0
+#define DEFAULT_YJERK                 10.0
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
 // @section machine
 
 // The size of the print bed
-#define X_BED_SIZE 215
-#define Y_BED_SIZE 215
+#define X_BED_SIZE 190
+#define Y_BED_SIZE 200
 
 // Travel limits (mm) after homing, corresponding to endstop positions.
-#define X_MIN_POS -33
+#define X_MIN_POS -5
 #define Y_MIN_POS -10
 #define Z_MIN_POS 0
 #define X_MAX_POS X_BED_SIZE
 #define Y_MAX_POS Y_BED_SIZE
-#define Z_MAX_POS 240
+#define Z_MAX_POS 200
 
 // If enabled, axes won't move below MIN_POS in response to movement commands.
 #define MIN_SOFTWARE_ENDSTOPS