Add option to disable fan speed slowing in M303 (#13066)

Marlin/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/default/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Anet/A2/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 10    // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 10    // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/AnyCubic/i3/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/ArmEd/Configuration_adv.h

@@ -82,6 +82,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 2     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 2     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Cartesio/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Einstart-S/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Felix/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/FlashForge/CreatorPro/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 2     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 2     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 10    // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 10    // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/MakerParts/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Malyan/M200/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Mks/Robin/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 6     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/RapideLite/RL200/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/RigidBot/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/SCARA/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/TheBorg/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 6     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/VORONDesign/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -88,6 +88,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 8     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/WASP/PowerWASP/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 6     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 10     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 3     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/makibox/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/config/examples/wt150/Configuration_adv.h

@@ -78,6 +78,9 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the

Marlin/src/inc/Conditionals_post.h

@@ -1260,11 +1260,14 @@
 #endif
 
 /**
- * Heater & Fan Pausing
+ * Heater, Fan, and Probe interactions
  */
 #if FAN_COUNT == 0
   #undef PROBING_FANS_OFF
+  #undef ADAPTIVE_FAN_SLOWING
+  #undef NO_FAN_SLOWING_IN_PID_TUNING
 #endif
+
 #define QUIET_PROBING (HAS_BED_PROBE && (ENABLED(PROBING_HEATERS_OFF) || ENABLED(PROBING_FANS_OFF) || DELAY_BEFORE_PROBING > 0))
 #define HEATER_IDLE_HANDLER (ENABLED(ADVANCED_PAUSE_FEATURE) || ENABLED(PROBING_HEATERS_OFF))
 

Marlin/src/module/temperature.cpp

@@ -96,6 +96,10 @@ Temperature thermalManager;
 
 // public:
 
+#if ENABLED(NO_FAN_SLOWING_IN_PID_TUNING)
+  bool Temperature::adaptive_fan_slowing = true;
+#endif
+
 float Temperature::current_temperature[HOTENDS]; // = { 0.0 };
 int16_t Temperature::current_temperature_raw[HOTENDS], // = { 0 }
         Temperature::target_temperature[HOTENDS]; // = { 0 }
@@ -392,6 +396,10 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS];
       LEDColor color = ONHEATINGSTART();
     #endif
 
+    #if ENABLED(NO_FAN_SLOWING_IN_PID_TUNING)
+      adaptive_fan_slowing = false;
+    #endif
+
     // PID Tuning loop
     while (wait_for_heatup) {
 
@@ -570,18 +578,27 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS];
             _SET_BED_PID();
           #endif
         }
+
         #if ENABLED(PRINTER_EVENT_LEDS)
           printerEventLEDs.onPidTuningDone(color);
         #endif
 
-        return;
+        goto EXIT_M303;
       }
       ui.update();
     }
+
     disable_all_heaters();
+
     #if ENABLED(PRINTER_EVENT_LEDS)
       printerEventLEDs.onPidTuningDone(color);
     #endif
+
+    EXIT_M303:
+      #if ENABLED(NO_FAN_SLOWING_IN_PID_TUNING)
+        adaptive_fan_slowing = true;
+      #endif
+      return;
   }
 
 #endif // HAS_PID_HEATING
@@ -1627,8 +1644,8 @@ void Temperature::init() {
       // While the temperature is stable watch for a bad temperature
       case TRStable:
 
-        #if ENABLED(ADAPTIVE_FAN_SLOWING) && FAN_COUNT > 0
-          if (heater_id >= 0) {
+        #if ENABLED(ADAPTIVE_FAN_SLOWING)
+          if (adaptive_fan_slowing && heater_id >= 0) {
             const int fan_index = MIN(heater_id, FAN_COUNT - 1);
             if (fan_speed[fan_index] == 0 || current >= tr_target_temperature[heater_id] - (hysteresis_degc * 0.25f))
               fan_speed_scaler[fan_index] = 128;

Marlin/src/module/temperature.h

@@ -565,6 +565,12 @@ class Temperature {
     #if HAS_PID_HEATING
       static void PID_autotune(const float &target, const int8_t hotend, const int8_t ncycles, const bool set_result=false);
 
+      #if ENABLED(NO_FAN_SLOWING_IN_PID_TUNING)
+        static bool adaptive_fan_slowing;
+      #elif ENABLED(ADAPTIVE_FAN_SLOWING)
+        constexpr static bool adaptive_fan_slowing = true;
+      #endif
+
       /**
        * Update the temp manager when PID values change
        */

buildroot/share/tests/LPC1768_tests

@@ -36,7 +36,7 @@ opt_set EXTRUDERS 2
 opt_set TEMP_SENSOR_0 1
 opt_set TEMP_SENSOR_1 5
 opt_set TEMP_SENSOR_BED 1
-opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT ADAPTIVE_FAN_SLOWING \
+opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
            FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY \
            FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
            BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \