Move default machine info to pins files

Marlin/language.h

@@ -71,40 +71,20 @@
 
 #define PROTOCOL_VERSION "1.0"
 
-#if MB(ULTIMAKER)|| MB(ULTIMAKER_OLD)|| MB(ULTIMAIN_2)
-  #define DEFAULT_MACHINE_NAME "Ultimaker"
-#elif MB(RUMBA)
-  #define DEFAULT_MACHINE_NAME "Rumba"
-#elif MB(3DRAG)
-  #define DEFAULT_MACHINE_NAME "3Drag"
-#elif MB(K8200)
-  #define DEFAULT_MACHINE_NAME "K8200"
-#elif MB(5DPRINT)
-  #define DEFAULT_MACHINE_NAME "Makibox"
-#elif MB(SAV_MKI)
-  #define DEFAULT_MACHINE_NAME "SAV MkI"
-#else
+#ifndef DEFAULT_MACHINE_NAME
   #define DEFAULT_MACHINE_NAME "3D Printer"
 #endif
 
-#if MB(ULTIMAKER)|| MB(ULTIMAKER_OLD)|| MB(ULTIMAIN_2)
-  #define DEFAULT_SOURCE_URL "https://github.com/Ultimaker/Marlin"
-#elif MB(3DRAG)
-  #define DEFAULT_SOURCE_URL "http://3dprint.elettronicain.it/"
-#elif MB(K8200)
-  #define DEFAULT_SOURCE_URL "https://github.com/CONSULitAS/Marlin-K8200"
-#elif MB(SAV_MKI)
-  #define DEFAULT_SOURCE_URL "https://github.com/fmalpartida/Marlin/tree/SAV-MkI-config"
-#else
-  #define DEFAULT_SOURCE_URL "https://github.com/MarlinFirmware/Marlin"
-#endif
-
 #ifdef CUSTOM_MACHINE_NAME
   #define MACHINE_NAME CUSTOM_MACHINE_NAME
 #else
   #define MACHINE_NAME DEFAULT_MACHINE_NAME
 #endif
 
+#ifndef DEFAULT_SOURCE_URL
+  #define DEFAULT_SOURCE_URL "https://github.com/MarlinFirmware/Marlin"
+#endif
+
 #ifndef SOURCE_CODE_URL
   #define SOURCE_CODE_URL DEFAULT_SOURCE_URL
 #endif

Marlin/pins_3DRAG.h

@@ -26,6 +26,9 @@
 
 #include "pins_RAMPS_14.h"
 
+#define DEFAULT_MACHINE_NAME "3Drag"
+#define DEFAULT_SOURCE_URL   "http://3dprint.elettronicain.it/"
+
 #undef Z_ENABLE_PIN
 #define Z_ENABLE_PIN       63
 

Marlin/pins_5DPRINT.h

@@ -30,6 +30,8 @@
   #error Oops!  Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
 #endif
 
+#define DEFAULT_MACHINE_NAME "Makibox"
+
 #define LARGE_FLASH        true
 
 #define X_STEP_PIN          0

Marlin/pins_K8200.h

@@ -26,3 +26,9 @@
  */
 
 #include "pins_3DRAG.h"
+
+#undef DEFAULT_MACHINE_NAME
+#define DEFAULT_MACHINE_NAME "K8200"
+
+#undef DEFAULT_SOURCE_URL
+#define DEFAULT_SOURCE_URL   "https://github.com/CONSULitAS/Marlin-K8200"

Marlin/pins_RUMBA.h

@@ -32,6 +32,8 @@
   #error RUMBA supports up to 3 extruders. Comment this line to keep going.
 #endif
 
+#define DEFAULT_MACHINE_NAME "Rumba"
+
 #define X_STEP_PIN         17
 #define X_DIR_PIN          16
 #define X_ENABLE_PIN       48

Marlin/pins_SAV_MKI.h

@@ -31,6 +31,9 @@
   #error Oops!  Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
 #endif
 
+#define DEFAULT_MACHINE_NAME "SAV MkI"
+#define DEFAULT_SOURCE_URL   "https://github.com/fmalpartida/Marlin/tree/SAV-MkI-config"
+
 #define LARGE_FLASH        true
 
 #define X_STEP_PIN         0

Marlin/pins_ULTIMAIN_2.h

@@ -28,6 +28,9 @@
   #error Oops!  Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu.
 #endif
 
+#define DEFAULT_MACHINE_NAME "Ultimaker"
+#define DEFAULT_SOURCE_URL   "https://github.com/Ultimaker/Marlin"
+
 #define X_STEP_PIN 25
 #define X_DIR_PIN 23
 #define X_STOP_PIN 22

Marlin/pins_ULTIMAKER.h

@@ -28,6 +28,9 @@
   #error Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
 #endif
 
+#define DEFAULT_MACHINE_NAME "Ultimaker"
+#define DEFAULT_SOURCE_URL   "https://github.com/Ultimaker/Marlin"
+
 #define LARGE_FLASH true
 
 #define SERVO0_PIN 13 // untested

Marlin/pins_ULTIMAKER_OLD.h

@@ -28,6 +28,9 @@
   #error Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
 #endif
 
+#define DEFAULT_MACHINE_NAME "Ultimaker"
+#define DEFAULT_SOURCE_URL   "https://github.com/Ultimaker/Marlin"
+
 #define LARGE_FLASH true
 
 #define X_STEP_PIN 25