MSG_CNG_SDCARD => MSG_CHANGE_SDCARD

Marlin/src/lcd/language/language_an.h

 #define MSG_AUTORETRACT                     _UxGT("Retraccion auto.")
 #define MSG_FILAMENTCHANGE                  _UxGT("Cambear filamento")
 #define MSG_INIT_SDCARD                     _UxGT("Encetan. tarcheta")
-#define MSG_CNG_SDCARD                      _UxGT("Cambiar tarcheta")
+#define MSG_CHANGE_SDCARD                   _UxGT("Cambiar tarcheta")
 #define MSG_ZPROBE_OUT                      _UxGT("Sonda Z fuera")
 #define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Auto-Test")
 #define MSG_BLTOUCH_RESET                   _UxGT("Reset BLTouch")

Marlin/src/lcd/language/language_bg.h

 #define MSG_AUTORETRACT                     _UxGT("Автоoткат")
 #define MSG_FILAMENTCHANGE                  _UxGT("Смяна нишка")
 #define MSG_INIT_SDCARD                     _UxGT("Иниц. SD-Карта")
-#define MSG_CNG_SDCARD                      _UxGT("Смяна SD-Карта")
+#define MSG_CHANGE_SDCARD                   _UxGT("Смяна SD-Карта")
 #define MSG_ZPROBE_OUT                      _UxGT("Z-сондата е извадена")
 #define MSG_ZPROBE_ZOFFSET                  _UxGT("Z Отстояние")
 #define MSG_BABYSTEP_X                      _UxGT("Министъпка X")

Marlin/src/lcd/language/language_ca.h

 #define MSG_AUTORETRACT                     _UxGT("Auto retraccio")
 #define MSG_FILAMENTCHANGE                  _UxGT("Canvia filament")
 #define MSG_INIT_SDCARD                     _UxGT("Inicialitza SD")
-#define MSG_CNG_SDCARD                      _UxGT("Canvia SD")
+#define MSG_CHANGE_SDCARD                   _UxGT("Canvia SD")
 #define MSG_ZPROBE_OUT                      _UxGT("Sonda Z fora")
 #define MSG_BLTOUCH_RESET                   _UxGT("Reinicia BLTouch")
 #define MSG_HOME                            _UxGT("Home")  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST

Marlin/src/lcd/language/language_cz.h

 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("Vysunout vše")
 
 #define MSG_INIT_SDCARD                     _UxGT("Načíst SD kartu")
-#define MSG_CNG_SDCARD                      _UxGT("Vyměnit SD kartu")
+#define MSG_CHANGE_SDCARD                   _UxGT("Vyměnit SD kartu")
 #define MSG_ZPROBE_OUT                      _UxGT("Sonda Z mimo podl")
 #define MSG_SKEW_FACTOR                     _UxGT("Faktor zkosení")
 #define MSG_BLTOUCH                         _UxGT("BLTouch")

Marlin/src/lcd/language/language_da.h

 #define MSG_AUTORETRACT                     _UxGT("AutoRetr.")
 #define MSG_FILAMENTCHANGE                  _UxGT("Skift filament")
 #define MSG_INIT_SDCARD                     _UxGT("Init. SD card")
-#define MSG_CNG_SDCARD                      _UxGT("Skift SD kort")
+#define MSG_CHANGE_SDCARD                   _UxGT("Skift SD kort")
 #define MSG_ZPROBE_OUT                      _UxGT("Probe udenfor plade")
 #define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Selv-Test")
 #define MSG_BLTOUCH_RESET                   _UxGT("Reset BLTouch")

Marlin/src/lcd/language/language_de.h

 #define MSG_FILAMENTUNLOAD                  _UxGT("Filament entladen")
 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("Alles entladen")
 #define MSG_INIT_SDCARD                     _UxGT("SD-Karte erkennen")  // Manually initialize the SD-card via user interface
-#define MSG_CNG_SDCARD                      _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21"
+#define MSG_CHANGE_SDCARD                   _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21"
 #define MSG_ZPROBE_OUT                      _UxGT("Z-Sonde außerhalb")
 #define MSG_SKEW_FACTOR                     _UxGT("Korrekturfaktor")
 #define MSG_BLTOUCH                         _UxGT("BLTouch")

Marlin/src/lcd/language/language_el-gr.h

 #define MSG_AUTORETRACT                     _UxGT("Αυτόματη ανάσυρση")
 #define MSG_FILAMENTCHANGE                  _UxGT("Αλλαγή νήματος")
 #define MSG_INIT_SDCARD                     _UxGT("Προετοιμασία κάρτας SD")
-#define MSG_CNG_SDCARD                      _UxGT("Αλλαγή κάρτας SD")
+#define MSG_CHANGE_SDCARD                   _UxGT("Αλλαγή κάρτας SD")
 #define MSG_ZPROBE_OUT                      _UxGT("Διερεύνηση Z εκτός κλίνης")
 #define MSG_YX_UNHOMED                      _UxGT("Επαναφορά Χ/Υ πριν από Ζ")
 #define MSG_XYZ_UNHOMED                     _UxGT("Επαναφορά ΧΥΖ πρώτα")

Marlin/src/lcd/language/language_el.h

 #define MSG_AUTORETRACT                     _UxGT("Αυτόματη ανάσυρση")
 #define MSG_FILAMENTCHANGE                  _UxGT("Αλλαγή νήματος")
 #define MSG_INIT_SDCARD                     _UxGT("Προετοιμασία κάρτας SD")  //SHORTEN
-#define MSG_CNG_SDCARD                      _UxGT("Αλλαγή κάρτας SD")
+#define MSG_CHANGE_SDCARD                   _UxGT("Αλλαγή κάρτας SD")
 #define MSG_ZPROBE_OUT                      _UxGT("Διερεύνηση Z εκτός Επ.Εκτύπωσης") //SHORTEN
 #define MSG_YX_UNHOMED                      _UxGT("Επαναφορά Χ/Υ πριν από Ζ") //SHORTEN
 #define MSG_XYZ_UNHOMED                     _UxGT("Επαναφορά ΧΥΖ πρώτα")

Marlin/src/lcd/language/language_en.h

 #ifndef MSG_INIT_SDCARD
   #define MSG_INIT_SDCARD                     _UxGT("Init. SD card")
 #endif
-#ifndef MSG_CNG_SDCARD
-  #define MSG_CNG_SDCARD                      _UxGT("Change SD card")
+#ifndef MSG_CHANGE_SDCARD
+  #define MSG_CHANGE_SDCARD                   _UxGT("Change SD card")
 #endif
 #ifndef MSG_ZPROBE_OUT
   #define MSG_ZPROBE_OUT                      _UxGT("Z Probe past bed")

Marlin/src/lcd/language/language_es.h

 #define MSG_AUTORETRACT                     _UxGT("Retracción Auto.")
 #define MSG_FILAMENTCHANGE                  _UxGT("Cambiar filamento")
 #define MSG_INIT_SDCARD                     _UxGT("Iniciando tarjeta")
-#define MSG_CNG_SDCARD                      _UxGT("Cambiar tarjeta")
+#define MSG_CHANGE_SDCARD                   _UxGT("Cambiar tarjeta")
 #define MSG_ZPROBE_OUT                      _UxGT("Sonda Z fuera")
 #define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Auto-Prueba")
 #define MSG_BLTOUCH_RESET                   _UxGT("Reiniciar BLTouch")

Marlin/src/lcd/language/language_eu.h

 #define MSG_FILAMENTUNLOAD                  _UxGT("Harizpia deskargatu")
 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("Erabat deskargatu")
 #define MSG_INIT_SDCARD                     _UxGT("Hasieratu SD-a")
-#define MSG_CNG_SDCARD                      _UxGT("Aldatu txartela")
+#define MSG_CHANGE_SDCARD                   _UxGT("Aldatu txartela")
 #define MSG_ZPROBE_OUT                      _UxGT("Z zunda kanpora")
 #define MSG_SKEW_FACTOR                     _UxGT("Okertze faktorea")
 #define MSG_BLTOUCH                         _UxGT("BLTouch")

Marlin/src/lcd/language/language_fi.h

 #define MSG_AUTORETRACT                     _UxGT("AutoVeto.")
 #define MSG_FILAMENTCHANGE                  _UxGT("Change filament")
 #define MSG_INIT_SDCARD                     _UxGT("Init. SD-Card")
-#define MSG_CNG_SDCARD                      _UxGT("Change SD-Card")
+#define MSG_CHANGE_SDCARD                   _UxGT("Change SD-Card")
 #define MSG_ZPROBE_OUT                      _UxGT("Z probe out. bed")
 #define MSG_HOME                            _UxGT("Home")  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
 #define MSG_FIRST                           _UxGT("first")

Marlin/src/lcd/language/language_fr.h

 #define MSG_FILAMENTUNLOAD                  _UxGT("Décharger fil.")
 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("Décharger tout")
 #define MSG_INIT_SDCARD                     _UxGT("Init. la carte SD")
-#define MSG_CNG_SDCARD                      _UxGT("Changer de carte")
+#define MSG_CHANGE_SDCARD                   _UxGT("Changer de carte")
 #define MSG_ZPROBE_OUT                      _UxGT("Z sonde hors lit")
 #define MSG_SKEW_FACTOR                     _UxGT("Facteur écart")
 #define MSG_BLTOUCH                         _UxGT("BLTouch")

Marlin/src/lcd/language/language_gl.h

 #define MSG_AUTORETRACT                     _UxGT("Retraccion auto.")
 #define MSG_FILAMENTCHANGE                  _UxGT("Cambiar filamen.")
 #define MSG_INIT_SDCARD                     _UxGT("Iniciando SD")
-#define MSG_CNG_SDCARD                      _UxGT("Cambiar SD")
+#define MSG_CHANGE_SDCARD                   _UxGT("Cambiar SD")
 #define MSG_ZPROBE_OUT                      _UxGT("Sonda-Z sen cama")
 #define MSG_HOME                            _UxGT("Home")  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
 #define MSG_BLTOUCH_SELFTEST                _UxGT("Comprobar BLTouch")

Marlin/src/lcd/language/language_hr.h

 #define MSG_AUTORETRACT                     _UxGT("AutoRetr.")
 #define MSG_FILAMENTCHANGE                  _UxGT("Promijeni filament")
 #define MSG_INIT_SDCARD                     _UxGT("Init. SD karticu")
-#define MSG_CNG_SDCARD                      _UxGT("Promijeni SD karticu")
+#define MSG_CHANGE_SDCARD                   _UxGT("Promijeni SD karticu")
 #define MSG_ZPROBE_OUT                      _UxGT("Z probe out. bed")
 #define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Self-Test")
 #define MSG_BLTOUCH_RESET                   _UxGT("Reset BLTouch")

Marlin/src/lcd/language/language_it.h

 #define MSG_FILAMENTUNLOAD                  _UxGT("Rimuovi filamento")
 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("Rimuovi tutto")
 #define MSG_INIT_SDCARD                     _UxGT("Iniz. SD-Card")
-#define MSG_CNG_SDCARD                      _UxGT("Cambia SD-Card")
+#define MSG_CHANGE_SDCARD                   _UxGT("Cambia SD-Card")
 #define MSG_ZPROBE_OUT                      _UxGT("Z probe fuori piatto")
 #define MSG_SKEW_FACTOR                     _UxGT("Fattore distorsione")
 #define MSG_BLTOUCH                         _UxGT("BLTouch")

Marlin/src/lcd/language/language_jp-kana.h

 #define MSG_AUTORETRACT                     _UxGT("ジドウヒキコミ")                 // "AutoRetr."
 #define MSG_FILAMENTCHANGE                  _UxGT("フィラメントコウカン")              // "Change filament"
 #define MSG_INIT_SDCARD                     _UxGT("SDカードサイヨミコミ")             // "Init. SD card"
-#define MSG_CNG_SDCARD                      _UxGT("SDカードコウカン")               // "Change SD card"
+#define MSG_CHANGE_SDCARD                   _UxGT("SDカードコウカン")               // "Change SD card"
 #define MSG_ZPROBE_OUT                      _UxGT("Zプローブ ベッドガイ")            // "Z probe out. bed"
 #define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch ジコシンダン")          // "BLTouch Self-Test"
 #define MSG_BLTOUCH_RESET                   _UxGT("BLTouch リセット")             // "Reset BLTouch"

Marlin/src/lcd/language/language_ko_KR.h

 #define MSG_FILAMENTUNLOAD                  _UxGT("Unload filament")
 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("Unload All")
 #define MSG_INIT_SDCARD                     _UxGT("Init. SD card")
-#define MSG_CNG_SDCARD                      _UxGT("Change SD card")
+#define MSG_CHANGE_SDCARD                   _UxGT("Change SD card")
 #define MSG_ZPROBE_OUT                      _UxGT("Z Probe past bed")
 #define MSG_SKEW_FACTOR                     _UxGT("Skew Factor")
 #define MSG_BLTOUCH                         _UxGT("BLTouch")

Marlin/src/lcd/language/language_nl.h

 #define MSG_AUTORETRACT                     _UxGT("AutoRetr.")
 #define MSG_FILAMENTCHANGE                  _UxGT("Verv. Filament")
 #define MSG_INIT_SDCARD                     _UxGT("Init. SD kaart")
-#define MSG_CNG_SDCARD                      _UxGT("Verv. SD Kaart")
+#define MSG_CHANGE_SDCARD                   _UxGT("Verv. SD Kaart")
 #define MSG_ZPROBE_OUT                      _UxGT("Z probe uit. bed")
 #define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Zelf-Test")
 #define MSG_BLTOUCH_RESET                   _UxGT("Reset BLTouch")

Marlin/src/lcd/language/language_pl.h

 #define MSG_AUTORETRACT                     _UxGT("Auto. wycofanie")
 #define MSG_FILAMENTCHANGE                  _UxGT("Zmień filament")
 #define MSG_INIT_SDCARD                     _UxGT("Inicjal. karty SD")
-#define MSG_CNG_SDCARD                      _UxGT("Zmiana karty SD")
+#define MSG_CHANGE_SDCARD                   _UxGT("Zmiana karty SD")
 #define MSG_ZPROBE_OUT                      _UxGT("Sonda Z za stołem")
 #define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Self-Test")
 #define MSG_BLTOUCH_RESET                   _UxGT("Reset BLTouch")

Marlin/src/lcd/language/language_pt-br.h

 #define MSG_AUTORETRACT                     _UxGT("Retração Automática")
 #define MSG_FILAMENTCHANGE                  _UxGT("Trocar Filamento")
 #define MSG_INIT_SDCARD                     _UxGT("Iniciar SD")
-#define MSG_CNG_SDCARD                      _UxGT("Trocar SD")
+#define MSG_CHANGE_SDCARD                   _UxGT("Trocar SD")
 #define MSG_ZPROBE_OUT                      _UxGT("Sonda fora da mesa")
 #define MSG_SKEW_FACTOR                     _UxGT("Fator de Cisalho")
 #define MSG_BLTOUCH                         _UxGT("BLTouch")

Marlin/src/lcd/language/language_pt.h

 #define MSG_AUTORETRACT                     _UxGT(" AutoRetr.")
 #define MSG_FILAMENTCHANGE                  _UxGT("Trocar filamento")
 #define MSG_INIT_SDCARD                     _UxGT("Inici. cartão SD")
-#define MSG_CNG_SDCARD                      _UxGT("Trocar cartão SD")
+#define MSG_CHANGE_SDCARD                   _UxGT("Trocar cartão SD")
 #define MSG_ZPROBE_OUT                      _UxGT("Sensor fora/base")
 #define MSG_HOME                            _UxGT("Home")  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
 #define MSG_FIRST                           _UxGT("first")

Marlin/src/lcd/language/language_ru.h

 #define MSG_FILAMENTUNLOAD                  _UxGT("Выгрузка филамента")
 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("Выгрузить всё")
 #define MSG_INIT_SDCARD                     _UxGT("Иниц. SD карту")
-#define MSG_CNG_SDCARD                      _UxGT("Сменить SD карту")
+#define MSG_CHANGE_SDCARD                   _UxGT("Сменить SD карту")
 #define MSG_ZPROBE_OUT                      _UxGT("Z датчик вне стола")
 #define MSG_SKEW_FACTOR                     _UxGT("Фактор наклона")
 #define MSG_BLTOUCH                         _UxGT("BLTouch")

Marlin/src/lcd/language/language_sk.h

 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("Vysunúť všetko")
 
 #define MSG_INIT_SDCARD                     _UxGT("Načítať SD kartu")
-#define MSG_CNG_SDCARD                      _UxGT("Vymeniť SD kartu")
+#define MSG_CHANGE_SDCARD                   _UxGT("Vymeniť SD kartu")
 #define MSG_ZPROBE_OUT                      _UxGT("Sonda Z mimo podl.")
 #define MSG_SKEW_FACTOR                     _UxGT("Faktor skosenia")
 #define MSG_BLTOUCH                         _UxGT("BLTouch")

Marlin/src/lcd/language/language_tr.h

 #define MSG_AUTORETRACT                     _UxGT("AutoRetr.")                                          // AutoRetr.
 #define MSG_FILAMENTCHANGE                  _UxGT("Filaman Değiştir")                                   // Filaman Değiştir
 #define MSG_INIT_SDCARD                     _UxGT("Init. SD")                                           // Init. SD
-#define MSG_CNG_SDCARD                      _UxGT("SD Değiştir")                                        // SD Değiştir
+#define MSG_CHANGE_SDCARD                   _UxGT("SD Değiştir")                                        // SD Değiştir
 #define MSG_ZPROBE_OUT                      _UxGT("Z Prob Açık. Tabla")                                 // Z Prob Açık. Tabla
 #define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Self-Test")                                  // BLTouch Self-Test
 #define MSG_BLTOUCH_RESET                   _UxGT("Sıfırla BLTouch")                                    // Sıfırla BLTouch

Marlin/src/lcd/language/language_uk.h

 #define MSG_STOPPED                         _UxGT("ЗУПИНЕНО. ")
 #define MSG_FILAMENTCHANGE                  _UxGT("Зміна волокна")
 #define MSG_INIT_SDCARD                     _UxGT("Старт SD картки")
-#define MSG_CNG_SDCARD                      _UxGT("Заміна SD карти")
+#define MSG_CHANGE_SDCARD                   _UxGT("Заміна SD карти")
 #define MSG_ZPROBE_OUT                      _UxGT("Z дет. не в межах")
 #define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Само-Тест")
 #define MSG_BLTOUCH_RESET                   _UxGT("Скинути BLTouch")

Marlin/src/lcd/language/language_zh_CN.h

 #define MSG_FILAMENTUNLOAD                  _UxGT("卸载丝料") // "Unload filament"
 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("卸载全部") // "Unload All"
 #define MSG_INIT_SDCARD                     _UxGT("初始化存储卡")  //"Init. SD card"
-#define MSG_CNG_SDCARD                      _UxGT("更换存储卡")  //"Change SD card"
+#define MSG_CHANGE_SDCARD                   _UxGT("更换存储卡")  //"Change SD card"
 #define MSG_ZPROBE_OUT                      _UxGT("Z探针在热床之外")  //"Z probe out. bed" Z probe is not within the physical limits
 #define MSG_SKEW_FACTOR                     _UxGT("偏斜因数") // "Skew Factor"
 #define MSG_BLTOUCH                         _UxGT("BLTouch")     // "BLTouch"

Marlin/src/lcd/language/language_zh_TW.h

 #define MSG_FILAMENTUNLOAD                  _UxGT("卸載絲料") // "Unload filament"
 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("卸載全部") // "Unload All"
 #define MSG_INIT_SDCARD                     _UxGT("初始化記憶卡")  //"Init. SD card"
-#define MSG_CNG_SDCARD                      _UxGT("更換記憶卡")  //"Change SD card"
+#define MSG_CHANGE_SDCARD                   _UxGT("更換記憶卡")  //"Change SD card"
 #define MSG_ZPROBE_OUT                      _UxGT("Z探針在熱床之外")  //"Z probe out. bed" Z probe is not within the physical limits
 #define MSG_SKEW_FACTOR                     _UxGT("偏斜因數") // "Skew Factor"
 #define MSG_BLTOUCH                         _UxGT("BLTouch")     // "BLTouch"

Marlin/src/lcd/ultralcd.cpp

         else {
           MENU_ITEM(submenu, MSG_CARD_MENU, lcd_sdcard_menu);
           #if !PIN_EXISTS(SD_DETECT)
-            MENU_ITEM(gcode, MSG_CNG_SDCARD, PSTR("M21"));  // SD-card changed by user
+            MENU_ITEM(gcode, MSG_CHANGE_SDCARD, PSTR("M21"));  // SD-card changed by user
           #endif
         }
       }