The probe stowing coordinates have changed

Marlin/example_configurations/delta/kossel_pro/Configuration.h

 
 // This determines the communication speed of the printer
 // :[2400,9600,19200,38400,57600,115200,250000]
-#define BAUDRATE 250000
+#define BAUDRATE 115200
 
 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 // @section bedlevel
 
 
-//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
 //#define DEBUG_LEVELING_FEATURE
 //#define Z_MIN_PROBE_REPEATABILITY_TEST  // If not commented out, Z-Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
 
     #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_XYZ
     #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X -110.00 // Move outward to position deploy pin to the left of the arm
     #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y -125.00
-    #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
+    #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z Z_PROBE_ALLEN_KEY_DEPLOY_1_Z
     #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE HOMING_FEEDRATE_XYZ
     #define Z_PROBE_ALLEN_KEY_DEPLOY_3_X 45.00 // Move right to trigger deploy pin
     #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y -125.00
-    #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z 100.0
+    #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z Z_PROBE_ALLEN_KEY_DEPLOY_2_Z
     #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE (HOMING_FEEDRATE_XYZ/2)
 
     #define Z_PROBE_ALLEN_KEY_STOW_1_X 36.00 // Line up with bed retaining clip
-    #define Z_PROBE_ALLEN_KEY_STOW_1_Y -122.00
+    #define Z_PROBE_ALLEN_KEY_STOW_1_Y -125.00
     #define Z_PROBE_ALLEN_KEY_STOW_1_Z 75.0
     #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ
-    #define Z_PROBE_ALLEN_KEY_STOW_2_X 36.00 // move down to retract probe
-    #define Z_PROBE_ALLEN_KEY_STOW_2_Y -122.00
-    #define Z_PROBE_ALLEN_KEY_STOW_2_Z 25.0
+    #define Z_PROBE_ALLEN_KEY_STOW_2_X Z_PROBE_ALLEN_KEY_STOW_1_X // move down to retract probe
+    #define Z_PROBE_ALLEN_KEY_STOW_2_Y Z_PROBE_ALLEN_KEY_STOW_1_Y
+    #define Z_PROBE_ALLEN_KEY_STOW_2_Z 0.0
     #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ/2)
     #define Z_PROBE_ALLEN_KEY_STOW_3_X 0.0  // return to 0,0,100
     #define Z_PROBE_ALLEN_KEY_STOW_3_Y 0.0