thomas
/
marlin
Beobachten 1
Favorisieren 0
Fork 0
Code Issues 0 Pull-Requests 0 Releases 0 Wiki Aktivität
Quellcode durchsuchen

Formalize some dependencies on PIDTEMPBED

Scott Lahteine vor 8 Jahren
Ursprung
5955a3063f
Commit
53cc6cca46
34 geänderte Dateien mit 116 neuen und 84 gelöschten Zeilen
Geteilte Ansicht Diff-Statistik anzeigen
  1. 2
    2
      Marlin/Configuration.h
  2. 5
    3
      Marlin/Configuration_adv.h
  3. 2
    2
      Marlin/example_configurations/Felix/Configuration.h
  4. 5
    3
      Marlin/example_configurations/Felix/Configuration_adv.h
  5. 2
    2
      Marlin/example_configurations/Hephestos/Configuration.h
  6. 5
    3
      Marlin/example_configurations/Hephestos/Configuration_adv.h
  7. 2
    2
      Marlin/example_configurations/Hephestos_2/Configuration.h
  8. 5
    3
      Marlin/example_configurations/Hephestos_2/Configuration_adv.h
  9. 2
    2
      Marlin/example_configurations/K8200/Configuration.h
  10. 5
    3
      Marlin/example_configurations/K8200/Configuration_adv.h
  11. 2
    2
      Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
  12. 2
    2
      Marlin/example_configurations/RigidBot/Configuration.h
  13. 5
    3
      Marlin/example_configurations/RigidBot/Configuration_adv.h
  14. 2
    2
      Marlin/example_configurations/SCARA/Configuration.h
  15. 5
    3
      Marlin/example_configurations/SCARA/Configuration_adv.h
  16. 2
    2
      Marlin/example_configurations/TAZ4/Configuration.h
  17. 5
    3
      Marlin/example_configurations/TAZ4/Configuration_adv.h
  18. 2
    2
      Marlin/example_configurations/WITBOX/Configuration.h
  19. 5
    3
      Marlin/example_configurations/WITBOX/Configuration_adv.h
  20. 2
    2
      Marlin/example_configurations/adafruit/ST7565/Configuration.h
  21. 2
    2
      Marlin/example_configurations/delta/biv2.5/Configuration.h
  22. 5
    3
      Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
  23. 2
    2
      Marlin/example_configurations/delta/generic/Configuration.h
  24. 5
    3
      Marlin/example_configurations/delta/generic/Configuration_adv.h
  25. 2
    2
      Marlin/example_configurations/delta/kossel_mini/Configuration.h
  26. 5
    3
      Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
  27. 2
    2
      Marlin/example_configurations/delta/kossel_pro/Configuration.h
  28. 5
    3
      Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
  29. 2
    2
      Marlin/example_configurations/delta/kossel_xl/Configuration.h
  30. 5
    3
      Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
  31. 2
    2
      Marlin/example_configurations/makibox/Configuration.h
  32. 5
    3
      Marlin/example_configurations/makibox/Configuration_adv.h
  33. 2
    2
      Marlin/example_configurations/tvrrug/Round2/Configuration.h
  34. 5
    3
      Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

+ 2
- 2
Marlin/Configuration.h Datei anzeigen 

@@ -280,10 +280,10 @@
280 280 
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
281 281 
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
282 282
283 
-//#define PID_BED_DEBUG // Sends debug data to the serial port.
284 
-
285 283 
 #if ENABLED(PIDTEMPBED)
286 284
285 
+  //#define PID_BED_DEBUG // Sends debug data to the serial port.
286 
+
287 287 
   #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
288 288
289 289 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)

+ 5
- 3
Marlin/Configuration_adv.h Datei anzeigen 

@@ -41,10 +41,12 @@
41 41 
 //=============================Thermal Settings  ============================
42 42 
 //===========================================================================
43 43
44 
-#if ENABLED(BED_LIMIT_SWITCHING)
45 
-  #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
44 
+#if DISABLED(PIDTEMPBED)
45 
+  #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
46 
+  #if ENABLED(BED_LIMIT_SWITCHING)
47 
+    #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
48 
+  #endif
46 49 
 #endif
47 
-#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
48 50
49 51 
 /**
50 52 
  * Thermal Protection protects your printer from damage and fire if a

+ 2
- 2
Marlin/example_configurations/Felix/Configuration.h Datei anzeigen 

@@ -269,10 +269,10 @@
269 269 
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
270 270 
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
271 271
272 
-//#define PID_BED_DEBUG // Sends debug data to the serial port.
273 
-
274 272 
 #if ENABLED(PIDTEMPBED)
275 273
274 
+  //#define PID_BED_DEBUG // Sends debug data to the serial port.
275 
+
276 276 
   #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
277 277
278 278 
   // Felix Foil Heater

+ 5
- 3
Marlin/example_configurations/Felix/Configuration_adv.h Datei anzeigen 

@@ -41,10 +41,12 @@
41 41 
 //=============================Thermal Settings  ============================
42 42 
 //===========================================================================
43 43
44 
-#if ENABLED(BED_LIMIT_SWITCHING)
45 
-  #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
44 
+#if DISABLED(PIDTEMPBED)
45 
+  #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
46 
+  #if ENABLED(BED_LIMIT_SWITCHING)
47 
+    #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
48 
+  #endif
46 49 
 #endif
47 
-#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
48 50
49 51 
 /**
50 52 
  * Thermal Protection protects your printer from damage and fire if a

+ 2
- 2
Marlin/example_configurations/Hephestos/Configuration.h Datei anzeigen 

@@ -272,10 +272,10 @@
272 272 
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
273 273 
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
274 274
275 
-//#define PID_BED_DEBUG // Sends debug data to the serial port.
276 
-
277 275 
 #if ENABLED(PIDTEMPBED)
278 276
277 
+  //#define PID_BED_DEBUG // Sends debug data to the serial port.
278 
+
279 279 
   #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
280 280
281 281 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)

+ 5
- 3
Marlin/example_configurations/Hephestos/Configuration_adv.h Datei anzeigen 

@@ -41,10 +41,12 @@
41 41 
 //=============================Thermal Settings  ============================
42 42 
 //===========================================================================
43 43
44 
-#if ENABLED(BED_LIMIT_SWITCHING)
45 
-  #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
44 
+#if DISABLED(PIDTEMPBED)
45 
+  #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
46 
+  #if ENABLED(BED_LIMIT_SWITCHING)
47 
+    #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
48 
+  #endif
46 49 
 #endif
47 
-#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
48 50
49 51 
 /**
50 52 
  * Thermal Protection protects your printer from damage and fire if a

+ 2
- 2
Marlin/example_configurations/Hephestos_2/Configuration.h Datei anzeigen 

@@ -274,10 +274,10 @@
274 274 
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
275 275 
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
276 276
277 
-//#define PID_BED_DEBUG // Sends debug data to the serial port.
278 
-
279 277 
 #if ENABLED(PIDTEMPBED)
280 278
279 
+  //#define PID_BED_DEBUG // Sends debug data to the serial port.
280 
+
281 281 
   #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
282 282
283 283 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)

+ 5
- 3
Marlin/example_configurations/Hephestos_2/Configuration_adv.h Datei anzeigen 

@@ -41,10 +41,12 @@
41 41 
 //=============================Thermal Settings  ============================
42 42 
 //===========================================================================
43 43
44 
-#if ENABLED(BED_LIMIT_SWITCHING)
45 
-  #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
44 
+#if DISABLED(PIDTEMPBED)
45 
+  #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
46 
+  #if ENABLED(BED_LIMIT_SWITCHING)
47 
+    #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
48 
+  #endif
46 49 
 #endif
47 
-#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
48 50
49 51 
 /**
50 52 
  * Thermal Protection protects your printer from damage and fire if a

+ 2
- 2
Marlin/example_configurations/K8200/Configuration.h Datei anzeigen 

@@ -291,10 +291,10 @@
291 291 
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
292 292 
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
293 293
294 
-//#define PID_BED_DEBUG // Sends debug data to the serial port.
295 
-
296 294 
 #if ENABLED(PIDTEMPBED)
297 295
296 
+  //#define PID_BED_DEBUG // Sends debug data to the serial port.
297 
+
298 298 
   #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
299 299
300 300 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)

+ 5
- 3
Marlin/example_configurations/K8200/Configuration_adv.h Datei anzeigen 

@@ -47,10 +47,12 @@
47 47 
 //=============================Thermal Settings  ============================
48 48 
 //===========================================================================
49 49
50 
-#if ENABLED(BED_LIMIT_SWITCHING)
51 
-  #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
50 
+#if DISABLED(PIDTEMPBED)
51 
+  #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
52 
+  #if ENABLED(BED_LIMIT_SWITCHING)
53 
+    #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
54 
+  #endif
52 55 
 #endif
53 
-#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
54 56
55 57 
 /**
56 58 
  * Thermal Protection protects your printer from damage and fire if a

+ 2
- 2
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h Datei anzeigen 

@@ -280,10 +280,10 @@
280 280 
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
281 281 
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
282 282
283 
-//#define PID_BED_DEBUG // Sends debug data to the serial port.
284 
-
285 283 
 #if ENABLED(PIDTEMPBED)
286 284
285 
+  //#define PID_BED_DEBUG // Sends debug data to the serial port.
286 
+
287 287 
   #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
288 288
289 289 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)

+ 2
- 2
Marlin/example_configurations/RigidBot/Configuration.h Datei anzeigen 

@@ -281,10 +281,10 @@
281 281 
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
282 282 
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
283 283
284 
-//#define PID_BED_DEBUG // Sends debug data to the serial port.
285 
-
286 284 
 #if ENABLED(PIDTEMPBED)
287 285
286 
+  //#define PID_BED_DEBUG // Sends debug data to the serial port.
287 
+
288 288 
   #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
289 289
290 290 
   //RigidBot, from pid autotune

+ 5
- 3
Marlin/example_configurations/RigidBot/Configuration_adv.h Datei anzeigen 

@@ -41,10 +41,12 @@
41 41 
 //=============================Thermal Settings  ============================
42 42 
 //===========================================================================
43 43
44 
-#if ENABLED(BED_LIMIT_SWITCHING)
45 
-  #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
44 
+#if DISABLED(PIDTEMPBED)
45 
+  #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
46 
+  #if ENABLED(BED_LIMIT_SWITCHING)
47 
+    #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
48 
+  #endif
46 49 
 #endif
47 
-#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
48 50
49 51 
 /**
50 52 
  * Thermal Protection protects your printer from damage and fire if a

+ 2
- 2
Marlin/example_configurations/SCARA/Configuration.h Datei anzeigen 

@@ -294,10 +294,10 @@
294 294 
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
295 295 
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
296 296
297 
-//#define PID_BED_DEBUG // Sends debug data to the serial port.
298 
-
299 297 
 #if ENABLED(PIDTEMPBED)
300 298
299 
+  //#define PID_BED_DEBUG // Sends debug data to the serial port.
300 
+
301 301 
   #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
302 302
303 303 
   //12v Heatbed Mk3 12V in parallel

+ 5
- 3
Marlin/example_configurations/SCARA/Configuration_adv.h Datei anzeigen 

@@ -41,10 +41,12 @@
41 41 
 //=============================Thermal Settings  ============================
42 42 
 //===========================================================================
43 43
44 
-#if ENABLED(BED_LIMIT_SWITCHING)
45 
-  #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
44 
+#if DISABLED(PIDTEMPBED)
45 
+  #define BED_CHECK_INTERVAL 3000 // ms between checks in bang-bang control
46 
+  #if ENABLED(BED_LIMIT_SWITCHING)
47 
+    #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
48 
+  #endif
46 49 
 #endif
47 
-#define BED_CHECK_INTERVAL 3000 //ms between checks in bang-bang control
48 50
49 51 
 /**
50 52 
  * Thermal Protection protects your printer from damage and fire if a

+ 2
- 2
Marlin/example_configurations/TAZ4/Configuration.h Datei anzeigen 

@@ -290,10 +290,10 @@
290 290 
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
291 291 
 #define MAX_BED_POWER 206 // limits duty cycle to bed; 255=full current
292 292
293 
-//#define PID_BED_DEBUG // Sends debug data to the serial port.
294 
-
295 293 
 #if ENABLED(PIDTEMPBED)
296 294
295 
+  //#define PID_BED_DEBUG // Sends debug data to the serial port.
296 
+
297 297 
   #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
298 298
299 299 
   //24V 360W silicone heater from NPH on 3mm borosilicate (TAZ 2.2+)

+ 5
- 3
Marlin/example_configurations/TAZ4/Configuration_adv.h Datei anzeigen 

@@ -41,10 +41,12 @@
41 41 
 //=============================Thermal Settings  ============================
42 42 
 //===========================================================================
43 43
44 
-#if ENABLED(BED_LIMIT_SWITCHING)
45 
-  #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
44 
+#if DISABLED(PIDTEMPBED)
45 
+  #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
46 
+  #if ENABLED(BED_LIMIT_SWITCHING)
47 
+    #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
48 
+  #endif
46 49 
 #endif
47 
-#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
48 50
49 51 
 /**
50 52 
  * Thermal Protection protects your printer from damage and fire if a

+ 2
- 2
Marlin/example_configurations/WITBOX/Configuration.h Datei anzeigen 

@@ -272,10 +272,10 @@
272 272 
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
273 273 
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
274 274
275 
-//#define PID_BED_DEBUG // Sends debug data to the serial port.
276 
-
277 275 
 #if ENABLED(PIDTEMPBED)
278 276
277 
+  //#define PID_BED_DEBUG // Sends debug data to the serial port.
278 
+
279 279 
   #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
280 280
281 281 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)

+ 5
- 3
Marlin/example_configurations/WITBOX/Configuration_adv.h Datei anzeigen 

@@ -41,10 +41,12 @@
41 41 
 //=============================Thermal Settings  ============================
42 42 
 //===========================================================================
43 43
44 
-#if ENABLED(BED_LIMIT_SWITCHING)
45 
-  #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
44 
+#if DISABLED(PIDTEMPBED)
45 
+  #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
46 
+  #if ENABLED(BED_LIMIT_SWITCHING)
47 
+    #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
48 
+  #endif
46 49 
 #endif
47 
-#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
48 50
49 51 
 /**
50 52 
  * Thermal Protection protects your printer from damage and fire if a

+ 2
- 2
Marlin/example_configurations/adafruit/ST7565/Configuration.h Datei anzeigen 

@@ -280,10 +280,10 @@
280 280 
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
281 281 
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
282 282
283 
-//#define PID_BED_DEBUG // Sends debug data to the serial port.
284 
-
285 283 
 #if ENABLED(PIDTEMPBED)
286 284
285 
+  //#define PID_BED_DEBUG // Sends debug data to the serial port.
286 
+
287 287 
   #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
288 288
289 289 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)

+ 2
- 2
Marlin/example_configurations/delta/biv2.5/Configuration.h Datei anzeigen 

@@ -280,10 +280,10 @@
280 280 
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
281 281 
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
282 282
283 
-//#define PID_BED_DEBUG // Sends debug data to the serial port.
284 
-
285 283 
 #if ENABLED(PIDTEMPBED)
286 284
285 
+  //#define PID_BED_DEBUG // Sends debug data to the serial port.
286 
+
287 287 
   #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
288 288
289 289 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)

+ 5
- 3
Marlin/example_configurations/delta/biv2.5/Configuration_adv.h Datei anzeigen 

@@ -41,10 +41,12 @@
41 41 
 //=============================Thermal Settings  ============================
42 42 
 //===========================================================================
43 43
44 
-#if ENABLED(BED_LIMIT_SWITCHING)
45 
-  #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
44 
+#if DISABLED(PIDTEMPBED)
45 
+  #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
46 
+  #if ENABLED(BED_LIMIT_SWITCHING)
47 
+    #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
48 
+  #endif
46 49 
 #endif
47 
-#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
48 50
49 51 
 /**
50 52 
  * Thermal Protection protects your printer from damage and fire if a

+ 2
- 2
Marlin/example_configurations/delta/generic/Configuration.h Datei anzeigen 

@@ -280,10 +280,10 @@
280 280 
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
281 281 
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
282 282
283 
-//#define PID_BED_DEBUG // Sends debug data to the serial port.
284 
-
285 283 
 #if ENABLED(PIDTEMPBED)
286 284
285 
+  //#define PID_BED_DEBUG // Sends debug data to the serial port.
286 
+
287 287 
   #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
288 288
289 289 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)

+ 5
- 3
Marlin/example_configurations/delta/generic/Configuration_adv.h Datei anzeigen 

@@ -41,10 +41,12 @@
41 41 
 //=============================Thermal Settings  ============================
42 42 
 //===========================================================================
43 43
44 
-#if ENABLED(BED_LIMIT_SWITCHING)
45 
-  #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
44 
+#if DISABLED(PIDTEMPBED)
45 
+  #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
46 
+  #if ENABLED(BED_LIMIT_SWITCHING)
47 
+    #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
48 
+  #endif
46 49 
 #endif
47 
-#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
48 50
49 51 
 /**
50 52 
  * Thermal Protection protects your printer from damage and fire if a

+ 2
- 2
Marlin/example_configurations/delta/kossel_mini/Configuration.h Datei anzeigen 

@@ -280,10 +280,10 @@
280 280 
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
281 281 
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
282 282
283 
-//#define PID_BED_DEBUG // Sends debug data to the serial port.
284 
-
285 283 
 #if ENABLED(PIDTEMPBED)
286 284
285 
+  //#define PID_BED_DEBUG // Sends debug data to the serial port.
286 
+
287 287 
   #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
288 288
289 289 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)

+ 5
- 3
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h Datei anzeigen 

@@ -41,10 +41,12 @@
41 41 
 //=============================Thermal Settings  ============================
42 42 
 //===========================================================================
43 43
44 
-#if ENABLED(BED_LIMIT_SWITCHING)
45 
-  #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
44 
+#if DISABLED(PIDTEMPBED)
45 
+  #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
46 
+  #if ENABLED(BED_LIMIT_SWITCHING)
47 
+    #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
48 
+  #endif
46 49 
 #endif
47 
-#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
48 50
49 51 
 /**
50 52 
  * Thermal Protection protects your printer from damage and fire if a

+ 2
- 2
Marlin/example_configurations/delta/kossel_pro/Configuration.h Datei anzeigen 

@@ -275,10 +275,10 @@
275 275 
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
276 276 
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
277 277
278 
-//#define PID_BED_DEBUG // Sends debug data to the serial port.
279 
-
280 278 
 #if ENABLED(PIDTEMPBED)
281 279
280 
+  //#define PID_BED_DEBUG // Sends debug data to the serial port.
281 
+
282 282 
   #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
283 283
284 284 
   //Kossel Pro heated bed plate with borosilicate glass

+ 5
- 3
Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h Datei anzeigen 

@@ -46,10 +46,12 @@
46 46 
 //=============================Thermal Settings  ============================
47 47 
 //===========================================================================
48 48
49 
-#if ENABLED(BED_LIMIT_SWITCHING)
50 
-  #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
49 
+#if DISABLED(PIDTEMPBED)
50 
+  #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
51 
+  #if ENABLED(BED_LIMIT_SWITCHING)
52 
+    #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
53 
+  #endif
51 54 
 #endif
52 
-#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
53 55
54 56 
 /**
55 57 
  * Thermal Protection protects your printer from damage and fire if a

+ 2
- 2
Marlin/example_configurations/delta/kossel_xl/Configuration.h Datei anzeigen 

@@ -308,10 +308,10 @@
308 308 
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
309 309 
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
310 310
311 
-//#define PID_BED_DEBUG // Sends debug data to the serial port.
312 
-
313 311 
 #if ENABLED(PIDTEMPBED)
314 312
313 
+  //#define PID_BED_DEBUG // Sends debug data to the serial port.
314 
+
315 315 
   #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
316 316
317 317 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)

+ 5
- 3
Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h Datei anzeigen 

@@ -41,10 +41,12 @@
41 41 
 //=============================Thermal Settings  ============================
42 42 
 //===========================================================================
43 43
44 
-#if ENABLED(BED_LIMIT_SWITCHING)
45 
-  #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
44 
+#if DISABLED(PIDTEMPBED)
45 
+  #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
46 
+  #if ENABLED(BED_LIMIT_SWITCHING)
47 
+    #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
48 
+  #endif
46 49 
 #endif
47 
-#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
48 50
49 51 
 /**
50 52 
  * Thermal Protection protects your printer from damage and fire if a

+ 2
- 2
Marlin/example_configurations/makibox/Configuration.h Datei anzeigen 

@@ -283,10 +283,10 @@
283 283 
 // to increase the heat up rate. However, if changed, user must be aware of the safety concerns
284 284 
 // of drawing too much current from the power supply.
285 285
286 
-//#define PID_BED_DEBUG // Sends debug data to the serial port.
287 
-
288 286 
 #if ENABLED(PIDTEMPBED)
289 287
288 
+  //#define PID_BED_DEBUG // Sends debug data to the serial port.
289 
+
290 290 
   #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
291 291
292 292 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)

+ 5
- 3
Marlin/example_configurations/makibox/Configuration_adv.h Datei anzeigen 

@@ -41,10 +41,12 @@
41 41 
 //=============================Thermal Settings  ============================
42 42 
 //===========================================================================
43 43
44 
-#if ENABLED(BED_LIMIT_SWITCHING)
45 
-  #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
44 
+#if DISABLED(PIDTEMPBED)
45 
+  #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
46 
+  #if ENABLED(BED_LIMIT_SWITCHING)
47 
+    #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
48 
+  #endif
46 49 
 #endif
47 
-#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
48 50
49 51 
 /**
50 52 
  * Thermal Protection protects your printer from damage and fire if a

+ 2
- 2
Marlin/example_configurations/tvrrug/Round2/Configuration.h Datei anzeigen 

@@ -270,10 +270,10 @@
270 270 
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
271 271 
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
272 272
273 
-//#define PID_BED_DEBUG // Sends debug data to the serial port.
274 
-
275 273 
 #if ENABLED(PIDTEMPBED)
276 274
275 
+  //#define PID_BED_DEBUG // Sends debug data to the serial port.
276 
+
277 277 
   #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
278 278
279 279 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)

+ 5
- 3
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h Datei anzeigen 

@@ -41,10 +41,12 @@
41 41 
 //=============================Thermal Settings  ============================
42 42 
 //===========================================================================
43 43
44 
-#if ENABLED(BED_LIMIT_SWITCHING)
45 
-  #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
44 
+#if DISABLED(PIDTEMPBED)
45 
+  #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
46 
+  #if ENABLED(BED_LIMIT_SWITCHING)
47 
+    #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
48 
+  #endif
46 49 
 #endif
47 
-#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
48 50
49 51 
 /**
50 52 
  * Thermal Protection protects your printer from damage and fire if a

Verfassen Vorschau
Laden…
Abbrechen
Speichern