thomas
/
marlin
Watch 1
Star 0
Fork 0
Code Issues 0 Pull Requests 0 Releases 0 Wiki Activity
Browse Source

Fix spelling 

PROBABLE ->PROBEABLE
This is follow-up to #3069?
esenapaj 9 years ago
parent
c80e5aca30
commit
89a845659a
7 changed files with 27 additions and 27 deletions
Unified View Show Diff Stats
  1. 1
    1
      Marlin/Marlin_main.cpp
  2. 1
    1
      Marlin/SanityCheck.h
  3. 5
    5
      Marlin/example_configurations/delta/biv2.5/Configuration.h
  4. 5
    5
      Marlin/example_configurations/delta/generic/Configuration.h
  5. 5
    5
      Marlin/example_configurations/delta/kossel_mini/Configuration.h
  6. 5
    5
      Marlin/example_configurations/delta/kossel_pro/Configuration.h
  7. 5
    5
      Marlin/example_configurations/delta/kossel_xl/Configuration.h

+ 1
- 1
Marlin/Marlin_main.cpp View File

3079 
           #if ENABLED(DELTA)
 3079 
           #if ENABLED(DELTA)
3080 
             // Avoid probing the corners (outside the round or hexagon print surface) on a delta printer.
 3080 
             // Avoid probing the corners (outside the round or hexagon print surface) on a delta printer.
3081 
             float distance_from_center = sqrt(xProbe * xProbe + yProbe * yProbe);
 3081 
             float distance_from_center = sqrt(xProbe * xProbe + yProbe * yProbe);
3082 
-            if (distance_from_center > DELTA_PROBABLE_RADIUS) continue;
3082 
+            if (distance_from_center > DELTA_PROBEABLE_RADIUS) continue;
3083 
           #endif //DELTA
 3083 
           #endif //DELTA
3084
3084
3085 
           ProbeAction act;
 3085 
           ProbeAction act;

+ 1
- 1
Marlin/SanityCheck.h View File

198 
    * Check if Probe_Offset * Grid Points is greater than Probing Range
 198 
    * Check if Probe_Offset * Grid Points is greater than Probing Range
199 
    */
 199 
    */
200 
   #if ENABLED(AUTO_BED_LEVELING_GRID)
 200 
   #if ENABLED(AUTO_BED_LEVELING_GRID)
201 
-    #ifndef DELTA_PROBABLE_RADIUS
201 
+    #ifndef DELTA_PROBEABLE_RADIUS
202 
       // Be sure points are in the right order
 202 
       // Be sure points are in the right order
203 
       #if LEFT_PROBE_BED_POSITION > RIGHT_PROBE_BED_POSITION
 203 
       #if LEFT_PROBE_BED_POSITION > RIGHT_PROBE_BED_POSITION
204 
         #error LEFT_PROBE_BED_POSITION must be less than RIGHT_PROBE_BED_POSITION.
 204 
         #error LEFT_PROBE_BED_POSITION must be less than RIGHT_PROBE_BED_POSITION.

+ 5
- 5
Marlin/example_configurations/delta/biv2.5/Configuration.h View File

545 
   #if ENABLED(AUTO_BED_LEVELING_GRID)
 545 
   #if ENABLED(AUTO_BED_LEVELING_GRID)
546
546
547 
     // Set the rectangle in which to probe.
 547 
     // Set the rectangle in which to probe.
548 
-    #define DELTA_PROBABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
549 
-    #define LEFT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS
550 
-    #define RIGHT_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS
551 
-    #define FRONT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS
552 
-    #define BACK_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS
548 
+    #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
549 
+    #define LEFT_PROBE_BED_POSITION -DELTA_PROBEABLE_RADIUS
550 
+    #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
551 
+    #define FRONT_PROBE_BED_POSITION -DELTA_PROBEABLE_RADIUS
552 
+    #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
553
553
554 
     #define MIN_PROBE_EDGE 10 // The Z probe minimum square sides can be no smaller than this.
 554 
     #define MIN_PROBE_EDGE 10 // The Z probe minimum square sides can be no smaller than this.
555
555

+ 5
- 5
Marlin/example_configurations/delta/generic/Configuration.h View File

545 
   #if ENABLED(AUTO_BED_LEVELING_GRID)
 545 
   #if ENABLED(AUTO_BED_LEVELING_GRID)
546
546
547 
     // set the rectangle in which to probe
 547 
     // set the rectangle in which to probe
548 
-    #define DELTA_PROBABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
549 
-    #define LEFT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS
550 
-    #define RIGHT_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS
551 
-    #define FRONT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS
552 
-    #define BACK_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS
548 
+    #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
549 
+    #define LEFT_PROBE_BED_POSITION -DELTA_PROBEABLE_RADIUS
550 
+    #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
551 
+    #define FRONT_PROBE_BED_POSITION -DELTA_PROBEABLE_RADIUS
552 
+    #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
553
553
554 
     #define MIN_PROBE_EDGE 10 // The Z probe minimum square sides can be no smaller than this.
 554 
     #define MIN_PROBE_EDGE 10 // The Z probe minimum square sides can be no smaller than this.
555
555

+ 5
- 5
Marlin/example_configurations/delta/kossel_mini/Configuration.h View File

545 
   #if ENABLED(AUTO_BED_LEVELING_GRID)
 545 
   #if ENABLED(AUTO_BED_LEVELING_GRID)
546
546
547 
     // set the rectangle in which to probe
 547 
     // set the rectangle in which to probe
548 
-    #define DELTA_PROBABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
549 
-    #define LEFT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS
550 
-    #define RIGHT_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS
551 
-    #define FRONT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS
552 
-    #define BACK_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS
548 
+    #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
549 
+    #define LEFT_PROBE_BED_POSITION -DELTA_PROBEABLE_RADIUS
550 
+    #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
551 
+    #define FRONT_PROBE_BED_POSITION -DELTA_PROBEABLE_RADIUS
552 
+    #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
553
553
554 
     #define MIN_PROBE_EDGE 10 // The Z probe minimum square sides can be no smaller than this.
 554 
     #define MIN_PROBE_EDGE 10 // The Z probe minimum square sides can be no smaller than this.
555
555

+ 5
- 5
Marlin/example_configurations/delta/kossel_pro/Configuration.h View File

532 
   #if ENABLED(AUTO_BED_LEVELING_GRID)
 532 
   #if ENABLED(AUTO_BED_LEVELING_GRID)
533
533
534 
     // set the rectangle in which to probe
 534 
     // set the rectangle in which to probe
535 
-    #define DELTA_PROBABLE_RADIUS (DELTA_PRINTABLE_RADIUS-25)
536 
-    #define LEFT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS
537 
-    #define RIGHT_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS
538 
-    #define FRONT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS
539 
-    #define BACK_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS
535 
+    #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS-25)
536 
+    #define LEFT_PROBE_BED_POSITION -DELTA_PROBEABLE_RADIUS
537 
+    #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
538 
+    #define FRONT_PROBE_BED_POSITION -DELTA_PROBEABLE_RADIUS
539 
+    #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
540
540
541 
     #define MIN_PROBE_EDGE 10 // The Z probe minimum square sides can be no smaller than this.
 541 
     #define MIN_PROBE_EDGE 10 // The Z probe minimum square sides can be no smaller than this.
542
542

+ 5
- 5
Marlin/example_configurations/delta/kossel_xl/Configuration.h View File

537
537
538 
   #if ENABLED(AUTO_BED_LEVELING_GRID)
 538 
   #if ENABLED(AUTO_BED_LEVELING_GRID)
539
539
540 
-    #define DELTA_PROBABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
541 
-    #define LEFT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS
542 
-    #define RIGHT_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS
543 
-    #define FRONT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS
544 
-    #define BACK_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS
540 
+    #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
541 
+    #define LEFT_PROBE_BED_POSITION -DELTA_PROBEABLE_RADIUS
542 
+    #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
543 
+    #define FRONT_PROBE_BED_POSITION -DELTA_PROBEABLE_RADIUS
544 
+    #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
545
545
546 
     #define MIN_PROBE_EDGE 20 // The Z probe minimum square sides can be no smaller than this.
 546 
     #define MIN_PROBE_EDGE 20 // The Z probe minimum square sides can be no smaller than this.
547
547

Write Preview
Loading…
Cancel
Save