Tweak mega tests

buildroot/share/tests/megaatmega2560-tests

            PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL
 opt_set TEMP_SENSOR_CHAMBER 3
 opt_set HEATER_CHAMBER_PIN 45
-exec_test $1 $2 "RAMPS, 2 extruders, LCD/SD, Probe, ABL-Linear, PLR, LEDs, many options"
+exec_test $1 $2 "RAMPS | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear | Advanced Pause | PLR | LEDs ..."
 
 #
 # Test a probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders
            MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE QUICK_HOME \
            LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \
            BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL
-exec_test $1 $2 "Azteeg X3 Pro with 5 extruders, RRDFGSC, probeless UBL, Linear Advance, and more"
+exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL Manual | LIN_ADVANCE ..."
 
 #
 # Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language
 #
-opt_enable Z_PROBE_SLED SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
+use_example_configs AnimationExample
+opt_set SHOW_CUSTOM_BOOTSCREEN
+opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
+opt_set LCD_LANGUAGE fr
+opt_set EXTRUDERS 5
+opt_set TEMP_SENSOR_1 1
+opt_set TEMP_SENSOR_2 5
+opt_set TEMP_SENSOR_3 20
+opt_set TEMP_SENSOR_4 1000
+opt_set TEMP_SENSOR_BED 1
+opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_VALIDATION ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION \
+           REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI STATUS_MESSAGE_SCROLLING BOOT_MARLIN_LOGO_SMALL \
+           SDSUPPORT SDCARD_SORT_ALPHA USB_FLASH_DRIVE_SUPPORT SCROLL_LONG_FILENAMES CANCEL_OBJECTS \
+           EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_USER_MENUS \
+           MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE QUICK_HOME \
+           LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \
+           BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL \
+           Z_PROBE_SLED SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
 opt_set LCD_LANGUAGE jp_kana
 opt_disable SEGMENT_LEVELED_MOVES
 opt_enable BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING BABYSTEP_HOTEND_Z_OFFSET BABYSTEP_DISPLAY_TOTAL M114_DETAIL
-exec_test $1 $2 "... Sled Z Probe, Skew, UBL Cartesian moves, Japanese, and Z probe BABYSTEPPING"
+exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL Manual | LIN_ADVANCE | Sled Probe | Skew | UBL Cartes. | JP-Kana | Babystep offsets ..."
 
 #
 # Test a Servo Probe
 opt_enable ZONESTAR_LCD Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE BOOT_MARLIN_LOGO_ANIMATED \
            AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT M114_DETAIL \
            NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET JOYSTICK
-exec_test $1 $2 "RAMPS with ZONESTAR_LCD, Servo Probe, 3-Point ABL, DEBUG_LEVELING_FEATURE, EEPROM, G38, and more"
+exec_test $1 $2 "RAMPS | ZONESTAR_LCD | Servo Probe | ABL 3-Pt | Debug Leveling | EEPROM | G38 ..."
 
 #
 # Test MINIRAMBO with PWM_MOTOR_CURRENT and many features
            PRINTCOUNTER SERVICE_NAME_1 SERVICE_INTERVAL_1 M114_DETAIL
 opt_set PWM_MOTOR_CURRENT "{ 1300, 1300, 1250 }"
 opt_set I2C_SLAVE_ADDRESS 63
-exec_test $1 $2 "MINIRAMBO with M100, PWM_MOTOR_CURRENT, PRINTCOUNTER, etc."
+exec_test $1 $2 "MINIRAMBO | Ultimaker LCD | M100 | PWM_MOTOR_CURRENT | PRINTCOUNTER | Advanced Pause ..."
 
 #
 # Mixing Extruder with 5 steppers, Cyrillic
 opt_enable MIXING_EXTRUDER GRADIENT_MIX GRADIENT_VTOOL CR10_STOCKDISPLAY
 opt_set MIXING_STEPPERS 5
 opt_set LCD_LANGUAGE ru
-exec_test $1 $2 "Mixing Extruder with 5 steppers, Cyrillic"
+exec_test $1 $2 "Azteeg X3 | Mixing Extruder (x5) | Gradient Mix | Cyrillic"
 
 #
 # Test DUAL_X_CARRIAGE
 opt_set EXTRUDERS 2
 opt_set TEMP_SENSOR_1 1
 opt_enable USE_XMAX_PLUG DUAL_X_CARRIAGE
-exec_test $1 $2 "DUAL_X_CARRIAGE"
+exec_test $1 $2 "Rumba | DUAL_X_CARRIAGE"
 
 #
 # Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER
 # Test many less common options
 #
 restore_configs
-opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
+opt_set MOTHERBOARD BOARD_MEGATRONICS_32
 opt_set LCD_LANGUAGE it
-opt_set EXTRUDERS 2
-opt_set TEMP_SENSOR_1 -4
+opt_set MIXING_STEPPERS 2
 opt_set SERVO_DELAY "{ 300, 300, 300 }"
-opt_enable COREYX USE_XMAX_PLUG \
-           REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING BABYSTEP_DISPLAY_TOTAL DAC_MOTOR_CURRENT_DEFAULT \
-           FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR \
-           ENDSTOP_INTERRUPTS_FEATURE ENDSTOP_NOISE_THRESHOLD FAN_SOFT_PWM SDSUPPORT \
-           SWITCHING_TOOLHEAD NUM_SERVOS DEBUG_LEVELING_FEATURE \
+opt_enable COREYX USE_XMAX_PLUG MIXING_EXTRUDER GRADIENT_MIX \
+           BABYSTEPPING BABYSTEP_DISPLAY_TOTAL FILAMENT_LCD_DISPLAY \
+           REPRAP_DISCOUNT_SMART_CONTROLLER MENU_ADDAUTOSTART SDSUPPORT SDCARD_SORT_ALPHA \
+           ENDSTOP_INTERRUPTS_FEATURE ENDSTOP_NOISE_THRESHOLD FAN_SOFT_PWM \
+           AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE FILAMENT_WIDTH_SENSOR \
            SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER \
-           SD_ABORT_ON_ENDSTOP_HIT ADVANCED_OK M114_DETAIL \
-           VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL \
-           EXTRA_FAN_SPEED FWRETRACT MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
+           SD_ABORT_ON_ENDSTOP_HIT HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT ADVANCED_OK M114_DETAIL \
+           VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL EXTRA_FAN_SPEED FWRETRACT
 opt_set FAN_MIN_PWM 50
 opt_set FAN_KICKSTART_TIME 100
-opt_set XY_FREQUENCY_LIMIT  15
-exec_test $1 $2 "Many less common options"
+opt_set XY_FREQUENCY_LIMIT 15
+opt_add FILWIDTH_PIN 5
+exec_test $1 $2 "Megatronics 3.2 | Gradient Mix | Endstop Int. | Home Y > X | FW Retract ..."
 
 ######## Other Standard LCD/Panels ##############
 #
 use_example_configs delta/generic
 opt_set LCD_LANGUAGE cz
 opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH BLTOUCH_FORCE_5V_MODE
-exec_test $1 $2 "Delta Config (generic) + ABL bilinear + BLTOUCH"
+exec_test $1 $2 "RAMPS | DELTA | RRD LCD | ABL Bilinear | BLTOUCH"
 
 #
 # Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS
 opt_set LCD_LANGUAGE ko_KR
 opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT \
            OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY
-exec_test $1 $2 "Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS"
+exec_test $1 $2 "RAMPS | DELTA | OLED_PANEL_TINYBOY2 | UBL | Allen Key | EEPROM"
 
 #
 # Delta Config (FLSUN AC because it's complex)
 #
 use_example_configs delta/FLSUN/auto_calibrate
-exec_test $1 $2 "Delta Config (FLSUN AC because it's complex)"
+exec_test $1 $2 "RAMPS 1.3 | DELTA | FLSUN AC Config"
 
 #
 # Makibox Config  need to check board type for Teensy++ 2.0
 use_example_configs SCARA
 opt_set LCD_LANGUAGE es
 opt_enable USE_ZMIN_PLUG FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR PAUSE_BEFORE_DEPLOY_STOW \
-           EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER M114_DETAIL \
+           MKS_12864OLED EEPROM_SETTINGS EEPROM_CHITCHAT M114_DETAIL \
            MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z STEALTHCHOP_E HYBRID_THRESHOLD SENSORLESS_HOMING SQUARE_WAVE_STEPPING
 opt_set X_MAX_ENDSTOP_INVERTING false
 opt_set X_DRIVER_TYPE TMC2209
 opt_set Y_DRIVER_TYPE TMC2130
 opt_set Z_DRIVER_TYPE TMC2130
 opt_set E0_DRIVER_TYPE TMC2660
-exec_test $1 $2 "SCARA with TMC2130, TMC2209, and TMC2660"
+exec_test $1 $2 "RAMPS | SCARA | Mixed TMC | EEPROM"
 
 #
 # Test mixed TMC config
            MARLIN_BRICKOUT MARLIN_INVADERS MARLIN_SNAKE \
            MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z STEALTHCHOP_E HYBRID_THRESHOLD \
            USE_ZMIN_PLUG SENSORLESS_HOMING TMC_DEBUG M114_DETAIL
-exec_test $1 $2 "Mixed TMC configuration, with games!"
+exec_test $1 $2 "RAMPS | Mixed TMC | Sensorless | RRDFGSC | Games"
 
 #
 # tvrrug Config need to check board type for sanguino atmega644p