Added profile for RAMPS with 2 extruders and 1 fan.

	modified:   Marlin/Configuration.h
	modified:   Marlin/pins.h

Marlin/Configuration.h

 // 33 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Bed)
 // 34 = RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed)
 // 35 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Fan)
+// 36 = RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Fan)
 // 4  = Duemilanove w/ ATMega328P pin assignment
 // 5  = Gen6
 // 51 = Gen6 deluxe

Marlin/pins.h

 * Arduino Mega pin assignment
 *
 ****************************************************************************************/
-#if MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35 || MOTHERBOARD == 77 || MOTHERBOARD == 67 || MOTHERBOARD == 68
+#if MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35 || MOTHERBOARD == 36 || MOTHERBOARD == 77 || MOTHERBOARD == 67 || MOTHERBOARD == 68
 #define KNOWN_BOARD 1
 
 //////////////////FIX THIS//////////////
 // #define RAMPS_V_1_0
 
 
-#if MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35 || MOTHERBOARD == 77 || MOTHERBOARD == 67 || MOTHERBOARD == 68
+#if MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35 || MOTHERBOARD == 36 ||  MOTHERBOARD == 77 || MOTHERBOARD == 67 || MOTHERBOARD == 68
 
   #define LARGE_FLASH true
 
     #define FAN_PIN            4 // IO pin. Buffer needed
   #endif
 
-  #if MOTHERBOARD == 77
+  #if MOTHERBOARD == 77 || MOTHERBOARD == 36
     #define FAN_PIN            8
   #endif
 
     #define TEMP_2_PIN         -1   // ANALOG NUMBERING
   #endif
 
-  #if MOTHERBOARD == 35
+  #if MOTHERBOARD == 35 || MOTHERBOARD == 36
     #define HEATER_BED_PIN     -1    // NO BED
   #else
     #if MOTHERBOARD == 77