Update Slovak language (#18210)

Marlin/src/lcd/language/language_sk.h

@@ -266,6 +266,10 @@ namespace Language_sk {
   PROGMEM Language_Str MSG_LCD_OFF                         = _UxGT("Vyp");
   PROGMEM Language_Str MSG_PID_AUTOTUNE                    = _UxGT("PID kalibrácia");
   PROGMEM Language_Str MSG_PID_AUTOTUNE_E                  = _UxGT("PID kalibrácia *");
+  PROGMEM Language_Str MSG_PID_AUTOTUNE_DONE               = _UxGT("PID kal. dokončená");
+  PROGMEM Language_Str MSG_PID_BAD_EXTRUDER_NUM            = _UxGT("Auto-kal. zlyhala. Zlý extrúder.");
+  PROGMEM Language_Str MSG_PID_TEMP_TOO_HIGH               = _UxGT("Auto-kal. zlyhala. Príliš vysoká tepl.");
+  PROGMEM Language_Str MSG_PID_TIMEOUT                     = _UxGT("Auto-kal. zlyhala! Čas vypršal.");
   PROGMEM Language_Str MSG_SELECT                          = _UxGT("Vybrať");
   PROGMEM Language_Str MSG_SELECT_E                        = _UxGT("Vybrať *");
   PROGMEM Language_Str MSG_ACC                             = _UxGT("Zrýchlenie");
@@ -291,6 +295,8 @@ namespace Language_sk {
   PROGMEM Language_Str MSG_AMAX_EN                         = _UxGT("Amax *");
   PROGMEM Language_Str MSG_A_RETRACT                       = _UxGT("A-retrakt");
   PROGMEM Language_Str MSG_A_TRAVEL                        = _UxGT("A-prejazd");
+  PROGMEM Language_Str MSG_XY_FREQUENCY_LIMIT              = _UxGT("Max. frekvencia");
+  PROGMEM Language_Str MSG_XY_FREQUENCY_FEEDRATE           = _UxGT("Min. posun");
   PROGMEM Language_Str MSG_STEPS_PER_MM                    = _UxGT("Kroky/mm");
   PROGMEM Language_Str MSG_A_STEPS                         = LCD_STR_A _UxGT("krokov/mm");
   PROGMEM Language_Str MSG_B_STEPS                         = LCD_STR_B _UxGT("krokov/mm");
@@ -315,7 +321,7 @@ namespace Language_sk {
   PROGMEM Language_Str MSG_ERR_EEPROM_CRC                  = _UxGT("Chyba: EEPROM CRC");
   PROGMEM Language_Str MSG_ERR_EEPROM_INDEX                = _UxGT("Chyba: EEPROM Index");
   PROGMEM Language_Str MSG_ERR_EEPROM_VERSION              = _UxGT("Chyba: Verzia EEPROM");
-  PROGMEM Language_Str MSG_SETTINGS_STORED                 = _UxGT("Nastav. uložené");
+  PROGMEM Language_Str MSG_SETTINGS_STORED                 = _UxGT("Nastavenie uložené");
   PROGMEM Language_Str MSG_MEDIA_UPDATE                    = _UxGT("Aktualizovať z SD");
   PROGMEM Language_Str MSG_RESET_PRINTER                   = _UxGT("Reštart. tlačiar.");
   PROGMEM Language_Str MSG_REFRESH                         = LCD_STR_REFRESH  _UxGT("Obnoviť");
@@ -328,6 +334,7 @@ namespace Language_sk {
   PROGMEM Language_Str MSG_BUTTON_STOP                     = _UxGT("Zastaviť");
   PROGMEM Language_Str MSG_BUTTON_PRINT                    = _UxGT("Tlačiť");
   PROGMEM Language_Str MSG_BUTTON_RESET                    = _UxGT("Vynulovať");
+  PROGMEM Language_Str MSG_BUTTON_IGNORE                   = _UxGT("Ignorovať");
   PROGMEM Language_Str MSG_BUTTON_CANCEL                   = _UxGT("Zrušiť");
   PROGMEM Language_Str MSG_BUTTON_DONE                     = _UxGT("Hotovo");
   PROGMEM Language_Str MSG_BUTTON_BACK                     = _UxGT("Naspäť");
@@ -361,11 +368,22 @@ namespace Language_sk {
   PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAPF   = _UxGT("S UnRet V");
   PROGMEM Language_Str MSG_AUTORETRACT                     = _UxGT("AutoRetr.");
   PROGMEM Language_Str MSG_FILAMENT_SWAP_LENGTH            = _UxGT("Dĺžka výmeny");
+  PROGMEM Language_Str MSG_FILAMENT_SWAP_EXTRA             = _UxGT("Vymeniť naviac");
   PROGMEM Language_Str MSG_FILAMENT_PURGE_LENGTH           = _UxGT("Dĺžka vytlačenia");
   PROGMEM Language_Str MSG_TOOL_CHANGE                     = _UxGT("Výmena nástroja");
   PROGMEM Language_Str MSG_TOOL_CHANGE_ZLIFT               = _UxGT("Zdvihnúť Z");
-  PROGMEM Language_Str MSG_SINGLENOZZLE_PRIME_SPD          = _UxGT("Primárna rýchl.");
-  PROGMEM Language_Str MSG_SINGLENOZZLE_RETRACT_SPD        = _UxGT("Rýchl. retrakcie");
+  PROGMEM Language_Str MSG_SINGLENOZZLE_PRIME_SPEED        = _UxGT("Primárna rýchl.");
+  PROGMEM Language_Str MSG_SINGLENOZZLE_RETRACT_SPEED      = _UxGT("Rýchl. retrakcie");
+  PROGMEM Language_Str MSG_FILAMENT_PARK_ENABLED           = _UxGT("Parkovať hlavu");
+  PROGMEM Language_Str MSG_SINGLENOZZLE_UNRETRACT_SPEED    = _UxGT("Rýchl. obnovenia");
+  PROGMEM Language_Str MSG_SINGLENOZZLE_FAN_SPEED          = _UxGT("Rýchlosť vent.");
+  PROGMEM Language_Str MSG_SINGLENOZZLE_FAN_TIME           = _UxGT("Doba fúkania");
+  PROGMEM Language_Str MSG_TOOL_MIGRATION_ON               = _UxGT("Auto-Zap");
+  PROGMEM Language_Str MSG_TOOL_MIGRATION_OFF              = _UxGT("Auto-Vyp");
+  PROGMEM Language_Str MSG_TOOL_MIGRATION                  = _UxGT("Výmena nástroja");
+  PROGMEM Language_Str MSG_TOOL_MIGRATION_AUTO             = _UxGT("Auto-výmena");
+  PROGMEM Language_Str MSG_TOOL_MIGRATION_END              = _UxGT("Posl. extruder");
+  PROGMEM Language_Str MSG_TOOL_MIGRATION_SWAP             = _UxGT("Vymeniť za *");
   PROGMEM Language_Str MSG_FILAMENTCHANGE                  = _UxGT("Vymeniť filament");
   PROGMEM Language_Str MSG_FILAMENTCHANGE_E                = _UxGT("Vymeniť filament *");
   PROGMEM Language_Str MSG_FILAMENTLOAD                    = _UxGT("Zaviesť filament");
@@ -460,6 +478,7 @@ namespace Language_sk {
   PROGMEM Language_Str MSG_INFO_PROTOCOL                   = _UxGT("Protokol");
   PROGMEM Language_Str MSG_INFO_RUNAWAY_OFF                = _UxGT("Tepl. ochrana: VYP");
   PROGMEM Language_Str MSG_INFO_RUNAWAY_ON                 = _UxGT("Tepl. ochrana: ZAP");
+  PROGMEM Language_Str MSG_HOTEND_IDLE_TIMEOUT             = _UxGT("Vypr.čas nečinnosti");
 
   PROGMEM Language_Str MSG_CASE_LIGHT                      = _UxGT("Osvetlenie");
   PROGMEM Language_Str MSG_CASE_LIGHT_BRIGHTNESS           = _UxGT("Jas svetla");
@@ -549,6 +568,9 @@ namespace Language_sk {
   PROGMEM Language_Str MSG_SNAKE                           = _UxGT("Had");
   PROGMEM Language_Str MSG_MAZE                            = _UxGT("Bludisko");
 
+  PROGMEM Language_Str MSG_BAD_PAGE                        = _UxGT("Chyb. index stránky");
+  PROGMEM Language_Str MSG_BAD_PAGE_SPEED                  = _UxGT("Chyb. rých. stránky");
+
   //
   // Filament Change screens show up to 3 lines on a 4-line display
   //                        ...or up to 2 lines on a 3-line display