Level bed corners Z-hop height option (#12858)

Marlin/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/default/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/AliExpress/CL-260/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Anet/A2/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Anet/A2plus/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Anet/A6/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Anet/A8/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/ArmEd/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Azteeg/X5GT/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/BQ/Hephestos/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/BQ/WITBOX/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Cartesio/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Creality/CR-10/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Creality/CR-10S/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Creality/CR-10mini/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Creality/CR-8/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Creality/Ender-2/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Creality/Ender-3/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Creality/Ender-4/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Einstart-S/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Felix/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Felix/DUAL/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Formbot/Raptor/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Geeetech/GT2560/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Geeetech/MeCreator2/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Infitary/i3-M508/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/JGAurora/A5/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/MakerParts/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Malyan/M150/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Malyan/M200/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Micromake/C1/basic/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Mks/Robin/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Mks/Sbase/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/RigidBot/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/SCARA/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/STM32F10/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/STM32F4/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Sanguinololu/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/TheBorg/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/TinyBoy2/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Tronxy/X1/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Tronxy/X3A/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Tronxy/X5S/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Tronxy/XY100/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/UltiMachine/Archim1/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/VORONDesign/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Velleman/K8200/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Velleman/K8400/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/adafruit/ST7565/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/delta/MKS/SBASE/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/delta/Tevo Little Monster/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/delta/generic/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/delta/kossel_mini/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/delta/kossel_pro/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/delta/kossel_xl/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/makibox/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/stm32f103ret6/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/tvrrug/Round2/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/config/examples/wt150/Configuration.h

 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/lcd/menu/menu.h

 class TMenuItem : MenuItemBase {
   private:
     typedef typename NAME::type_t type_t;
-    inline static float unscale(const float value)    { return value * (1.0f / NAME::scale);  }
-    inline static float scale(const float value)      { return value * NAME::scale;           }
+    static inline float unscale(const float value)    { return value * (1.0f / NAME::scale);  }
+    static inline float scale(const float value)      { return value * NAME::scale;           }
     static void  load(void *ptr, const int32_t value) { *((type_t*)ptr) = unscale(value);     }
     static char* to_string(const int32_t value)       { return NAME::strfunc(unscale(value)); }
   public:

Marlin/src/lcd/menu/menu_bed_corners.cpp

 #include "../../module/motion.h"
 #include "../../module/planner.h"
 
+#ifndef LEVEL_CORNERS_Z_HOP
+  #define LEVEL_CORNERS_Z_HOP 4.0
+#endif
+
+static_assert(LEVEL_CORNERS_Z_HOP >= 0, "LEVEL_CORNERS_Z_HOP must be >= 0. Please update your configuration.");
+
 /**
  * Level corners, starting in the front-left corner.
  */
 static int8_t bed_corner;
 void _lcd_goto_next_corner() {
-  line_to_z(4.0);
+  line_to_z(LEVEL_CORNERS_Z_HOP);
   switch (bed_corner) {
     case 0:
       current_position[X_AXIS] = X_MIN_BED + LEVEL_CORNERS_INSET;