thomas
/
marlin
Suivre 1
Favoriser 0
Bifurcation 0
Code Tickets 0 Demandes d'ajout 0 Versions 0 Wiki Activité
Parcourir la source

Remove extraneous whitespace

Scott Lahteine il y a 8 ans
Parent
d15f25539b
révision
77491dd924
22 fichiers modifiés avec 41 ajouts et 41 suppressions
Vue séparée Afficher les stats Diff
  1. 2
    2
      Marlin/Configuration_adv.h
  2. 2
    2
      Marlin/Makefile
  3. 2
    2
      Marlin/example_configurations/Cartesio/Configuration_adv.h
  4. 2
    2
      Marlin/example_configurations/Felix/Configuration_adv.h
  5. 2
    2
      Marlin/example_configurations/Hephestos/Configuration_adv.h
  6. 2
    2
      Marlin/example_configurations/Hephestos_2/Configuration_adv.h
  7. 2
    2
      Marlin/example_configurations/K8200/Configuration_adv.h
  8. 2
    2
      Marlin/example_configurations/K8400/Configuration_adv.h
  9. 2
    2
      Marlin/example_configurations/RigidBot/Configuration_adv.h
  10. 2
    2
      Marlin/example_configurations/SCARA/Configuration_adv.h
  11. 2
    2
      Marlin/example_configurations/TAZ4/Configuration_adv.h
  12. 2
    2
      Marlin/example_configurations/WITBOX/Configuration_adv.h
  13. 2
    2
      Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h
  14. 2
    2
      Marlin/example_configurations/delta/generic/Configuration_adv.h
  15. 2
    2
      Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
  16. 2
    2
      Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
  17. 2
    2
      Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
  18. 2
    2
      Marlin/example_configurations/makibox/Configuration_adv.h
  19. 2
    2
      Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
  20. 1
    1
      Marlin/pinsDebug_Teensyduino.h
  21. 1
    1
      Marlin/stepper_dac.cpp
  22. 1
    1
      Marlin/temperature.cpp

+ 2
- 2
Marlin/Configuration_adv.h Voir le fichier 

@@ -848,7 +848,7 @@
848 848 
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
849 849 
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
850 850 
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
851 
-   */
851 
+   */
852 852 
   //#define AUTOMATIC_CURRENT_CONTROL
853 853 
   #define CURRENT_STEP          50  // [mA]
854 854 
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
 
@@ -1063,7 +1063,7 @@
1063 1063 
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
1064 1064 
  *
1065 1065 
  * M200 D0 to disable, M200 Dn to set a new diameter.
1066 
- */
1066 
+ */
1067 1067 
 //#define VOLUMETRIC_DEFAULT_ON
1068 1068
1069 1069 
 /**

+ 2
- 2
Marlin/Makefile Voir le fichier 

@@ -45,7 +45,7 @@
45 45 
 #
46 46 
 #   make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
47 47 
 #   HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino upload
48 
-#
48 
+#
49 49 
 # If uploading doesn't work try adding the parameter "AVRDUDE_PROGRAMMER=wiring" or
50 50 
 # start upload manually (using stk500) like so:
51 51 
 #
 
@@ -69,7 +69,7 @@ AVR_TOOLS_PATH ?=
69 69 
 #Programmer configuration
70 70 
 UPLOAD_RATE        ?= 57600
71 71 
 AVRDUDE_PROGRAMMER ?= arduino
72 
-# on most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1
72 
+# on most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1
73 73 
 UPLOAD_PORT        ?= /dev/ttyUSB0
74 74
75 75 
 #Directory used to build files in, contains all the build files, from object files to the final hex file

+ 2
- 2
Marlin/example_configurations/Cartesio/Configuration_adv.h Voir le fichier 

@@ -845,7 +845,7 @@
845 845 
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
846 846 
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
847 847 
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
848 
-   */
848 
+   */
849 849 
   //#define AUTOMATIC_CURRENT_CONTROL
850 850 
   #define CURRENT_STEP          50  // [mA]
851 851 
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
 
@@ -1060,7 +1060,7 @@
1060 1060 
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
1061 1061 
  *
1062 1062 
  * M200 D0 to disable, M200 Dn to set a new diameter.
1063 
- */
1063 
+ */
1064 1064 
 //#define VOLUMETRIC_DEFAULT_ON
1065 1065
1066 1066 
 /**

+ 2
- 2
Marlin/example_configurations/Felix/Configuration_adv.h Voir le fichier 

@@ -845,7 +845,7 @@
845 845 
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
846 846 
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
847 847 
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
848 
-   */
848 
+   */
849 849 
   //#define AUTOMATIC_CURRENT_CONTROL
850 850 
   #define CURRENT_STEP          50  // [mA]
851 851 
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
 
@@ -1060,7 +1060,7 @@
1060 1060 
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
1061 1061 
  *
1062 1062 
  * M200 D0 to disable, M200 Dn to set a new diameter.
1063 
- */
1063 
+ */
1064 1064 
 //#define VOLUMETRIC_DEFAULT_ON
1065 1065
1066 1066 
 /**

+ 2
- 2
Marlin/example_configurations/Hephestos/Configuration_adv.h Voir le fichier 

@@ -845,7 +845,7 @@
845 845 
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
846 846 
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
847 847 
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
848 
-   */
848 
+   */
849 849 
   //#define AUTOMATIC_CURRENT_CONTROL
850 850 
   #define CURRENT_STEP          50  // [mA]
851 851 
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
 
@@ -1060,7 +1060,7 @@
1060 1060 
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
1061 1061 
  *
1062 1062 
  * M200 D0 to disable, M200 Dn to set a new diameter.
1063 
- */
1063 
+ */
1064 1064 
 //#define VOLUMETRIC_DEFAULT_ON
1065 1065
1066 1066 
 /**

+ 2
- 2
Marlin/example_configurations/Hephestos_2/Configuration_adv.h Voir le fichier 

@@ -828,7 +828,7 @@
828 828 
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
829 829 
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
830 830 
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
831 
-   */
831 
+   */
832 832 
   //#define AUTOMATIC_CURRENT_CONTROL
833 833 
   #define CURRENT_STEP          50  // [mA]
834 834 
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
 
@@ -1043,7 +1043,7 @@
1043 1043 
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
1044 1044 
  *
1045 1045 
  * M200 D0 to disable, M200 Dn to set a new diameter.
1046 
- */
1046 
+ */
1047 1047 
 //#define VOLUMETRIC_DEFAULT_ON
1048 1048
1049 1049 
 /**

+ 2
- 2
Marlin/example_configurations/K8200/Configuration_adv.h Voir le fichier 

@@ -858,7 +858,7 @@
858 858 
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
859 859 
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
860 860 
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
861 
-   */
861 
+   */
862 862 
   //#define AUTOMATIC_CURRENT_CONTROL
863 863 
   #define CURRENT_STEP          50  // [mA]
864 864 
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
 
@@ -1073,7 +1073,7 @@
1073 1073 
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
1074 1074 
  *
1075 1075 
  * M200 D0 to disable, M200 Dn to set a new diameter.
1076 
- */
1076 
+ */
1077 1077 
 //#define VOLUMETRIC_DEFAULT_ON
1078 1078
1079 1079 
 /**

+ 2
- 2
Marlin/example_configurations/K8400/Configuration_adv.h Voir le fichier 

@@ -845,7 +845,7 @@
845 845 
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
846 846 
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
847 847 
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
848 
-   */
848 
+   */
849 849 
   //#define AUTOMATIC_CURRENT_CONTROL
850 850 
   #define CURRENT_STEP          50  // [mA]
851 851 
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
 
@@ -1060,7 +1060,7 @@
1060 1060 
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
1061 1061 
  *
1062 1062 
  * M200 D0 to disable, M200 Dn to set a new diameter.
1063 
- */
1063 
+ */
1064 1064 
 //#define VOLUMETRIC_DEFAULT_ON
1065 1065
1066 1066 
 /**

+ 2
- 2
Marlin/example_configurations/RigidBot/Configuration_adv.h Voir le fichier 

@@ -845,7 +845,7 @@
845 845 
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
846 846 
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
847 847 
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
848 
-   */
848 
+   */
849 849 
   //#define AUTOMATIC_CURRENT_CONTROL
850 850 
   #define CURRENT_STEP          50  // [mA]
851 851 
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
 
@@ -1060,7 +1060,7 @@
1060 1060 
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
1061 1061 
  *
1062 1062 
  * M200 D0 to disable, M200 Dn to set a new diameter.
1063 
- */
1063 
+ */
1064 1064 
 //#define VOLUMETRIC_DEFAULT_ON
1065 1065
1066 1066 
 /**

+ 2
- 2
Marlin/example_configurations/SCARA/Configuration_adv.h Voir le fichier 

@@ -845,7 +845,7 @@
845 845 
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
846 846 
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
847 847 
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
848 
-   */
848 
+   */
849 849 
   //#define AUTOMATIC_CURRENT_CONTROL
850 850 
   #define CURRENT_STEP          50  // [mA]
851 851 
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
 
@@ -1060,7 +1060,7 @@
1060 1060 
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
1061 1061 
  *
1062 1062 
  * M200 D0 to disable, M200 Dn to set a new diameter.
1063 
- */
1063 
+ */
1064 1064 
 //#define VOLUMETRIC_DEFAULT_ON
1065 1065
1066 1066 
 /**

+ 2
- 2
Marlin/example_configurations/TAZ4/Configuration_adv.h Voir le fichier 

@@ -853,7 +853,7 @@
853 853 
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
854 854 
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
855 855 
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
856 
-   */
856 
+   */
857 857 
   //#define AUTOMATIC_CURRENT_CONTROL
858 858 
   #define CURRENT_STEP          50  // [mA]
859 859 
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
 
@@ -1068,7 +1068,7 @@
1068 1068 
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
1069 1069 
  *
1070 1070 
  * M200 D0 to disable, M200 Dn to set a new diameter.
1071 
- */
1071 
+ */
1072 1072 
 //#define VOLUMETRIC_DEFAULT_ON
1073 1073
1074 1074 
 /**

+ 2
- 2
Marlin/example_configurations/WITBOX/Configuration_adv.h Voir le fichier 

@@ -845,7 +845,7 @@
845 845 
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
846 846 
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
847 847 
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
848 
-   */
848 
+   */
849 849 
   //#define AUTOMATIC_CURRENT_CONTROL
850 850 
   #define CURRENT_STEP          50  // [mA]
851 851 
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
 
@@ -1060,7 +1060,7 @@
1060 1060 
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
1061 1061 
  *
1062 1062 
  * M200 D0 to disable, M200 Dn to set a new diameter.
1063 
- */
1063 
+ */
1064 1064 
 //#define VOLUMETRIC_DEFAULT_ON
1065 1065
1066 1066 
 /**

+ 2
- 2
Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h Voir le fichier 

@@ -850,7 +850,7 @@
850 850 
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
851 851 
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
852 852 
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
853 
-   */
853 
+   */
854 854 
   //#define AUTOMATIC_CURRENT_CONTROL
855 855 
   #define CURRENT_STEP          50  // [mA]
856 856 
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
 
@@ -1065,7 +1065,7 @@
1065 1065 
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
1066 1066 
  *
1067 1067 
  * M200 D0 to disable, M200 Dn to set a new diameter.
1068 
- */
1068 
+ */
1069 1069 
 //#define VOLUMETRIC_DEFAULT_ON
1070 1070
1071 1071 
 /**

+ 2
- 2
Marlin/example_configurations/delta/generic/Configuration_adv.h Voir le fichier 

@@ -847,7 +847,7 @@
847 847 
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
848 848 
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
849 849 
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
850 
-   */
850 
+   */
851 851 
   //#define AUTOMATIC_CURRENT_CONTROL
852 852 
   #define CURRENT_STEP          50  // [mA]
853 853 
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
 
@@ -1062,7 +1062,7 @@
1062 1062 
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
1063 1063 
  *
1064 1064 
  * M200 D0 to disable, M200 Dn to set a new diameter.
1065 
- */
1065 
+ */
1066 1066 
 //#define VOLUMETRIC_DEFAULT_ON
1067 1067
1068 1068 
 /**

+ 2
- 2
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h Voir le fichier 

@@ -847,7 +847,7 @@
847 847 
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
848 848 
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
849 849 
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
850 
-   */
850 
+   */
851 851 
   //#define AUTOMATIC_CURRENT_CONTROL
852 852 
   #define CURRENT_STEP          50  // [mA]
853 853 
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
 
@@ -1062,7 +1062,7 @@
1062 1062 
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
1063 1063 
  *
1064 1064 
  * M200 D0 to disable, M200 Dn to set a new diameter.
1065 
- */
1065 
+ */
1066 1066 
 //#define VOLUMETRIC_DEFAULT_ON
1067 1067
1068 1068 
 /**

+ 2
- 2
Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h Voir le fichier 

@@ -852,7 +852,7 @@
852 852 
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
853 853 
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
854 854 
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
855 
-   */
855 
+   */
856 856 
   //#define AUTOMATIC_CURRENT_CONTROL
857 857 
   #define CURRENT_STEP          50  // [mA]
858 858 
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
 
@@ -1067,7 +1067,7 @@
1067 1067 
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
1068 1068 
  *
1069 1069 
  * M200 D0 to disable, M200 Dn to set a new diameter.
1070 
- */
1070 
+ */
1071 1071 
 //#define VOLUMETRIC_DEFAULT_ON
1072 1072
1073 1073 
 /**

+ 2
- 2
Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h Voir le fichier 

@@ -847,7 +847,7 @@
847 847 
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
848 848 
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
849 849 
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
850 
-   */
850 
+   */
851 851 
   //#define AUTOMATIC_CURRENT_CONTROL
852 852 
   #define CURRENT_STEP          50  // [mA]
853 853 
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
 
@@ -1062,7 +1062,7 @@
1062 1062 
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
1063 1063 
  *
1064 1064 
  * M200 D0 to disable, M200 Dn to set a new diameter.
1065 
- */
1065 
+ */
1066 1066 
 //#define VOLUMETRIC_DEFAULT_ON
1067 1067
1068 1068 
 /**

+ 2
- 2
Marlin/example_configurations/makibox/Configuration_adv.h Voir le fichier 

@@ -845,7 +845,7 @@
845 845 
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
846 846 
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
847 847 
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
848 
-   */
848 
+   */
849 849 
   //#define AUTOMATIC_CURRENT_CONTROL
850 850 
   #define CURRENT_STEP          50  // [mA]
851 851 
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
 
@@ -1060,7 +1060,7 @@
1060 1060 
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
1061 1061 
  *
1062 1062 
  * M200 D0 to disable, M200 Dn to set a new diameter.
1063 
- */
1063 
+ */
1064 1064 
 //#define VOLUMETRIC_DEFAULT_ON
1065 1065
1066 1066 
 /**

+ 2
- 2
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h Voir le fichier 

@@ -845,7 +845,7 @@
845 845 
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
846 846 
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
847 847 
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
848 
-   */
848 
+   */
849 849 
   //#define AUTOMATIC_CURRENT_CONTROL
850 850 
   #define CURRENT_STEP          50  // [mA]
851 851 
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
 
@@ -1060,7 +1060,7 @@
1060 1060 
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
1061 1061 
  *
1062 1062 
  * M200 D0 to disable, M200 Dn to set a new diameter.
1063 
- */
1063 
+ */
1064 1064 
 //#define VOLUMETRIC_DEFAULT_ON
1065 1065
1066 1066 
 /**

+ 1
- 1
Marlin/pinsDebug_Teensyduino.h Voir le fichier 

@@ -19,7 +19,7 @@
19 19 
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
20 20 
  *
21 21 
  */
22 
-
22 
+
23 23 
 //
24 24 
 //  some of the pin mapping functions of the Teensduino extension to the Arduino IDE
25 25 
 //  do not function the same as the other Arduino extensions

+ 1
- 1
Marlin/stepper_dac.cpp Voir le fichier 

@@ -64,7 +64,7 @@
64 64
65 65 
     mcp4728_setVref_all(DAC_STEPPER_VREF);
66 66 
     mcp4728_setGain_all(DAC_STEPPER_GAIN);
67 
-
67 
+
68 68 
     if (mcp4728_getDrvPct(0) < 1 || mcp4728_getDrvPct(1) < 1 || mcp4728_getDrvPct(2) < 1 || mcp4728_getDrvPct(3) < 1 ) {
69 69 
       mcp4728_setDrvPct(dac_channel_pct);
70 70 
       mcp4728_eepromWrite();

+ 1
- 1
Marlin/temperature.cpp Voir le fichier 

@@ -1491,7 +1491,7 @@ void Temperature::isr() {
1491 1491 
   // at the end of its run, potentially causing re-entry. This flag prevents it.
1492 1492 
   if (in_temp_isr) return;
1493 1493 
   in_temp_isr = true;
1494 
-
1494 
+
1495 1495 
   // Allow UART and stepper ISRs
1496 1496 
   CBI(TIMSK0, OCIE0B); //Disable Temperature ISR
1497 1497 
   sei();

Écrire Aperçu
Chargement…
Annuler
Enregistrer