Clean up whitespace

Marlin/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/default/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Anet/A2/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Cartesio/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Einstart-S/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Felix/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/MakerParts/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Malyan/M200/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/RigidBot/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/SCARA/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/TheBorg/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h

  */
 // normal size or plus?
 //#define ANYCUBIC_KOSSEL_PLUS
+
 // Anycubic Probe version 1 or 2 see README.md; 0 for no probe
 #define ANYCUBIC_PROBE_VERSION 0
+
 // Heated Bed:
 // 0 ... no heated bed
 // 1 ... aluminium heated bed with "BuildTak-like" sticker
 #define Y_PROBE_OFFSET_FROM_EXTRUDER 0     // Y offset: -front +behind [the nozzle]
 
 #if ANYCUBIC_PROBE_VERSION == 2
-  #define Z_PROBE_OFFSET_FROM_EXTRUDER -16.8     // Z offset: -below +above  [the nozzle]
+  #define Z_PROBE_OFFSET_FROM_EXTRUDER -16.8  // Z offset: -below +above  [the nozzle]
 #elif ANYCUBIC_PROBE_VERSION == 1
-  #define Z_PROBE_OFFSET_FROM_EXTRUDER -19.0 // Z offset: -below +above  [the nozzle]
+  #define Z_PROBE_OFFSET_FROM_EXTRUDER -19.0  // Z offset: -below +above  [the nozzle]
 #else
-  #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above  [the nozzle]
+  #define Z_PROBE_OFFSET_FROM_EXTRUDER   0    // Z offset: -below +above  [the nozzle]
 #endif
 
 // Certain types of probes need to stay away from edges

Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/delta/generic/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/makibox/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/wt150/Configuration_adv.h

 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/gcode/motion/G0_G1.cpp

   #if ENABLED(G0_FEEDRATE)
     float saved_g1_feedrate_mm_s;
   #endif
-  
+
   if (IsRunning() && G0_G1_CONDITION) {
-    
+
     #if ENABLED(G0_FEEDRATE)
       if (fast_move) {
         // Save standard feedrate before setting feedrate to fast/g0
     #endif
 
     #if ENABLED(G0_FEEDRATE)
-      // save G0 feedrate, and restore standard feedrate as soon as possible 
+      // save G0 feedrate, and restore standard feedrate as soon as possible
       if (fast_move) {
         saved_g0_feedrate_mm_s = feedrate_mm_s;
         feedrate_mm_s = saved_g1_feedrate_mm_s;
       }
     #endif
-    
+
     #if ENABLED(NANODLP_Z_SYNC)
       #if ENABLED(NANODLP_ALL_AXIS)
         #define _MOVE_SYNC parser.seenval('X') || parser.seenval('Y') || parser.seenval('Z')  // For any move wait and output sync message