Merge pull request #2131 from thinkyhead/bq_is_ramps_13_efb

Witbox and Hephestos are RAMPS EFB

Marlin/boards.h

 #define BOARD_5DPRINT           88   // 5DPrint D8 Driver Board
 #define BOARD_LEAPFROG          999  // Leapfrog
 #define BOARD_MKS_BASE          40   // MKS BASE 1.0
-#define BOARD_WITBOX            41   // bq WITBOX
-#define BOARD_HEPHESTOS         42   // bq Prusa i3 Hephestos
 #define BOARD_BAM_DICE          401  // 2PrintBeta BAM&DICE with STK drivers
 #define BOARD_BAM_DICE_DUE      402  // 2PrintBeta BAM&DICE Due with STK drivers
 

Marlin/configurator/config/Configuration.h

   const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
-#endif
+#endif 
 
 //===========================================================================
 //=========================== Manual Bed Leveling ===========================
 // #define MESH_BED_LEVELING    // Enable mesh bed leveling
 
 #ifdef MANUAL_BED_LEVELING
-  #define MBL_Z_STEP 0.025
+  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
 
 #ifdef EEPROM_SETTINGS
   // To disable EEPROM Serial responses and decrease program space by ~1700 byte: comment this out:
-  #define EEPROM_CHITCHAT // please keep turned on if you can.
+  #define EEPROM_CHITCHAT // Please keep turned on if you can.
 #endif
 
 // @section temperature
 //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
 //#define LCD_FEEDBACK_FREQUENCY_HZ 1000         // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
                                                  // 0 to disable buzzer feedback. Test with M300 S<frequency Hz> P<duration ms>
-
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
 //#define PANEL_ONE
 // Uncomment below to enable
 //#define FILAMENT_SENSOR
 
-#define FILAMENT_SENSOR_EXTRUDER_NUM	0  //The number of the extruder that has the filament sensor (0,1,2)
-#define MEASUREMENT_DELAY_CM			14  //measurement delay in cm.  This is the distance from filament sensor to middle of barrel
+#define FILAMENT_SENSOR_EXTRUDER_NUM 0   //The number of the extruder that has the filament sensor (0,1,2)
+#define MEASUREMENT_DELAY_CM        14   //measurement delay in cm.  This is the distance from filament sensor to middle of barrel
 
-#define DEFAULT_NOMINAL_FILAMENT_DIA  3.0  //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software.  Used for sensor reading validation
-#define MEASURED_UPPER_LIMIT          3.30  //upper limit factor used for sensor reading validation in mm
-#define MEASURED_LOWER_LIMIT          1.90  //lower limit factor for sensor reading validation in mm
-#define MAX_MEASUREMENT_DELAY			20  //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM  and lower number saves RAM)
+#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software.  Used for sensor reading validation
+#define MEASURED_UPPER_LIMIT         3.3 //upper limit factor used for sensor reading validation in mm
+#define MEASURED_LOWER_LIMIT         1.9 //lower limit factor for sensor reading validation in mm
+#define MAX_MEASUREMENT_DELAY       20   //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM  and lower number saves RAM)
 
 //defines used in the code
 #define DEFAULT_MEASURED_FILAMENT_DIA  DEFAULT_NOMINAL_FILAMENT_DIA  //set measured to nominal initially

Marlin/configurator/config/Configuration_adv.h

   #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
 #endif
 
+#ifdef PIDTEMP
+  // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
+  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
+  #define PID_ADD_EXTRUSION_RATE
+  #ifdef PID_ADD_EXTRUSION_RATE
+    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+  #endif
+#endif
+
 /**
  * Automatic Temperature:
  * The hotend target temperature is calculated by all the buffered lines of gcode.
  * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp.
  * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode
  */
-#ifdef PIDTEMP
-  // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
-  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
-  #define PID_ADD_EXTRUSION_RATE
-  #ifdef PID_ADD_EXTRUSION_RATE
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
-  #endif
-#endif
-
-
-//automatic temperature: The hot end target temperature is calculated by all the buffered lines of gcode.
-//The maximum buffered steps/sec of the extruder motor are called "se".
-//You enter the autotemp mode by a M109 S<mintemp> B<maxtemp> F<factor>
-// the target temperature is set to mintemp+factor*se[steps/sec] and limited by mintemp and maxtemp
-// you exit the value by any M109 without F*
-// Also, if the temperature is set to a value <mintemp, it is not changed by autotemp.
-// on an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode
 #define AUTOTEMP
 #ifdef AUTOTEMP
   #define AUTOTEMP_OLDWEIGHT 0.98

Marlin/configurator/config/boards.h

 #define BOARD_RAMPS_13_EEB      34   // RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed)
 #define BOARD_RAMPS_13_EFF      35   // RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Fan)
 #define BOARD_RAMPS_13_EEF      36   // RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Fan)
+#define BOARD_RAMPS_13_SF       38   // RAMPS 1.3 / 1.4 (Power outputs: Spindle, Controller Fan)
 #define BOARD_FELIX2            37   // Felix 2.0+ Electronics Board (RAMPS like)
 #define BOARD_GEN6              5    // Gen6
 #define BOARD_GEN6_DELUXE       51   // Gen6 deluxe
 #define BOARD_ELEFU_3           21   // Elefu Ra Board (v3)
 #define BOARD_5DPRINT           88   // 5DPrint D8 Driver Board
 #define BOARD_LEAPFROG          999  // Leapfrog
-#define BOARD_WITBOX            41   // bq WITBOX
-#define BOARD_HEPHESTOS         42   // bq Prusa i3 Hephestos
+#define BOARD_MKS_BASE          40   // MKS BASE 1.0
 #define BOARD_BAM_DICE          401  // 2PrintBeta BAM&DICE with STK drivers
 #define BOARD_BAM_DICE_DUE      402  // 2PrintBeta BAM&DICE Due with STK drivers
 

Marlin/configurator/config/language.h

 // kana_utf Japanese
 // cn       Chinese
 
+// fallback if no language is set, don't change
 #ifndef LANGUAGE_INCLUDE
-  // pick your language from the list above
   #define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
 #endif
 
   #define FIRMWARE_URL "http://3dprint.elettronicain.it/"
 #elif MB(K8200)
   #define MACHINE_NAME "K8200"
+  #define FIRMWARE_URL "https://github.com/CONSULitAS/Marlin-K8200"
 #elif MB(5DPRINT)
   #define MACHINE_NAME "Makibox"
 #elif MB(SAV_MKI)
   #define MACHINE_NAME "SAV MkI"
   #define FIRMWARE_URL "https://github.com/fmalpartida/Marlin/tree/SAV-MkI-config"
-#elif MB(WITBOX)
-  #define MACHINE_NAME "WITBOX"
-  #define FIRMWARE_URL "http://www.bq.com/gb/downloads-witbox.html"
-#elif MB(HEPHESTOS)
-  #define MACHINE_NAME "HEPHESTOS"
-  #define FIRMWARE_URL "http://www.bq.com/gb/downloads-prusa-i3-hephestos.html"
-#elif MB(BRAINWAVE_PRO)
-  #define MACHINE_NAME "Kossel Pro"
-  #ifndef FIRMWARE_URL
-    #define FIRMWARE_URL "https://github.com/OpenBeamUSA/Marlin/"
-  #endif
-#else
-  #ifndef MACHINE_NAME
-    #define MACHINE_NAME "3D Printer"
-  #endif
+#elif !defined(MACHINE_NAME)
+  #define MACHINE_NAME "3D Printer"
 #endif
 
 #ifdef CUSTOM_MENDEL_NAME
 #define MSG_FREE_MEMORY                     " Free Memory: "
 #define MSG_PLANNER_BUFFER_BYTES            "  PlannerBufferBytes: "
 #define MSG_OK                              "ok"
+#define MSG_WAIT                            "wait"
 #define MSG_FILE_SAVED                      "Done saving file."
 #define MSG_ERR_LINE_NO                     "Line Number is not Last Line Number+1, Last Line: "
 #define MSG_ERR_CHECKSUM_MISMATCH           "checksum mismatch, Last Line: "
 #define MSG_PID_DEBUG_PTERM                 " pTerm "
 #define MSG_PID_DEBUG_ITERM                 " iTerm "
 #define MSG_PID_DEBUG_DTERM                 " dTerm "
-#define MSG_HEATING_FAILED                  "Heating failed"
-#define MSG_EXTRUDER_SWITCHED_OFF           "Extruder switched off. Temperature difference between temp sensors is too high !"
-
 #define MSG_INVALID_EXTRUDER_NUM            " - Invalid extruder number !"
-#define MSG_THERMAL_RUNAWAY_STOP            "Thermal Runaway, system stopped! Heater_ID: "
-#define MSG_SWITCHED_OFF_MAX                " switched off. MAXTEMP triggered !!"
-#define MSG_MINTEMP_EXTRUDER_OFF            ": Extruder switched off. MINTEMP triggered !"
-#define MSG_MAXTEMP_EXTRUDER_OFF            ": Extruder" MSG_SWITCHED_OFF_MAX
-#define MSG_MAXTEMP_BED_OFF                 "Heated bed" MSG_SWITCHED_OFF_MAX
+
+#define MSG_HEATER_BED                      "bed"
+#define MSG_STOPPED_HEATER                  ", system stopped! Heater_ID: "
+#define MSG_REDUNDANCY                      "Heater switched off. Temperature difference between temp sensors is too high !"
+#define MSG_T_HEATING_FAILED                "Heating failed"
+#define MSG_T_THERMAL_RUNAWAY               "Thermal Runaway"
+#define MSG_T_MAXTEMP                       "MAXTEMP triggered"
+#define MSG_T_MINTEMP                       "MINTEMP triggered"
+
 
 // LCD Menu Messages
 

Marlin/example_configurations/Hephestos/Configuration.h

 
 // The following define selects which electronics board you have.
 // Please choose the name from boards.h that matches your setup
-#define MOTHERBOARD BOARD_HEPHESTOS
+#define MOTHERBOARD BOARD_RAMPS_13_EFB
 
 // Optional custom name for your RepStrap or other custom machine
 // Displayed in the LCD "Ready" message
-// #define CUSTOM_MACHINE_NAME "3D Printer"
+#define CUSTOM_MACHINE_NAME "HEPHESTOS"
+
+// Added for BQ
+#define FIRMWARE_URL "http://www.bq.com/gb/downloads-prusa-i3-hephestos.html"
  
 // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
 // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)

Marlin/example_configurations/WITBOX/Configuration.h

 
 // The following define selects which electronics board you have.
 // Please choose the name from boards.h that matches your setup
-#define MOTHERBOARD BOARD_WITBOX
+#define MOTHERBOARD BOARD_RAMPS_13_EFB
 
 // Optional custom name for your RepStrap or other custom machine
 // Displayed in the LCD "Ready" message
-// #define CUSTOM_MACHINE_NAME "3D Printer"
+#define CUSTOM_MACHINE_NAME "WITBOX"
+
+// Added for BQ
+#define FIRMWARE_URL "http://www.bq.com/gb/downloads-witbox.html"
 
 // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
 // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)

Marlin/language.h

 #elif MB(SAV_MKI)
   #define MACHINE_NAME "SAV MkI"
   #define FIRMWARE_URL "https://github.com/fmalpartida/Marlin/tree/SAV-MkI-config"
-#elif MB(WITBOX)
-  #define MACHINE_NAME "WITBOX"
-  #define FIRMWARE_URL "http://www.bq.com/gb/downloads-witbox.html"
-#elif MB(HEPHESTOS)
-  #define MACHINE_NAME "HEPHESTOS"
-  #define FIRMWARE_URL "http://www.bq.com/gb/downloads-prusa-i3-hephestos.html"
-#elif MB(BRAINWAVE_PRO)
-  #define MACHINE_NAME "Kossel Pro"
-  #ifndef FIRMWARE_URL
-    #define FIRMWARE_URL "https://github.com/OpenBeamUSA/Marlin/"
-  #endif
-#else
-  #ifndef MACHINE_NAME
-    #define MACHINE_NAME "3D Printer"
-  #endif
+#elif !defined(MACHINE_NAME)
+  #define MACHINE_NAME "3D Printer"
 #endif
 
 #ifdef CUSTOM_MENDEL_NAME

Marlin/pins.h

   #include "pins_5DPRINT.h"
 #elif MB(LEAPFROG)
   #include "pins_LEAPFROG.h"
-#elif MB(WITBOX)
-  #include "pins_WITBOX.h"
-#elif MB(HEPHESTOS)
-  #include "pins_HEPHESTOS.h"
 #elif MB(BAM_DICE)
   #include "pins_RAMPS_13.h"
 #elif MB(BAM_DICE_DUE)

Marlin/pins_HEPHESTOS.h

-/**
- * bq Prusa i3 Hephestos – Arduino Mega with RAMPS v1.3/1.4 pin assignments
- */
-
-#include "pins_RAMPS_13.h"
-
-#undef FAN_PIN
-#define FAN_PIN             9 // (Sprinter config)
-
-#undef HEATER_1_PIN
-#define HEATER_1_PIN       -1

Marlin/pins_WITBOX.h

-/**
- * bq WITBOX Arduino Mega with RAMPS v1.3/1.4 pin assignments
- */
-
-#include "pins_RAMPS_13.h"
-
-#undef FAN_PIN
-#define FAN_PIN             9 // (Sprinter config)
-
-#undef HEATER_1_PIN
-#define HEATER_1_PIN       -1