Apply #pragma once to configuration files

Marlin/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/default/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/default/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/AliExpress/CL-260/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Anet/A2/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Anet/A2/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Anet/A2plus/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Anet/A6/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Anet/A8/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/ArmEd/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/ArmEd/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Azteeg/X5GT/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/BQ/Hephestos/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/BQ/WITBOX/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Cartesio/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Cartesio/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Creality/CR-10/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Creality/CR-10S/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Creality/CR-10mini/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * CR10_STOCKDISPLAY (RAMPS-compatible with single 10-pin plug)
  */
 
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Creality/CR-8/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Creality/Ender-2/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Creality/Ender-3/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Creality/Ender-4/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Einstart-S/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Einstart-S/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Felix/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Felix/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Felix/DUAL/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Formbot/Raptor/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 //#define ROXYs_TRex         // Turn this on to get customizations only available on Roxy's T-Rex 2+
                              // Marlin controlled heat bed, Max7219 debug LED's, less bright LED light level
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Geeetech/GT2560/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Geeetech/MeCreator2/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Infitary/i3-M508/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/JGAurora/A5/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * JGAurora A5 configuration
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/MakerParts/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/MakerParts/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Malyan/M150/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Maylan M150 Configuration
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Malyan/M200/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Malyan/M200/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Micromake/C1/basic/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Mks/Sbase/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/RigidBot/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/RigidBot/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/SCARA/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/SCARA/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/STM32F10/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/STM32F4/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Sanguinololu/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/TheBorg/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/TheBorg/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/TinyBoy2/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 /**
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Tronxy/X1/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Tronxy/X3A/Configuration.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration.h
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#ifndef CONFIGURATION_H
-#define CONFIGURATION_H
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
 
 // Allow servo angle to be edited and saved to EEPROM
 //#define EDITABLE_SERVO_ANGLES
-
-#endif // CONFIGURATION_H

Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h

  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * Configuration_adv.h
  * Basic settings can be found in Configuration.h
  *
  */
-#ifndef CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H_VERSION 020000
 
 // @section temperature
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H