🩹 Wrap SENSORLESS_STALLGUARD_DELAY

Marlin/src/gcode/calibrate/G28.cpp

       stepperW.rms_current(W_CURRENT_HOME);
       if (DEBUGGING(LEVELING)) debug_current(F(STR_W), tmc_save_current_W, W_CURRENT_HOME);
     #endif
-    safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle
+    #if SENSORLESS_STALLGUARD_DELAY
+      safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle
+    #endif
   #endif
 
   #if ENABLED(IMPROVE_HOMING_RELIABILITY)
     #if HAS_CURRENT_HOME(W)
       stepperW.rms_current(tmc_save_current_W);
     #endif
-    safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle
+    #if SENSORLESS_STALLGUARD_DELAY
+      safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle
+    #endif
   #endif // HAS_HOMING_CURRENT
 
   ui.refresh();

Marlin/src/inc/Conditionals_adv.h

 #if ANY(DISABLE_INACTIVE_X, DISABLE_INACTIVE_Y, DISABLE_INACTIVE_Z, DISABLE_INACTIVE_I, DISABLE_INACTIVE_J, DISABLE_INACTIVE_K, DISABLE_INACTIVE_U, DISABLE_INACTIVE_V, DISABLE_INACTIVE_W, DISABLE_INACTIVE_E)
   #define HAS_DISABLE_INACTIVE_AXIS 1
 #endif
-
-// Delay Sensorless Homing/Probing
-#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) && !defined(SENSORLESS_STALLGUARD_DELAY)
-  #define SENSORLESS_STALLGUARD_DELAY 0
-#endif

Marlin/src/module/delta.cpp

     TERN_(U_SENSORLESS, sensorless_t stealth_states_u = start_sensorless_homing_per_axis(U_AXIS));
     TERN_(V_SENSORLESS, sensorless_t stealth_states_v = start_sensorless_homing_per_axis(V_AXIS));
     TERN_(W_SENSORLESS, sensorless_t stealth_states_w = start_sensorless_homing_per_axis(W_AXIS));
-    safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle
+    #if SENSORLESS_STALLGUARD_DELAY
+      safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle
+    #endif
   #endif
 
   // Move all carriages together linearly until an endstop is hit.
     TERN_(U_SENSORLESS, end_sensorless_homing_per_axis(U_AXIS, stealth_states_u));
     TERN_(V_SENSORLESS, end_sensorless_homing_per_axis(V_AXIS, stealth_states_v));
     TERN_(W_SENSORLESS, end_sensorless_homing_per_axis(W_AXIS, stealth_states_w));
-    safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle
+    #if SENSORLESS_STALLGUARD_DELAY
+      safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle
+    #endif
   #endif
 
   endstops.validate_homing_move();

Marlin/src/module/endstops.cpp

       }
 
       TERN_(IMPROVE_HOMING_RELIABILITY, planner.enable_stall_prevention(onoff));
-      safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle
+
+      #if SENSORLESS_STALLGUARD_DELAY
+        safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle
+      #endif
 
     #endif // XYZ
   }

Marlin/src/module/motion.cpp

       // Disable stealthChop if used. Enable diag1 pin on driver.
       #if ENABLED(SENSORLESS_HOMING)
         stealth_states = start_sensorless_homing_per_axis(axis);
-        safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle
+        #if SENSORLESS_STALLGUARD_DELAY
+          safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle
+        #endif
       #endif
     }
 
       // Re-enable stealthChop if used. Disable diag1 pin on driver.
       #if ENABLED(SENSORLESS_HOMING)
         end_sensorless_homing_per_axis(axis, stealth_states);
-        safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle
+        #if SENSORLESS_STALLGUARD_DELAY
+          safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle
+        #endif
       #endif
     }
   }