Remove filament-change empty lines from languages

Marlin/language_bg.h

 #define MSG_DRIVE_STRENGTH                  "Drive Strength"
 #define MSG_DAC_PERCENT                     "Driver %"
 #define MSG_DAC_EEPROM_WRITE                "DAC EEPROM Write"
+
 #define MSG_FILAMENT_CHANGE_HEADER          "CHANGE FILAMENT"
 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   "CHANGE OPTIONS:"
 #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  "Extrude more"
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   "Resume print"
+
 #if LCD_HEIGHT >= 4
+  // Up to 3 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          "Wait for start"
   #define MSG_FILAMENT_CHANGE_INIT_2          "of the filament"
   #define MSG_FILAMENT_CHANGE_INIT_3          "change"
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Wait for"
   #define MSG_FILAMENT_CHANGE_UNLOAD_2        "filament unload"
-  #define MSG_FILAMENT_CHANGE_UNLOAD_3        ""
   #define MSG_FILAMENT_CHANGE_INSERT_1        "Insert filament"
   #define MSG_FILAMENT_CHANGE_INSERT_2        "and press button"
   #define MSG_FILAMENT_CHANGE_INSERT_3        "to continue..."
   #define MSG_FILAMENT_CHANGE_LOAD_1          "Wait for"
   #define MSG_FILAMENT_CHANGE_LOAD_2          "filament load"
-  #define MSG_FILAMENT_CHANGE_LOAD_3          ""
   #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Wait for"
   #define MSG_FILAMENT_CHANGE_EXTRUDE_2       "filament extrude"
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_3       ""
   #define MSG_FILAMENT_CHANGE_RESUME_1        "Wait for print"
   #define MSG_FILAMENT_CHANGE_RESUME_2        "to resume"
-  #define MSG_FILAMENT_CHANGE_RESUME_3        ""
 #else // LCD_HEIGHT < 4
+  // Up to 2 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          "Please wait..."
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Ejecting..."
   #define MSG_FILAMENT_CHANGE_INSERT_1        "Insert and Click"

Marlin/language_cz.h

 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   "CO DAL?"
 #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  "Jeste vytlacit"
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   "Obnovit tisk"
+
 #if LCD_HEIGHT >= 4
+  // Up to 3 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          "Cekejte prosim"
   #define MSG_FILAMENT_CHANGE_INIT_2          "na zahajeni"
   #define MSG_FILAMENT_CHANGE_INIT_3          "vymeny filamentu"
   #define MSG_FILAMENT_CHANGE_RESUME_2        "na pokracovani"
   #define MSG_FILAMENT_CHANGE_RESUME_3        "tisku"
 #else // LCD_HEIGHT < 4
+  // Up to 2 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          "Cekejte..."
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Vysouvani..."
   #define MSG_FILAMENT_CHANGE_INSERT_1        "Vlozte, kliknete"

Marlin/language_da.h

 #define MSG_DRIVE_STRENGTH                  "Driv Styrke"
 #define MSG_DAC_PERCENT                     "Driv %"
 #define MSG_DAC_EEPROM_WRITE                "DAC EEPROM Skriv"
+
 #define MSG_FILAMENT_CHANGE_HEADER          "SKIFT FILAMENT"
 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   "Skift muligheder:"
 #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  "Extruder mere"

Marlin/language_de.h

 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   "Drucke weiter"
 
 #if LCD_HEIGHT >= 4
+  // Up to 3 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          "Warte auf den"
   #define MSG_FILAMENT_CHANGE_INIT_2          "Start des "
   #define MSG_FILAMENT_CHANGE_INIT_3          "Filamentwechsels"
   #define MSG_FILAMENT_CHANGE_RESUME_2        "Fortsetzung des"
   #define MSG_FILAMENT_CHANGE_RESUME_3        "Druckes"
 #else // LCD_HEIGHT < 4
+  // Up to 2 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          "Bitte warten..."
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Auswerfen..."
   #define MSG_FILAMENT_CHANGE_INSERT_1        "Laden und Klick"

Marlin/language_el.h

 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   "Resume print"
 
 #if LCD_HEIGHT >= 4
-  #define MSG_FILAMENT_CHANGE_INIT_1        "Wait for start"
-  #define MSG_FILAMENT_CHANGE_INIT_2        "of the filament"
-  #define MSG_FILAMENT_CHANGE_INIT_3        "change"
-  #define MSG_FILAMENT_CHANGE_UNLOAD_1      "Wait for"
-  #define MSG_FILAMENT_CHANGE_UNLOAD_2      "filament unload"
-  #define MSG_FILAMENT_CHANGE_UNLOAD_3      ""
-  #define MSG_FILAMENT_CHANGE_INSERT_1      "Insert filament"
-  #define MSG_FILAMENT_CHANGE_INSERT_2      "and press button"
-  #define MSG_FILAMENT_CHANGE_INSERT_3      "to continue..."
-  #define MSG_FILAMENT_CHANGE_LOAD_1        "Wait for"
-  #define MSG_FILAMENT_CHANGE_LOAD_2        "filament load"
-  #define MSG_FILAMENT_CHANGE_LOAD_3        ""
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1     "Wait for"
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2     "filament extrude"
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_3     ""
-  #define MSG_FILAMENT_CHANGE_RESUME_1      "Wait for print"
-  #define MSG_FILAMENT_CHANGE_RESUME_2      "to resume"
-  #define MSG_FILAMENT_CHANGE_RESUME_3      ""
+  // Up to 3 lines allowed
+  #define MSG_FILAMENT_CHANGE_INIT_1          "Wait for start"
+  #define MSG_FILAMENT_CHANGE_INIT_2          "of the filament"
+  #define MSG_FILAMENT_CHANGE_INIT_3          "change"
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Wait for"
+  #define MSG_FILAMENT_CHANGE_UNLOAD_2        "filament unload"
+  #define MSG_FILAMENT_CHANGE_INSERT_1        "Insert filament"
+  #define MSG_FILAMENT_CHANGE_INSERT_2        "and press button"
+  #define MSG_FILAMENT_CHANGE_INSERT_3        "to continue..."
+  #define MSG_FILAMENT_CHANGE_LOAD_1          "Wait for"
+  #define MSG_FILAMENT_CHANGE_LOAD_2          "filament load"
+  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Wait for"
+  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       "filament extrude"
+  #define MSG_FILAMENT_CHANGE_RESUME_1        "Wait for print"
+  #define MSG_FILAMENT_CHANGE_RESUME_2        "to resume"
 #else // LCD_HEIGHT < 4
-  #define MSG_FILAMENT_CHANGE_INIT_1        "Please wait..."
-  #define MSG_FILAMENT_CHANGE_UNLOAD_1      "Ejecting..."
-  #define MSG_FILAMENT_CHANGE_INSERT_1      "Insert and Click"
-  #define MSG_FILAMENT_CHANGE_LOAD_1        "Loading..."
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1     "Extruding..."
-  #define MSG_FILAMENT_CHANGE_RESUME_1      "Resuming..."
+  // Up to 2 lines allowed
+  #define MSG_FILAMENT_CHANGE_INIT_1          "Please wait..."
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Ejecting..."
+  #define MSG_FILAMENT_CHANGE_INSERT_1        "Insert and Click"
+  #define MSG_FILAMENT_CHANGE_LOAD_1          "Loading..."
+  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Extruding..."
+  #define MSG_FILAMENT_CHANGE_RESUME_1        "Resuming..."
 #endif
 
 #endif // LANGUAGE_EL_H

Marlin/language_es.h

 #define MSG_INFO_MIN_TEMP                   "Temperatura minima"
 #define MSG_INFO_MAX_TEMP                   "Temperatura maxima"
 #define MSG_INFO_PSU                        "Fuente de poder"
+
 #define MSG_FILAMENT_CHANGE_HEADER          "Cambiar Filamento"
 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   "Opciones de cambio:"
 #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  "Extruir mas"
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   "Resumir imp."
+
 #define MSG_FILAMENT_CHANGE_INIT_1          "Esperando iniciar"
-#define MSG_FILAMENT_CHANGE_INIT_2          "del filamento"
-#define MSG_FILAMENT_CHANGE_INIT_3          "cambiar"
-#define MSG_FILAMENT_CHANGE_UNLOAD_1        "Esperado por"
-#define MSG_FILAMENT_CHANGE_UNLOAD_2        "filamento expulsado"
-#define MSG_FILAMENT_CHANGE_UNLOAD_3        ""
+
 #define MSG_FILAMENT_CHANGE_INSERT_1        "Inserte filamento"
 #define MSG_FILAMENT_CHANGE_INSERT_2        "y presione el boton"
-#define MSG_FILAMENT_CHANGE_INSERT_3        "para continuar..."
+
+#if LCD_HEIGHT >= 4
+  // Up to 3 lines allowed
+  #define MSG_FILAMENT_CHANGE_INIT_2          "del filamento"
+  #define MSG_FILAMENT_CHANGE_INIT_3          "cambiar"
+  #define MSG_FILAMENT_CHANGE_INSERT_3        "para continuar..."
+#else // LCD_HEIGHT < 4
+  // Up to 2 lines allowed
+  #define MSG_FILAMENT_CHANGE_INIT_2          "del fil. cambiar"
+  #define MSG_FILAMENT_CHANGE_INSERT_1        "Inserte filamento"
+#endif // LCD_HEIGHT < 4
+
+#define MSG_FILAMENT_CHANGE_UNLOAD_1        "Esperado por"
+#define MSG_FILAMENT_CHANGE_UNLOAD_2        "filamento expulsado"
 #define MSG_FILAMENT_CHANGE_LOAD_1          "Esperado por"
 #define MSG_FILAMENT_CHANGE_LOAD_2          "Cargar filamento"
-#define MSG_FILAMENT_CHANGE_LOAD_3          ""
 #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Esperado por"
 #define MSG_FILAMENT_CHANGE_EXTRUDE_2       "Extruir filamento"
-#define MSG_FILAMENT_CHANGE_EXTRUDE_3       ""
 #define MSG_FILAMENT_CHANGE_RESUME_1        "Esperando imp."
 #define MSG_FILAMENT_CHANGE_RESUME_2        "para resumir"
-#define MSG_FILAMENT_CHANGE_RESUME_3        ""
 
 #endif // LANGUAGE_ES_H

Marlin/language_fr.h

 #define MSG_DRIVE_STRENGTH                  "Puiss. moteur "
 #define MSG_DAC_PERCENT                     "Driver %"
 #define MSG_DAC_EEPROM_WRITE                "DAC EEPROM sauv."
+
 #define MSG_FILAMENT_CHANGE_HEADER          "CHANGER FILAMENT"
 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   "CHANGER OPTIONS:"
 #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  "+ extrusion"
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   "Reprendre impr."
 
 #if LCD_HEIGHT >= 4
-    #define MSG_FILAMENT_CHANGE_INIT_1          "Attente Demarrage"
-    #define MSG_FILAMENT_CHANGE_INIT_2          "du filament"
-    #define MSG_FILAMENT_CHANGE_INIT_3          "changer"
-    #define MSG_FILAMENT_CHANGE_UNLOAD_1        "attente de"
-    #define MSG_FILAMENT_CHANGE_UNLOAD_2        "decharger filament"
-    #define MSG_FILAMENT_CHANGE_UNLOAD_3        ""
-    #define MSG_FILAMENT_CHANGE_INSERT_1        "inserer filament"
-    #define MSG_FILAMENT_CHANGE_INSERT_2        "et app. bouton"
-    #define MSG_FILAMENT_CHANGE_INSERT_3        "pour continuer..."
-    #define MSG_FILAMENT_CHANGE_LOAD_1          "attente de"
-    #define MSG_FILAMENT_CHANGE_LOAD_2          "charger filament"
-    #define MSG_FILAMENT_CHANGE_LOAD_3          ""
-    #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "attente de"
-    #define MSG_FILAMENT_CHANGE_EXTRUDE_2       "extrusion fil."
-    #define MSG_FILAMENT_CHANGE_EXTRUDE_3       ""
-    #define MSG_FILAMENT_CHANGE_RESUME_1        "attente impression"
-    #define MSG_FILAMENT_CHANGE_RESUME_2        "pour reprendre"
-    #define MSG_FILAMENT_CHANGE_RESUME_3        ""
+  // Up to 3 lines allowed
+  #define MSG_FILAMENT_CHANGE_INIT_1          "Attente Demarrage"
+  #define MSG_FILAMENT_CHANGE_INIT_2          "du filament"
+  #define MSG_FILAMENT_CHANGE_INIT_3          "changer"
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1        "attente de"
+  #define MSG_FILAMENT_CHANGE_UNLOAD_2        "decharger filament"
+  #define MSG_FILAMENT_CHANGE_INSERT_1        "inserer filament"
+  #define MSG_FILAMENT_CHANGE_INSERT_2        "et app. bouton"
+  #define MSG_FILAMENT_CHANGE_INSERT_3        "pour continuer..."
+  #define MSG_FILAMENT_CHANGE_LOAD_1          "attente de"
+  #define MSG_FILAMENT_CHANGE_LOAD_2          "charger filament"
+  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "attente de"
+  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       "extrusion fil."
+  #define MSG_FILAMENT_CHANGE_RESUME_1        "attente impression"
+  #define MSG_FILAMENT_CHANGE_RESUME_2        "pour reprendre"
 #else // LCD_HEIGHT < 4
-    #define MSG_FILAMENT_CHANGE_INIT_1          "Patientez..."
-    #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Ejection..."
-    #define MSG_FILAMENT_CHANGE_INSERT_1        "Inserer et click"
-    #define MSG_FILAMENT_CHANGE_LOAD_1          "Chargement..."
-    #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Extrusion..."
-    #define MSG_FILAMENT_CHANGE_RESUME_1        "Reprise..."
+  // Up to 2 lines allowed
+  #define MSG_FILAMENT_CHANGE_INIT_1          "Patientez..."
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Ejection..."
+  #define MSG_FILAMENT_CHANGE_INSERT_1        "Inserer et click"
+  #define MSG_FILAMENT_CHANGE_LOAD_1          "Chargement..."
+  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Extrusion..."
+  #define MSG_FILAMENT_CHANGE_RESUME_1        "Reprise..."
 #endif // LCD_HEIGHT < 4
 
 #endif // LANGUAGE_FR_H

Marlin/language_gl.h

 #define MSG_DRIVE_STRENGTH                  "Potencia motor"
 #define MSG_DAC_PERCENT                     "Motor %"
 #define MSG_DAC_EEPROM_WRITE                "Garda DAC EEPROM"
+
 #define MSG_FILAMENT_CHANGE_HEADER          "TROCO FILAMENTO"
 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   "OPCIONS TROCO:"
 #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  "Extruir mais"
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   "Segue traballo"
+
 #if LCD_HEIGHT >= 4
+  // Up to 3 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          "Agarde para"
   #define MSG_FILAMENT_CHANGE_INIT_2          "iniciar troco"
   #define MSG_FILAMENT_CHANGE_INIT_3          "de filamento"
   #define MSG_FILAMENT_CHANGE_RESUME_2        "seguir co"
   #define MSG_FILAMENT_CHANGE_RESUME_3        "traballo"
 #else // LCD_HEIGHT < 4
+  // Up to 2 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          "Agarde..."
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Descargando..."
   #define MSG_FILAMENT_CHANGE_INSERT_1        "Introduza e click"

Marlin/language_hr.h

 #define MSG_DRIVE_STRENGTH                  "Drive Strength"
 #define MSG_DAC_PERCENT                     "Driver %"
 #define MSG_DAC_EEPROM_WRITE                "DAC EEPROM Write"
+
 #define MSG_FILAMENT_CHANGE_HEADER          "CHANGE FILAMENT"
 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   "CHANGE OPTIONS:"
 #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  "Extrudiraj više"
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   "Nastavi print"
 
 #if LCD_HEIGHT >= 4
+  // Up to 3 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          "Čekaj početak"
   #define MSG_FILAMENT_CHANGE_INIT_2          "filamenta"
   #define MSG_FILAMENT_CHANGE_INIT_3          "promijeni"
   #define MSG_FILAMENT_CHANGE_RESUME_1        "Wait for print"
   #define MSG_FILAMENT_CHANGE_RESUME_2        "to resume"
 #else // LCD_HEIGHT < 4
+  // Up to 2 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          "Pričekaj..."
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Ejecting..."
   #define MSG_FILAMENT_CHANGE_INSERT_1        "Insert and Click"

Marlin/language_it.h

 #define MSG_DRIVE_STRENGTH                  "Potenza Drive"
 #define MSG_DAC_PERCENT                     "Driver %"
 #define MSG_DAC_EEPROM_WRITE                "Scrivi DAC EEPROM"
+
 #define MSG_FILAMENT_CHANGE_HEADER          "CAMBIA FILAMENTO"
 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   "CAMBIA OPZIONI:"
 #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  "Estrusione"
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   "Riprendi stampa"
+
 #if LCD_HEIGHT >= 4
+  // Up to 3 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          "Attendere avvio"
   #define MSG_FILAMENT_CHANGE_INIT_2          "del cambio"
   #define MSG_FILAMENT_CHANGE_INIT_3          "di filamento"
   #define MSG_FILAMENT_CHANGE_RESUME_2        "la ripresa"
   #define MSG_FILAMENT_CHANGE_RESUME_3        "della stampa"
 #else // LCD_HEIGHT < 4
+  // Up to 2 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          "Attendere..."
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Espulsione..."
   #define MSG_FILAMENT_CHANGE_INSERT_1        "Inserisci e premi"

Marlin/language_kana.h

 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   "\xc4\xde\xb3\xbb\xa6\xbe\xdd\xc0\xb8\xbc\xc3\xb8\xc0\xde\xbb\xb2" // "ﾄﾞｳｻｦｾﾝﾀｸｼﾃｸﾀﾞｻｲ" ("CHANGE OPTIONS:")
 #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  "\xbb\xd7\xc6\xb5\xbc\xc0\xde\xbd"                                 // "ｻﾗﾆｵｼﾀﾞｽ" ("Extrude more")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   "\xcc\xdf\xd8\xdd\xc4\xbb\xb2\xb6\xb2"                             // "ﾌﾟﾘﾝﾄｻｲｶｲ" ("Resume print")
+
 #if LCD_HEIGHT >= 4
+  // Up to 3 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1        "\xba\xb3\xb6\xdd\xa6\xb6\xb2\xbc\xbc\xcf\xbd"                     // "ｺｳｶﾝｦｶｲｼｼﾏｽ" ("Wait for start")
   #define MSG_FILAMENT_CHANGE_INIT_2        "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2"             // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("of the filament")
-  #define MSG_FILAMENT_CHANGE_INIT_3        ""                                                                 // "" ("change")
   #define MSG_FILAMENT_CHANGE_UNLOAD_1      "\xcc\xa8\xd7\xd2\xdd\xc4\xc7\xb7\xc0\xde\xbc\xc1\xad\xb3"         // "ﾌｨﾗﾒﾝﾄﾇｷﾀﾞｼﾁｭｳ" ("Wait for")
   #define MSG_FILAMENT_CHANGE_UNLOAD_2      "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2"             // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("filament unload")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_3      ""
   #define MSG_FILAMENT_CHANGE_INSERT_1      "\xcc\xa8\xd7\xd2\xdd\xc4\xa6\xbf\xb3\xc6\xad\xb3\xbc,"            // "ﾌｨﾗﾒﾝﾄｦｿｳﾆｭｳｼ," ("Insert filament")
   #define MSG_FILAMENT_CHANGE_INSERT_2      "\xb8\xd8\xaf\xb8\xbd\xd9\xc4\xbf\xde\xaf\xba\xb3\xbc\xcf\xbd"     // "ｸﾘｯｸｽﾙﾄｿﾞｯｺｳｼﾏｽ" ("and press button")
-  #define MSG_FILAMENT_CHANGE_INSERT_3      ""                                                                 // "" ("to continue...")
   #define MSG_FILAMENT_CHANGE_LOAD_1        "\xcc\xa8\xd7\xd2\xdd\xc4\xbf\xb3\xc3\xdd\xc1\xad\xb3"             // "ﾌｨﾗﾒﾝﾄｿｳﾃﾝﾁｭｳ" ("Wait for")
   #define MSG_FILAMENT_CHANGE_LOAD_2        "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2"             // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("filament load")
-  #define MSG_FILAMENT_CHANGE_LOAD_3        ""
   #define MSG_FILAMENT_CHANGE_EXTRUDE_1     "\xcc\xa8\xd7\xd2\xdd\xc4\xb5\xbc\xc0\xde\xbc\xc1\xad\xb3"         // "ﾌｨﾗﾒﾝﾄｵｼﾀﾞｼﾁｭｳ" ("Wait for")
   #define MSG_FILAMENT_CHANGE_EXTRUDE_2     "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2"             // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("filament extrude")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_3     ""
   #define MSG_FILAMENT_CHANGE_RESUME_1      "\xcc\xdf\xd8\xdd\xc4\xa6\xbb\xb2\xb6\xb2\xbc\xcf\xbd"             // "ﾌﾟﾘﾝﾄｦｻｲｶｲｼﾏｽ" ("Wait for print")
   #define MSG_FILAMENT_CHANGE_RESUME_2      "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2"             // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("to resume")
-  #define MSG_FILAMENT_CHANGE_RESUME_3      ""
 #else // LCD_HEIGHT < 4
+  // Up to 2 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1        "\xba\xb3\xb6\xdd\xa6\xb6\xb2\xbc\xbc\xcf\xbd"                     // "ｺｳｶﾝｦｶｲｼｼﾏｽ" ("Please wait...")
   #define MSG_FILAMENT_CHANGE_UNLOAD_1      "\xcc\xa8\xd7\xd2\xdd\xc4\xc7\xb7\xc0\xde\xbc\xc1\xad\xb3"         // "ﾌｨﾗﾒﾝﾄﾇｷﾀﾞｼﾁｭｳ" ("Ejecting...")
   #if LCD_WIDTH >= 20

Marlin/language_kana_utf8.h

 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   "プリントサイカイ"                // "Resume print"
 #define MSG_FILAMENT_CHANGE_INIT_1          "コウカンヲカイシシマス"            // "Wait for start"
 #define MSG_FILAMENT_CHANGE_INIT_2          "シバラクオマチクダサイ"            // "of the filament"
-#define MSG_FILAMENT_CHANGE_INIT_3          ""                           // "change"
 #define MSG_FILAMENT_CHANGE_UNLOAD_1        "フィラメントヌキダシチュウ"          // "Wait for"
 #define MSG_FILAMENT_CHANGE_UNLOAD_2        "シバラクオマチクダサイ"            // "filament unload"
-#define MSG_FILAMENT_CHANGE_UNLOAD_3        ""
 #define MSG_FILAMENT_CHANGE_INSERT_1        "フィラメントヲソウニュウシ,"         // "Insert filament"
 #define MSG_FILAMENT_CHANGE_INSERT_2        "クリックスルトゾッコウシマス"         // "and press button"
-#define MSG_FILAMENT_CHANGE_INSERT_3        ""                           // "to continue..."
 #define MSG_FILAMENT_CHANGE_LOAD_1          "フィラメントソウテンチュウ"          // "Wait for"
 #define MSG_FILAMENT_CHANGE_LOAD_2          "シバラクオマチクダサイ"            // "filament load"
-#define MSG_FILAMENT_CHANGE_LOAD_3          ""
 #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "フィラメントオシダシチュウ"          // "Wait for"
 #define MSG_FILAMENT_CHANGE_EXTRUDE_2       "シバラクオマチクダサイ"            // "filament extrude"
-#define MSG_FILAMENT_CHANGE_EXTRUDE_3       ""
 #define MSG_FILAMENT_CHANGE_RESUME_1        "プリントヲサイカイシマス"           // "Wait for print"
 #define MSG_FILAMENT_CHANGE_RESUME_2        "シバラクオマチクダサイ"            // "to resume"
-#define MSG_FILAMENT_CHANGE_RESUME_3        ""
 
 #endif // LANGUAGE_KANA_UTF_H

Marlin/language_pl.h

 #define MSG_DRIVE_STRENGTH                  "Siła silnika"
 #define MSG_DAC_PERCENT                     "Siła %"
 #define MSG_DAC_EEPROM_WRITE                "Zapisz DAC EEPROM"
+
 #define MSG_FILAMENT_CHANGE_HEADER          "ZMIEN FILAMENT"
 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   "ZMIEN OPCJE:"
 #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  "Ekstruduj wiecej"
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   "Wznow drukowanie"
+
 #if LCD_HEIGHT >= 4
+  // Up to 3 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          "Czekam na "
   #define MSG_FILAMENT_CHANGE_INIT_2          "zmiane filamentu"
-  #define MSG_FILAMENT_CHANGE_INIT_3          ""
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Czekam na"
   #define MSG_FILAMENT_CHANGE_UNLOAD_2        "wyjecie filamentu"
-  #define MSG_FILAMENT_CHANGE_UNLOAD_3        ""
   #define MSG_FILAMENT_CHANGE_INSERT_1        "Wloz filament"
   #define MSG_FILAMENT_CHANGE_INSERT_2        "i nacisnij przycisk"
   #define MSG_FILAMENT_CHANGE_INSERT_3        "aby kontynuowac..."
   #define MSG_FILAMENT_CHANGE_LOAD_1          "Czekam na"
   #define MSG_FILAMENT_CHANGE_LOAD_2          "wlozenie filamentu"
-  #define MSG_FILAMENT_CHANGE_LOAD_3          ""
   #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Czekam na"
   #define MSG_FILAMENT_CHANGE_EXTRUDE_2       "ekstruzje filamentu"
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_3       ""
   #define MSG_FILAMENT_CHANGE_RESUME_1        "Czekam na"
   #define MSG_FILAMENT_CHANGE_RESUME_2        "wznowienie druku"
-  #define MSG_FILAMENT_CHANGE_RESUME_3        ""
 #else // LCD_HEIGHT < 4
+  // Up to 2 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          "Prosze czekac..."
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Wysuwanie..."
   #define MSG_FILAMENT_CHANGE_INSERT_1        "Wloz i nacisnij prz."

Marlin/language_tr.h

 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   "Se\xe7enekler:"                                             //Seçenekler:
 #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  "Daha Ak\xfdt"                                               //Daha Akıt
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   "Bask\xfdy\xfd s\xfcrd\xfcr"                                 //Baskıyı sürdür
+
 #if LCD_HEIGHT >= 4
+  // Up to 3 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          "Ba\xfelama bekleniyor"                                    //Başlama bekleniyor
   #define MSG_FILAMENT_CHANGE_INIT_2          "filaman\xfdn"                                             //filamanın
   #define MSG_FILAMENT_CHANGE_INIT_3          "de\xf0i\xfeimi"                                           //değişimi
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Bekleniyor"                                               //Bekleniyor
   #define MSG_FILAMENT_CHANGE_UNLOAD_2        "filaman\xfdn \xe7\xfdkmas\xfd"                            //filamanın çıkması
-  #define MSG_FILAMENT_CHANGE_UNLOAD_3        ""                                                         //
   #define MSG_FILAMENT_CHANGE_INSERT_1        "Filaman\xfd y\xfckle"                                     //Filamanı yükle
   #define MSG_FILAMENT_CHANGE_INSERT_2        "ve devam i\xe7in"                                         //ve devam için
   #define MSG_FILAMENT_CHANGE_INSERT_3        "tu\xfea bas..."                                           //tuşa bas...
   #define MSG_FILAMENT_CHANGE_LOAD_1          "Bekleniyor"                                               //Bekleniyor
   #define MSG_FILAMENT_CHANGE_LOAD_2          "filaman\xfdn y\xfcklenmesi"                               //filamanın yüklenmesi
-  #define MSG_FILAMENT_CHANGE_LOAD_3          ""                                                         //
   #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Bekleniyor"                                               //Bekleniyor
   #define MSG_FILAMENT_CHANGE_EXTRUDE_2       "filaman akmas\xfd"                                        //filaman akması
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_3       ""                                                         //
   #define MSG_FILAMENT_CHANGE_RESUME_1        "Bask\xfdn\xfdn s\xfcrd\xfcr\xfclmesini"                   //Baskının sürdürülmesini
   #define MSG_FILAMENT_CHANGE_RESUME_2        "bekle"                                                    //bekle
-  #define MSG_FILAMENT_CHANGE_RESUME_3        ""                                                         //
 #else // LCD_HEIGHT < 4
+  // Up to 2 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          "L\xfctfen bekleyiniz..."                                  //Lütfen bekleyiniz...
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        "\xc7\xfdkart\xfdl\xfdyor..."                              //Çıkartılıyor...
   #define MSG_FILAMENT_CHANGE_INSERT_1        "Y\xfckle ve bas"                                          //Yükle ve bas

Marlin/language_tr_utf8.h

 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   "Seçenekler:"                                                //Seçenekler:
 #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  "Daha Akıt"                                                  //Daha Akıt
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   "Baskıyı sürdür"                                             //Baskıyı sürdür
+
 #if LCD_HEIGHT >= 4
+  // Up to 3 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          "Başlama bekleniyor"                                       //Başlama bekleniyor
   #define MSG_FILAMENT_CHANGE_INIT_2          "filamanın"                                                //filamanın
   #define MSG_FILAMENT_CHANGE_INIT_3          "değişimi"                                                 //değişimi
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Bekleniyor"                                               //Bekleniyor
   #define MSG_FILAMENT_CHANGE_UNLOAD_2        "filamanın çıkması"                                        //filamanın çıkması
-  #define MSG_FILAMENT_CHANGE_UNLOAD_3        ""                                                         //
   #define MSG_FILAMENT_CHANGE_INSERT_1        "Filamanı yükle"                                           //Filamanı yükle
   #define MSG_FILAMENT_CHANGE_INSERT_2        "ve devam için"                                            //ve devam için
   #define MSG_FILAMENT_CHANGE_INSERT_3        "tuşa bas..."                                              //tuşa bas...
   #define MSG_FILAMENT_CHANGE_LOAD_1          "Bekleniyor"                                               //Bekleniyor
   #define MSG_FILAMENT_CHANGE_LOAD_2          "filamanın yüklenmesi"                                     //filamanın yüklenmesi
-  #define MSG_FILAMENT_CHANGE_LOAD_3          ""                                                         //
   #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Bekleniyor"                                               //Bekleniyor
   #define MSG_FILAMENT_CHANGE_EXTRUDE_2       "filaman akması"                                           //filaman akması
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_3       ""                                                         //
   #define MSG_FILAMENT_CHANGE_RESUME_1        "Baskının sürdürülmesini"                                  //Baskının sürdürülmesini
   #define MSG_FILAMENT_CHANGE_RESUME_2        "bekle"                                                    //bekle
-  #define MSG_FILAMENT_CHANGE_RESUME_3        ""                                                         //
 #else // LCD_HEIGHT < 4
+  // Up to 2 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          "Lütfen bekleyiniz..."                                     //Lütfen bekleyiniz...
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Çıkartılıyor..."                                          //Çıkartılıyor...
   #define MSG_FILAMENT_CHANGE_INSERT_1        "Yükle ve bas"                                             //Yükle ve bas

Marlin/language_uk.h

 #define MSG_DRIVE_STRENGTH                  "Сила мотору"
 #define MSG_DAC_PERCENT                     "% мотору"
 #define MSG_DAC_EEPROM_WRITE                "Запис ЦАП на ПЗП"
+
 #define MSG_FILAMENT_CHANGE_HEADER          "ЗАМІНА ВОЛОКНА"
 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   "НАЛАШТ. ЗАМІНИ:"
 #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  "Екструдувати"
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   "Відновити друк"
 
 #if LCD_HEIGHT >= 4
+  // Up to 3 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          "Зачекайте на"
   #define MSG_FILAMENT_CHANGE_INIT_2          "початок заміни"
   #define MSG_FILAMENT_CHANGE_INIT_3          "волокна"
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Зачекайте на"
   #define MSG_FILAMENT_CHANGE_UNLOAD_2        "вивід волокна"
-  #define MSG_FILAMENT_CHANGE_UNLOAD_3        ""
   #define MSG_FILAMENT_CHANGE_INSERT_1        "Вставте волокно"
   #define MSG_FILAMENT_CHANGE_INSERT_2        "та натисніть для"
   #define MSG_FILAMENT_CHANGE_INSERT_3        "продовження..."
   #define MSG_FILAMENT_CHANGE_LOAD_1          "Зачекайте на"
   #define MSG_FILAMENT_CHANGE_LOAD_2          "ввід волокна"
-  #define MSG_FILAMENT_CHANGE_LOAD_3          ""
   #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Зачекайте на"
   #define MSG_FILAMENT_CHANGE_EXTRUDE_2       "екструзію"
   #define MSG_FILAMENT_CHANGE_EXTRUDE_3       "волокна"
   #define MSG_FILAMENT_CHANGE_RESUME_2        "відновлення"
   #define MSG_FILAMENT_CHANGE_RESUME_3        "друку"
 #else // LCD_HEIGHT < 4
+  // Up to 2 lines allowed
   #define MSG_FILAMENT_CHANGE_INIT_1          "Зачекайте..."
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Вивід..."
   #define MSG_FILAMENT_CHANGE_INSERT_1        "Вставте і нат."