Add menu item Tune > Advance K (#16488)

Marlin/src/lcd/menu/menu_advanced.cpp

       #if EXTRUDERS == 1
         EDIT_ITEM(float52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 999);
       #elif EXTRUDERS > 1
-        #define EDIT_ADVANCE_K(N) EDIT_ITEM_N(float52, N, MSG_ADVANCE_K_E, &planner.extruder_advance_K[N], 0, 999)
         for (uint8_t n = 0; n < EXTRUDERS; n++)
-          EDIT_ADVANCE_K(n);
+          EDIT_ITEM_N(float52, n, MSG_ADVANCE_K_E, &planner.extruder_advance_K[n], 0, 999);
       #endif
     #endif
 
       EDIT_ITEM(bool, MSG_VOLUMETRIC_ENABLED, &parser.volumetric_enabled, planner.calculate_volumetric_multipliers);
 
       if (parser.volumetric_enabled) {
-        #if EXTRUDERS == 1
-          EDIT_ITEM_FAST(float43, MSG_FILAMENT_DIAM, &planner.filament_size[0], 1.5f, 3.25f, planner.calculate_volumetric_multipliers);
-        #elif EXTRUDERS > 1
-          #define EDIT_FIL_DIAM(N) EDIT_ITEM_FAST_N(float43, N, MSG_FILAMENT_DIAM_E, &planner.filament_size[N], 1.5f, 3.25f, planner.calculate_volumetric_multipliers)
-          EDIT_ITEM_FAST(float43, MSG_FILAMENT_DIAM, &planner.filament_size[active_extruder], 1.5f, 3.25f, planner.calculate_volumetric_multipliers);
-          for (uint8_t n = 0; n < EXTRUDERS; n++) EDIT_FIL_DIAM(n);
+        EDIT_ITEM_FAST(float43, MSG_FILAMENT_DIAM, &planner.filament_size[active_extruder], 1.5f, 3.25f, planner.calculate_volumetric_multipliers);
+        #if EXTRUDERS > 1
+          for (uint8_t n = 0; n < EXTRUDERS; n++)
+            EDIT_ITEM_FAST_N(float43, n, MSG_FILAMENT_DIAM_E, &planner.filament_size[n], 1.5f, 3.25f, planner.calculate_volumetric_multipliers);
         #endif
       }
     #endif
         #endif
       ;
 
-      #if EXTRUDERS == 1
-        EDIT_ITEM_FAST(float3, MSG_FILAMENT_UNLOAD, &fc_settings[0].unload_length, 0, extrude_maxlength);
-      #elif EXTRUDERS > 1
-        #define EDIT_FIL_UNLOAD(N) EDIT_ITEM_FAST_N(float3, N, MSG_FILAMENTUNLOAD_E, &fc_settings[N].unload_length, 0, extrude_maxlength)
-        EDIT_ITEM_FAST(float3, MSG_FILAMENT_UNLOAD, &fc_settings[active_extruder].unload_length, 0, extrude_maxlength);
-        for (uint8_t n = 0; n < EXTRUDERS; n++) EDIT_FIL_UNLOAD(n);
+      EDIT_ITEM_FAST(float3, MSG_FILAMENT_UNLOAD, &fc_settings[active_extruder].unload_length, 0, extrude_maxlength);
+      #if EXTRUDERS > 1
+        for (uint8_t n = 0; n < EXTRUDERS; n++)
+          EDIT_ITEM_FAST_N(float3, n, MSG_FILAMENTUNLOAD_E, &fc_settings[n].unload_length, 0, extrude_maxlength);
       #endif
 
-      #if EXTRUDERS == 1
-        EDIT_ITEM_FAST(float3, MSG_FILAMENT_LOAD, &fc_settings[0].load_length, 0, extrude_maxlength);
-      #elif EXTRUDERS > 1
-        #define EDIT_FIL_LOAD(N) EDIT_ITEM_FAST_N(float3, N, MSG_FILAMENTLOAD_E, &fc_settings[N].load_length, 0, extrude_maxlength)
-        EDIT_ITEM_FAST(float3, MSG_FILAMENT_LOAD, &fc_settings[active_extruder].load_length, 0, extrude_maxlength);
-        for (uint8_t n = 0; n < EXTRUDERS; n++) EDIT_FIL_LOAD(n);
+      EDIT_ITEM_FAST(float3, MSG_FILAMENT_LOAD, &fc_settings[active_extruder].load_length, 0, extrude_maxlength);
+      #if EXTRUDERS > 1
+        for (uint8_t n = 0; n < EXTRUDERS; n++)
+          EDIT_ITEM_FAST_N(float3, n, MSG_FILAMENTLOAD_E, &fc_settings[n].load_length, 0, extrude_maxlength);
       #endif
     #endif
 
     EDIT_VMAX(B);
     EDIT_VMAX(C);
 
-    #if ENABLED(DISTINCT_E_FACTORS)
-      #define EDIT_VMAX_E(N) EDIT_ITEM_FAST_N(float3, N, MSG_VMAX_EN, &planner.settings.max_feedrate_mm_s[E_AXIS_N(N)], 1, max_fr_edit_scaled.e)
+    #if E_STEPPERS
       EDIT_ITEM_FAST(float3, MSG_VMAX_E, &planner.settings.max_feedrate_mm_s[E_AXIS_N(active_extruder)], 1, max_fr_edit_scaled.e);
-      for (uint8_t n = 0; n < E_STEPPERS; n++) EDIT_VMAX_E(n);
-    #elif E_STEPPERS
-      EDIT_ITEM_FAST(float3, MSG_VMAX_E, &planner.settings.max_feedrate_mm_s[E_AXIS], 1, max_fr_edit_scaled.e);
+    #endif
+    #if ENABLED(DISTINCT_E_FACTORS)
+      for (uint8_t n = 0; n < E_STEPPERS; n++)
+        EDIT_ITEM_FAST_N(float3, n, MSG_VMAX_EN, &planner.settings.max_feedrate_mm_s[E_AXIS_N(n)], 1, max_fr_edit_scaled.e);
     #endif
 
     // M205 S Min Feedrate
     #endif
 
     #define EDIT_AMAX(Q,L) EDIT_ITEM_FAST(long5_25, MSG_AMAX_##Q, &planner.settings.max_acceleration_mm_per_s2[_AXIS(Q)], L, max_accel_edit_scaled[_AXIS(Q)], []{ planner.reset_acceleration_rates(); })
-
     EDIT_AMAX(A,100);
     EDIT_AMAX(B,100);
     EDIT_AMAX(C, 10);
 
     #if ENABLED(DISTINCT_E_FACTORS)
-      #define EDIT_AMAX_E(N) EDIT_ITEM_FAST_N(long5_25, N, MSG_AMAX_EN, &planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(N)], 100, max_accel_edit_scaled.e, []{ _reset_e_acceleration_rate(MenuItemBase::itemIndex); })
       EDIT_ITEM_FAST(long5_25, MSG_AMAX_E, &planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(active_extruder)], 100, max_accel_edit_scaled.e, []{ planner.reset_acceleration_rates(); });
-      for (uint8_t n = 0; n < E_STEPPERS; n++) EDIT_AMAX_E(n);
+      for (uint8_t n = 0; n < E_STEPPERS; n++)
+        EDIT_ITEM_FAST_N(long5_25, n, MSG_AMAX_EN, &planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(n)], 100, max_accel_edit_scaled.e, []{ _reset_e_acceleration_rate(MenuItemBase::itemIndex); });
     #elif E_STEPPERS
       EDIT_ITEM_FAST(long5_25, MSG_AMAX_E, &planner.settings.max_acceleration_mm_per_s2[E_AXIS], 100, max_accel_edit_scaled.e, []{ planner.reset_acceleration_rates(); });
     #endif
     EDIT_QSTEPS(C);
 
     #if ENABLED(DISTINCT_E_FACTORS)
-      #define EDIT_ESTEPS(N) EDIT_ITEM_FAST_N(float51, N, MSG_EN_STEPS, &planner.settings.axis_steps_per_mm[E_AXIS_N(N)], 5, 9999, []{ _planner_refresh_e_positioning(MenuItemBase::itemIndex); })
       EDIT_ITEM_FAST(float51, MSG_E_STEPS, &planner.settings.axis_steps_per_mm[E_AXIS_N(active_extruder)], 5, 9999, []{ planner.refresh_positioning(); });
-      for (uint8_t n = 0; n < E_STEPPERS; n++) EDIT_ESTEPS(n);
+      for (uint8_t n = 0; n < E_STEPPERS; n++)
+        EDIT_ITEM_FAST_N(float51, n, MSG_EN_STEPS, &planner.settings.axis_steps_per_mm[E_AXIS_N(n)], 5, 9999, []{ _planner_refresh_e_positioning(MenuItemBase::itemIndex); });
     #elif E_STEPPERS
       EDIT_ITEM_FAST(float51, MSG_E_STEPS, &planner.settings.axis_steps_per_mm[E_AXIS], 5, 9999, []{ planner.refresh_positioning(); });
     #endif
     #if EXTRUDERS == 1
       EDIT_ITEM(float52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 999);
     #elif EXTRUDERS > 1
-      #define EDIT_ADVANCE_K(N) EDIT_ITEM_N(float52, N, MSG_ADVANCE_K_E, &planner.extruder_advance_K[N], 0, 999)
-      for (uint8_t n = 0; n < E_STEPPERS; n++) EDIT_ADVANCE_K(n);
+      for (uint8_t n = 0; n < E_STEPPERS; n++)
+        EDIT_ITEM_N(float52, n, MSG_ADVANCE_K_E, &planner.extruder_advance_K[n], 0, 999);
     #endif
   #endif
 

Marlin/src/lcd/menu/menu_temperature.cpp

   #if HOTENDS == 1
     EDIT_ITEM_FAST(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, HEATER_0_MAXTEMP - 15, []{ thermalManager.start_watching_hotend(0); });
   #elif HOTENDS > 1
-    #define EDIT_TARGET(N) EDIT_ITEM_FAST_N(int3, N, MSG_NOZZLE_N, &thermalManager.temp_hotend[N].target, 0, heater_maxtemp[N] - 15, []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); })
-    HOTEND_LOOP() EDIT_TARGET(e);
+    HOTEND_LOOP()
+      EDIT_ITEM_FAST_N(int3, e, MSG_NOZZLE_N, &thermalManager.temp_hotend[e].target, 0, heater_maxtemp[e] - 15, []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); });
   #endif
 
   #if ENABLED(SINGLENOZZLE)

Marlin/src/lcd/menu/menu_tune.cpp

   #if HOTENDS == 1
     EDIT_ITEM_FAST(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, HEATER_0_MAXTEMP - 15, []{ thermalManager.start_watching_hotend(0); });
   #elif HOTENDS > 1
-    #define EDIT_NOZZLE(N) EDIT_ITEM_FAST_N(int3, N, MSG_NOZZLE_N, &thermalManager.temp_hotend[N].target, 0, heater_maxtemp[N] - 15, []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); })
-    HOTEND_LOOP() EDIT_NOZZLE(e);
+    HOTEND_LOOP()
+      EDIT_ITEM_FAST_N(int3, e, MSG_NOZZLE_N, &thermalManager.temp_hotend[e].target, 0, heater_maxtemp[e] - 15, []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); });
   #endif
 
   #if ENABLED(SINGLENOZZLE)
 
   //
   // Flow:
-  // Flow [1-5]:
   //
-  #if EXTRUDERS == 1
-    EDIT_ITEM(int3, MSG_FLOW, &planner.flow_percentage[0], 10, 999, []{ planner.refresh_e_factor(0); });
-  #elif EXTRUDERS
+  #if EXTRUDERS
     EDIT_ITEM(int3, MSG_FLOW, &planner.flow_percentage[active_extruder], 10, 999, []{ planner.refresh_e_factor(active_extruder); });
-    #define EDIT_FLOW(N) EDIT_ITEM_N(int3, N, MSG_FLOW_N, &planner.flow_percentage[N], 10, 999, []{ planner.refresh_e_factor(MenuItemBase::itemIndex); })
-    for (uint8_t n = 0; n < EXTRUDERS; n++) EDIT_FLOW(n);
+    // Flow En:
+    #if EXTRUDERS > 1
+      for (uint8_t n = 0; n < EXTRUDERS; n++)
+        EDIT_ITEM_N(int3, n, MSG_FLOW_N, &planner.flow_percentage[n], 10, 999, []{ planner.refresh_e_factor(MenuItemBase::itemIndex); });
+    #endif
+  #endif
+
+  //
+  // Advance K:
+  //
+  #if ENABLED(LIN_ADVANCE) && DISABLED(SLIM_LCD_MENUS)
+    #if EXTRUDERS == 1
+      EDIT_ITEM(float52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 999);
+    #elif EXTRUDERS > 1
+      for (uint8_t n = 0; n < EXTRUDERS; n++)
+        EDIT_ITEM_N(float52, n, MSG_ADVANCE_K_E, &planner.extruder_advance_K[n], 0, 999);
+    #endif
   #endif
 
   //