"Init. Media" => "Attach Media"

Marlin/src/lcd/language/language_an.h

   PROGMEM Language_Str MSG_AUTORETRACT                     = _UxGT("Retraccion auto.");
   PROGMEM Language_Str MSG_FILAMENTCHANGE                  = _UxGT("Cambear filamento");
   PROGMEM Language_Str MSG_FILAMENTCHANGE_E                = _UxGT("Cambear filamento *");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Encetan. tarcheta");
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Encetan. tarcheta");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Cambiar tarcheta");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Sonda Z fuera");
   PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Reset BLTouch");

Marlin/src/lcd/language/language_bg.h

   PROGMEM Language_Str MSG_AUTORETRACT                     = _UxGT("Автоoткат");
   PROGMEM Language_Str MSG_FILAMENTCHANGE                  = _UxGT("Смяна нишка");
   PROGMEM Language_Str MSG_FILAMENTCHANGE_E                = _UxGT("Смяна нишка *");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Иниц. SD-Карта");
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Иниц. SD-Карта");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Смяна SD-Карта");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Z-сондата е извадена");
   PROGMEM Language_Str MSG_ZPROBE_ZOFFSET                  = _UxGT("Z Отстояние");

Marlin/src/lcd/language/language_ca.h

   PROGMEM Language_Str MSG_AUTORETRACT                     = _UxGT("Auto retraccio");
   PROGMEM Language_Str MSG_FILAMENTCHANGE                  = _UxGT("Canvia filament");
   PROGMEM Language_Str MSG_FILAMENTCHANGE_E                = _UxGT("Canvia filament *");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Inicialitza SD");
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Inicialitza SD");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Canvia SD");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Sonda Z fora");
   PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Reinicia BLTouch");

Marlin/src/lcd/language/language_cz.h

   PROGMEM Language_Str MSG_FILAMENTUNLOAD_E                = _UxGT("Vysunout filament *");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL              = _UxGT("Vysunout vše");
 
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Načíst médium");
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Načíst médium");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Vyměnit médium");
   PROGMEM Language_Str MSG_RELEASE_MEDIA                   = _UxGT("Vysunout médium");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Sonda Z mimo podl");

Marlin/src/lcd/language/language_de.h

   PROGMEM Language_Str MSG_FILAMENTUNLOAD                  = _UxGT("Filament entladen");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_E                = _UxGT("Filament entladen *");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL              = _UxGT("Alles entladen");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Medium initial.");  // Manually initialize the SD-card via user interface
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Medium initial.");  // Manually initialize the SD-card via user interface
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Medium getauscht"); // SD-card changed by user. For machines with no autocarddetect. Both send "M21"
   PROGMEM Language_Str MSG_RELEASE_MEDIA                   = _UxGT("Medium freigeben"); // if Marlin gets confused - M22
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Z-Sonde außerhalb");

Marlin/src/lcd/language/language_el.h

   PROGMEM Language_Str MSG_AUTORETRACT                     = _UxGT("Αυτόματη ανάσυρση");
   PROGMEM Language_Str MSG_FILAMENTCHANGE                  = _UxGT("Αλλαγή νήματος");
   PROGMEM Language_Str MSG_FILAMENTCHANGE_E                = _UxGT("Αλλαγή νήματος *");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Προετοιμασία κάρτας SD");  //SHORTEN
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Προετοιμασία κάρτας SD");  //SHORTEN
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Αλλαγή κάρτας SD");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Διερεύνηση Z εκτός Επ.Εκτύπωσης"); //SHORTEN
   PROGMEM Language_Str MSG_YX_UNHOMED                      = _UxGT("Επαναφορά Χ/Υ πριν από Ζ"); //SHORTEN

Marlin/src/lcd/language/language_el_gr.h

   PROGMEM Language_Str MSG_AUTORETRACT                     = _UxGT("Αυτόματη ανάσυρση");
   PROGMEM Language_Str MSG_FILAMENTCHANGE                  = _UxGT("Αλλαγή νήματος");
   PROGMEM Language_Str MSG_FILAMENTCHANGE_E                = _UxGT("Αλλαγή νήματος *");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Προετοιμασία κάρτας SD");
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Προετοιμασία κάρτας SD");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Αλλαγή κάρτας SD");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Διερεύνηση Z εκτός κλίνης");
   PROGMEM Language_Str MSG_YX_UNHOMED                      = _UxGT("Επαναφορά Χ/Υ πριν από Ζ");

Marlin/src/lcd/language/language_en.h

   PROGMEM Language_Str MSG_FILAMENTUNLOAD                  = _UxGT("Unload Filament");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_E                = _UxGT("Unload Filament *");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL              = _UxGT("Unload All");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Init. Media");
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Attach Media");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Change Media");
   PROGMEM Language_Str MSG_RELEASE_MEDIA                   = _UxGT("Release Media");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Z Probe Past Bed");

Marlin/src/lcd/language/language_es.h

   PROGMEM Language_Str MSG_FILAMENTUNLOAD                  = _UxGT("Descargar filamento");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_E                = _UxGT("Descargar fil. *");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL              = _UxGT("Descargar todo");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Iniciar SD/USB");
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Iniciar SD/USB");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Cambiar SD/USB");
   PROGMEM Language_Str MSG_RELEASE_MEDIA                   = _UxGT("Lanzar SD/USB");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Sonda Z fuera cama");

Marlin/src/lcd/language/language_eu.h

   PROGMEM Language_Str MSG_FILAMENTUNLOAD                  = _UxGT("Harizpia deskargatu");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_E                = _UxGT("Harizpia deskargatu *");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL              = _UxGT("Erabat deskargatu");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Hasieratu SD-a");
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Hasieratu SD-a");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Aldatu txartela");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Z zunda kanpora");
   PROGMEM Language_Str MSG_SKEW_FACTOR                     = _UxGT("Okertze faktorea");

Marlin/src/lcd/language/language_fr.h

   PROGMEM Language_Str MSG_FILAMENTUNLOAD                  = _UxGT("Retrait filament");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_E                = _UxGT("Retrait filament *");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL              = _UxGT("Retirer tout");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Charger le média");
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Charger le média");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Actualiser média");
   PROGMEM Language_Str MSG_RELEASE_MEDIA                   = _UxGT("Retirer le média");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Sonde Z hors lit");

Marlin/src/lcd/language/language_gl.h

   PROGMEM Language_Str MSG_AUTORETRACT                     = _UxGT("Retraccion auto.");
   PROGMEM Language_Str MSG_FILAMENTCHANGE                  = _UxGT("Cambiar filamen.");
   PROGMEM Language_Str MSG_FILAMENTCHANGE_E                = _UxGT("Cambiar filamen. *");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Iniciando SD");
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Iniciando SD");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Cambiar SD");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Sonda-Z sen cama");
   PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("Comprobar BLTouch");

Marlin/src/lcd/language/language_hr.h

   PROGMEM Language_Str MSG_STOPPED                         = _UxGT("ZAUSTAVLJEN. ");
   PROGMEM Language_Str MSG_FILAMENTCHANGE                  = _UxGT("Promijeni filament");
   PROGMEM Language_Str MSG_FILAMENTCHANGE_E                = _UxGT("Promijeni filament *");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Init. SD karticu");
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Init. SD karticu");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Promijeni SD karticu");
   PROGMEM Language_Str MSG_HEATING_FAILED_LCD              = _UxGT("Grijanje neuspješno");
   PROGMEM Language_Str MSG_HEATING                         = _UxGT("Grijanje...");

Marlin/src/lcd/language/language_it.h

   PROGMEM Language_Str MSG_FILAMENTUNLOAD                  = _UxGT("Rimuovi filamento");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_E                = _UxGT("Rimuovi filamento *");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL              = _UxGT("Rimuovi tutto");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Inizializ. media");
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Inizializ. media");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Cambia media");
   PROGMEM Language_Str MSG_RELEASE_MEDIA                   = _UxGT("Rilascia media");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Z probe fuori piatto");

Marlin/src/lcd/language/language_jp_kana.h

   PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVERF        = _UxGT("ホショウソクド mm/s");            // "UnRet  V"
   PROGMEM Language_Str MSG_AUTORETRACT                     = _UxGT("ジドウヒキコミ");                 // "AutoRetr."
   PROGMEM Language_Str MSG_FILAMENTCHANGE                  = _UxGT("フィラメントコウカン");              // "Change filament"
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("メディアサイヨミコミ");             // "Init. SD card"
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("メディアサイヨミコミ");             // "Init. SD card"
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("メディアコウカン");               // "Change SD card"
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Zプローブ ベッドガイ");            // "Z probe out. bed"
   PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("BLTouch ジコシンダン");          // "BLTouch Self-Test"

Marlin/src/lcd/language/language_nl.h

   PROGMEM Language_Str MSG_AUTORETRACT                     = _UxGT("AutoRetr.");
   PROGMEM Language_Str MSG_FILAMENTCHANGE                  = _UxGT("Verv. Filament");
   PROGMEM Language_Str MSG_FILAMENTCHANGE_E                = _UxGT("Verv. Filament *");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Init. SD kaart");
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Init. SD kaart");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Verv. SD Kaart");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Z probe uit. bed");
   PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("BLTouch Zelf-Test");

Marlin/src/lcd/language/language_pl.h

   PROGMEM Language_Str MSG_FILAMENTUNLOAD                  = _UxGT("Wyładuj Filament");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_E                = _UxGT("Wyładuj Filament *");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL              = _UxGT("Wyładuj wszystkie");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Inicjal. karty SD");
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Inicjal. karty SD");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Zmiana karty SD");
   PROGMEM Language_Str MSG_RELEASE_MEDIA                   = _UxGT("Zwolnienie karty");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Sonda Z za stołem");

Marlin/src/lcd/language/language_pt.h

   PROGMEM Language_Str MSG_AUTORETRACT                     = _UxGT(" AutoRetr.");
   PROGMEM Language_Str MSG_FILAMENTCHANGE                  = _UxGT("Trocar filamento");
   PROGMEM Language_Str MSG_FILAMENTCHANGE_E                = _UxGT("Trocar filamento *");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Inici. cartão SD");
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Inici. cartão SD");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Trocar cartão SD");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Sensor fora/base");
   PROGMEM Language_Str MSG_ZPROBE_ZOFFSET                  = _UxGT("Desvio Z");

Marlin/src/lcd/language/language_pt_br.h

   PROGMEM Language_Str MSG_FILAMENTLOAD_E                  = _UxGT("Carregar Filamento *");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_E                = _UxGT("Descarreg. Filamento *");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL              = _UxGT("Descarregar Todos");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Iniciar SD");
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Iniciar SD");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Trocar SD");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Sonda fora da mesa");
   PROGMEM Language_Str MSG_SKEW_FACTOR                     = _UxGT("Fator de Cisalho");

Marlin/src/lcd/language/language_ru.h

   PROGMEM Language_Str MSG_FILAMENTLOAD_E                  = _UxGT("Загрузка филамента *");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_E                = _UxGT("Выгрузка филамента *");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL              = _UxGT("Выгрузить всё");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Активировать SD");
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Активировать SD");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Сменить SD карту");
   PROGMEM Language_Str MSG_RELEASE_MEDIA                   = _UxGT("Деактивировать SD");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Z-датчик вне стола");

Marlin/src/lcd/language/language_sk.h

   PROGMEM Language_Str MSG_FILAMENTUNLOAD                  = _UxGT("Vysunúť filament");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_E                = _UxGT("Vysunúť filament *");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL              = _UxGT("Vysunúť všetko");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Načítať SD kartu");
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Načítať SD kartu");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Vymeniť SD kartu");
   PROGMEM Language_Str MSG_RELEASE_MEDIA                   = _UxGT("Odpojiť SD kartu");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Sonda Z mimo podl.");

Marlin/src/lcd/language/language_tr.h

   PROGMEM Language_Str MSG_FILAMENTUNLOAD                  = _UxGT("Filaman Çıkart");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_E                = _UxGT("Filaman Çıkart *");
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL              = _UxGT("Tümünü Çıkart");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("SD Kart Başlatılıyor");
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("SD Kart Başlatılıyor");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("SD Kart Değiştir");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Z Prob Açık. Tabla");
   PROGMEM Language_Str MSG_SKEW_FACTOR                     = _UxGT("Çarpıklık Faktörü");

Marlin/src/lcd/language/language_uk.h

   PROGMEM Language_Str MSG_STOPPED                         = _UxGT("ЗУПИНЕНО. ");
   PROGMEM Language_Str MSG_FILAMENTCHANGE                  = _UxGT("Зміна волокна");
   PROGMEM Language_Str MSG_FILAMENTCHANGE_E                = _UxGT("Зміна волокна *");
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Старт SD картки");
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Старт SD картки");
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Заміна SD карти");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Z дет. не в межах");
   PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("BLTouch Само-Тест");

Marlin/src/lcd/language/language_vi.h

   PROGMEM Language_Str MSG_FILAMENTUNLOAD                  = _UxGT("Dỡ dây nhựa");                          // unload filament
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_E                = _UxGT("Dỡ dây nhựa *");                        // unload filament
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL              = _UxGT("Dỡ tất cả");                            // Unload All
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("Khởi tạo phương tiện");                 // Init. media
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("Khởi tạo phương tiện");                 // Init. media
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("Thay phương tiện");                     // Change midea
   PROGMEM Language_Str MSG_RELEASE_MEDIA                   = _UxGT("Phát hành phương tiện");
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Đầu Dò Z qua bàn");                     // Z Probe past bed

Marlin/src/lcd/language/language_zh_CN.h

   PROGMEM Language_Str MSG_FILAMENTUNLOAD                  = _UxGT("卸载丝料");     // "Unload filament"
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_E                = _UxGT("卸载丝料 *");     // "Unload filament"
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL              = _UxGT("卸载全部");     // "Unload All"
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("初始化存储卡");     //"Init. SD card"
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("初始化存储卡");     //"Init. SD card"
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("更换存储卡");     //"Change SD card"
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Z探针在热床之外");     //"Z probe out. bed" Z probe is not within the physical limits
   PROGMEM Language_Str MSG_SKEW_FACTOR                     = _UxGT("偏斜因数");     // "Skew Factor"

Marlin/src/lcd/language/language_zh_TW.h

   PROGMEM Language_Str MSG_FILAMENTUNLOAD                  = _UxGT("卸載絲料");     // "Unload filament"
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_E                = _UxGT("卸載絲料 *");     // "Unload filament"
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL              = _UxGT("卸載全部");     // "Unload All"
-  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("初始化記憶卡");     //"Init. SD card"
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("初始化記憶卡");     //"Init. SD card"
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("更換記憶卡");     //"Change SD card"
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Z探針在熱床之外");     //"Z probe out. bed" Z probe is not within the physical limits
   PROGMEM Language_Str MSG_SKEW_FACTOR                     = _UxGT("偏斜因數");     // "Skew Factor"

Marlin/src/lcd/menu/menu_main.cpp

         #if PIN_EXISTS(SD_DETECT)
           ACTION_ITEM(MSG_NO_MEDIA, nullptr);
         #else
-          GCODES_ITEM(MSG_INIT_MEDIA, M21_STR);
+          GCODES_ITEM(MSG_ATTACH_MEDIA, M21_STR);
           ACTION_ITEM(MSG_MEDIA_RELEASED, nullptr);
         #endif
       }
       #if PIN_EXISTS(SD_DETECT)
         ACTION_ITEM(MSG_NO_MEDIA, nullptr);
       #else
-        GCODES_ITEM(MSG_INIT_MEDIA, M21_STR);
+        GCODES_ITEM(MSG_ATTACH_MEDIA, M21_STR);
         ACTION_ITEM(MSG_MEDIA_RELEASED, nullptr);
       #endif
     }