Bläddra i källkod

Tweak comments for newer multiplexer

Scott Lahteine 6 år sedan
förälder
incheckning
66966dbd69
70 ändrade filer med 140 tillägg och 140 borttagningar
  1. 2
    2
      Marlin/Configuration.h
  2. 2
    2
      Marlin/src/config/default/Configuration.h
  3. 2
    2
      Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
  4. 2
    2
      Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
  5. 2
    2
      Marlin/src/config/examples/Anet/A6/Configuration.h
  6. 2
    2
      Marlin/src/config/examples/Anet/A8/Configuration.h
  7. 2
    2
      Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
  8. 2
    2
      Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
  9. 2
    2
      Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
  10. 2
    2
      Marlin/src/config/examples/BQ/Hephestos/Configuration.h
  11. 2
    2
      Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
  12. 2
    2
      Marlin/src/config/examples/BQ/WITBOX/Configuration.h
  13. 2
    2
      Marlin/src/config/examples/Cartesio/Configuration.h
  14. 2
    2
      Marlin/src/config/examples/Creality/CR-10/Configuration.h
  15. 2
    2
      Marlin/src/config/examples/Creality/CR-10S/Configuration.h
  16. 2
    2
      Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
  17. 2
    2
      Marlin/src/config/examples/Creality/CR-8/Configuration.h
  18. 2
    2
      Marlin/src/config/examples/Creality/Ender-2/Configuration.h
  19. 2
    2
      Marlin/src/config/examples/Creality/Ender-3/Configuration.h
  20. 2
    2
      Marlin/src/config/examples/Creality/Ender-4/Configuration.h
  21. 2
    2
      Marlin/src/config/examples/Einstart-S/Configuration.h
  22. 2
    2
      Marlin/src/config/examples/Felix/Configuration.h
  23. 2
    2
      Marlin/src/config/examples/Felix/DUAL/Configuration.h
  24. 2
    2
      Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
  25. 2
    2
      Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
  26. 2
    2
      Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
  27. 2
    2
      Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
  28. 2
    2
      Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
  29. 2
    2
      Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
  30. 2
    2
      Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
  31. 2
    2
      Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
  32. 2
    2
      Marlin/src/config/examples/JGAurora/A5/Configuration.h
  33. 2
    2
      Marlin/src/config/examples/MakerParts/Configuration.h
  34. 2
    2
      Marlin/src/config/examples/Malyan/M150/Configuration.h
  35. 2
    2
      Marlin/src/config/examples/Malyan/M200/Configuration.h
  36. 2
    2
      Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
  37. 2
    2
      Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
  38. 2
    2
      Marlin/src/config/examples/Mks/Sbase/Configuration.h
  39. 2
    2
      Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
  40. 2
    2
      Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
  41. 2
    2
      Marlin/src/config/examples/RigidBot/Configuration.h
  42. 2
    2
      Marlin/src/config/examples/SCARA/Configuration.h
  43. 2
    2
      Marlin/src/config/examples/STM32F10/Configuration.h
  44. 2
    2
      Marlin/src/config/examples/STM32F4/Configuration.h
  45. 2
    2
      Marlin/src/config/examples/Sanguinololu/Configuration.h
  46. 2
    2
      Marlin/src/config/examples/TheBorg/Configuration.h
  47. 2
    2
      Marlin/src/config/examples/TinyBoy2/Configuration.h
  48. 2
    2
      Marlin/src/config/examples/Tronxy/X1/Configuration.h
  49. 2
    2
      Marlin/src/config/examples/Tronxy/X3A/Configuration.h
  50. 2
    2
      Marlin/src/config/examples/Tronxy/X5S/Configuration.h
  51. 2
    2
      Marlin/src/config/examples/Tronxy/XY100/Configuration.h
  52. 2
    2
      Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
  53. 2
    2
      Marlin/src/config/examples/Velleman/K8200/Configuration.h
  54. 2
    2
      Marlin/src/config/examples/Velleman/K8400/Configuration.h
  55. 2
    2
      Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
  56. 2
    2
      Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
  57. 2
    2
      Marlin/src/config/examples/adafruit/ST7565/Configuration.h
  58. 2
    2
      Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
  59. 2
    2
      Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
  60. 2
    2
      Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
  61. 2
    2
      Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
  62. 2
    2
      Marlin/src/config/examples/delta/generic/Configuration.h
  63. 2
    2
      Marlin/src/config/examples/delta/kossel_mini/Configuration.h
  64. 2
    2
      Marlin/src/config/examples/delta/kossel_pro/Configuration.h
  65. 2
    2
      Marlin/src/config/examples/delta/kossel_xl/Configuration.h
  66. 2
    2
      Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
  67. 2
    2
      Marlin/src/config/examples/makibox/Configuration.h
  68. 2
    2
      Marlin/src/config/examples/stm32f103ret6/Configuration.h
  69. 2
    2
      Marlin/src/config/examples/tvrrug/Round2/Configuration.h
  70. 2
    2
      Marlin/src/config/examples/wt150/Configuration.h

+ 2
- 2
Marlin/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/default/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/AliExpress/CL-260/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Anet/A6/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Anet/A8/Configuration.h Visa fil

@@ -172,8 +172,8 @@
172 172
   // Override the default DIO selector pins here, if needed.
173 173
   // Some pins files may provide defaults for these pins.
174 174
   //#define E_MUX0_PIN 40  // Always Required
175
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
176
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
175
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
176
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
177 177
 #endif
178 178
 
179 179
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Azteeg/X5GT/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/BQ/Hephestos/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h Visa fil

@@ -179,8 +179,8 @@
179 179
   // Override the default DIO selector pins here, if needed.
180 180
   // Some pins files may provide defaults for these pins.
181 181
   //#define E_MUX0_PIN 40  // Always Required
182
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
183
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
182
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
183
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
184 184
 #endif
185 185
 
186 186
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/BQ/WITBOX/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Cartesio/Configuration.h Visa fil

@@ -172,8 +172,8 @@
172 172
   // Override the default DIO selector pins here, if needed.
173 173
   // Some pins files may provide defaults for these pins.
174 174
   //#define E_MUX0_PIN 40  // Always Required
175
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
176
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
175
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
176
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
177 177
 #endif
178 178
 
179 179
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Creality/CR-10/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Creality/CR-10S/Configuration.h Visa fil

@@ -175,8 +175,8 @@
175 175
   // Override the default DIO selector pins here, if needed.
176 176
   // Some pins files may provide defaults for these pins.
177 177
   //#define E_MUX0_PIN 40  // Always Required
178
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
179
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
178
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
179
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
180 180
 #endif
181 181
 
182 182
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Creality/CR-10mini/Configuration.h Visa fil

@@ -180,8 +180,8 @@
180 180
   // Override the default DIO selector pins here, if needed.
181 181
   // Some pins files may provide defaults for these pins.
182 182
   //#define E_MUX0_PIN 40  // Always Required
183
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
184
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
183
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
184
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
185 185
 #endif
186 186
 
187 187
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Creality/CR-8/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Creality/Ender-2/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Creality/Ender-3/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Creality/Ender-4/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Einstart-S/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Felix/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Felix/DUAL/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Geeetech/GT2560/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Infitary/i3-M508/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/JGAurora/A5/Configuration.h Visa fil

@@ -176,8 +176,8 @@
176 176
   // Override the default DIO selector pins here, if needed.
177 177
   // Some pins files may provide defaults for these pins.
178 178
   //#define E_MUX0_PIN 40  // Always Required
179
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
180
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
179
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
180
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
181 181
 #endif
182 182
 
183 183
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/MakerParts/Configuration.h Visa fil

@@ -191,8 +191,8 @@
191 191
   // Override the default DIO selector pins here, if needed.
192 192
   // Some pins files may provide defaults for these pins.
193 193
   //#define E_MUX0_PIN 40  // Always Required
194
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
195
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
194
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
195
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
196 196
 #endif
197 197
 
198 198
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Malyan/M150/Configuration.h Visa fil

@@ -176,8 +176,8 @@
176 176
   // Override the default DIO selector pins here, if needed.
177 177
   // Some pins files may provide defaults for these pins.
178 178
   //#define E_MUX0_PIN 40  // Always Required
179
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
180
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
179
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
180
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
181 181
 #endif
182 182
 
183 183
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Malyan/M200/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Micromake/C1/basic/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Mks/Sbase/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/RigidBot/Configuration.h Visa fil

@@ -174,8 +174,8 @@
174 174
   // Override the default DIO selector pins here, if needed.
175 175
   // Some pins files may provide defaults for these pins.
176 176
   //#define E_MUX0_PIN 40  // Always Required
177
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
178
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
177
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
178
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
179 179
 #endif
180 180
 
181 181
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/SCARA/Configuration.h Visa fil

@@ -202,8 +202,8 @@
202 202
   // Override the default DIO selector pins here, if needed.
203 203
   // Some pins files may provide defaults for these pins.
204 204
   //#define E_MUX0_PIN 40  // Always Required
205
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
206
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
205
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
206
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
207 207
 #endif
208 208
 
209 209
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/STM32F10/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/STM32F4/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Sanguinololu/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/TheBorg/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/TinyBoy2/Configuration.h Visa fil

@@ -193,8 +193,8 @@
193 193
   // Override the default DIO selector pins here, if needed.
194 194
   // Some pins files may provide defaults for these pins.
195 195
   //#define E_MUX0_PIN 40  // Always Required
196
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
197
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
196
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
197
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
198 198
 #endif
199 199
 
200 200
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Tronxy/X1/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Tronxy/X3A/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Tronxy/X5S/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Tronxy/XY100/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Velleman/K8200/Configuration.h Visa fil

@@ -191,8 +191,8 @@
191 191
   // Override the default DIO selector pins here, if needed.
192 192
   // Some pins files may provide defaults for these pins.
193 193
   //#define E_MUX0_PIN 40  // Always Required
194
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
195
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
194
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
195
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
196 196
 #endif
197 197
 
198 198
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Velleman/K8400/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/adafruit/ST7565/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h Visa fil

@@ -176,8 +176,8 @@
176 176
   // Override the default DIO selector pins here, if needed.
177 177
   // Some pins files may provide defaults for these pins.
178 178
   //#define E_MUX0_PIN 40  // Always Required
179
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
180
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
179
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
180
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
181 181
 #endif
182 182
 
183 183
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/delta/generic/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/delta/kossel_mini/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/delta/kossel_pro/Configuration.h Visa fil

@@ -175,8 +175,8 @@
175 175
   // Override the default DIO selector pins here, if needed.
176 176
   // Some pins files may provide defaults for these pins.
177 177
   //#define E_MUX0_PIN 40  // Always Required
178
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
179
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
178
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
179
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
180 180
 #endif
181 181
 
182 182
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/delta/kossel_xl/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h Visa fil

@@ -176,8 +176,8 @@
176 176
   // Override the default DIO selector pins here, if needed.
177 177
   // Some pins files may provide defaults for these pins.
178 178
   //#define E_MUX0_PIN 40  // Always Required
179
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
180
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
179
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
180
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
181 181
 #endif
182 182
 
183 183
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/makibox/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/stm32f103ret6/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/tvrrug/Round2/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

+ 2
- 2
Marlin/src/config/examples/wt150/Configuration.h Visa fil

@@ -171,8 +171,8 @@
171 171
   // Override the default DIO selector pins here, if needed.
172 172
   // Some pins files may provide defaults for these pins.
173 173
   //#define E_MUX0_PIN 40  // Always Required
174
-  //#define E_MUX1_PIN 42  // Needed for 3 to 8 steppers
175
-  //#define E_MUX2_PIN 44  // Needed for 5 to 8 steppers
174
+  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
175
+  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
176 176
 #endif
177 177
 
178 178
 // A dual extruder that uses a single stepper motor

Laddar…
Avbryt
Spara