M701 / M702 language changes

Marlin/src/lcd/language/language_an.h

 #define MSG_DRIVE_STRENGTH                  _UxGT("Fuerza d'o driver")
 #define MSG_DAC_PERCENT                     _UxGT("Driver %")
 #define MSG_DAC_EEPROM_WRITE                _UxGT("Escri. DAC EEPROM")
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("PRINT PAUSED")
-#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("RESUME OPTIONS:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Extruir mas")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Resumir imp.")
 
 //
 #define MSG_FILAMENT_CHANGE_UNLOAD_2        _UxGT("expulsar filament")
 #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Aguardando a")
 #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("cargar filamento")
-#define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Aguardando a")
-#define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("extruir filamento")
 #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Aguardando impre.")
 #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("pa continar")
 

Marlin/src/lcd/language/language_ca.h

 #define MSG_DRIVE_STRENGTH                  _UxGT("Força motor")
 #define MSG_DAC_PERCENT                     _UxGT("Driver %")
 #define MSG_DAC_EEPROM_WRITE                _UxGT("DAC EEPROM Write")
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("PRINT PAUSED")
-#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("RESUME OPTIONS:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Extrudeix mes")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Repren impressió")
-#define MSG_FILAMENT_CHANGE_MINTEMP         _UxGT("Temp minima es ")
 
 //
 // Filament Change screens show up to 3 lines on a 4-line display
   #define MSG_FILAMENT_CHANGE_HEATING_2       _UxGT("Espereu...")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Esperant carrega")
   #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("de filament")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Esperant per")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("extreure filament")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Esperant per")
   #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("reprendre")
 #else // LCD_HEIGHT < 4
   #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Insereix i prem")
   #define MSG_FILAMENT_CHANGE_HEATING_1       _UxGT("Escalfant...")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Carregant...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Extrudint...")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Reprenent...")
 #endif // LCD_HEIGHT < 4
 

Marlin/src/lcd/language/language_cz.h

 #define MSG_DRIVE_STRENGTH                  _UxGT("Buzeni motoru")
 #define MSG_DAC_PERCENT                     _UxGT("Motor %")
 #define MSG_DAC_EEPROM_WRITE                _UxGT("Ulozit do EEPROM")
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("PRINT PAUSED")
-#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("RESUME OPTIONS:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Jeste vytlacit")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Obnovit tisk")
-#define MSG_FILAMENT_CHANGE_MINTEMP         _UxGT("Min. teplota je ")
 #define MSG_FILAMENT_CHANGE_NOZZLE          _UxGT("  Tryska: ")
 #define MSG_ERR_HOMING_FAILED               _UxGT("Parkovani selhalo")
 #define MSG_ERR_PROBING_FAILED              _UxGT("Kalibrace selhala")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Cekejte prosim")
   #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("na zavedeni")
   #define MSG_FILAMENT_CHANGE_LOAD_3          _UxGT("filamentu")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Cekejte prosim")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("na vytlaceni")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_3       _UxGT("filamentu")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Cekejte prosim")
   #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("na pokracovani")
   #define MSG_FILAMENT_CHANGE_RESUME_3        _UxGT("tisku")
   #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Vlozte, kliknete")
   #define MSG_FILAMENT_CHANGE_HEATING_1       _UxGT("Nahrivani...")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Zavadeni...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Vytlacovani...")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Pokracovani...")
 #endif // LCD_HEIGHT < 4
 

Marlin/src/lcd/language/language_cz_utf8.h

 #define MSG_DRIVE_STRENGTH                  _UxGT("Buzení motorů")
 #define MSG_DAC_PERCENT                     _UxGT("Motor %")
 #define MSG_DAC_EEPROM_WRITE                _UxGT("Uložit do EEPROM")
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("PRINT PAUSED")
-#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("RESUME OPTIONS:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Ještě vytlačit")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Obnovit tisk")
-#define MSG_FILAMENT_CHANGE_MINTEMP         _UxGT("Min. teplota je ")
 #define MSG_FILAMENT_CHANGE_NOZZLE          _UxGT("  Tryska: ")
 #define MSG_ERR_HOMING_FAILED               _UxGT("Parkování selhalo")
 #define MSG_ERR_PROBING_FAILED              _UxGT("Kalibrace selhala")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Čekejte prosím")
   #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("na zavedení")
   #define MSG_FILAMENT_CHANGE_LOAD_3          _UxGT("filamentu")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Čekejte prosím")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("na vytlačení")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_3       _UxGT("filamentu")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Čekejte prosím")
   #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("na pokračování")
   #define MSG_FILAMENT_CHANGE_RESUME_3        _UxGT("tisku")
   #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Vložte, klikněte")
   #define MSG_FILAMENT_CHANGE_HEATING_1       _UxGT("Nahřívání...")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Zavádění...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Vytlačování...")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Pokračování...")
 #endif // LCD_HEIGHT < 4
 

Marlin/src/lcd/language/language_da.h

 #define MSG_DAC_PERCENT                     _UxGT("Driv %")
 #define MSG_DAC_EEPROM_WRITE                _UxGT("DAC EEPROM Skriv")
 
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("PRINT PAUSED")
-#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("RESUME OPTIONS:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Extruder mere")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Forsæt print")
 
 #if LCD_HEIGHT >= 4
   #define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("for at fortsætte...")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Vent på")
   #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("filament indtag")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Vent på")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("filament extrudering")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Vent på at print")
   #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("fortsætter")
 #else // LCD_HEIGHT < 4
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Udskyder...")
   #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Indsæt og klik")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Indtager...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Extrudere...")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Fortsætter...")
 #endif // LCD_HEIGHT < 4
 

Marlin/src/lcd/language/language_de.h

 #define MSG_DAC_PERCENT                     _UxGT("Treiber %")
 #define MSG_DAC_EEPROM_WRITE                _UxGT("Werte speichern")
 
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("DRUCK PAUSIERT")
+#define MSG_FILAMENT_CHANGE_HEADER_PAUSE    _UxGT("DRUCK PAUSIERT")
 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("FORTS. OPTIONEN:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Extrude mehr")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Drucke weiter")
-#define MSG_FILAMENT_CHANGE_MINTEMP         _UxGT("Min. Temperatur ist ")
 #define MSG_FILAMENT_CHANGE_NOZZLE          _UxGT("  Düse: ")
 
 #if LCD_HEIGHT >= 4
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Warte auf")
   #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("Laden des")
   #define MSG_FILAMENT_CHANGE_LOAD_3          _UxGT("Filaments")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Warte auf")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("Extrusion des")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_3       _UxGT("Filaments")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Warte auf")
   #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("Fortsetzung des")
   #define MSG_FILAMENT_CHANGE_RESUME_3        _UxGT("Druckes...")
   #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Laden und Klick")
   #define MSG_FILAMENT_CHANGE_HEATING_1       _UxGT("Heizen...")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Laden...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Extrudieren...")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Fortsetzen...")
 #endif // LCD_HEIGHT < 4
 

Marlin/src/lcd/language/language_el.h

 #define MSG_ERR_MAXTEMP_BED                 _UxGT("ΜΕΓΙΣΤΗ ΘΕΡΜΟΚΡΑΣΙΑΣ ΕΠ. ΕΚΤΥΠΩΣΗΣ") //SHORTEN
 #define MSG_ERR_MINTEMP_BED                 _UxGT("ΕΛΑΧΙΣΤΗ ΘΕΡΜΟΚΡΑΣΙΑΣ ΕΠ. ΕΚΤΥΠΩΣΗΣ") //SHORTEN
 #define MSG_HALTED                          _UxGT("H εκτύπωση διακόπηκε")
-#define MSG_PLEASE_RESET                    _UxGT("PLEASE RESET") //TRANSLATE
 #define MSG_HEATING                         _UxGT("Θερμαίνεται…")
 #define MSG_HEATING_COMPLETE                _UxGT("Η θέρμανση ολοκληρώθηκε.") //SHORTEN
 #define MSG_BED_HEATING                     _UxGT("Θέρμανση ΕΠ. Εκτύπωσης") //SHORTEN
 #define MSG_DELTA_CALIBRATE_Z               _UxGT("Βαθμονόμηση Z")
 #define MSG_DELTA_CALIBRATE_CENTER          _UxGT("Βαθμονόμηση κέντρου")
 
-#define MSG_INFO_MENU                       _UxGT("About Printer")
-#define MSG_INFO_PRINTER_MENU               _UxGT("Printer Info")
-#define MSG_INFO_STATS_MENU                 _UxGT("Printer Stats")
-#define MSG_INFO_BOARD_MENU                 _UxGT("Board Info")
-#define MSG_INFO_THERMISTOR_MENU            _UxGT("Thermistors")
-#define MSG_INFO_EXTRUDERS                  _UxGT("Extruders")
-#define MSG_INFO_BAUDRATE                   _UxGT("Baud")
-#define MSG_INFO_PROTOCOL                   _UxGT("Protocol")
-
-#if LCD_WIDTH >= 20
-  #define MSG_INFO_PRINT_COUNT              _UxGT("Print Count")
-  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Completed  ")
-  #define MSG_INFO_PRINT_TIME               _UxGT("Total Time ")
-#else
-  #define MSG_INFO_PRINT_COUNT              _UxGT("Prints   ")
-  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Completed")
-  #define MSG_INFO_PRINT_TIME               _UxGT("Duration ")
-#endif
-#define MSG_INFO_MIN_TEMP                   _UxGT("Min Temp")
-#define MSG_INFO_MAX_TEMP                   _UxGT("Max Temp")
-#define MSG_INFO_PSU                        _UxGT("PSU")
-
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("CHANGE FILAMENT")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Extrude more")
-#define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Resume print")
-
-#if LCD_HEIGHT >= 4
-  // Up to 3 lines allowed
-  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Wait for start")
-  #define MSG_FILAMENT_CHANGE_INIT_2          _UxGT("of the filament")
-  #define MSG_FILAMENT_CHANGE_INIT_3          _UxGT("change")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Wait for")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_2        _UxGT("filament unload")
-  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Insert filament")
-  #define MSG_FILAMENT_CHANGE_INSERT_2        _UxGT("and press button")
-  #define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("to continue...")
-  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Wait for")
-  #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("filament load")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Wait for")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("filament extrude")
-  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Wait for print")
-  #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("to resume")
-#else // LCD_HEIGHT < 4
-  // Up to 2 lines allowed
-  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Please wait...")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Ejecting...")
-  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Insert and Click")
-  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Loading...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Extruding...")
-  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Resuming...")
-#endif
-
 #endif // LANGUAGE_EL_H

Marlin/src/lcd/language/language_en.h

 #ifndef MSG_FILAMENT_DIAM
   #define MSG_FILAMENT_DIAM                   _UxGT("Fil. Dia.")
 #endif
+#ifndef MSG_FILAMENT_UNLOAD
+  #define MSG_FILAMENT_UNLOAD                 _UxGT("Unload mm")
+#endif
+#ifndef MSG_FILAMENT_LOAD
+  #define MSG_FILAMENT_LOAD                   _UxGT("Load mm")
+#endif
 #ifndef MSG_ADVANCE_K
   #define MSG_ADVANCE_K                       _UxGT("Advance K")
 #endif
 #ifndef MSG_FILAMENTCHANGE
   #define MSG_FILAMENTCHANGE                  _UxGT("Change filament")
 #endif
+#ifndef MSG_FILAMENTLOAD
+  #define MSG_FILAMENTLOAD                    _UxGT("Load filament")
+#endif
+#ifndef MSG_FILAMENTUNLOAD
+  #define MSG_FILAMENTUNLOAD                  _UxGT("Unload filament")
+#endif
+#ifndef MSG_FILAMENTUNLOAD_ALL
+  #define MSG_FILAMENTUNLOAD_ALL              _UxGT("Unload All")
+#endif
 #ifndef MSG_INIT_SDCARD
   #define MSG_INIT_SDCARD                     _UxGT("Init. SD card")
 #endif
   #define MSG_DAC_EEPROM_WRITE                _UxGT("DAC EEPROM Write")
 #endif
 #ifndef MSG_FILAMENT_CHANGE_HEADER
-  #define MSG_FILAMENT_CHANGE_HEADER          _UxGT("PRINT PAUSED")
+  #define MSG_FILAMENT_CHANGE_HEADER_PAUSE    _UxGT("PRINT PAUSED")
+#endif
+#ifndef MSG_FILAMENT_CHANGE_HEADER_LOAD
+  #define MSG_FILAMENT_CHANGE_HEADER_LOAD     _UxGT("LOAD FILAMENT")
+#endif
+#ifndef MSG_FILAMENT_CHANGE_HEADER_UNLOAD
+  #define MSG_FILAMENT_CHANGE_HEADER_UNLOAD   _UxGT("UNLOAD FILAMENT")
 #endif
 #ifndef MSG_FILAMENT_CHANGE_OPTION_HEADER
   #define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("RESUME OPTIONS:")
 #endif
-#ifndef MSG_FILAMENT_CHANGE_OPTION_EXTRUDE
+#ifndef MSG_FILAMENT_CHANGE_OPTION_PURGE
-  #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Extrude more")
+  #define MSG_FILAMENT_CHANGE_OPTION_PURGE    _UxGT("Purge more")
 #endif
 #ifndef MSG_FILAMENT_CHANGE_OPTION_RESUME
-  #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Resume print")
+  #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Continue")
-#endif
-#ifndef MSG_FILAMENT_CHANGE_MINTEMP
-  #define MSG_FILAMENT_CHANGE_MINTEMP         _UxGT("Minimum Temp is ")
 #endif
 #ifndef MSG_FILAMENT_CHANGE_NOZZLE
   #define MSG_FILAMENT_CHANGE_NOZZLE          _UxGT("  Nozzle: ")
     #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Wait for")
     #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("filament load")
   #endif
-  #ifndef MSG_FILAMENT_CHANGE_EXTRUDE_1
+  #ifndef MSG_FILAMENT_CHANGE_PURGE_1
-    #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Wait for")
+    #define MSG_FILAMENT_CHANGE_PURGE_1         _UxGT("Wait for")
-    #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("filament extrude")
+    #define MSG_FILAMENT_CHANGE_PURGE_2         _UxGT("filament purge")
   #endif
   #ifndef MSG_FILAMENT_CHANGE_RESUME_1
     #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Wait for print")
   #ifndef MSG_FILAMENT_CHANGE_LOAD_1
     #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Loading...")
   #endif
-  #ifndef MSG_FILAMENT_CHANGE_EXTRUDE_1
+  #ifndef MSG_FILAMENT_CHANGE_PURGE_1
-    #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Extruding...")
+    #define MSG_FILAMENT_CHANGE_PURGE_1         _UxGT("Purging...")
   #endif
   #ifndef MSG_FILAMENT_CHANGE_RESUME_1
     #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Resuming...")

Marlin/src/lcd/language/language_es.h

 #define MSG_DAC_PERCENT                     _UxGT("Driver %")
 #define MSG_DAC_EEPROM_WRITE                _UxGT("Escribe DAC EEPROM")
 
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("IMPR. PAUSADA")
+#define MSG_FILAMENT_CHANGE_HEADER_PAUSE    _UxGT("IMPR. PAUSADA")
 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("OPC. REINICIO:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Extruir mas")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Resumir imp.")
 
-#define MSG_FILAMENT_CHANGE_MINTEMP         _UxGT("Temp Minima es ")
 #define MSG_FILAMENT_CHANGE_NOZZLE          _UxGT("  Boquilla: ")
 
 #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Esperando iniciar")
 #define MSG_FILAMENT_CHANGE_UNLOAD_2        _UxGT("filamento expulsado")
 #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Esperado por")
 #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("Cargar filamento")
-#define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Esperado por")
-#define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("Extruir filamento")
 #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Esperando imp.")
 #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("para resumir")
 #define MSG_FILAMENT_CHANGE_HEAT_1          _UxGT("Oprima boton para")

Marlin/src/lcd/language/language_eu.h

 #define MSG_DAC_PERCENT                     _UxGT("Driver %")
 #define MSG_DAC_EEPROM_WRITE                _UxGT("Idatzi DAC EEPROM")
 
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("HARIZPIA ALDATU")
+#define MSG_FILAMENT_CHANGE_HEADER_PAUSE    _UxGT("HARIZPIA ALDATU")
 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("ALDAKETA AUKERAK:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Gehiago estruitu")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Inprima. jarraitu")
 
-#define MSG_FILAMENT_CHANGE_MINTEMP         _UxGT("Tenp Minimoa ")
 #define MSG_FILAMENT_CHANGE_NOZZLE          _UxGT("  Pita: ")
 
 #endif // LANGUAGE_EU_H

Marlin/src/lcd/language/language_fr.h

 #define MSG_DAC_PERCENT                     _UxGT("Driver %")
 #define MSG_DAC_EEPROM_WRITE                _UxGT("DAC EEPROM sauv.")
 
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("PRINT PAUSED")
-#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("RESUME OPTIONS:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("+ extrusion")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Reprendre impr.")
-#define MSG_FILAMENT_CHANGE_MINTEMP         _UxGT("La temp. minimum est ")
 #define MSG_FILAMENT_CHANGE_NOZZLE          _UxGT("  Buse: ")
 
 #if LCD_HEIGHT >= 4
   #define MSG_FILAMENT_CHANGE_HEATING_2     _UxGT("Patientez SVP...")
   #define MSG_FILAMENT_CHANGE_LOAD_1        _UxGT("attente de")
   #define MSG_FILAMENT_CHANGE_LOAD_2        _UxGT("chargement filament")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1     _UxGT("attente de")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2     _UxGT("extrusion filament")
   #define MSG_FILAMENT_CHANGE_RESUME_1      _UxGT("attente impression")
   #define MSG_FILAMENT_CHANGE_RESUME_2      _UxGT("pour reprendre")
 #else // LCD_HEIGHT < 4
   #define MSG_FILAMENT_CHANGE_UNLOAD_1      _UxGT("Ejection...")
   #define MSG_FILAMENT_CHANGE_INSERT_1      _UxGT("Inserer et clic")
   #define MSG_FILAMENT_CHANGE_LOAD_1        _UxGT("Chargement...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1     _UxGT("Extrusion...")
   #define MSG_FILAMENT_CHANGE_RESUME_1      _UxGT("Reprise...")
 #endif // LCD_HEIGHT < 4
 

Marlin/src/lcd/language/language_fr_utf8.h

 #define MSG_DAC_PERCENT                     _UxGT("Driver %")
 #define MSG_DAC_EEPROM_WRITE                _UxGT("DAC EEPROM sauv.")
 
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("PRINT PAUSED")
-#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("RESUME OPTIONS:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("+ extrusion")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Reprendre impr.")
-#define MSG_FILAMENT_CHANGE_MINTEMP         _UxGT("La temp. minimum est ")
 #define MSG_FILAMENT_CHANGE_NOZZLE          _UxGT("  Buse: ")
 
 #if LCD_HEIGHT >= 4
   #define MSG_FILAMENT_CHANGE_HEATING_2     _UxGT("Patientez SVP...")
   #define MSG_FILAMENT_CHANGE_LOAD_1        _UxGT("attente de")
   #define MSG_FILAMENT_CHANGE_LOAD_2        _UxGT("chargement filament")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1     _UxGT("attente de")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2     _UxGT("extrusion filament")
   #define MSG_FILAMENT_CHANGE_RESUME_1      _UxGT("attente impression")
   #define MSG_FILAMENT_CHANGE_RESUME_2      _UxGT("pour reprendre")
 #else // LCD_HEIGHT < 4
   #define MSG_FILAMENT_CHANGE_UNLOAD_1      _UxGT("Ejection...")
   #define MSG_FILAMENT_CHANGE_INSERT_1      _UxGT("Insérer et clic")
   #define MSG_FILAMENT_CHANGE_LOAD_1        _UxGT("Chargement...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1     _UxGT("Extrusion...")
   #define MSG_FILAMENT_CHANGE_RESUME_1      _UxGT("Reprise...")
 #endif // LCD_HEIGHT < 4
 

Marlin/src/lcd/language/language_gl.h

 #define MSG_DAC_PERCENT                     _UxGT("Motor %")
 #define MSG_DAC_EEPROM_WRITE                _UxGT("Garda DAC EEPROM")
 
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("PRINT PAUSED")
-#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("RESUME OPTIONS:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Extruir mais")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Segue traballo")
 
 #if LCD_HEIGHT >= 4
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Agarde pola")
   #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("carga do")
   #define MSG_FILAMENT_CHANGE_LOAD_3          _UxGT("filamento")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Agarde pola")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("extrusion do")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_3       _UxGT("filamento")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Agarde para")
   #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("seguir co")
   #define MSG_FILAMENT_CHANGE_RESUME_3        _UxGT("traballo")
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Descargando...")
   #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Introduza e click")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Cargando...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Extruindo...")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Seguindo...")
 #endif // LCD_HEIGHT < 4
 

Marlin/src/lcd/language/language_hr.h

 #define MSG_DAC_PERCENT                     _UxGT("Driver %")
 #define MSG_DAC_EEPROM_WRITE                _UxGT("DAC EEPROM Write")
 
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("PRINT PAUSED")
-#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("RESUME OPTIONS:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Extrudiraj više")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Nastavi print")
 
 #if LCD_HEIGHT >= 4
   #define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("za nastavak...")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Pričekaj")
   #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("filament load")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Pričekaj")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("filament extrude")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Wait for print")
   #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("to resume")
 #else // LCD_HEIGHT < 4
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Ejecting...")
   #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Insert and Click")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Loading...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Extrudiranje...")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Nastavljam...")
 #endif // LCD_HEIGHT < 4
 

Marlin/src/lcd/language/language_it.h

 #define MSG_DAC_PERCENT                     _UxGT("Driver %")
 #define MSG_DAC_EEPROM_WRITE                _UxGT("Scrivi DAC EEPROM")
 
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("STAMPA IN PAUSA")
+#define MSG_FILAMENT_CHANGE_HEADER_PAUSE    _UxGT("STAMPA IN PAUSA")
 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("OPZIONI:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Estrudi ancora")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Riprendi stampa")
-#define MSG_FILAMENT_CHANGE_MINTEMP         _UxGT("Temp minima è ")
 #define MSG_FILAMENT_CHANGE_NOZZLE          _UxGT("  Ugello: ")
 
 #if LCD_HEIGHT >= 4
   #define MSG_FILAMENT_CHANGE_LOAD_1        _UxGT("Attendere")
   #define MSG_FILAMENT_CHANGE_LOAD_2        _UxGT("il caricamento")
   #define MSG_FILAMENT_CHANGE_LOAD_3        _UxGT("del filamento")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1     _UxGT("Attendere")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2     _UxGT("l'estrusione")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_3     _UxGT("del filamento")
   #define MSG_FILAMENT_CHANGE_RESUME_1      _UxGT("Attendere")
   #define MSG_FILAMENT_CHANGE_RESUME_2      _UxGT("la ripresa")
   #define MSG_FILAMENT_CHANGE_RESUME_3      _UxGT("della stampa")
   #define MSG_FILAMENT_CHANGE_INSERT_1      _UxGT("Inserisci e premi")
   #define MSG_FILAMENT_CHANGE_HEATING_1     _UxGT("Riscaldamento...")
   #define MSG_FILAMENT_CHANGE_LOAD_1        _UxGT("Caricamento...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1     _UxGT("Estrusione...")
   #define MSG_FILAMENT_CHANGE_RESUME_1      _UxGT("Ripresa...")
 #endif // LCD_HEIGHT < 4
 

Marlin/src/lcd/language/language_kana.h

 #else
   #define MSG_DAC_PERCENT                   "DAC\xbc\xad\xc2\xd8\xae\xb8"                                      // "DACｼｭﾂﾘｮｸ" ("Driver %")
 #endif
-#define MSG_DAC_EEPROM_WRITE                MSG_STORE_EPROM                                                    // "ﾒﾓﾘﾍｶｸﾉｳ" ("DAC EEPROM Write")
+#define MSG_DAC_EEPROM_WRITE                MSG_STORE_EEPROM                                                   // "ﾒﾓﾘﾍｶｸﾉｳ" ("DAC EEPROM Write")
-#define MSG_FILAMENT_CHANGE_HEADER          "PRINT PAUSED"
-#define MSG_FILAMENT_CHANGE_OPTION_HEADER   "RESUME OPTIONS:"
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  "\xbb\xd7\xc6\xb5\xbc\xc0\xde\xbd"                                 // "ｻﾗﾆｵｼﾀﾞｽ" ("Extrude more")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   "\xcc\xdf\xd8\xdd\xc4\xbb\xb2\xb6\xb2"                             // "ﾌﾟﾘﾝﾄｻｲｶｲ" ("Resume print")
 
 #if LCD_HEIGHT >= 4
   #define MSG_FILAMENT_CHANGE_INSERT_2      "\xb8\xd8\xaf\xb8\xbd\xd9\xc4\xbf\xde\xaf\xba\xb3\xbc\xcf\xbd"     // "ｸﾘｯｸｽﾙﾄｿﾞｯｺｳｼﾏｽ" ("and press button")
   #define MSG_FILAMENT_CHANGE_LOAD_1        "\xcc\xa8\xd7\xd2\xdd\xc4\xbf\xb3\xc3\xdd\xc1\xad\xb3"             // "ﾌｨﾗﾒﾝﾄｿｳﾃﾝﾁｭｳ" ("Wait for")
   #define MSG_FILAMENT_CHANGE_LOAD_2        "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2"             // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("filament load")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1     "\xcc\xa8\xd7\xd2\xdd\xc4\xb5\xbc\xc0\xde\xbc\xc1\xad\xb3"         // "ﾌｨﾗﾒﾝﾄｵｼﾀﾞｼﾁｭｳ" ("Wait for")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2     "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2"             // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("filament extrude")
   #define MSG_FILAMENT_CHANGE_RESUME_1      "\xcc\xdf\xd8\xdd\xc4\xa6\xbb\xb2\xb6\xb2\xbc\xcf\xbd"             // "ﾌﾟﾘﾝﾄｦｻｲｶｲｼﾏｽ" ("Wait for print")
   #define MSG_FILAMENT_CHANGE_RESUME_2      "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2"             // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("to resume")
 #else // LCD_HEIGHT < 4
     #define MSG_FILAMENT_CHANGE_INSERT_1    "\xbf\xb3\xc6\xad\xb3\xbc\x2c\xb8\xd8\xaf\xb8\xbe\xd6"                     // "ｿｳﾆｭｳｼ,ｸﾘｯｸｾﾖ" ("Insert and Click")
   #endif
   #define MSG_FILAMENT_CHANGE_LOAD_1        "\xcc\xa8\xd7\xd2\xdd\xc4\xbf\xb3\xc3\xdd\xc1\xad\xb3"             // "ﾌｨﾗﾒﾝﾄｿｳﾃﾝﾁｭｳ" ("Loading...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1     "\xcc\xa8\xd7\xd2\xdd\xc4\xb5\xbc\xc0\xde\xbc\xc1\xad\xb3"         // "ﾌｨﾗﾒﾝﾄｵｼﾀﾞｼﾁｭｳ" ("Extruding...")
   #define MSG_FILAMENT_CHANGE_RESUME_1      "\xcc\xdf\xd8\xdd\xc4\xa6\xbb\xb2\xb6\xb2\xbc\xcf\xbd"             // "ﾌﾟﾘﾝﾄｦｻｲｶｲｼﾏｽ" ("Resuming...")
 #endif // LCD_HEIGHT < 4
 

Marlin/src/lcd/language/language_kana_utf8.h

 #define MSG_INFO_PSU                        _UxGT("デンゲンシュベツ")                // "Power Supply"
 #define MSG_DRIVE_STRENGTH                  _UxGT("モータークドウリョク")              // "Drive Strength"
 #define MSG_DAC_PERCENT                     _UxGT("DACシュツリョク %")               // "Driver %"
-#define MSG_DAC_EEPROM_WRITE                MSG_STORE_EPROM                     // "DAC EEPROM Write"
+#define MSG_DAC_EEPROM_WRITE                MSG_STORE_EEPROM                    // "DAC EEPROM Write"
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("PRINT PAUSED")
-#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("RESUME OPTIONS:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("サラニオシダス")                 // "Extrude more"
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("プリントサイカイ")                // "Resume print"
 #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("コウカンヲカイシシマス")            // "Wait for start"
 #define MSG_FILAMENT_CHANGE_INIT_2          _UxGT("シバラクオマチクダサイ")            // "of the filament"
 #define MSG_FILAMENT_CHANGE_INSERT_2        _UxGT("クリックスルトゾッコウシマス")         // "and press button"
 #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("フィラメントソウテンチュウ")          // "Wait for"
 #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("シバラクオマチクダサイ")            // "filament load"
-#define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("フィラメントオシダシチュウ")          // "Wait for"
-#define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("シバラクオマチクダサイ")            // "filament extrude"
 #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("プリントヲサイカイシマス")           // "Wait for print"
 #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("シバラクオマチクダサイ")            // "to resume"
 

Marlin/src/lcd/language/language_nl.h

 #define MSG_DRIVE_STRENGTH                  _UxGT("Motorstroom")
 #define MSG_DAC_PERCENT                     _UxGT("Driver %")  //accepted English term in Dutch
 #define MSG_DAC_EEPROM_WRITE                _UxGT("DAC Opslaan")
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("PRINT PAUSED")
-#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("RESUME OPTIONS:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Extrudeer meer")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Hervat print")
-#define MSG_FILAMENT_CHANGE_MINTEMP         _UxGT("Minimum Temp is ")
 #define MSG_FILAMENT_CHANGE_NOZZLE          _UxGT(" Nozzle: ") //accepeted English term
 //
 // Filament Change screens show up to 3 lines on a 4-line display
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Wacht voor")
   #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("filament te")
   #define MSG_FILAMENT_CHANGE_LOAD_3          _UxGT("laden")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Wacht voor")
+        #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Wacht voor print")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("filament te")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_3       _UxGT("extruderen")
-  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Wacht voor print")
   #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("om verder")
   #define MSG_FILAMENT_CHANGE_RESUME_3        _UxGT("te gaan")
 #else // LCD_HEIGHT < 4
   #define MSG_FILAMENT_CHANGE_INSERT_2        _UxGT("en druk knop")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Wacht voor")
   #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("inladen...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Wacht voor")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("extrudering")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Wacht voor")
   #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("printing...")
 #endif // LCD_HEIGHT < 4

Marlin/src/lcd/language/language_pl-DOGM.h

 #define MSG_DAC_PERCENT                     _UxGT("Siła %")
 #define MSG_DAC_EEPROM_WRITE                _UxGT("Zapisz DAC EEPROM")
 
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("ZMIEŃ FILAMENT")
+#define MSG_FILAMENT_CHANGE_HEADER_PAUSE    _UxGT("ZMIEŃ FILAMENT")
 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("ZMIEŃ OPCJE:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Ekstruduj więcej")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Wznów drukowanie")
 
 #if LCD_HEIGHT >= 4
   #define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("aby kontynuować...")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Czekam na")
   #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("włożenie filamentu")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Czekam na")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("ekstruzję filamentu")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Czekam na")
   #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("wznowienie druku")
 #else // LCD_HEIGHT < 4
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Wysuwanie...")
   #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Włóż i naciśnij prz.")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Ładowanie...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Ekstruzja...")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Wznowienie...")
 #endif // LCD_HEIGHT < 4
 

Marlin/src/lcd/language/language_pl-HD44780.h

 #define MSG_DAC_PERCENT                     _UxGT("Sila %")
 #define MSG_DAC_EEPROM_WRITE                _UxGT("Zapisz DAC EEPROM")
 
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("ZMIEN FILAMENT")
+#define MSG_FILAMENT_CHANGE_HEADER_PAUSE    _UxGT("ZMIEN FILAMENT")
 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("ZMIEN OPCJE:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Ekstruduj wiecej")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Wznow drukowanie")
 
 #if LCD_HEIGHT >= 4
   #define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("aby kontynuowac...")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Czekam na")
   #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("wlozenie filamentu")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Czekam na")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("ekstruzje filamentu")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Czekam na")
   #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("wznowienie druku")
 #else // LCD_HEIGHT < 4
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Wysuwanie...")
   #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Wloz i nacisnij prz.")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Ladowanie...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Ekstruzja...")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Wznowienie...")
 #endif // LCD_HEIGHT < 4
 
   #define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("aby kontynuowac...")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Czekam na")
   #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("wlozenie filamentu")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Czekam na")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("ekstruzje filamentu")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Czekam na")
   #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("wznowienie druku")
 #else // LCD_HEIGHT < 4
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Wysuwanie...")
   #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Wloz i nacisnij prz.")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Ladowanie...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Ekstruzja...")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Wznowienie...")
 #endif // LCD_HEIGHT < 4
 

Marlin/src/lcd/language/language_ru.h

 #define MSG_DRIVE_STRENGTH                  _UxGT("Сила привода")
 #define MSG_DAC_PERCENT                     _UxGT("Привод %")
 #define MSG_DAC_EEPROM_WRITE                _UxGT("Записи DAC EEPROM")
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("ПЕЧАТЬ ОСТАНОВЛЕНА")
+#define MSG_FILAMENT_CHANGE_HEADER_PAUSE    _UxGT("ПЕЧАТЬ ОСТАНОВЛЕНА")
 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("ОПЦИИ ВОЗОБНОВЛЕНИЯ:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Выдавить ещё")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Возобновить печать")
-#define MSG_FILAMENT_CHANGE_MINTEMP         _UxGT("Мин. температура")
 #define MSG_FILAMENT_CHANGE_NOZZLE          _UxGT("  Сопла: ")
 //
 // Filament Change screens show up to 3 lines on a 4-line display
   #define MSG_FILAMENT_CHANGE_INSERT_1    _UxGT("Вставь и нажми")
   #define MSG_FILAMENT_CHANGE_HEATING_1   _UxGT("Нагрев...")
   #define MSG_FILAMENT_CHANGE_LOAD_1      _UxGT("Загрузка...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1   _UxGT("Выдавливание...")
   #define MSG_FILAMENT_CHANGE_RESUME_1    _UxGT("Возобновление...")
 #endif // LCD_HEIGHT < 4
 

Marlin/src/lcd/language/language_sk_utf8.h

 #define MSG_DAC_PERCENT                     _UxGT("Motor %")
 #define MSG_DAC_EEPROM_WRITE                _UxGT("Uložiť do EEPROM")
 
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("PAUZA TLAČE")
+#define MSG_FILAMENT_CHANGE_HEADER_PAUSE    _UxGT("PAUZA TLAČE")
 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("MOŽN. POKRAČ.:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Ešte vytlačiť")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Obnoviť tlač")
-#define MSG_FILAMENT_CHANGE_MINTEMP         _UxGT("Min. teplota je ")
 #define MSG_FILAMENT_CHANGE_NOZZLE          _UxGT("  Tryska: ")
 
 #if LCD_HEIGHT >= 4
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Čakajte prosím")
   #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("na zavedenie")
   #define MSG_FILAMENT_CHANGE_LOAD_3          _UxGT("filamentu")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Čakajte prosím")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("na vytlačenie")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_3       _UxGT("filamentu")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Čakajte prosím")
   #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("na pokračovanie")
   #define MSG_FILAMENT_CHANGE_RESUME_3        _UxGT("tlače")
   #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Vložte, kliknite")
   #define MSG_FILAMENT_CHANGE_HEATING_1       _UxGT("Ohrev...")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Zavádzanie...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Vytlačovanie...")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Pokračovanie...")
 #endif // LCD_HEIGHT < 4
 

Marlin/src/lcd/language/language_tr.h

 
 #define MSG_DRIVE_STRENGTH                  _UxGT("Sürücü Gücü")                                        // Sürücü Gücü
 #define MSG_DAC_PERCENT                     _UxGT("Sürücü %")                                           // Sürücü %
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("PRINT PAUSED")
-#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("RESUME OPTIONS:")
 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("Seçenekler:")                                        // Seçenekler:
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Daha Akıt")                                          // Daha Akıt
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Baskıyı sürdür")                                     // Baskıyı sürdür
-#define MSG_FILAMENT_CHANGE_MINTEMP         _UxGT("Min. Sıcaklık")                                      // Min. Sıcaklık:
 #define MSG_FILAMENT_CHANGE_NOZZLE          _UxGT("  Nozül: ")                                          //   Nozül:
 
 #if LCD_HEIGHT >= 4
   #define MSG_FILAMENT_CHANGE_HEATING_2       _UxGT("Lütfen Bekleyin...")                               // Lütfen Bekleyin...
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Bekleniyor")                                       // Bekleniyor
   #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("filamanın yüklenmesi")                             // filamanın yüklenmesi
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Bekleniyor")                                       // Bekleniyor
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("filaman akması")                                   // filaman akması
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Baskının sürdürülmesini")                          // Baskının sürdürülmesini
   #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("bekle")                                            // bekle
 #else // LCD_HEIGHT < 4
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Çıkartılıyor...")                                  // Çıkartılıyor...
   #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Yükle ve bas")                                     // Yükle ve bas
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Yüklüyor...")                                      // Yüklüyor...
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Akıtılıyor...")                                    // Akıtılıyor...
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Sürdürülüyor...")                                  // Sürdürülüyor...
 #endif // LCD_HEIGHT < 4
 

Marlin/src/lcd/language/language_uk.h

 #define MSG_DAC_PERCENT                     _UxGT("% мотору")
 #define MSG_DAC_EEPROM_WRITE                _UxGT("Запис ЦАП на ПЗП")
 
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("PRINT PAUSED")
-#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("RESUME OPTIONS:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Екструдувати")
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Відновити друк")
 
 #if LCD_HEIGHT >= 4
   #define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("продовження...")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Зачекайте на")
   #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("ввід волокна")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Зачекайте на")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("екструзію")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_3       _UxGT("волокна")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Зачекайте на")
   #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("відновлення")
   #define MSG_FILAMENT_CHANGE_RESUME_3        _UxGT("друку")
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Вивід...")
   #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Вставте і нат.")
   #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Ввід...")
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Екструзія...")
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Відновлення...")
 #endif // LCD_HEIGHT < 4
 

Marlin/src/lcd/language/language_zh_CN.h

 #define MSG_INFO_MAX_TEMP                   _UxGT("最高温度")  //"Max Temp"
 #define MSG_INFO_PSU                        _UxGT("电源供应")  //"Power Supply"
 
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("PRINT PAUSED")
-#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("RESUME OPTIONS:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("挤出更多")  //"Extrude more"
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("恢复打印")  //"Resume print"
 
 #if LCD_HEIGHT >= 4
 #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("等待")  //"Wait for"
 #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("进料")  //"filament load"
 #define MSG_FILAMENT_CHANGE_LOAD_3          _UxGT("")  //""
-#define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("等待")  //"Wait for"
-#define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("丝料挤出")  //"filament extrude"
-#define MSG_FILAMENT_CHANGE_EXTRUDE_3       _UxGT("")  //""
 #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("等待打印")  //"Wait for print"
 #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("恢复")  //"to resume"
 #define MSG_FILAMENT_CHANGE_RESUME_3        _UxGT("")  //""
 #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("退出中 ...")  //"Ejecting..."
 #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("插入并单击")  //"Insert and Click"
 #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("装载中 ...")  //"Loading..."
-#define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("挤出中 ...")  //"Extruding..."
 #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("恢复中 ...")  //"Resuming..."
 #endif // LCD_HEIGHT < 4
 

Marlin/src/lcd/language/language_zh_TW.h

 #define MSG_INFO_MAX_TEMP                   _UxGT("最高溫度")  //"Max Temp"
 #define MSG_INFO_PSU                        _UxGT("電源供應")  //"Power Supply"
 
-#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("PRINT PAUSED")
-#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("RESUME OPTIONS:")
-#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("擠出更多")  //"Extrude more"
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("恢復列印")  //"Resume print"
 
 #if LCD_HEIGHT >= 4
 #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("等待")  //"Wait for"
 #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("進料")  //"filament load"
 #define MSG_FILAMENT_CHANGE_LOAD_3          _UxGT("")  //""
-#define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("等待")  //"Wait for"
-#define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("絲料擠出")  //"filament extrude"
-#define MSG_FILAMENT_CHANGE_EXTRUDE_3       _UxGT("")  //""
 #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("等待列印")  //"Wait for print"
 #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("恢復")  //"to resume"
 #define MSG_FILAMENT_CHANGE_RESUME_3        _UxGT("")  //""
 #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("退出中 ...")  //"Ejecting..."
 #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("插入並點擊")  //"Insert and Click"
 #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("載入中 ...")  //"Loading..."
-#define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("擠出中 ...")  //"Extruding..."
 #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("恢復中 ...")  //"Resuming..."
 #endif // LCD_HEIGHT < 4