Decrease the needed nops to 1

by shitfing the left shift into the high phase.

```
2	cbi 0x2,1 ;set CLK                      //
1	in r18,__SREG__                         //1
1-3	sbrc r24,7                              //2-4
2	rjmp .L19                               //4
1	cli                  .L19:              //5
2	lds r25,258          lds r25,258        //7
1	andi r25,lo8(-2)     ori r25,lo8(1)     //8
2	sts 258,r25          sts 258,r25        //10
1	out __SREG__,r18     out __SREG__,r18   //11
2	.L3:                 rjmp .L3           //13     //2
2	sbi 0x2,1 ;reset CLK //                 //13-15  //2-4
1	lsl r24	 ;  val      //1
1	nop                  //2
2	cbi 0x2,1 ;set CLK   //4
...
```

Marlin/ultralcd_st7920_u8glib_rrd.h

 #include <U8glib.h>
 
 //set optimization so ARDUINO optimizes this file
-#pragma GCC push_options
 #pragma GCC optimize (3)
 
 #define DELAY_0_NOP  ;
     #define ST7920_DELAY_2 DELAY_0_NOP
   #endif
   #ifndef ST7920_DELAY_3
-    #define ST7920_DELAY_3 DELAY_2_NOP
+    #define ST7920_DELAY_3 DELAY_1_NOP
   #endif
-#elif MOTHERBOARD == BOARD_3DRAG
+#elif (MOTHERBOARD == BOARD_3DRAG) || (MOTHERBOARD == BOARD_K8200)
   #ifndef ST7920_DELAY_1
     #define ST7920_DELAY_1 DELAY_0_NOP
   #endif
     #define ST7920_DELAY_2 DELAY_0_NOP
   #endif
   #ifndef ST7920_DELAY_3
-    #define ST7920_DELAY_3 DELAY_2_NOP
+    #define ST7920_DELAY_3 DELAY_1_NOP
   #endif
 #elif F_CPU == 16000000
   #ifndef ST7920_DELAY_1
     #define ST7920_DELAY_2 DELAY_0_NOP
   #endif
   #ifndef ST7920_DELAY_3
-    #define ST7920_DELAY_3 DELAY_2_NOP
+    #define ST7920_DELAY_3 DELAY_1_NOP
   #endif
 #else
   #error "No valid condition for delays in 'ultralcd_st7920_u8glib_rrd.h'"
     WRITE(ST7920_CLK_PIN,0);
     ST7920_DELAY_1
     WRITE(ST7920_DAT_PIN,val&0x80);
-    val<<=1;
     ST7920_DELAY_2
     WRITE(ST7920_CLK_PIN,1);
+    val<<=1;
     ST7920_DELAY_3
 
     WRITE(ST7920_CLK_PIN,0);
     ST7920_DELAY_1
     WRITE(ST7920_DAT_PIN,val&0x80);
-    val<<=1;
     ST7920_DELAY_2
     WRITE(ST7920_CLK_PIN,1);
+    val<<=1;
     ST7920_DELAY_3
 
     WRITE(ST7920_CLK_PIN,0);
     ST7920_DELAY_1
     WRITE(ST7920_DAT_PIN,val&0x80);
-    val<<=1;
     ST7920_DELAY_2
     WRITE(ST7920_CLK_PIN,1);
+    val<<=1;
     ST7920_DELAY_3
 
     WRITE(ST7920_CLK_PIN,0);
     ST7920_DELAY_1
     WRITE(ST7920_DAT_PIN,val&0x80);
-    val<<=1;
     ST7920_DELAY_2
     WRITE(ST7920_CLK_PIN,1);
+    val<<=1;
     ST7920_DELAY_3
 
     WRITE(ST7920_CLK_PIN,0);
     ST7920_DELAY_1
     WRITE(ST7920_DAT_PIN,val&0x80);
-    val<<=1;
     ST7920_DELAY_2
     WRITE(ST7920_CLK_PIN,1);
+    val<<=1;
     ST7920_DELAY_3
 
     WRITE(ST7920_CLK_PIN,0);
     ST7920_DELAY_1
     WRITE(ST7920_DAT_PIN,val&0x80);
-    val<<=1;
     ST7920_DELAY_2
     WRITE(ST7920_CLK_PIN,1);
+    val<<=1;
     ST7920_DELAY_3
 
     WRITE(ST7920_CLK_PIN,0);
     ST7920_DELAY_1
     WRITE(ST7920_DAT_PIN,val&0x80);
-    val<<=1;
     ST7920_DELAY_2
     WRITE(ST7920_CLK_PIN,1);
+    val<<=1;
     ST7920_DELAY_3
 
     WRITE(ST7920_CLK_PIN,0);
     ST7920_DELAY_1
     WRITE(ST7920_DAT_PIN,val&0x80);
-    val<<=1;
     ST7920_DELAY_2
     WRITE(ST7920_CLK_PIN,1);
 }
   U8GLIB_ST7920_128X64_RRD(uint8_t dummy) : U8GLIB(&u8g_dev_st7920_128x64_rrd_sw_spi) { UNUSED(dummy); }
 };
 
-#pragma GCC pop_options
+#pragma GCC reset_options
 
 #endif //U8GLIB_ST7920
 #endif //ULCDST7920_H