Sanity-check LIGHTWEIGHT_UI, move comment up (#12630)

Marlin/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/default/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Anet/A2/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -818,19 +818,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/ArmEd/Configuration_adv.h

@@ -791,19 +791,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -818,19 +818,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -827,19 +827,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Cartesio/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Einstart-S/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Felix/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -823,19 +823,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -824,19 +824,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/MakerParts/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Malyan/M200/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@@ -827,19 +827,19 @@
     #define DOGLCD_MOSI MOSI_PIN
   #endif
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/RigidBot/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/SCARA/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/TheBorg/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -832,19 +832,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -821,19 +821,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h

@@ -821,19 +821,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -821,19 +821,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -821,19 +821,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -821,19 +821,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h

@@ -821,19 +821,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h

@@ -821,19 +821,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h

@@ -821,19 +821,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -821,19 +821,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -821,19 +821,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -821,19 +821,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/makibox/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@@ -819,19 +819,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/config/examples/wt150/Configuration_adv.h

@@ -820,19 +820,19 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
   #if ENABLED(U8GLIB_ST7920)
-    /**
-     * ST7920-based LCDs can emulate a 16 x 4 character display using
-     * the ST7920 character-generator for very fast screen updates.
-     * Enable LIGHTWEIGHT_UI to use this special display mode.
-     *
-     * Since LIGHTWEIGHT_UI has limited space, the position and status
-     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
-     * length of time to display the status message before clearing.
-     *
-     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
-     * This will prevent position updates from being displayed.
-     */
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20

Marlin/src/inc/SanityCheck.h

@@ -512,6 +512,13 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
 #endif
 
 /**
+ * LCD Lightweight Screen Style
+ */
+#if ENABLED(LIGHTWEIGHT_UI) && DISABLED(U8GLIB_ST7920)
+  #error "LIGHTWEIGHT_UI requires a U8GLIB_ST7920-based display."
+#endif
+
+/**
  * SD File Sorting
  */
 #if ENABLED(SDCARD_SORT_ALPHA)