✨ MEDIA_MENU_AT_TOP for MarlinUI (#21925)

Marlin/Configuration_adv.h

@@ -1301,6 +1301,8 @@
 
   //#define BROWSE_MEDIA_ON_INSERT          // Open the file browser when media is inserted
 
+  //#define MEDIA_MENU_AT_TOP               // Force the media menu to be listed on the top of the main menu
+
   #define EVENT_GCODE_SD_ABORT "G28XY"      // G-code to run on SD Abort Print (e.g., "G28XY" or "G27")
 
   #if ENABLED(PRINTER_EVENT_LEDS)

Marlin/src/lcd/menu/menu_main.cpp

@@ -254,6 +254,38 @@ void menu_main() {
   START_MENU();
   BACK_ITEM(MSG_INFO_SCREEN);
 
+  #if ENABLED(SDSUPPORT)
+
+    #if !defined(MEDIA_MENU_AT_TOP) && !HAS_ENCODER_WHEEL
+      #define MEDIA_MENU_AT_TOP
+    #endif
+
+    auto sdcard_menu_items = [&]{
+      #if ENABLED(MENU_ADDAUTOSTART)
+        ACTION_ITEM(MSG_RUN_AUTO_FILES, card.autofile_begin); // Run Auto Files
+      #endif
+
+      if (card_detected) {
+        if (!card_open) {
+          #if PIN_EXISTS(SD_DETECT)
+            GCODES_ITEM(MSG_CHANGE_MEDIA, PSTR("M21"));       // M21 Change Media
+          #else                                               // - or -
+            GCODES_ITEM(MSG_RELEASE_MEDIA, PSTR("M22"));      // M22 Release Media
+          #endif
+          SUBMENU(MSG_MEDIA_MENU, MEDIA_MENU_GATEWAY);        // Media Menu (or Password First)
+        }
+      }
+      else {
+        #if PIN_EXISTS(SD_DETECT)
+          ACTION_ITEM(MSG_NO_MEDIA, nullptr);                 // "No Media"
+        #else
+          GCODES_ITEM(MSG_ATTACH_MEDIA, PSTR("M21"));         // M21 Attach Media
+        #endif
+      }
+    };
+
+  #endif
+
   if (busy) {
     #if MACHINE_CAN_PAUSE
       ACTION_ITEM(MSG_PAUSE_PRINT, ui.pause_print);
@@ -281,36 +313,9 @@ void menu_main() {
   }
   else {
 
-    #if !HAS_ENCODER_WHEEL && ENABLED(SDSUPPORT)
-
-      // *** IF THIS SECTION IS CHANGED, REPRODUCE BELOW ***
-
-      //
-      // Run Auto Files
-      //
-      #if ENABLED(MENU_ADDAUTOSTART)
-        ACTION_ITEM(MSG_RUN_AUTO_FILES, card.autofile_begin);
-      #endif
-
-      if (card_detected) {
-        if (!card_open) {
-          SUBMENU(MSG_MEDIA_MENU, MEDIA_MENU_GATEWAY);
-          #if PIN_EXISTS(SD_DETECT)
-            GCODES_ITEM(MSG_CHANGE_MEDIA, PSTR("M21"));
-          #else
-            GCODES_ITEM(MSG_RELEASE_MEDIA, PSTR("M22"));
-          #endif
-        }
-      }
-      else {
-        #if PIN_EXISTS(SD_DETECT)
-          ACTION_ITEM(MSG_NO_MEDIA, nullptr);
-        #else
-          GCODES_ITEM(MSG_ATTACH_MEDIA, PSTR("M21"));
-        #endif
-      }
-
-    #endif // !HAS_ENCODER_WHEEL && SDSUPPORT
+    #if BOTH(SDSUPPORT, MEDIA_MENU_AT_TOP)
+      sdcard_menu_items();
+    #endif
 
     if (TERN0(MACHINE_CAN_PAUSE, printingIsPaused()))
       ACTION_ITEM(MSG_RESUME_PRINT, ui.resume_print);
@@ -387,39 +392,9 @@ void menu_main() {
       GCODES_ITEM(MSG_SWITCH_PS_ON, PSTR("M80"));
   #endif
 
-  #if BOTH(HAS_ENCODER_WHEEL, SDSUPPORT)
-
-    if (!busy) {
-
-      // *** IF THIS SECTION IS CHANGED, REPRODUCE ABOVE ***
-
-      //
-      // Autostart
-      //
-      #if ENABLED(MENU_ADDAUTOSTART)
-        ACTION_ITEM(MSG_RUN_AUTO_FILES, card.autofile_begin);
-      #endif
-
-      if (card_detected) {
-        if (!card_open) {
-          #if PIN_EXISTS(SD_DETECT)
-            GCODES_ITEM(MSG_CHANGE_MEDIA, PSTR("M21"));
-          #else
-            GCODES_ITEM(MSG_RELEASE_MEDIA, PSTR("M22"));
-          #endif
-          SUBMENU(MSG_MEDIA_MENU, MEDIA_MENU_GATEWAY);
-        }
-      }
-      else {
-        #if PIN_EXISTS(SD_DETECT)
-          ACTION_ITEM(MSG_NO_MEDIA, nullptr);
-        #else
-          GCODES_ITEM(MSG_ATTACH_MEDIA, PSTR("M21"));
-        #endif
-      }
-    }
-
-  #endif // HAS_ENCODER_WHEEL && SDSUPPORT
+  #if ENABLED(SDSUPPORT) && DISABLED(MEDIA_MENU_AT_TOP)
+    sdcard_menu_items();
+  #endif
 
   #if HAS_SERVICE_INTERVALS
     static auto _service_reset = [](const int index) {

buildroot/tests/mega2560

@@ -20,8 +20,8 @@ opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO LCD_LANGUAGE fr \
         EXTRUDERS 5 TEMP_SENSOR_1 1 TEMP_SENSOR_2 5 TEMP_SENSOR_3 20 TEMP_SENSOR_4 1000 TEMP_SENSOR_BED 1
 opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_VALIDATION ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION \
            REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI STATUS_MESSAGE_SCROLLING SHOW_CUSTOM_BOOTSCREEN BOOT_MARLIN_LOGO_SMALL \
-           SDSUPPORT SDCARD_SORT_ALPHA USB_FLASH_DRIVE_SUPPORT AUTO_REPORT_SD_STATUS SCROLL_LONG_FILENAMES CANCEL_OBJECTS SOUND_MENU_ITEM \
-           EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_MENU_MAIN FREEZE_FEATURE \
+           SDSUPPORT SDCARD_SORT_ALPHA USB_FLASH_DRIVE_SUPPORT AUTO_REPORT_SD_STATUS SCROLL_LONG_FILENAMES MEDIA_MENU_AT_TOP \
+           EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_MENU_MAIN FREEZE_FEATURE CANCEL_OBJECTS SOUND_MENU_ITEM \
            MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE EXTRA_LIN_ADVANCE_K QUICK_HOME \
            LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \
            BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL