thomas
/
marlin
關註 1
收藏 0
複製 0
程式碼 問題管理 0 合併請求 0 版本發佈 0 Wiki Activity
瀏覽代碼

Remove obsolete TMC_USE_CHAIN

Scott Lahteine 5 年之前
父節點
ca1a3476cb
當前提交
94d3153fb6
共有 56 個文件被更改，包括 0 次插入 和 112 次删除
分割檢視 顯示文件統計
  1. 0
    2
      config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
  2. 0
    2
      config/examples/Einstart-S/Configuration_adv.h
  3. 0
    2
      config/examples/FYSETC/AIO_II/Configuration_adv.h
  4. 0
    2
      config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h
  5. 0
    2
      config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h
  6. 0
    2
      config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
  7. 0
    2
      config/examples/FYSETC/Cheetah/base/Configuration_adv.h
  8. 0
    2
      config/examples/FYSETC/F6_13/Configuration_adv.h
  9. 0
    2
      config/examples/Felix/Configuration_adv.h
  10. 0
    2
      config/examples/FlashForge/CreatorPro/Configuration_adv.h
  11. 0
    2
      config/examples/FolgerTech/i3-2020/Configuration_adv.h
  12. 0
    2
      config/examples/Formbot/Raptor/Configuration_adv.h
  13. 0
    2
      config/examples/Formbot/T_Rex_2+/Configuration_adv.h
  14. 0
    2
      config/examples/Formbot/T_Rex_3/Configuration_adv.h
  15. 0
    2
      config/examples/Geeetech/A10/Configuration_adv.h
  16. 0
    2
      config/examples/Geeetech/A10M/Configuration_adv.h
  17. 0
    2
      config/examples/Geeetech/A20M/Configuration_adv.h
  18. 0
    2
      config/examples/Geeetech/MeCreator2/Configuration_adv.h
  19. 0
    2
      config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
  20. 0
    2
      config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
  21. 0
    2
      config/examples/HMS434/Configuration_adv.h
  22. 0
    2
      config/examples/Infitary/i3-M508/Configuration_adv.h
  23. 0
    2
      config/examples/JGAurora/A1/Configuration_adv.h
  24. 0
    2
      config/examples/JGAurora/A5/Configuration_adv.h
  25. 0
    2
      config/examples/JGAurora/A5S/Configuration_adv.h
  26. 0
    2
      config/examples/MakerParts/Configuration_adv.h
  27. 0
    2
      config/examples/Malyan/M150/Configuration_adv.h
  28. 0
    2
      config/examples/Malyan/M200/Configuration_adv.h
  29. 0
    2
      config/examples/Micromake/C1/enhanced/Configuration_adv.h
  30. 0
    2
      config/examples/Mks/Robin/Configuration_adv.h
  31. 0
    2
      config/examples/Mks/Sbase/Configuration_adv.h
  32. 0
    2
      config/examples/RapideLite/RL200/Configuration_adv.h
  33. 0
    2
      config/examples/RigidBot/Configuration_adv.h
  34. 0
    2
      config/examples/SCARA/Configuration_adv.h
  35. 0
    2
      config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
  36. 0
    2
      config/examples/Sanguinololu/Configuration_adv.h
  37. 0
    2
      config/examples/Tevo/Michelangelo/Configuration_adv.h
  38. 0
    2
      config/examples/Tevo/Tarantula Pro/Configuration_adv.h
  39. 0
    2
      config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h
  40. 0
    2
      config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h
  41. 0
    2
      config/examples/TheBorg/Configuration_adv.h
  42. 0
    2
      config/examples/TinyBoy2/Configuration_adv.h
  43. 0
    2
      config/examples/Tronxy/X3A/Configuration_adv.h
  44. 0
    2
      config/examples/Tronxy/X5S-2E/Configuration_adv.h
  45. 0
    2
      config/examples/UltiMachine/Archim1/Configuration_adv.h
  46. 0
    2
      config/examples/UltiMachine/Archim2/Configuration_adv.h
  47. 0
    2
      config/examples/VORONDesign/Configuration_adv.h
  48. 0
    2
      config/examples/Velleman/K8200/Configuration_adv.h
  49. 0
    2
      config/examples/Velleman/K8400/Configuration_adv.h
  50. 0
    2
      config/examples/WASP/PowerWASP/Configuration_adv.h
  51. 0
    2
      config/examples/Wanhao/Duplicator 6/Configuration_adv.h
  52. 0
    2
      config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h
  53. 0
    2
      config/examples/gCreate/gMax1.5+/Configuration_adv.h
  54. 0
    2
      config/examples/makibox/Configuration_adv.h
  55. 0
    2
      config/examples/tvrrug/Round2/Configuration_adv.h
  56. 0
    2
      config/examples/wt150/Configuration_adv.h

+ 0
- 2
config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Einstart-S/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/FYSETC/AIO_II/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h 查看文件 

@@ -1844,8 +1844,6 @@
1844 1844 
   //#define TMC_SW_MISO       -1
1845 1845 
   //#define TMC_SW_SCK        -1
1846 1846
1847 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1848 
-
1849 1847 
   /**
1850 1848 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1851 1849 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/FYSETC/Cheetah/base/Configuration_adv.h 查看文件 

@@ -1844,8 +1844,6 @@
1844 1844 
   //#define TMC_SW_MISO       -1
1845 1845 
   //#define TMC_SW_SCK        -1
1846 1846
1847 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1848 
-
1849 1847 
   /**
1850 1848 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1851 1849 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/FYSETC/F6_13/Configuration_adv.h 查看文件 

@@ -1831,8 +1831,6 @@
1831 1831 
   //#define TMC_SW_MISO       -1
1832 1832 
   //#define TMC_SW_SCK        -1
1833 1833
1834 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1835 
-
1836 1834 
   /**
1837 1835 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1838 1836 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Felix/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/FlashForge/CreatorPro/Configuration_adv.h 查看文件 

@@ -1844,8 +1844,6 @@
1844 1844 
   //#define TMC_SW_MISO       -1
1845 1845 
   //#define TMC_SW_SCK        -1
1846 1846
1847 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1848 
-
1849 1847 
   /**
1850 1848 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1851 1849 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/FolgerTech/i3-2020/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Formbot/Raptor/Configuration_adv.h 查看文件 

@@ -1847,8 +1847,6 @@
1847 1847 
   //#define TMC_SW_MISO       -1
1848 1848 
   //#define TMC_SW_SCK        -1
1849 1849
1850 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1851 
-
1852 1850 
   /**
1853 1851 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1854 1852 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Formbot/T_Rex_2+/Configuration_adv.h 查看文件 

@@ -1849,8 +1849,6 @@
1849 1849 
   //#define TMC_SW_MISO       -1
1850 1850 
   //#define TMC_SW_SCK        -1
1851 1851
1852 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1853 
-
1854 1852 
   /**
1855 1853 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1856 1854 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Formbot/T_Rex_3/Configuration_adv.h 查看文件 

@@ -1849,8 +1849,6 @@
1849 1849 
   //#define TMC_SW_MISO       -1
1850 1850 
   //#define TMC_SW_SCK        -1
1851 1851
1852 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1853 
-
1854 1852 
   /**
1855 1853 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1856 1854 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Geeetech/A10/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Geeetech/A10M/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Geeetech/A20M/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Geeetech/MeCreator2/Configuration_adv.h 查看文件 

@@ -1844,8 +1844,6 @@
1844 1844 
   //#define TMC_SW_MISO       -1
1845 1845 
   //#define TMC_SW_SCK        -1
1846 1846
1847 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1848 
-
1849 1847 
   /**
1850 1848 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1851 1849 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/HMS434/Configuration_adv.h 查看文件 

@@ -1781,8 +1781,6 @@
1781 1781 
   //#define TMC_SW_MISO       -1
1782 1782 
   //#define TMC_SW_SCK        -1
1783 1783
1784 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1785 
-
1786 1784 
   /**
1787 1785 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1788 1786 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Infitary/i3-M508/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/JGAurora/A1/Configuration_adv.h 查看文件 

@@ -1850,8 +1850,6 @@
1850 1850 
   //#define TMC_SW_MISO       -1
1851 1851 
   //#define TMC_SW_SCK        -1
1852 1852
1853 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1854 
-
1855 1853 
   /**
1856 1854 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1857 1855 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/JGAurora/A5/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/JGAurora/A5S/Configuration_adv.h 查看文件 

@@ -1850,8 +1850,6 @@
1850 1850 
   //#define TMC_SW_MISO       -1
1851 1851 
   //#define TMC_SW_SCK        -1
1852 1852
1853 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1854 
-
1855 1853 
   /**
1856 1854 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1857 1855 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/MakerParts/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Malyan/M150/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Malyan/M200/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Micromake/C1/enhanced/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Mks/Robin/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Mks/Sbase/Configuration_adv.h 查看文件 

@@ -1846,8 +1846,6 @@
1846 1846 
   //#define TMC_SW_MISO       -1
1847 1847 
   //#define TMC_SW_SCK        -1
1848 1848
1849 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1850 
-
1851 1849 
   /**
1852 1850 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1853 1851 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/RapideLite/RL200/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/RigidBot/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/SCARA/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Sanguinololu/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Tevo/Michelangelo/Configuration_adv.h 查看文件 

@@ -1844,8 +1844,6 @@
1844 1844 
   //#define TMC_SW_MISO       -1
1845 1845 
   //#define TMC_SW_SCK        -1
1846 1846
1847 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1848 
-
1849 1847 
   /**
1850 1848 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1851 1849 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Tevo/Tarantula Pro/Configuration_adv.h 查看文件 

@@ -1841,8 +1841,6 @@
1841 1841 
   //#define TMC_SW_MISO       -1
1842 1842 
   //#define TMC_SW_SCK        -1
1843 1843
1844 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1845 
-
1846 1844 
   /**
1847 1845 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1848 1846 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h 查看文件 

@@ -1844,8 +1844,6 @@
1844 1844 
   //#define TMC_SW_MISO       -1
1845 1845 
   //#define TMC_SW_SCK        -1
1846 1846
1847 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1848 
-
1849 1847 
   /**
1850 1848 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1851 1849 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h 查看文件 

@@ -1844,8 +1844,6 @@
1844 1844 
   //#define TMC_SW_MISO       -1
1845 1845 
   //#define TMC_SW_SCK        -1
1846 1846
1847 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1848 
-
1849 1847 
   /**
1850 1848 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1851 1849 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/TheBorg/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/TinyBoy2/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Tronxy/X3A/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Tronxy/X5S-2E/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/UltiMachine/Archim1/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/UltiMachine/Archim2/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/VORONDesign/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Velleman/K8200/Configuration_adv.h 查看文件 

@@ -1858,8 +1858,6 @@
1858 1858 
   //#define TMC_SW_MISO       -1
1859 1859 
   //#define TMC_SW_SCK        -1
1860 1860
1861 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1862 
-
1863 1861 
   /**
1864 1862 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1865 1863 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Velleman/K8400/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/WASP/PowerWASP/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Wanhao/Duplicator 6/Configuration_adv.h 查看文件 

@@ -1847,8 +1847,6 @@
1847 1847 
   //#define TMC_SW_MISO       -1
1848 1848 
   //#define TMC_SW_SCK        -1
1849 1849
1850 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1851 
-
1852 1850 
   /**
1853 1851 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1854 1852 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/gCreate/gMax1.5+/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/makibox/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/tvrrug/Round2/Configuration_adv.h 查看文件 

@@ -1845,8 +1845,6 @@
1845 1845 
   //#define TMC_SW_MISO       -1
1846 1846 
   //#define TMC_SW_SCK        -1
1847 1847
1848 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1849 
-
1850 1848 
   /**
1851 1849 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1852 1850 
    * Set the address using jumpers on pins MS1 and MS2.

+ 0
- 2
config/examples/wt150/Configuration_adv.h 查看文件 

@@ -1846,8 +1846,6 @@
1846 1846 
   //#define TMC_SW_MISO       -1
1847 1847 
   //#define TMC_SW_SCK        -1
1848 1848
1849 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
1850 
-
1851 1849 
   /**
1852 1850 
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
1853 1851 
    * Set the address using jumpers on pins MS1 and MS2.

Write Preview
Loading…
取消
儲存