Remove trailing spaces, old comment

Marlin/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/default/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Anet/A2/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -1281,7 +1281,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Cartesio/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Einstart-S/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Felix/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h

@@ -1275,7 +1275,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -1277,7 +1277,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -1278,7 +1278,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/MakerParts/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Malyan/M200/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@@ -1281,7 +1281,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/RigidBot/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/SCARA/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/TheBorg/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -1286,7 +1286,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -1275,7 +1275,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h

@@ -1275,7 +1275,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -1275,7 +1275,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -1275,7 +1275,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -1275,7 +1275,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -1275,7 +1275,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -1275,7 +1275,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -1275,7 +1275,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/makibox/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/config/examples/wt150/Configuration_adv.h

@@ -1274,7 +1274,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */

Marlin/src/module/motion.cpp

@@ -287,7 +287,6 @@ void buffer_line_to_destination(const float fr_mm_s) {
 
 /**
  *  Plan a move to (X, Y, Z) and set the current_position
- *  The final current_position may not be the one that was requested
  */
 void do_blocking_move_to(const float rx, const float ry, const float rz, const float &fr_mm_s/*=0.0*/) {
   const float old_feedrate_mm_s = feedrate_mm_s;

Marlin/src/module/probe.cpp

@@ -551,7 +551,7 @@ static bool do_probe_move(const float z, const float fr_mm_s) {
   do_blocking_move_to_z(z, fr_mm_s);
 
   // Check to see if the probe was triggered
-  const bool probe_triggered = 
+  const bool probe_triggered =
     #if ENABLED(DELTA) && ENABLED(SENSORLESS_PROBING)
       endstops.trigger_state() & (_BV(X_MIN) | _BV(Y_MIN) | _BV(Z_MIN))
     #else