thomas
/
marlin
關注 1
收藏 0
複製 0
程式碼 問題 0 合併請求 0 版本發佈 0 Wiki 活動
瀏覽代碼

config update (set to -1)

Bob-the-Kuhn 7 年之前
父節點
21e60fd3ed
當前提交
349dafa728
共有 39 個檔案被更改，包括 39 行新增 和 39 行删除
統一視圖 顯示文件統計
  1. 1
    1
      Marlin/Configuration_adv.h
  2. 1
    1
      Marlin/src/config/default/Configuration_adv.h
  3. 1
    1
      Marlin/src/config/examples/Anet/A6/Configuration_adv.h
  4. 1
    1
      Marlin/src/config/examples/Anet/A8/Configuration_adv.h
  5. 1
    1
      Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
  6. 1
    1
      Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h
  7. 1
    1
      Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
  8. 1
    1
      Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
  9. 1
    1
      Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
  10. 1
    1
      Marlin/src/config/examples/Cartesio/Configuration_adv.h
  11. 1
    1
      Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
  12. 1
    1
      Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
  13. 1
    1
      Marlin/src/config/examples/Creality/Ender/Configuration_adv.h
  14. 1
    1
      Marlin/src/config/examples/Felix/Configuration_adv.h
  15. 1
    1
      Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
  16. 1
    1
      Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
  17. 1
    1
      Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
  18. 1
    1
      Marlin/src/config/examples/MakerParts/Configuration_adv.h
  19. 1
    1
      Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
  20. 1
    1
      Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
  21. 1
    1
      Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
  22. 1
    1
      Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
  23. 1
    1
      Marlin/src/config/examples/SCARA/Configuration_adv.h
  24. 1
    1
      Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
  25. 1
    1
      Marlin/src/config/examples/TheBorg/Configuration_adv.h
  26. 1
    1
      Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
  27. 1
    1
      Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
  28. 1
    1
      Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
  29. 1
    1
      Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
  30. 1
    1
      Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
  31. 1
    1
      Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
  32. 1
    1
      Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
  33. 1
    1
      Marlin/src/config/examples/delta/generic/Configuration_adv.h
  34. 1
    1
      Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
  35. 1
    1
      Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
  36. 1
    1
      Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
  37. 1
    1
      Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
  38. 1
    1
      Marlin/src/config/examples/makibox/Configuration_adv.h
  39. 1
    1
      Marlin/src/config/examples/wt150/Configuration_adv.h

+ 1
- 1
Marlin/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/default/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/Anet/A6/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/Anet/A8/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/Cartesio/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/Creality/Ender/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/Felix/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/MakerParts/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/SCARA/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/TheBorg/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h 查看文件

198 
  */
 198 
  */
199 
 //#define USE_CONTROLLER_FAN
 199 
 //#define USE_CONTROLLER_FAN
200 
 #if ENABLED(USE_CONTROLLER_FAN)
 200 
 #if ENABLED(USE_CONTROLLER_FAN)
201 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
201 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
202 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 202 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
203 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 203 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
204 
 #endif
 204 
 #endif

+ 1
- 1
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/delta/generic/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h 查看文件

190 
  */
 190 
  */
191 
 //#define USE_CONTROLLER_FAN
 191 
 //#define USE_CONTROLLER_FAN
192 
 #if ENABLED(USE_CONTROLLER_FAN)
 192 
 #if ENABLED(USE_CONTROLLER_FAN)
193 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
193 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
194 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 194 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
195 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 195 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
196 
 #endif
 196 
 #endif

+ 1
- 1
Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/makibox/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

+ 1
- 1
Marlin/src/config/examples/wt150/Configuration_adv.h 查看文件

185 
  */
 185 
  */
186 
 //#define USE_CONTROLLER_FAN
 186 
 //#define USE_CONTROLLER_FAN
187 
 #if ENABLED(USE_CONTROLLER_FAN)
 187 
 #if ENABLED(USE_CONTROLLER_FAN)
188 
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
188 
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
 189 
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 190 
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
191 
 #endif
 191 
 #endif

Write Preview
Loading…
取消
儲存