Shorten some config descriptions

Marlin/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/default/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/3DFabXYZ/Migbot/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MKS_BASE_14
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "3DFabXYZ i3"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/AlephObjects/TAZ4/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMBO
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "TAZ"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/AliExpress/CL-260/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "CL-260"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/AliExpress/UM2pExt/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_ULTIMAIN_2
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Anet/A2/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_ANET_10
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Anet A2"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Anet/A2plus/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_ANET_10
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Anet A2+"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Anet/A6/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_ANET_10
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Anet A6"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Anet/A8/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_ANET_10
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Anet A8"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Anet/A8plus/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_ANET_10
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Anet A8 plus"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Anet/E16/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_ANET_10
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "AnetE16V1.3"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/AnyCubic/i3/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_TRIGORILLA_14
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Anycubic i3"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/ArmEd/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_ARMED
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Azteeg/X5GT/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_AZTEEG_X5_GT
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/BIBO/TouchX/cyclops/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MKS_GEN_L
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "BIBO2 Touch X"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/BIBO/TouchX/default/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MKS_GEN_L
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "BIBO2 Touch X"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/BQ/Hephestos/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "HEPHESTOS"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/BQ/Hephestos_2/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "BQ Hephestos 2"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 #define MACHINE_UUID "8d083632-40c5-4649-85b8-43d9ae6c5d55" // BQ Hephestos 2 standard config
 
 // @section extruder

config/examples/BQ/WITBOX/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "WITBOX"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Cartesio/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   //#define MOTHERBOARD BOARD_CNCONTROLS_11
   #define MOTHERBOARD BOARD_CNCONTROLS_12
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "CartesioE"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Creality/CR-10/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MELZI_CREALITY
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "CR-10"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Creality/CR-10S/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_CREALITY
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "CR-10S"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Creality/CR-10_5S/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_CREALITY
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "CR-10 S5"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Creality/CR-10mini/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MELZI_CREALITY
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "CR-10 Mini"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Creality/CR-20 Pro/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "CR-20 Pro"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Creality/CR-20/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "CR-20"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Creality/CR-8/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_ENDER_4
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "CR-8"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Creality/Ender-2/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MELZI_CREALITY
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Ender 3D"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Creality/Ender-3/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MELZI_CREALITY
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Ender-3"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Creality/Ender-4/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_ENDER_4
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Ender-4"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Creality/Ender-5/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MELZI_CREALITY
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Ender-5"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Dagoma/Disco Ultimate/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_DAGOMA
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "DiscoUltimate"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MKS_GEN_L
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Sidewinder X1"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Einstart-S/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_EINSTART_S
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "The Shining"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Felix/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_FELIX2
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Felix"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Felix/DUAL/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_FELIX2
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Felix Dual"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/FlashForge/CreatorPro/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MIGHTYBOARD_REVE
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "CreatorPro"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/FolgerTech/i3-2020/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "FT-2020 v9"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Formbot/Raptor/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_FORMBOT_RAPTOR
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "TM3D RaPtOr"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Formbot/T_Rex_2+/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_FORMBOT_TREX2PLUS
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
   #define CUSTOM_MACHINE_NAME "T-Rex 2+"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Formbot/T_Rex_3/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_FORMBOT_TREX3
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "T-Rex 3"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Fysetc/AIO_II/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_FYSETC_AIO_II
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Fysetc/CHEETAH/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_FYSETC_CHEETAH
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Fysetc/F6_13/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   //#define MOTHERBOARD BOARD_RAMPS_14_EFB
   //#define MOTHERBOARD BOARD_FYSETC_AIO_II
   #define MOTHERBOARD BOARD_FYSETC_F6_13
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Geeetech/A10/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_GT2560_V3
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Geeetech A10"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Geeetech/A10M/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_GT2560_V3
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Geeetech A10M"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Geeetech/A20M/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_GT2560_V3_A20
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Geeetech A20M"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Geeetech/GT2560/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_GT2560_REV_A
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "RdW i3 Pro X"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Geeetech/MeCreator2/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_GT2560_V3_MC2
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "MeCreator2"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "i3 Pro B"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "i3 Pro B"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Geeetech/Prusa i3 Pro C/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_GT2560_REV_A
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "i3 Pro C"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Geeetech/Prusa i3 Pro W/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "i3 Pro W"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Infitary/i3-M508/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_13_EFB
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Infitary M508"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/JGAurora/A1/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_JGAURORA_A5S_A1
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "JGAurora A1"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/JGAurora/A5/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MKS_GEN_L
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "JGAurora A5"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/JGAurora/A5S/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_JGAURORA_A5S_A1
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "JGAurora A5S"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/MakerParts/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_DUO_EFB
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "MakerParts 3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 #define MACHINE_UUID "4250d842-4943-4601-acca-95ef77b8a4f1"
 
 // @section extruder

config/examples/Malyan/M150/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MELZI_MALYAN
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Malyan M150"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 #define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Malyan/M200/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MALYAN_M200
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Malyan M200"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Micromake/C1/basic/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MAKEBOARD_MINI
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Micromake C1"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Micromake/C1/enhanced/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MAKEBOARD_MINI
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Micromake C1"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Mks/Robin/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MKS_ROBIN
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "MKS Robin"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Mks/Sbase/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MKS_SBASE
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Printrbot/PrintrboardG2/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_PRINTRBOARD_G2
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/RapideLite/RL200/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RL200
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Rapide Lite 200"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/RepRapPro/Huxley/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_SANGUINOLOLU_12
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Huxley"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/RepRapWorld/Megatronics/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MEGATRONICS_3
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/RigidBot/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 // for Rigidbot version 1 : #define MOTHERBOARD BOARD_RIGIDBOARD
 // for Rigidbot Version 2 : #define MOTHERBOARD BOARD_RIGIDBOARD_V2
 
   #define MOTHERBOARD BOARD_RIGIDBOARD_V2
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Rigidbot"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/SCARA/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "SCARA"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/STM32/Black_STM32F407VET6/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_BLACK_STM32F407VE
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/STM32/STM32F10/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_STM32F1R
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "CTC i3 Pro B"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/STM32/STM32F4/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_STM32F4
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/STM32/stm32f103ret6/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_STM32F1R
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "CTC i3 Pro B"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Sanguinololu/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_SANGUINOLOLU_12
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Sanguinololu"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Tevo/Tarantula Pro/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MKS_GEN_L
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Tarantula Pro"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/TheBorg/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
  #define MOTHERBOARD BOARD_THE_BORG
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/TinyBoy2/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MELZI
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #if ENABLED(TB2_L10)
   #define CUSTOM_MACHINE_NAME "TinyBoy2 L10"
 #elif ENABLED(TB2_L16)
   #error "Please select TB2_L10 or TB2_L16"
 #endif
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Tronxy/X1/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MELZI
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Tronxy X1"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Tronxy/X3A/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MELZI //63
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Tronxy X3A"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Tronxy/X5S-2E/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_TRONXY_V3_1_0
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Tronxy X5S-2E"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Tronxy/X5S/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MELZI_TRONXY
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Tronxy X5S"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Tronxy/XY100/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MELZI
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "TronXY XY100"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/UltiMachine/Archim1/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_ARCHIM1
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/UltiMachine/Archim2/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_ARCHIM2
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/VORONDesign/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_VORON
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "VORON 2.0"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Velleman/K8200/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_K8200
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "K8200"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 #if ENABLED(K8200_VM8201)
   #define MACHINE_UUID "2b7dea3b-844e-4ab1-aa96-bb6406607d6e" // K8200 standard config with VM8201 (Display)
 #else

config/examples/Velleman/K8400/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_K8400
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Velleman/K8400/Dual-head/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_K8400
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/WASP/PowerWASP/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_ULTIMAKER
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
-#define CUSTOM_MACHINE_NAME " PowerWASP is "
+// Name displayed in the LCD "Ready" message and Info menu
+#define CUSTOM_MACHINE_NAME "PowerWASP"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Wanhao/Duplicator 6/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_ULTIMAIN_2
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Duplicator 6"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/Wanhao/Duplicator i3 Mini/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_WANHAO_ONEPLUS
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "i3 Mini"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/adafruit/ST7565/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/delta/Anycubic/Kossel/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_TRIGORILLA_14
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "ANYCUBIC Kossel"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/delta/FLSUN/auto_calibrate/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_13_EFB
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "FLSUN Kossel"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/delta/FLSUN/kossel/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_13_EFB
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "FLSUN Kossel"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder

config/examples/delta/FLSUN/kossel_mini/Configuration.h

 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// The following define selects which electronics board you have.
-// Please choose the name from boards.h that matches your setup
+// Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_13_EFB
 #endif
 
-// Optional custom name for your RepStrap or other custom machine
-// Displayed in the LCD "Ready" message
+// Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "Mini Kossel"
 
-// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
-// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+// Printer's unique ID, used by some programs to differentiate between machines.
+// Choose your own or use a service like http://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder