Clean up pins files

Marlin/src/pins/pins_ANET_10.h

   #error "Oops! Select 'Anet V1.0', 'Anet V1.0 (Optiboot)' or 'Sanguino' in 'Tools > Board' and 'ATmega1284P' in 'Tools > Processor.'"
 #endif
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME "Anet"
-#endif
+#define BOARD_NAME "Anet 1.0"
 
 //
 // Limit Switches

Marlin/src/pins/pins_AZSMZ_MINI.h

   #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME "AZSMZ MINI"
-#endif
+#define BOARD_NAME "AZSMZ MINI"
 
 //
 // Servos

Marlin/src/pins/pins_AZTEEG_X5_GT.h

   #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME "Azteeg X5 GT"
-  #define DEFAULT_WEBSITE_URL "https://www.panucatt.com/azteeg_X5_GT_reprap_3d_printer_controller_p/ax5gt.htm"
-#endif
+#define BOARD_NAME          "Azteeg X5 GT"
+#define DEFAULT_WEBSITE_URL "https://www.panucatt.com/azteeg_X5_GT_reprap_3d_printer_controller_p/ax5gt.htm"
 
 //
 //  Set CPU

Marlin/src/pins/pins_AZTEEG_X5_MINI_WIFI.h

   #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME "Azteeg X5 MINI WIFI"
-  #define DEFAULT_WEBSITE_URL "http://www.panucatt.com/azteeg_X5_mini_reprap_3d_printer_controller_p/ax5mini.htm"
-#endif
+#define BOARD_NAME          "Azteeg X5 MINI WIFI"
+#define DEFAULT_WEBSITE_URL "http://www.panucatt.com/azteeg_X5_mini_reprap_3d_printer_controller_p/ax5mini.htm"
 
 //
 // LED

Marlin/src/pins/pins_BIQU_BQ111_A4.h

   #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME "BIQU BQ111-A4"
-#endif
+#define BOARD_NAME "BIQU BQ111-A4"
 
 //
 // Limit Switches

Marlin/src/pins/pins_BRAINWAVE.h

   #error "Oops! Select 'AT90USB646_TEENSYPP' in 'Tools > Board.'"
 #endif
 
-#define BOARD_NAME         "Brainwave"
+#define BOARD_NAME "Brainwave"
 
 //
 // Limit Switches

Marlin/src/pins/pins_BRAINWAVE_PRO.h

   #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'"
 #endif
 
-#define BOARD_NAME         "Brainwave Pro"
+#define BOARD_NAME "Brainwave Pro"
 
 //
 // Limit Switches

Marlin/src/pins/pins_CHEAPTRONIC.h

   #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif
 
-#define BOARD_NAME         "Cheaptronic v1.0"
+#define BOARD_NAME "Cheaptronic v1.0"
 //
 // Limit Switches
 //

Marlin/src/pins/pins_CHEAPTRONICv2.h

   #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif
 
-#define BOARD_NAME         "Cheaptronic v2.0"
+#define BOARD_NAME "Cheaptronic v2.0"
 
 //
 // Limit Switches

Marlin/src/pins/pins_CNCONTROLS_12.h

   #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif
 
-#define BOARD_NAME            "CN Controls V12"
+#define BOARD_NAME "CN Controls V12"
 
 //
 // Limit Switches

Marlin/src/pins/pins_COHESION3D_MINI.h

   #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME "Cohesion3D Mini"
-#endif
+#define BOARD_NAME "Cohesion3D Mini"
 
 //
 // Servos

Marlin/src/pins/pins_COHESION3D_REMIX.h

   #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME "Cohesion3D ReMix"
-#endif
+#define BOARD_NAME "Cohesion3D ReMix"
 
 //
 // Servos

Marlin/src/pins/pins_EINSTART-S.h

  */
 
 /**
- * Einstart S pin assignments
+ * Einstart-S pin assignments
  * PCB Silkscreen: 3DPrinterCon_v3.5
  */
 
   #endif
 #endif
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME "EINSTART_S"
-#endif
+#define BOARD_NAME "Einstart-S"
 
 //
 // Limit Switches

Marlin/src/pins/pins_EINSY_RAMBO.h

   #error "Oops! Select 'Arduino Mega 2560 or Rambo' in 'Tools > Board.'"
 #endif
 
-#define BOARD_NAME         "Einsy Rambo"
+#define BOARD_NAME "Einsy Rambo"
 
 //
 // TMC2130 Configuration_adv defaults for EinsyRambo

Marlin/src/pins/pins_EINSY_RETRO.h

   #error "Oops! Select 'Arduino Mega 2560 or Rambo' in 'Tools > Board.'"
 #endif
 
-#define BOARD_NAME         "Einsy Retro"
+#define BOARD_NAME "Einsy Retro"
 
 //
 // TMC2130 Configuration_adv defaults for EinsyRetro

Marlin/src/pins/pins_ESP32.h

  * Espressif ESP32 (Tensilica Xtensa LX6) pin assignments
  */
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME "Espressif ESP32"
-#endif
+#define BOARD_NAME "Espressif ESP32"
 
 //
 // Limit Switches

Marlin/src/pins/pins_FYSETC_F6_13.h

 //
 
 #ifndef __AVR_ATmega2560__
-  #error "Oops! Select 'FYSETC_F6' in 'Tools > Board.'"
+  #error "Oops! Select 'FYSETC F6' in 'Tools > Board.'"
 #endif
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME "FYSETC_F6_13"
-#endif
+#define BOARD_NAME "FYSETC F6 1.3"
 
 //
 // Servos

Marlin/src/pins/pins_GEN3_PLUS.h

   #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644P' or 'ATmega1284P' in 'Tools > Processor.'"
 #endif
 
-#define BOARD_NAME         "Gen3+"
+#define BOARD_NAME "Gen3+"
 
 //
 // Limit Switches

Marlin/src/pins/pins_GEN7_CUSTOM.h

   #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644', 'ATmega644P', or 'ATmega1284P' in 'Tools > Processor.'"
 #endif
 
-#define BOARD_NAME      "Gen7 Custom"
+#define BOARD_NAME "Gen7 Custom"
 
 //
 // Limit Switches

Marlin/src/pins/pins_LEAPFROG.h

   #error "Oops! Select 'Mega 1280' or 'Mega 2560' in 'Tools > Board.'"
 #endif
 
-#define BOARD_NAME         "Leapfrog"
+#define BOARD_NAME "Leapfrog"
 
 //
 // Limit Switches

Marlin/src/pins/pins_MEGATRONICS.h

   #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif
 
-#define BOARD_NAME         "Megatronics"
+#define BOARD_NAME "Megatronics"
 //
 // Limit Switches
 //

Marlin/src/pins/pins_MINITRONICS.h

   #error "Minitronics supports up to 2 hotends / E-steppers. Comment out this line to continue."
 #endif
 
-#define BOARD_NAME         "Minitronics v1.0 / v1.1"
+#define BOARD_NAME "Minitronics v1.0/1.1"
 //
 // Limit Switches
 //

Marlin/src/pins/pins_MKS_SBASE.h

   #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME "MKS SBASE"
-  #define DEFAULT_WEBSITE_URL "https://github.com/makerbase-mks/MKS-SBASE"
-#endif
-
-// unused
-/*
-#define PIN_P0_27          P0_27   // EXP2/Onboard SD
-#define PIN_P0_28          P0_28   // EXP2
-#define PIN_P0_02          P0_02   // AUX1 (Interrupt Capable/ADC/Serial Port 0)
-#define PIN_P0_03          P0_03   // AUX1 (Interrupt Capable/ADC/Serial Port 0)
-*/
+#define BOARD_NAME          "MKS SBASE"
+#define DEFAULT_WEBSITE_URL "https://github.com/makerbase-mks/MKS-SBASE"
 
 #define LED_PIN            P1_18   // Used as a status indicator
 #define LED2_PIN           P1_19
   #define E0_SERIAL_RX_PIN P0_26   // TH4
 #endif
 
+// UNUSED
+#define PIN_P0_27          P0_27   // EXP2/Onboard SD
+#define PIN_P0_28          P0_28   // EXP2
+#define PIN_P0_02          P0_02   // AUX1 (Interrupt Capable/ADC/Serial Port 0)
+#define PIN_P0_03          P0_03   // AUX1 (Interrupt Capable/ADC/Serial Port 0)
+
 /**
  *  PWMs
  *

Marlin/src/pins/pins_OMCA.h

   #error "Oops! Select 'Sanguino' in 'Tools > Board' and 'ATmega644' or 'ATmega644P' in 'Tools > Processor.'"
 #endif
 
-#define BOARD_NAME         "Final OMCA"
+#define BOARD_NAME "Final OMCA"
 
 //
 // Limit Switches

Marlin/src/pins/pins_OMCA_A.h

   #error "Oops! Select 'Sanguino' in 'Tools > Board' and ATmega644 in 'Tools > Processor.'"
 #endif
 
-#define BOARD_NAME         "Alpha OMCA"
+#define BOARD_NAME "Alpha OMCA"
 
 //
 // Limit Switches

Marlin/src/pins/pins_PRINTRBOARD.h

   #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'"
 #endif
 
-#define BOARD_NAME         "Printrboard"
+#define BOARD_NAME "Printrboard"
 
 // Disable JTAG pins so they can be used for the Extrudrboard
 #define DISABLE_JTAG

Marlin/src/pins/pins_PRINTRBOARD_REVF.h

   #error "USBCON should be defined by the platform for this board."
 #endif
 
-#define BOARD_NAME         "Printrboard Rev.F"
+#define BOARD_NAME "Printrboard Rev.F"
+
 // Disable JTAG pins so EXP1 pins work correctly
 // (Its pins are used for the Extrudrboard and filament sensor, for example).
 #define DISABLE_JTAG

Marlin/src/pins/pins_RADDS.h

   #error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
 #endif
 
-#define BOARD_NAME         "RADDS"
+#define BOARD_NAME "RADDS"
 
 //
 // Servos

Marlin/src/pins/pins_RAMPS4DUE.h

   #error "Oops! Select 'Arduino Due' or 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME       "RAMPS4DUE"
-#endif
+#define BOARD_NAME "RAMPS4DUE"
 
 #define IS_RAMPS4DUE
 #include "pins_RAMPS.h"

Marlin/src/pins/pins_RAMPS_DUO.h

   #error "Oops! Select 'Arduino Due' or 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME       "RAMPS Duo"
-#endif
+#define BOARD_NAME "RAMPS Duo"
 
 #define IS_RAMPS_DUO
 #include "pins_RAMPS.h"

Marlin/src/pins/pins_RAMPS_FD_V1.h

 #endif
 
 #ifndef BOARD_NAME
-  #define BOARD_NAME       "RAMPS-FD"
+  #define BOARD_NAME "RAMPS-FD v1"
 #endif
 
 #define INVERTED_HEATER_PINS

Marlin/src/pins/pins_RAMPS_FD_V2.h

  * Use 1k thermistor tables
  */
 
-#define BOARD_NAME         "RAMPS-FD v2"
+#define BOARD_NAME "RAMPS-FD v2"
 
 #ifndef E0_CS_PIN
   #define E0_CS_PIN        69 // moved from A13 to A15 on v2.2, if not earlier

Marlin/src/pins/pins_RAMPS_OLD.h

   #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif
 
-#define BOARD_NAME         "MEGA/RAMPS <1.2"
+#define BOARD_NAME "RAMPS <1.2"
 
 // Uncomment the following line for RAMPS v1.0
 //#define RAMPS_V_1_0

Marlin/src/pins/pins_RAMPS_PLUS.h

  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif
 
-#ifndef BOARD_NAME
- #define BOARD_NAME "RAMPS 1.4 Plus"
-#endif
+#define BOARD_NAME "RAMPS 1.4 Plus"
 
 #define RAMPS_D8_PIN  10
 #define RAMPS_D10_PIN  8

Marlin/src/pins/pins_RAMPS_RE_ARM.h

  *
  */
 
-// numbers in parenthesis () are the mega2560 equivalent pin numbers
+// Numbers in parentheses () are the corresponding mega2560 pin numbers
 
 #ifndef TARGET_LPC1768
   #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME "Re-ARM RAMPS 1.4"
-#endif
+#define BOARD_NAME "Re-ARM RAMPS 1.4"
 
 //
 // Servos

Marlin/src/pins/pins_RAMPS_SMART.h

   #error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
 #endif
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME       "RAMPS-SMART"
-#endif
+#define BOARD_NAME "RAMPS-SMART"
 
 #define IS_RAMPS_SMART
 #include "pins_RAMPS.h"

Marlin/src/pins/pins_RURAMPS4D_11.h

   #error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
 #endif
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME       "RuRAMPS4Due v1.1"
-#endif
+#define BOARD_NAME "RuRAMPS4Due v1.1"
 
 //
 // Servos

Marlin/src/pins/pins_RURAMPS4D_13.h

   #error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
 #endif
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME       "RuRAMPS4Due v1.3"
-#endif
+#define BOARD_NAME "RuRAMPS4Due v1.3"
 
 //
 // Servos

Marlin/src/pins/pins_SELENA_COMPACT.h

   #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME "Selena Compact"
-  #define DEFAULT_WEBSITE_URL "https://github.com/Ales2-k/Selena"
-#endif
+#define BOARD_NAME          "Selena Compact"
+#define DEFAULT_WEBSITE_URL "https://github.com/Ales2-k/Selena"
 
 //
 // Limit Switches

Marlin/src/pins/pins_SILVER_GATE.h

   #error "Oops! Select 'Silvergate' in 'Tools > Board.'"
 #endif
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME "Silver Gate"
-#endif
+#define BOARD_NAME "Silver Gate"
 
 #define X_STEP_PIN         43
 #define X_DIR_PIN          44

Marlin/src/pins/pins_SMOOTHIEBOARD.h

   #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME "Smoothieboard"
-  #define DEFAULT_WEBSITE_URL "http://smoothieware.org/smoothieboard"
-#endif
+#define BOARD_NAME          "Smoothieboard"
+#define DEFAULT_WEBSITE_URL "http://smoothieware.org/smoothieboard"
 
 #undef F_CPU
 #define F_CPU 120000000

Marlin/src/pins/pins_TEENSY2.h

   #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'"
 #endif
 
-#define BOARD_NAME         "Teensy++2.0"
+#define BOARD_NAME "Teensy++2.0"
 
 //
 // Limit Switches

Marlin/src/pins/pins_TEENSYLU.h

   #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'"
 #endif
 
-#define BOARD_NAME         "Teensylu"
+#define BOARD_NAME "Teensylu"
 
 //
 // Limit Switch definitions that match the SCHEMATIC

Marlin/src/pins/pins_TRIGORILLA_13.h

  * Arduino Mega with RAMPS v1.3 for Anycubic
  */
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME "Anycubic RAMPS 1.3"
-#endif
+#define BOARD_NAME "Anycubic RAMPS 1.3"
 
 #define IS_RAMPS_EFB
 #define RAMPS_D9_PIN         44

Marlin/src/pins/pins_TRIGORILLA_14.h

  * Arduino Mega with RAMPS v1.4 for Anycubic
  */
 
-#ifndef BOARD_NAME
-  #define BOARD_NAME "Anycubic RAMPS 1.4"
-#endif
+#define BOARD_NAME "Anycubic RAMPS 1.4"
 
 // Labeled pins
 #define TRIGORILLA_HEATER_BED_PIN  8

Marlin/src/pins/pins_ULTRATRONICS_PRO.h

  * ReprapWorld ULTRATRONICS v1.0
  */
 
-#define KNOWN_BOARD
-#define BOARD_NAME "Ultratronics v1.0"
-
 #ifndef ARDUINO_ARCH_SAM
   #error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
 #endif
 
+#define BOARD_NAME "Ultratronics v1.0"
+
 //
 // Servos
 //