Pt100 and Pt1000 temperature sensors handling

Marlin/Configuration.h

 // 51 is 100k thermistor - EPCOS (1k pullup)
 // 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
 // 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
+//
+// 1047 is Pt1000 with 4k7 pullup
+// 1010 is Pt1000 with 1k pullup (non standard)
+// 147 is Pt100 with 4k7 pullup
+// 110 is Pt100 with 1k pullup (non standard)
 
 #define TEMP_SENSOR_0 -1
 #define TEMP_SENSOR_1 -1

Marlin/thermistortables.h

 };
 #endif
 
+// Pt1000 and Pt100 handling
+// 
+// Rt=R0*(1+a*T+b*T*T) [for T>0]
+// a=3.9083E-3, b=-5.775E-7
+
+#define PtA 3.9083E-3
+#define PtB -5.775E-7
+#define PtRt(T,R0) ((R0)*(1.0+(PtA)*(T)+(PtB)*(T)*(T)))
+#define PtAdVal(T,R0,Rup) (short)(1024/(Rup/PtRt(T,R0)+1))
+#define PtLine(T,R0,Rup) { PtAdVal(T,R0,Rup)*OVERSAMPLENR, T },
+
+#if (THERMISTORHEATER_0 == 110) || (THERMISTORHEATER_1 == 110) || (THERMISTORHEATER_2 == 110) || (THERMISTORBED == 110) // Pt100 with 1k0 pullup
+const short temptable_110[][2] PROGMEM = {
+// only few values are needed as the curve is very flat  
+  PtLine(0,100,1000)
+  PtLine(50,100,1000)
+  PtLine(100,100,1000)
+  PtLine(150,100,1000)
+  PtLine(200,100,1000)
+  PtLine(250,100,1000)
+  PtLine(300,100,1000)
+};
+#endif
+#if (THERMISTORHEATER_0 == 147) || (THERMISTORHEATER_1 == 147) || (THERMISTORHEATER_2 == 147) || (THERMISTORBED == 147) // Pt100 with 4k7 pullup
+const short temptable_147[][2] PROGMEM = {
+// only few values are needed as the curve is very flat  
+  PtLine(0,100,4700)
+  PtLine(50,100,4700)
+  PtLine(100,100,4700)
+  PtLine(150,100,4700)
+  PtLine(200,100,4700)
+  PtLine(250,100,4700)
+  PtLine(300,100,4700)
+};
+#endif
+#if (THERMISTORHEATER_0 == 1010) || (THERMISTORHEATER_1 == 1010) || (THERMISTORHEATER_2 == 1010) || (THERMISTORBED == 1010) // Pt1000 with 1k0 pullup
+const short temptable_1010[][2] PROGMEM = {
+  PtLine(0,1000,1000)
+  PtLine(25,1000,1000)
+  PtLine(50,1000,1000)
+  PtLine(75,1000,1000)
+  PtLine(100,1000,1000)
+  PtLine(125,1000,1000)
+  PtLine(150,1000,1000)
+  PtLine(175,1000,1000)
+  PtLine(200,1000,1000)
+  PtLine(225,1000,1000)
+  PtLine(250,1000,1000)
+  PtLine(275,1000,1000)
+  PtLine(300,1000,1000)
+};
+#endif
+#if (THERMISTORHEATER_0 == 1047) || (THERMISTORHEATER_1 == 1047) || (THERMISTORHEATER_2 == 1047) || (THERMISTORBED == 1047) // Pt1000 with 4k7 pullup
+const short temptable_1047[][2] PROGMEM = {
+// only few values are needed as the curve is very flat  
+  PtLine(0,1000,4700)
+  PtLine(50,1000,4700)
+  PtLine(100,1000,4700)
+  PtLine(150,1000,4700)
+  PtLine(200,1000,4700)
+  PtLine(250,1000,4700)
+  PtLine(300,1000,4700)
+};
+#endif
 
 #define _TT_NAME(_N) temptable_ ## _N
 #define TT_NAME(_N) _TT_NAME(_N)