thomas
/
marlin
Watch 1
Star 0
Fork 0
Code Issues 0 Pull Requests 0 Releases 0 Wiki Activity
Browse Source

Different NEOPIXEL types 

Same as #7728 but for 2.0.x,
Lot of cleanup and remove references in whole code to other "LED files" than leds.h. Now will be much easier to add next drivers/libraries. e.g. FastLED. But bad news, currently FastLED is suporting only RGB devices (no RGBW)
Slawomir Ciunczyk 7 years ago
parent
b30b55307c
commit
a11e6a1022
49 changed files with 646 additions and 300 deletions
Unified View Show Diff Stats
  1. 15
    6
      Marlin/Configuration.h
  2. 1
    1
      Marlin/src/Marlin.cpp
  3. 15
    6
      Marlin/src/config/default/Configuration.h
  4. 15
    6
      Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
  5. 15
    6
      Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
  6. 15
    6
      Marlin/src/config/examples/Anet/A6/Configuration.h
  7. 15
    6
      Marlin/src/config/examples/Anet/A8/Configuration.h
  8. 15
    6
      Marlin/src/config/examples/BQ/Hephestos/Configuration.h
  9. 15
    6
      Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
  10. 15
    6
      Marlin/src/config/examples/BQ/WITBOX/Configuration.h
  11. 15
    6
      Marlin/src/config/examples/Cartesio/Configuration.h
  12. 15
    6
      Marlin/src/config/examples/Creality/CR-10/Configuration.h
  13. 15
    6
      Marlin/src/config/examples/Felix/Configuration.h
  14. 15
    6
      Marlin/src/config/examples/Felix/DUAL/Configuration.h
  15. 15
    6
      Marlin/src/config/examples/Folger Tech/i3-2020/Configuration.h
  16. 15
    6
      Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
  17. 15
    6
      Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
  18. 15
    6
      Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
  19. 15
    6
      Marlin/src/config/examples/Malyan/M150/Configuration.h
  20. 15
    6
      Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
  21. 15
    6
      Marlin/src/config/examples/RigidBot/Configuration.h
  22. 15
    6
      Marlin/src/config/examples/SCARA/Configuration.h
  23. 19
    10
      Marlin/src/config/examples/Sanguinololu/Configuration.h
  24. 15
    6
      Marlin/src/config/examples/TinyBoy2/Configuration.h
  25. 15
    6
      Marlin/src/config/examples/Velleman/K8200/Configuration.h
  26. 15
    6
      Marlin/src/config/examples/Velleman/K8400/Configuration.h
  27. 15
    6
      Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
  28. 15
    6
      Marlin/src/config/examples/adafruit/ST7565/Configuration.h
  29. 15
    6
      Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
  30. 15
    6
      Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
  31. 15
    6
      Marlin/src/config/examples/delta/generic/Configuration.h
  32. 15
    6
      Marlin/src/config/examples/delta/kossel_mini/Configuration.h
  33. 15
    6
      Marlin/src/config/examples/delta/kossel_pro/Configuration.h
  34. 15
    6
      Marlin/src/config/examples/delta/kossel_xl/Configuration.h
  35. 15
    6
      Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
  36. 15
    6
      Marlin/src/config/examples/makibox/Configuration.h
  37. 9
    6
      Marlin/src/config/examples/stm32f103ret6/Configuration.h
  38. 15
    6
      Marlin/src/config/examples/tvrrug/Round2/Configuration.h
  39. 15
    6
      Marlin/src/config/examples/wt150/Configuration.h
  40. 7
    10
      Marlin/src/feature/leds/leds.cpp
  41. 22
    8
      Marlin/src/feature/leds/leds.h
  42. 11
    10
      Marlin/src/feature/leds/neopixel.cpp
  43. 1
    1
      Marlin/src/feature/leds/neopixel.h
  44. 20
    17
      Marlin/src/gcode/feature/leds/M150.cpp
  45. 1
    1
      Marlin/src/gcode/gcode.h
  46. 7
    10
      Marlin/src/gcode/temperature/M104_M109.cpp
  47. 1
    5
      Marlin/src/gcode/temperature/M140_M190.cpp
  48. 1
    1
      Marlin/src/inc/Conditionals_LCD.h
  49. 6
    4
      Marlin/src/inc/SanityCheck.h

+ 15
- 6
Marlin/Configuration.h View File

1588 
  * Adds the M150 command to set the LED (or LED strip) color.
 1588 
  * Adds the M150 command to set the LED (or LED strip) color.
1589 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1589 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1590 
  * luminance values can be set from 0 to 255.
 1590 
  * luminance values can be set from 0 to 255.
1591 
+ * For Neopixel LED overall brightness parameters is also available
1591 
  *
 1592 
  *
1592 
  * *** CAUTION ***
 1593 
  * *** CAUTION ***
1593 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1594 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1594 
  *  as the Arduino cannot handle the current the LEDs will require.
 1595 
  *  as the Arduino cannot handle the current the LEDs will require.
1595 
  *  Failure to follow this precaution can destroy your Arduino!
 1596 
  *  Failure to follow this precaution can destroy your Arduino!
1597 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1598 
+ *  cannot handle the current, separate 5V power supply must be used
1596 
  * *** CAUTION ***
 1599 
  * *** CAUTION ***
1597 
  *
 1600 
  *
1601 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1602 
+ *
1598 
  */
 1603 
  */
1604 
+
1599 
 //#define RGB_LED
 1605 
 //#define RGB_LED
1600 
 //#define RGBW_LED
 1606 
 //#define RGBW_LED
1601 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1607 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1606 
 #endif
 1612 
 #endif
1607
1613
1608 
 // Support for Adafruit Neopixel LED driver
 1614 
 // Support for Adafruit Neopixel LED driver
1609 
-//#define NEOPIXEL_RGBW_LED
1610 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1611 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1612 
-  #define NEOPIXEL_PIXELS 3
1613 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1615 
+//#define NEOPIXEL_LED
1616 
+#if ENABLED(NEOPIXEL_LED)
1617 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1618 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1619 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1620 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1621 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1622 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1614 
 #endif
 1623 
 #endif
1615
1624
1616 
 /**
 1625 
 /**
1624 
  *  - Change to green once print has finished
 1633 
  *  - Change to green once print has finished
1625 
  *  - Turn off after the print has finished and the user has pushed a button
 1634 
  *  - Turn off after the print has finished and the user has pushed a button
1626 
  */
 1635 
  */
1627 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1636 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1628 
   #define PRINTER_EVENT_LEDS
 1637 
   #define PRINTER_EVENT_LEDS
1629 
 #endif
 1638 
 #endif
1630
1639

+ 1
- 1
Marlin/src/Marlin.cpp View File

796 
     OUT_WRITE(STAT_LED_BLUE_PIN, LOW); // turn it off
 796 
     OUT_WRITE(STAT_LED_BLUE_PIN, LOW); // turn it off
797 
   #endif
 797 
   #endif
798
798
799 
-  #if ENABLED(NEOPIXEL_RGBW_LED)
799 
+  #if ENABLED(NEOPIXEL_LED)
800 
     SET_OUTPUT(NEOPIXEL_PIN);
 800 
     SET_OUTPUT(NEOPIXEL_PIN);
801 
     setup_neopixel();
 801 
     setup_neopixel();
802 
   #endif
 802 
   #endif

+ 15
- 6
Marlin/src/config/default/Configuration.h View File

1588 
  * Adds the M150 command to set the LED (or LED strip) color.
 1588 
  * Adds the M150 command to set the LED (or LED strip) color.
1589 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1589 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1590 
  * luminance values can be set from 0 to 255.
 1590 
  * luminance values can be set from 0 to 255.
1591 
+ * For Neopixel LED overall brightness parameters is also available
1591 
  *
 1592 
  *
1592 
  * *** CAUTION ***
 1593 
  * *** CAUTION ***
1593 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1594 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1594 
  *  as the Arduino cannot handle the current the LEDs will require.
 1595 
  *  as the Arduino cannot handle the current the LEDs will require.
1595 
  *  Failure to follow this precaution can destroy your Arduino!
 1596 
  *  Failure to follow this precaution can destroy your Arduino!
1597 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1598 
+ *  cannot handle the current, separate 5V power supply must be used
1596 
  * *** CAUTION ***
 1599 
  * *** CAUTION ***
1597 
  *
 1600 
  *
1601 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1602 
+ *
1598 
  */
 1603 
  */
1604 
+
1599 
 //#define RGB_LED
 1605 
 //#define RGB_LED
1600 
 //#define RGBW_LED
 1606 
 //#define RGBW_LED
1601 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1607 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1606 
 #endif
 1612 
 #endif
1607
1613
1608 
 // Support for Adafruit Neopixel LED driver
 1614 
 // Support for Adafruit Neopixel LED driver
1609 
-//#define NEOPIXEL_RGBW_LED
1610 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1611 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1612 
-  #define NEOPIXEL_PIXELS 3
1613 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1615 
+//#define NEOPIXEL_LED
1616 
+#if ENABLED(NEOPIXEL_LED)
1617 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1618 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1619 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1620 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1621 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1622 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1614 
 #endif
 1623 
 #endif
1615
1624
1616 
 /**
 1625 
 /**
1624 
  *  - Change to green once print has finished
 1633 
  *  - Change to green once print has finished
1625 
  *  - Turn off after the print has finished and the user has pushed a button
 1634 
  *  - Turn off after the print has finished and the user has pushed a button
1626 
  */
 1635 
  */
1627 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1636 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1628 
   #define PRINTER_EVENT_LEDS
 1637 
   #define PRINTER_EVENT_LEDS
1629 
 #endif
 1638 
 #endif
1630
1639

+ 15
- 6
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h View File

1608 
  * Adds the M150 command to set the LED (or LED strip) color.
 1608 
  * Adds the M150 command to set the LED (or LED strip) color.
1609 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1609 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1610 
  * luminance values can be set from 0 to 255.
 1610 
  * luminance values can be set from 0 to 255.
1611 
+ * For Neopixel LED overall brightness parameters is also available
1611 
  *
 1612 
  *
1612 
  * *** CAUTION ***
 1613 
  * *** CAUTION ***
1613 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1614 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1614 
  *  as the Arduino cannot handle the current the LEDs will require.
 1615 
  *  as the Arduino cannot handle the current the LEDs will require.
1615 
  *  Failure to follow this precaution can destroy your Arduino!
 1616 
  *  Failure to follow this precaution can destroy your Arduino!
1617 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1618 
+ *  cannot handle the current, separate 5V power supply must be used
1616 
  * *** CAUTION ***
 1619 
  * *** CAUTION ***
1617 
  *
 1620 
  *
1621 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1622 
+ *
1618 
  */
 1623 
  */
1624 
+
1619 
 //#define RGB_LED
 1625 
 //#define RGB_LED
1620 
 //#define RGBW_LED
 1626 
 //#define RGBW_LED
1621 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1627 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1626 
 #endif
 1632 
 #endif
1627
1633
1628 
 // Support for Adafruit Neopixel LED driver
 1634 
 // Support for Adafruit Neopixel LED driver
1629 
-//#define NEOPIXEL_RGBW_LED
1630 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1631 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1632 
-  #define NEOPIXEL_PIXELS 3
1633 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1635 
+//#define NEOPIXEL_LED
1636 
+#if ENABLED(NEOPIXEL_LED)
1637 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1638 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1639 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1640 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1641 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1642 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1634 
 #endif
 1643 
 #endif
1635
1644
1636 
 /**
 1645 
 /**
1644 
  *  - Change to green once print has finished
 1653 
  *  - Change to green once print has finished
1645 
  *  - Turn off after the print has finished and the user has pushed a button
 1654 
  *  - Turn off after the print has finished and the user has pushed a button
1646 
  */
 1655 
  */
1647 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1656 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1648 
   #define PRINTER_EVENT_LEDS
 1657 
   #define PRINTER_EVENT_LEDS
1649 
 #endif
 1658 
 #endif
1650
1659

+ 15
- 6
Marlin/src/config/examples/AliExpress/CL-260/Configuration.h View File

1588 
  * Adds the M150 command to set the LED (or LED strip) color.
 1588 
  * Adds the M150 command to set the LED (or LED strip) color.
1589 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1589 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1590 
  * luminance values can be set from 0 to 255.
 1590 
  * luminance values can be set from 0 to 255.
1591 
+ * For Neopixel LED overall brightness parameters is also available
1591 
  *
 1592 
  *
1592 
  * *** CAUTION ***
 1593 
  * *** CAUTION ***
1593 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1594 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1594 
  *  as the Arduino cannot handle the current the LEDs will require.
 1595 
  *  as the Arduino cannot handle the current the LEDs will require.
1595 
  *  Failure to follow this precaution can destroy your Arduino!
 1596 
  *  Failure to follow this precaution can destroy your Arduino!
1597 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1598 
+ *  cannot handle the current, separate 5V power supply must be used
1596 
  * *** CAUTION ***
 1599 
  * *** CAUTION ***
1597 
  *
 1600 
  *
1601 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1602 
+ *
1598 
  */
 1603 
  */
1604 
+
1599 
 //#define RGB_LED
 1605 
 //#define RGB_LED
1600 
 //#define RGBW_LED
 1606 
 //#define RGBW_LED
1601 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1607 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1606 
 #endif
 1612 
 #endif
1607
1613
1608 
 // Support for Adafruit Neopixel LED driver
 1614 
 // Support for Adafruit Neopixel LED driver
1609 
-//#define NEOPIXEL_RGBW_LED
1610 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1611 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1612 
-  #define NEOPIXEL_PIXELS 3
1613 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1615 
+//#define NEOPIXEL_LED
1616 
+#if ENABLED(NEOPIXEL_LED)
1617 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1618 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1619 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1620 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1621 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1622 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1614 
 #endif
 1623 
 #endif
1615
1624
1616 
 /**
 1625 
 /**
1624 
  *  - Change to green once print has finished
 1633 
  *  - Change to green once print has finished
1625 
  *  - Turn off after the print has finished and the user has pushed a button
 1634 
  *  - Turn off after the print has finished and the user has pushed a button
1626 
  */
 1635 
  */
1627 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1636 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1628 
   #define PRINTER_EVENT_LEDS
 1637 
   #define PRINTER_EVENT_LEDS
1629 
 #endif
 1638 
 #endif
1630
1639

+ 15
- 6
Marlin/src/config/examples/Anet/A6/Configuration.h View File

1747 
  * Adds the M150 command to set the LED (or LED strip) color.
 1747 
  * Adds the M150 command to set the LED (or LED strip) color.
1748 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1748 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1749 
  * luminance values can be set from 0 to 255.
 1749 
  * luminance values can be set from 0 to 255.
1750 
+ * For Neopixel LED overall brightness parameters is also available
1750 
  *
 1751 
  *
1751 
  * *** CAUTION ***
 1752 
  * *** CAUTION ***
1752 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1753 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1753 
  *  as the Arduino cannot handle the current the LEDs will require.
 1754 
  *  as the Arduino cannot handle the current the LEDs will require.
1754 
  *  Failure to follow this precaution can destroy your Arduino!
 1755 
  *  Failure to follow this precaution can destroy your Arduino!
1756 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1757 
+ *  cannot handle the current, separate 5V power supply must be used
1755 
  * *** CAUTION ***
 1758 
  * *** CAUTION ***
1756 
  *
 1759 
  *
1760 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1761 
+ *
1757 
  */
 1762 
  */
1763 
+
1758 
 //#define RGB_LED
 1764 
 //#define RGB_LED
1759 
 //#define RGBW_LED
 1765 
 //#define RGBW_LED
1760 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1766 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1765 
 #endif
 1771 
 #endif
1766
1772
1767 
 // Support for Adafruit Neopixel LED driver
 1773 
 // Support for Adafruit Neopixel LED driver
1768 
-//#define NEOPIXEL_RGBW_LED
1769 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1770 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1771 
-  #define NEOPIXEL_PIXELS 3
1772 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1774 
+//#define NEOPIXEL_LED
1775 
+#if ENABLED(NEOPIXEL_LED)
1776 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1777 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1778 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1779 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1780 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1781 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1773 
 #endif
 1782 
 #endif
1774
1783
1775 
 /**
 1784 
 /**
1783 
  *  - Change to green once print has finished
 1792 
  *  - Change to green once print has finished
1784 
  *  - Turn off after the print has finished and the user has pushed a button
 1793 
  *  - Turn off after the print has finished and the user has pushed a button
1785 
  */
 1794 
  */
1786 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1795 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1787 
   #define PRINTER_EVENT_LEDS
 1796 
   #define PRINTER_EVENT_LEDS
1788 
 #endif
 1797 
 #endif
1789
1798

+ 15
- 6
Marlin/src/config/examples/Anet/A8/Configuration.h View File

1596 
  * Adds the M150 command to set the LED (or LED strip) color.
 1596 
  * Adds the M150 command to set the LED (or LED strip) color.
1597 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1597 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1598 
  * luminance values can be set from 0 to 255.
 1598 
  * luminance values can be set from 0 to 255.
1599 
+ * For Neopixel LED overall brightness parameters is also available
1599 
  *
 1600 
  *
1600 
  * *** CAUTION ***
 1601 
  * *** CAUTION ***
1601 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1602 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1602 
  *  as the Arduino cannot handle the current the LEDs will require.
 1603 
  *  as the Arduino cannot handle the current the LEDs will require.
1603 
  *  Failure to follow this precaution can destroy your Arduino!
 1604 
  *  Failure to follow this precaution can destroy your Arduino!
1605 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1606 
+ *  cannot handle the current, separate 5V power supply must be used
1604 
  * *** CAUTION ***
 1607 
  * *** CAUTION ***
1605 
  *
 1608 
  *
1609 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1610 
+ *
1606 
  */
 1611 
  */
1612 
+
1607 
 //#define RGB_LED
 1613 
 //#define RGB_LED
1608 
 //#define RGBW_LED
 1614 
 //#define RGBW_LED
1609 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1615 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1614 
 #endif
 1620 
 #endif
1615
1621
1616 
 // Support for Adafruit Neopixel LED driver
 1622 
 // Support for Adafruit Neopixel LED driver
1617 
-//#define NEOPIXEL_RGBW_LED
1618 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1619 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1620 
-  #define NEOPIXEL_PIXELS 3
1621 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1623 
+//#define NEOPIXEL_LED
1624 
+#if ENABLED(NEOPIXEL_LED)
1625 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1626 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1627 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1628 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1629 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1630 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1622 
 #endif
 1631 
 #endif
1623
1632
1624 
 /**
 1633 
 /**
1632 
  *  - Change to green once print has finished
 1641 
  *  - Change to green once print has finished
1633 
  *  - Turn off after the print has finished and the user has pushed a button
 1642 
  *  - Turn off after the print has finished and the user has pushed a button
1634 
  */
 1643 
  */
1635 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1644 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1636 
   #define PRINTER_EVENT_LEDS
 1645 
   #define PRINTER_EVENT_LEDS
1637 
 #endif
 1646 
 #endif
1638
1647

+ 15
- 6
Marlin/src/config/examples/BQ/Hephestos/Configuration.h View File

1579 
  * Adds the M150 command to set the LED (or LED strip) color.
 1579 
  * Adds the M150 command to set the LED (or LED strip) color.
1580 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1580 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1581 
  * luminance values can be set from 0 to 255.
 1581 
  * luminance values can be set from 0 to 255.
1582 
+ * For Neopixel LED overall brightness parameters is also available
1582 
  *
 1583 
  *
1583 
  * *** CAUTION ***
 1584 
  * *** CAUTION ***
1584 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1585 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1585 
  *  as the Arduino cannot handle the current the LEDs will require.
 1586 
  *  as the Arduino cannot handle the current the LEDs will require.
1586 
  *  Failure to follow this precaution can destroy your Arduino!
 1587 
  *  Failure to follow this precaution can destroy your Arduino!
1588 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1589 
+ *  cannot handle the current, separate 5V power supply must be used
1587 
  * *** CAUTION ***
 1590 
  * *** CAUTION ***
1588 
  *
 1591 
  *
1592 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1593 
+ *
1589 
  */
 1594 
  */
1595 
+
1590 
 //#define RGB_LED
 1596 
 //#define RGB_LED
1591 
 //#define RGBW_LED
 1597 
 //#define RGBW_LED
1592 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1598 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1597 
 #endif
 1603 
 #endif
1598
1604
1599 
 // Support for Adafruit Neopixel LED driver
 1605 
 // Support for Adafruit Neopixel LED driver
1600 
-//#define NEOPIXEL_RGBW_LED
1601 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1602 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1603 
-  #define NEOPIXEL_PIXELS 3
1604 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1606 
+//#define NEOPIXEL_LED
1607 
+#if ENABLED(NEOPIXEL_LED)
1608 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1609 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1610 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1611 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1612 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1613 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1605 
 #endif
 1614 
 #endif
1606
1615
1607 
 /**
 1616 
 /**
1615 
  *  - Change to green once print has finished
 1624 
  *  - Change to green once print has finished
1616 
  *  - Turn off after the print has finished and the user has pushed a button
 1625 
  *  - Turn off after the print has finished and the user has pushed a button
1617 
  */
 1626 
  */
1618 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1627 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1619 
   #define PRINTER_EVENT_LEDS
 1628 
   #define PRINTER_EVENT_LEDS
1620 
 #endif
 1629 
 #endif
1621
1630

+ 15
- 6
Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h View File

1589 
  * Adds the M150 command to set the LED (or LED strip) color.
 1589 
  * Adds the M150 command to set the LED (or LED strip) color.
1590 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1590 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1591 
  * luminance values can be set from 0 to 255.
 1591 
  * luminance values can be set from 0 to 255.
1592 
+ * For Neopixel LED overall brightness parameters is also available
1592 
  *
 1593 
  *
1593 
  * *** CAUTION ***
 1594 
  * *** CAUTION ***
1594 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1595 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1595 
  *  as the Arduino cannot handle the current the LEDs will require.
 1596 
  *  as the Arduino cannot handle the current the LEDs will require.
1596 
  *  Failure to follow this precaution can destroy your Arduino!
 1597 
  *  Failure to follow this precaution can destroy your Arduino!
1598 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1599 
+ *  cannot handle the current, separate 5V power supply must be used
1597 
  * *** CAUTION ***
 1600 
  * *** CAUTION ***
1598 
  *
 1601 
  *
1602 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1603 
+ *
1599 
  */
 1604 
  */
1605 
+
1600 
 //#define RGB_LED
 1606 
 //#define RGB_LED
1601 
 //#define RGBW_LED
 1607 
 //#define RGBW_LED
1602 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1608 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1607 
 #endif
 1613 
 #endif
1608
1614
1609 
 // Support for Adafruit Neopixel LED driver
 1615 
 // Support for Adafruit Neopixel LED driver
1610 
-//#define NEOPIXEL_RGBW_LED
1611 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1612 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1613 
-  #define NEOPIXEL_PIXELS 3
1614 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1616 
+//#define NEOPIXEL_LED
1617 
+#if ENABLED(NEOPIXEL_LED)
1618 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1619 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1620 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1621 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1622 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1623 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1615 
 #endif
 1624 
 #endif
1616
1625
1617 
 /**
 1626 
 /**
1625 
  *  - Change to green once print has finished
 1634 
  *  - Change to green once print has finished
1626 
  *  - Turn off after the print has finished and the user has pushed a button
 1635 
  *  - Turn off after the print has finished and the user has pushed a button
1627 
  */
 1636 
  */
1628 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1637 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1629 
   #define PRINTER_EVENT_LEDS
 1638 
   #define PRINTER_EVENT_LEDS
1630 
 #endif
 1639 
 #endif
1631
1640

+ 15
- 6
Marlin/src/config/examples/BQ/WITBOX/Configuration.h View File

1579 
  * Adds the M150 command to set the LED (or LED strip) color.
 1579 
  * Adds the M150 command to set the LED (or LED strip) color.
1580 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1580 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1581 
  * luminance values can be set from 0 to 255.
 1581 
  * luminance values can be set from 0 to 255.
1582 
+ * For Neopixel LED overall brightness parameters is also available
1582 
  *
 1583 
  *
1583 
  * *** CAUTION ***
 1584 
  * *** CAUTION ***
1584 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1585 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1585 
  *  as the Arduino cannot handle the current the LEDs will require.
 1586 
  *  as the Arduino cannot handle the current the LEDs will require.
1586 
  *  Failure to follow this precaution can destroy your Arduino!
 1587 
  *  Failure to follow this precaution can destroy your Arduino!
1588 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1589 
+ *  cannot handle the current, separate 5V power supply must be used
1587 
  * *** CAUTION ***
 1590 
  * *** CAUTION ***
1588 
  *
 1591 
  *
1592 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1593 
+ *
1589 
  */
 1594 
  */
1595 
+
1590 
 //#define RGB_LED
 1596 
 //#define RGB_LED
1591 
 //#define RGBW_LED
 1597 
 //#define RGBW_LED
1592 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1598 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1597 
 #endif
 1603 
 #endif
1598
1604
1599 
 // Support for Adafruit Neopixel LED driver
 1605 
 // Support for Adafruit Neopixel LED driver
1600 
-//#define NEOPIXEL_RGBW_LED
1601 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1602 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1603 
-  #define NEOPIXEL_PIXELS 3
1604 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1606 
+//#define NEOPIXEL_LED
1607 
+#if ENABLED(NEOPIXEL_LED)
1608 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1609 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1610 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1611 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1612 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1613 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1605 
 #endif
 1614 
 #endif
1606
1615
1607 
 /**
 1616 
 /**
1615 
  *  - Change to green once print has finished
 1624 
  *  - Change to green once print has finished
1616 
  *  - Turn off after the print has finished and the user has pushed a button
 1625 
  *  - Turn off after the print has finished and the user has pushed a button
1617 
  */
 1626 
  */
1618 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1627 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1619 
   #define PRINTER_EVENT_LEDS
 1628 
   #define PRINTER_EVENT_LEDS
1620 
 #endif
 1629 
 #endif
1621
1630

+ 15
- 6
Marlin/src/config/examples/Cartesio/Configuration.h View File

1587 
  * Adds the M150 command to set the LED (or LED strip) color.
 1587 
  * Adds the M150 command to set the LED (or LED strip) color.
1588 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1588 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1589 
  * luminance values can be set from 0 to 255.
 1589 
  * luminance values can be set from 0 to 255.
1590 
+ * For Neopixel LED overall brightness parameters is also available
1590 
  *
 1591 
  *
1591 
  * *** CAUTION ***
 1592 
  * *** CAUTION ***
1592 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1593 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1593 
  *  as the Arduino cannot handle the current the LEDs will require.
 1594 
  *  as the Arduino cannot handle the current the LEDs will require.
1594 
  *  Failure to follow this precaution can destroy your Arduino!
 1595 
  *  Failure to follow this precaution can destroy your Arduino!
1596 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1597 
+ *  cannot handle the current, separate 5V power supply must be used
1595 
  * *** CAUTION ***
 1598 
  * *** CAUTION ***
1596 
  *
 1599 
  *
1600 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1601 
+ *
1597 
  */
 1602 
  */
1603 
+
1598 
 //#define RGB_LED
 1604 
 //#define RGB_LED
1599 
 //#define RGBW_LED
 1605 
 //#define RGBW_LED
1600 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1606 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1605 
 #endif
 1611 
 #endif
1606
1612
1607 
 // Support for Adafruit Neopixel LED driver
 1613 
 // Support for Adafruit Neopixel LED driver
1608 
-//#define NEOPIXEL_RGBW_LED
1609 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1610 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1611 
-  #define NEOPIXEL_PIXELS 3
1612 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1614 
+//#define NEOPIXEL_LED
1615 
+#if ENABLED(NEOPIXEL_LED)
1616 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1617 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1618 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1619 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1620 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1621 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1613 
 #endif
 1622 
 #endif
1614
1623
1615 
 /**
 1624 
 /**
1623 
  *  - Change to green once print has finished
 1632 
  *  - Change to green once print has finished
1624 
  *  - Turn off after the print has finished and the user has pushed a button
 1633 
  *  - Turn off after the print has finished and the user has pushed a button
1625 
  */
 1634 
  */
1626 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1635 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1627 
   #define PRINTER_EVENT_LEDS
 1636 
   #define PRINTER_EVENT_LEDS
1628 
 #endif
 1637 
 #endif
1629
1638

+ 15
- 6
Marlin/src/config/examples/Creality/CR-10/Configuration.h View File

1598 
  * Adds the M150 command to set the LED (or LED strip) color.
 1598 
  * Adds the M150 command to set the LED (or LED strip) color.
1599 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1599 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1600 
  * luminance values can be set from 0 to 255.
 1600 
  * luminance values can be set from 0 to 255.
1601 
+ * For Neopixel LED overall brightness parameters is also available
1601 
  *
 1602 
  *
1602 
  * *** CAUTION ***
 1603 
  * *** CAUTION ***
1603 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1604 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1604 
  *  as the Arduino cannot handle the current the LEDs will require.
 1605 
  *  as the Arduino cannot handle the current the LEDs will require.
1605 
  *  Failure to follow this precaution can destroy your Arduino!
 1606 
  *  Failure to follow this precaution can destroy your Arduino!
1607 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1608 
+ *  cannot handle the current, separate 5V power supply must be used
1606 
  * *** CAUTION ***
 1609 
  * *** CAUTION ***
1607 
  *
 1610 
  *
1611 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1612 
+ *
1608 
  */
 1613 
  */
1614 
+
1609 
 //#define RGB_LED
 1615 
 //#define RGB_LED
1610 
 //#define RGBW_LED
 1616 
 //#define RGBW_LED
1611 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1617 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1616 
 #endif
 1622 
 #endif
1617
1623
1618 
 // Support for Adafruit Neopixel LED driver
 1624 
 // Support for Adafruit Neopixel LED driver
1619 
-//#define NEOPIXEL_RGBW_LED
1620 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1621 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1622 
-  #define NEOPIXEL_PIXELS 3
1623 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1625 
+//#define NEOPIXEL_LED
1626 
+#if ENABLED(NEOPIXEL_LED)
1627 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1628 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1629 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1630 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1631 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1632 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1624 
 #endif
 1633 
 #endif
1625
1634
1626 
 /**
 1635 
 /**
1634 
  *  - Change to green once print has finished
 1643 
  *  - Change to green once print has finished
1635 
  *  - Turn off after the print has finished and the user has pushed a button
 1644 
  *  - Turn off after the print has finished and the user has pushed a button
1636 
  */
 1645 
  */
1637 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1646 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1638 
   #define PRINTER_EVENT_LEDS
 1647 
   #define PRINTER_EVENT_LEDS
1639 
 #endif
 1648 
 #endif
1640
1649

+ 15
- 6
Marlin/src/config/examples/Felix/Configuration.h View File

1570 
  * Adds the M150 command to set the LED (or LED strip) color.
 1570 
  * Adds the M150 command to set the LED (or LED strip) color.
1571 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1571 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1572 
  * luminance values can be set from 0 to 255.
 1572 
  * luminance values can be set from 0 to 255.
1573 
+ * For Neopixel LED overall brightness parameters is also available
1573 
  *
 1574 
  *
1574 
  * *** CAUTION ***
 1575 
  * *** CAUTION ***
1575 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1576 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1576 
  *  as the Arduino cannot handle the current the LEDs will require.
 1577 
  *  as the Arduino cannot handle the current the LEDs will require.
1577 
  *  Failure to follow this precaution can destroy your Arduino!
 1578 
  *  Failure to follow this precaution can destroy your Arduino!
1579 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1580 
+ *  cannot handle the current, separate 5V power supply must be used
1578 
  * *** CAUTION ***
 1581 
  * *** CAUTION ***
1579 
  *
 1582 
  *
1583 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1584 
+ *
1580 
  */
 1585 
  */
1586 
+
1581 
 //#define RGB_LED
 1587 
 //#define RGB_LED
1582 
 //#define RGBW_LED
 1588 
 //#define RGBW_LED
1583 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1589 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1588 
 #endif
 1594 
 #endif
1589
1595
1590 
 // Support for Adafruit Neopixel LED driver
 1596 
 // Support for Adafruit Neopixel LED driver
1591 
-//#define NEOPIXEL_RGBW_LED
1592 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1593 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1594 
-  #define NEOPIXEL_PIXELS 3
1595 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1597 
+//#define NEOPIXEL_LED
1598 
+#if ENABLED(NEOPIXEL_LED)
1599 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1600 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1601 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1602 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1603 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1604 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1596 
 #endif
 1605 
 #endif
1597
1606
1598 
 /**
 1607 
 /**
1606 
  *  - Change to green once print has finished
 1615 
  *  - Change to green once print has finished
1607 
  *  - Turn off after the print has finished and the user has pushed a button
 1616 
  *  - Turn off after the print has finished and the user has pushed a button
1608 
  */
 1617 
  */
1609 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1618 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1610 
   #define PRINTER_EVENT_LEDS
 1619 
   #define PRINTER_EVENT_LEDS
1611 
 #endif
 1620 
 #endif
1612
1621

+ 15
- 6
Marlin/src/config/examples/Felix/DUAL/Configuration.h View File

1570 
  * Adds the M150 command to set the LED (or LED strip) color.
 1570 
  * Adds the M150 command to set the LED (or LED strip) color.
1571 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1571 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1572 
  * luminance values can be set from 0 to 255.
 1572 
  * luminance values can be set from 0 to 255.
1573 
+ * For Neopixel LED overall brightness parameters is also available
1573 
  *
 1574 
  *
1574 
  * *** CAUTION ***
 1575 
  * *** CAUTION ***
1575 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1576 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1576 
  *  as the Arduino cannot handle the current the LEDs will require.
 1577 
  *  as the Arduino cannot handle the current the LEDs will require.
1577 
  *  Failure to follow this precaution can destroy your Arduino!
 1578 
  *  Failure to follow this precaution can destroy your Arduino!
1579 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1580 
+ *  cannot handle the current, separate 5V power supply must be used
1578 
  * *** CAUTION ***
 1581 
  * *** CAUTION ***
1579 
  *
 1582 
  *
1583 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1584 
+ *
1580 
  */
 1585 
  */
1586 
+
1581 
 //#define RGB_LED
 1587 
 //#define RGB_LED
1582 
 //#define RGBW_LED
 1588 
 //#define RGBW_LED
1583 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1589 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1588 
 #endif
 1594 
 #endif
1589
1595
1590 
 // Support for Adafruit Neopixel LED driver
 1596 
 // Support for Adafruit Neopixel LED driver
1591 
-//#define NEOPIXEL_RGBW_LED
1592 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1593 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1594 
-  #define NEOPIXEL_PIXELS 3
1595 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1597 
+//#define NEOPIXEL_LED
1598 
+#if ENABLED(NEOPIXEL_LED)
1599 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1600 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1601 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1602 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1603 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1604 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1596 
 #endif
 1605 
 #endif
1597
1606
1598 
 /**
 1607 
 /**
1606 
  *  - Change to green once print has finished
 1615 
  *  - Change to green once print has finished
1607 
  *  - Turn off after the print has finished and the user has pushed a button
 1616 
  *  - Turn off after the print has finished and the user has pushed a button
1608 
  */
 1617 
  */
1609 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1618 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1610 
   #define PRINTER_EVENT_LEDS
 1619 
   #define PRINTER_EVENT_LEDS
1611 
 #endif
 1620 
 #endif
1612
1621

+ 15
- 6
Marlin/src/config/examples/Folger Tech/i3-2020/Configuration.h View File

1593 
  * Adds the M150 command to set the LED (or LED strip) color.
 1593 
  * Adds the M150 command to set the LED (or LED strip) color.
1594 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1594 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1595 
  * luminance values can be set from 0 to 255.
 1595 
  * luminance values can be set from 0 to 255.
1596 
+ * For Neopixel LED overall brightness parameters is also available
1596 
  *
 1597 
  *
1597 
  * *** CAUTION ***
 1598 
  * *** CAUTION ***
1598 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1599 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1599 
  *  as the Arduino cannot handle the current the LEDs will require.
 1600 
  *  as the Arduino cannot handle the current the LEDs will require.
1600 
  *  Failure to follow this precaution can destroy your Arduino!
 1601 
  *  Failure to follow this precaution can destroy your Arduino!
1602 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1603 
+ *  cannot handle the current, separate 5V power supply must be used
1601 
  * *** CAUTION ***
 1604 
  * *** CAUTION ***
1602 
  *
 1605 
  *
1606 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1607 
+ *
1603 
  */
 1608 
  */
1609 
+
1604 
 //#define RGB_LED
 1610 
 //#define RGB_LED
1605 
 //#define RGBW_LED
 1611 
 //#define RGBW_LED
1606 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1612 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1611 
 #endif
 1617 
 #endif
1612
1618
1613 
 // Support for Adafruit Neopixel LED driver
 1619 
 // Support for Adafruit Neopixel LED driver
1614 
-//#define NEOPIXEL_RGBW_LED
1615 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1616 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1617 
-  #define NEOPIXEL_PIXELS 3
1618 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1620 
+//#define NEOPIXEL_LED
1621 
+#if ENABLED(NEOPIXEL_LED)
1622 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1623 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1624 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1625 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1626 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1627 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1619 
 #endif
 1628 
 #endif
1620
1629
1621 
 /**
 1630 
 /**
1629 
  *  - Change to green once print has finished
 1638 
  *  - Change to green once print has finished
1630 
  *  - Turn off after the print has finished and the user has pushed a button
 1639 
  *  - Turn off after the print has finished and the user has pushed a button
1631 
  */
 1640 
  */
1632 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1641 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1633 
   #define PRINTER_EVENT_LEDS
 1642 
   #define PRINTER_EVENT_LEDS
1634 
 #endif
 1643 
 #endif
1635
1644

+ 15
- 6
Marlin/src/config/examples/Geeetech/GT2560/Configuration.h View File

1603 
  * Adds the M150 command to set the LED (or LED strip) color.
 1603 
  * Adds the M150 command to set the LED (or LED strip) color.
1604 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1604 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1605 
  * luminance values can be set from 0 to 255.
 1605 
  * luminance values can be set from 0 to 255.
1606 
+ * For Neopixel LED overall brightness parameters is also available
1606 
  *
 1607 
  *
1607 
  * *** CAUTION ***
 1608 
  * *** CAUTION ***
1608 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1609 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1609 
  *  as the Arduino cannot handle the current the LEDs will require.
 1610 
  *  as the Arduino cannot handle the current the LEDs will require.
1610 
  *  Failure to follow this precaution can destroy your Arduino!
 1611 
  *  Failure to follow this precaution can destroy your Arduino!
1612 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1613 
+ *  cannot handle the current, separate 5V power supply must be used
1611 
  * *** CAUTION ***
 1614 
  * *** CAUTION ***
1612 
  *
 1615 
  *
1616 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1617 
+ *
1613 
  */
 1618 
  */
1619 
+
1614 
 //#define RGB_LED
 1620 
 //#define RGB_LED
1615 
 //#define RGBW_LED
 1621 
 //#define RGBW_LED
1616 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1622 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1621 
 #endif
 1627 
 #endif
1622
1628
1623 
 // Support for Adafruit Neopixel LED driver
 1629 
 // Support for Adafruit Neopixel LED driver
1624 
-//#define NEOPIXEL_RGBW_LED
1625 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1626 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1627 
-  #define NEOPIXEL_PIXELS 3
1628 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1630 
+//#define NEOPIXEL_LED
1631 
+#if ENABLED(NEOPIXEL_LED)
1632 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1633 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1634 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1635 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1636 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1637 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1629 
 #endif
 1638 
 #endif
1630
1639
1631 
 /**
 1640 
 /**
1639 
  *  - Change to green once print has finished
 1648 
  *  - Change to green once print has finished
1640 
  *  - Turn off after the print has finished and the user has pushed a button
 1649 
  *  - Turn off after the print has finished and the user has pushed a button
1641 
  */
 1650 
  */
1642 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1651 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1643 
   #define PRINTER_EVENT_LEDS
 1652 
   #define PRINTER_EVENT_LEDS
1644 
 #endif
 1653 
 #endif
1645
1654

+ 15
- 6
Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h View File

1588 
  * Adds the M150 command to set the LED (or LED strip) color.
 1588 
  * Adds the M150 command to set the LED (or LED strip) color.
1589 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1589 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1590 
  * luminance values can be set from 0 to 255.
 1590 
  * luminance values can be set from 0 to 255.
1591 
+ * For Neopixel LED overall brightness parameters is also available
1591 
  *
 1592 
  *
1592 
  * *** CAUTION ***
 1593 
  * *** CAUTION ***
1593 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1594 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1594 
  *  as the Arduino cannot handle the current the LEDs will require.
 1595 
  *  as the Arduino cannot handle the current the LEDs will require.
1595 
  *  Failure to follow this precaution can destroy your Arduino!
 1596 
  *  Failure to follow this precaution can destroy your Arduino!
1597 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1598 
+ *  cannot handle the current, separate 5V power supply must be used
1596 
  * *** CAUTION ***
 1599 
  * *** CAUTION ***
1597 
  *
 1600 
  *
1601 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1602 
+ *
1598 
  */
 1603 
  */
1604 
+
1599 
 //#define RGB_LED
 1605 
 //#define RGB_LED
1600 
 //#define RGBW_LED
 1606 
 //#define RGBW_LED
1601 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1607 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1606 
 #endif
 1612 
 #endif
1607
1613
1608 
 // Support for Adafruit Neopixel LED driver
 1614 
 // Support for Adafruit Neopixel LED driver
1609 
-//#define NEOPIXEL_RGBW_LED
1610 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1611 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1612 
-  #define NEOPIXEL_PIXELS 3
1613 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1615 
+//#define NEOPIXEL_LED
1616 
+#if ENABLED(NEOPIXEL_LED)
1617 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1618 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1619 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1620 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1621 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1622 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1614 
 #endif
 1623 
 #endif
1615
1624
1616 
 /**
 1625 
 /**
1624 
  *  - Change to green once print has finished
 1633 
  *  - Change to green once print has finished
1625 
  *  - Turn off after the print has finished and the user has pushed a button
 1634 
  *  - Turn off after the print has finished and the user has pushed a button
1626 
  */
 1635 
  */
1627 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1636 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1628 
   #define PRINTER_EVENT_LEDS
 1637 
   #define PRINTER_EVENT_LEDS
1629 
 #endif
 1638 
 #endif
1630
1639

+ 15
- 6
Marlin/src/config/examples/Infitary/i3-M508/Configuration.h View File

1592 
  * Adds the M150 command to set the LED (or LED strip) color.
 1592 
  * Adds the M150 command to set the LED (or LED strip) color.
1593 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1593 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1594 
  * luminance values can be set from 0 to 255.
 1594 
  * luminance values can be set from 0 to 255.
1595 
+ * For Neopixel LED overall brightness parameters is also available
1595 
  *
 1596 
  *
1596 
  * *** CAUTION ***
 1597 
  * *** CAUTION ***
1597 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1598 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1598 
  *  as the Arduino cannot handle the current the LEDs will require.
 1599 
  *  as the Arduino cannot handle the current the LEDs will require.
1599 
  *  Failure to follow this precaution can destroy your Arduino!
 1600 
  *  Failure to follow this precaution can destroy your Arduino!
1601 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1602 
+ *  cannot handle the current, separate 5V power supply must be used
1600 
  * *** CAUTION ***
 1603 
  * *** CAUTION ***
1601 
  *
 1604 
  *
1605 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1606 
+ *
1602 
  */
 1607 
  */
1608 
+
1603 
 //#define RGB_LED
 1609 
 //#define RGB_LED
1604 
 //#define RGBW_LED
 1610 
 //#define RGBW_LED
1605 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1611 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1610 
 #endif
 1616 
 #endif
1611
1617
1612 
 // Support for Adafruit Neopixel LED driver
 1618 
 // Support for Adafruit Neopixel LED driver
1613 
-//#define NEOPIXEL_RGBW_LED
1614 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1615 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1616 
-  #define NEOPIXEL_PIXELS 3
1617 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1619 
+//#define NEOPIXEL_LED
1620 
+#if ENABLED(NEOPIXEL_LED)
1621 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1622 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1623 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1624 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1625 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1626 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1618 
 #endif
 1627 
 #endif
1619
1628
1620 
 /**
 1629 
 /**
1628 
  *  - Change to green once print has finished
 1637 
  *  - Change to green once print has finished
1629 
  *  - Turn off after the print has finished and the user has pushed a button
 1638 
  *  - Turn off after the print has finished and the user has pushed a button
1630 
  */
 1639 
  */
1631 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1640 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1632 
   #define PRINTER_EVENT_LEDS
 1641 
   #define PRINTER_EVENT_LEDS
1633 
 #endif
 1642 
 #endif
1634
1643

+ 15
- 6
Marlin/src/config/examples/Malyan/M150/Configuration.h View File

1616 
  * Adds the M150 command to set the LED (or LED strip) color.
 1616 
  * Adds the M150 command to set the LED (or LED strip) color.
1617 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1617 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1618 
  * luminance values can be set from 0 to 255.
 1618 
  * luminance values can be set from 0 to 255.
1619 
+ * For Neopixel LED overall brightness parameters is also available
1619 
  *
 1620 
  *
1620 
  * *** CAUTION ***
 1621 
  * *** CAUTION ***
1621 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1622 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1622 
  *  as the Arduino cannot handle the current the LEDs will require.
 1623 
  *  as the Arduino cannot handle the current the LEDs will require.
1623 
  *  Failure to follow this precaution can destroy your Arduino!
 1624 
  *  Failure to follow this precaution can destroy your Arduino!
1625 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1626 
+ *  cannot handle the current, separate 5V power supply must be used
1624 
  * *** CAUTION ***
 1627 
  * *** CAUTION ***
1625 
  *
 1628 
  *
1629 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1630 
+ *
1626 
  */
 1631 
  */
1632 
+
1627 
 //#define RGB_LED
 1633 
 //#define RGB_LED
1628 
 //#define RGBW_LED
 1634 
 //#define RGBW_LED
1629 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1635 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1634 
 #endif
 1640 
 #endif
1635
1641
1636 
 // Support for Adafruit Neopixel LED driver
 1642 
 // Support for Adafruit Neopixel LED driver
1637 
-//#define NEOPIXEL_RGBW_LED
1638 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1639 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1640 
-  #define NEOPIXEL_PIXELS 3
1641 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1643 
+//#define NEOPIXEL_LED
1644 
+#if ENABLED(NEOPIXEL_LED)
1645 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1646 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1647 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1648 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1649 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1650 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1642 
 #endif
 1651 
 #endif
1643
1652
1644 
 /**
 1653 
 /**
1652 
  *  - Change to green once print has finished
 1661 
  *  - Change to green once print has finished
1653 
  *  - Turn off after the print has finished and the user has pushed a button
 1662 
  *  - Turn off after the print has finished and the user has pushed a button
1654 
  */
 1663 
  */
1655 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1664 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1656 
   #define PRINTER_EVENT_LEDS
 1665 
   #define PRINTER_EVENT_LEDS
1657 
 #endif
 1666 
 #endif
1658
1667

+ 15
- 6
Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h View File

1588 
  * Adds the M150 command to set the LED (or LED strip) color.
 1588 
  * Adds the M150 command to set the LED (or LED strip) color.
1589 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1589 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1590 
  * luminance values can be set from 0 to 255.
 1590 
  * luminance values can be set from 0 to 255.
1591 
+ * For Neopixel LED overall brightness parameters is also available
1591 
  *
 1592 
  *
1592 
  * *** CAUTION ***
 1593 
  * *** CAUTION ***
1593 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1594 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1594 
  *  as the Arduino cannot handle the current the LEDs will require.
 1595 
  *  as the Arduino cannot handle the current the LEDs will require.
1595 
  *  Failure to follow this precaution can destroy your Arduino!
 1596 
  *  Failure to follow this precaution can destroy your Arduino!
1597 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1598 
+ *  cannot handle the current, separate 5V power supply must be used
1596 
  * *** CAUTION ***
 1599 
  * *** CAUTION ***
1597 
  *
 1600 
  *
1601 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1602 
+ *
1598 
  */
 1603 
  */
1604 
+
1599 
 //#define RGB_LED
 1605 
 //#define RGB_LED
1600 
 //#define RGBW_LED
 1606 
 //#define RGBW_LED
1601 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1607 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1606 
 #endif
 1612 
 #endif
1607
1613
1608 
 // Support for Adafruit Neopixel LED driver
 1614 
 // Support for Adafruit Neopixel LED driver
1609 
-//#define NEOPIXEL_RGBW_LED
1610 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1611 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1612 
-  #define NEOPIXEL_PIXELS 3
1613 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1615 
+//#define NEOPIXEL_LED
1616 
+#if ENABLED(NEOPIXEL_LED)
1617 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1618 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1619 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1620 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1621 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1622 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1614 
 #endif
 1623 
 #endif
1615
1624
1616 
 /**
 1625 
 /**
1624 
  *  - Change to green once print has finished
 1633 
  *  - Change to green once print has finished
1625 
  *  - Turn off after the print has finished and the user has pushed a button
 1634 
  *  - Turn off after the print has finished and the user has pushed a button
1626 
  */
 1635 
  */
1627 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1636 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1628 
   #define PRINTER_EVENT_LEDS
 1637 
   #define PRINTER_EVENT_LEDS
1629 
 #endif
 1638 
 #endif
1630
1639

+ 15
- 6
Marlin/src/config/examples/RigidBot/Configuration.h View File

1588 
  * Adds the M150 command to set the LED (or LED strip) color.
 1588 
  * Adds the M150 command to set the LED (or LED strip) color.
1589 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1589 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1590 
  * luminance values can be set from 0 to 255.
 1590 
  * luminance values can be set from 0 to 255.
1591 
+ * For Neopixel LED overall brightness parameters is also available
1591 
  *
 1592 
  *
1592 
  * *** CAUTION ***
 1593 
  * *** CAUTION ***
1593 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1594 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1594 
  *  as the Arduino cannot handle the current the LEDs will require.
 1595 
  *  as the Arduino cannot handle the current the LEDs will require.
1595 
  *  Failure to follow this precaution can destroy your Arduino!
 1596 
  *  Failure to follow this precaution can destroy your Arduino!
1597 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1598 
+ *  cannot handle the current, separate 5V power supply must be used
1596 
  * *** CAUTION ***
 1599 
  * *** CAUTION ***
1597 
  *
 1600 
  *
1601 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1602 
+ *
1598 
  */
 1603 
  */
1604 
+
1599 
 //#define RGB_LED
 1605 
 //#define RGB_LED
1600 
 //#define RGBW_LED
 1606 
 //#define RGBW_LED
1601 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1607 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1606 
 #endif
 1612 
 #endif
1607
1613
1608 
 // Support for Adafruit Neopixel LED driver
 1614 
 // Support for Adafruit Neopixel LED driver
1609 
-//#define NEOPIXEL_RGBW_LED
1610 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1611 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1612 
-  #define NEOPIXEL_PIXELS 3
1613 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1615 
+//#define NEOPIXEL_LED
1616 
+#if ENABLED(NEOPIXEL_LED)
1617 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1618 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1619 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1620 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1621 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1622 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1614 
 #endif
 1623 
 #endif
1615
1624
1616 
 /**
 1625 
 /**
1624 
  *  - Change to green once print has finished
 1633 
  *  - Change to green once print has finished
1625 
  *  - Turn off after the print has finished and the user has pushed a button
 1634 
  *  - Turn off after the print has finished and the user has pushed a button
1626 
  */
 1635 
  */
1627 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1636 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1628 
   #define PRINTER_EVENT_LEDS
 1637 
   #define PRINTER_EVENT_LEDS
1629 
 #endif
 1638 
 #endif
1630
1639

+ 15
- 6
Marlin/src/config/examples/SCARA/Configuration.h View File

1600 
  * Adds the M150 command to set the LED (or LED strip) color.
 1600 
  * Adds the M150 command to set the LED (or LED strip) color.
1601 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1601 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1602 
  * luminance values can be set from 0 to 255.
 1602 
  * luminance values can be set from 0 to 255.
1603 
+ * For Neopixel LED overall brightness parameters is also available
1603 
  *
 1604 
  *
1604 
  * *** CAUTION ***
 1605 
  * *** CAUTION ***
1605 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1606 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1606 
  *  as the Arduino cannot handle the current the LEDs will require.
 1607 
  *  as the Arduino cannot handle the current the LEDs will require.
1607 
  *  Failure to follow this precaution can destroy your Arduino!
 1608 
  *  Failure to follow this precaution can destroy your Arduino!
1609 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1610 
+ *  cannot handle the current, separate 5V power supply must be used
1608 
  * *** CAUTION ***
 1611 
  * *** CAUTION ***
1609 
  *
 1612 
  *
1613 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1614 
+ *
1610 
  */
 1615 
  */
1616 
+
1611 
 //#define RGB_LED
 1617 
 //#define RGB_LED
1612 
 //#define RGBW_LED
 1618 
 //#define RGBW_LED
1613 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1619 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1618 
 #endif
 1624 
 #endif
1619
1625
1620 
 // Support for Adafruit Neopixel LED driver
 1626 
 // Support for Adafruit Neopixel LED driver
1621 
-//#define NEOPIXEL_RGBW_LED
1622 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1623 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1624 
-  #define NEOPIXEL_PIXELS 3
1625 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1627 
+//#define NEOPIXEL_LED
1628 
+#if ENABLED(NEOPIXEL_LED)
1629 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1630 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1631 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1632 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1633 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1634 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1626 
 #endif
 1635 
 #endif
1627
1636
1628 
 /**
 1637 
 /**
1636 
  *  - Change to green once print has finished
 1645 
  *  - Change to green once print has finished
1637 
  *  - Turn off after the print has finished and the user has pushed a button
 1646 
  *  - Turn off after the print has finished and the user has pushed a button
1638 
  */
 1647 
  */
1639 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1648 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1640 
   #define PRINTER_EVENT_LEDS
 1649 
   #define PRINTER_EVENT_LEDS
1641 
 #endif
 1650 
 #endif
1642
1651

+ 19
- 10
Marlin/src/config/examples/Sanguinololu/Configuration.h View File

1619 
  * Adds the M150 command to set the LED (or LED strip) color.
 1619 
  * Adds the M150 command to set the LED (or LED strip) color.
1620 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1620 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1621 
  * luminance values can be set from 0 to 255.
 1621 
  * luminance values can be set from 0 to 255.
1622 
+ * For Neopixel LED overall brightness parameters is also available
1622 
  *
 1623 
  *
1623 
  * *** CAUTION ***
 1624 
  * *** CAUTION ***
1624 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1625 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1625 
  *  as the Arduino cannot handle the current the LEDs will require.
 1626 
  *  as the Arduino cannot handle the current the LEDs will require.
1626 
  *  Failure to follow this precaution can destroy your Arduino!
 1627 
  *  Failure to follow this precaution can destroy your Arduino!
1628 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1629 
+ *  cannot handle the current, separate 5V power supply must be used
1627 
  * *** CAUTION ***
 1630 
  * *** CAUTION ***
1628 
  *
 1631 
  *
1632 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1633 
+ *
1629 
  */
 1634 
  */
1630 
-#define RGB_LED
1635 
+
1636 
+//#define RGB_LED
1631 
 //#define RGBW_LED
 1637 
 //#define RGBW_LED
1632 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1638 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1633 
-  #define RGB_LED_R_PIN 11
1634 
-  #define RGB_LED_G_PIN 10
1635 
-  #define RGB_LED_B_PIN 17
1639 
+  #define RGB_LED_R_PIN 34
1640 
+  #define RGB_LED_G_PIN 43
1641 
+  #define RGB_LED_B_PIN 35
1636 
   #define RGB_LED_W_PIN -1
 1642 
   #define RGB_LED_W_PIN -1
1637 
 #endif
 1643 
 #endif
1638
1644
1639 
 // Support for Adafruit Neopixel LED driver
 1645 
 // Support for Adafruit Neopixel LED driver
1640 
-//#define NEOPIXEL_RGBW_LED
1641 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1642 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1643 
-  #define NEOPIXEL_PIXELS 3
1644 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1646 
+//#define NEOPIXEL_LED
1647 
+#if ENABLED(NEOPIXEL_LED)
1648 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1649 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1650 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1651 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1652 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1653 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1645 
 #endif
 1654 
 #endif
1646
1655
1647 
 /**
 1656 
 /**
1655 
  *  - Change to green once print has finished
 1664 
  *  - Change to green once print has finished
1656 
  *  - Turn off after the print has finished and the user has pushed a button
 1665 
  *  - Turn off after the print has finished and the user has pushed a button
1657 
  */
 1666 
  */
1658 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1667 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1659 
   #define PRINTER_EVENT_LEDS
 1668 
   #define PRINTER_EVENT_LEDS
1660 
 #endif
 1669 
 #endif
1661
1670

+ 15
- 6
Marlin/src/config/examples/TinyBoy2/Configuration.h View File

1644 
  * Adds the M150 command to set the LED (or LED strip) color.
 1644 
  * Adds the M150 command to set the LED (or LED strip) color.
1645 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1645 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1646 
  * luminance values can be set from 0 to 255.
 1646 
  * luminance values can be set from 0 to 255.
1647 
+ * For Neopixel LED overall brightness parameters is also available
1647 
  *
 1648 
  *
1648 
  * *** CAUTION ***
 1649 
  * *** CAUTION ***
1649 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1650 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1650 
  *  as the Arduino cannot handle the current the LEDs will require.
 1651 
  *  as the Arduino cannot handle the current the LEDs will require.
1651 
  *  Failure to follow this precaution can destroy your Arduino!
 1652 
  *  Failure to follow this precaution can destroy your Arduino!
1653 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1654 
+ *  cannot handle the current, separate 5V power supply must be used
1652 
  * *** CAUTION ***
 1655 
  * *** CAUTION ***
1653 
  *
 1656 
  *
1657 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1658 
+ *
1654 
  */
 1659 
  */
1660 
+
1655 
 //#define RGB_LED
 1661 
 //#define RGB_LED
1656 
 //#define RGBW_LED
 1662 
 //#define RGBW_LED
1657 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1663 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1662 
 #endif
 1668 
 #endif
1663
1669
1664 
 // Support for Adafruit Neopixel LED driver
 1670 
 // Support for Adafruit Neopixel LED driver
1665 
-//#define NEOPIXEL_RGBW_LED
1666 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1667 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1668 
-  #define NEOPIXEL_PIXELS 3
1669 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1671 
+//#define NEOPIXEL_LED
1672 
+#if ENABLED(NEOPIXEL_LED)
1673 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1674 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1675 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1676 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1677 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1678 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1670 
 #endif
 1679 
 #endif
1671
1680
1672 
 /**
 1681 
 /**
1680 
  *  - Change to green once print has finished
 1689 
  *  - Change to green once print has finished
1681 
  *  - Turn off after the print has finished and the user has pushed a button
 1690 
  *  - Turn off after the print has finished and the user has pushed a button
1682 
  */
 1691 
  */
1683 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1692 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1684 
   #define PRINTER_EVENT_LEDS
 1693 
   #define PRINTER_EVENT_LEDS
1685 
 #endif
 1694 
 #endif
1686
1695

+ 15
- 6
Marlin/src/config/examples/Velleman/K8200/Configuration.h View File

1623 
  * Adds the M150 command to set the LED (or LED strip) color.
 1623 
  * Adds the M150 command to set the LED (or LED strip) color.
1624 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1624 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1625 
  * luminance values can be set from 0 to 255.
 1625 
  * luminance values can be set from 0 to 255.
1626 
+ * For Neopixel LED overall brightness parameters is also available
1626 
  *
 1627 
  *
1627 
  * *** CAUTION ***
 1628 
  * *** CAUTION ***
1628 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1629 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1629 
  *  as the Arduino cannot handle the current the LEDs will require.
 1630 
  *  as the Arduino cannot handle the current the LEDs will require.
1630 
  *  Failure to follow this precaution can destroy your Arduino!
 1631 
  *  Failure to follow this precaution can destroy your Arduino!
1632 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1633 
+ *  cannot handle the current, separate 5V power supply must be used
1631 
  * *** CAUTION ***
 1634 
  * *** CAUTION ***
1632 
  *
 1635 
  *
1636 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1637 
+ *
1633 
  */
 1638 
  */
1639 
+
1634 
 //#define RGB_LED
 1640 
 //#define RGB_LED
1635 
 //#define RGBW_LED
 1641 
 //#define RGBW_LED
1636 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1642 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1641 
 #endif
 1647 
 #endif
1642
1648
1643 
 // Support for Adafruit Neopixel LED driver
 1649 
 // Support for Adafruit Neopixel LED driver
1644 
-//#define NEOPIXEL_RGBW_LED
1645 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1646 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1647 
-  #define NEOPIXEL_PIXELS 3
1648 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1650 
+//#define NEOPIXEL_LED
1651 
+#if ENABLED(NEOPIXEL_LED)
1652 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1653 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1654 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1655 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1656 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1657 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1649 
 #endif
 1658 
 #endif
1650
1659
1651 
 /**
 1660 
 /**
1659 
  *  - Change to green once print has finished
 1668 
  *  - Change to green once print has finished
1660 
  *  - Turn off after the print has finished and the user has pushed a button
 1669 
  *  - Turn off after the print has finished and the user has pushed a button
1661 
  */
 1670 
  */
1662 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1671 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1663 
   #define PRINTER_EVENT_LEDS
 1672 
   #define PRINTER_EVENT_LEDS
1664 
 #endif
 1673 
 #endif
1665
1674

+ 15
- 6
Marlin/src/config/examples/Velleman/K8400/Configuration.h View File

1588 
  * Adds the M150 command to set the LED (or LED strip) color.
 1588 
  * Adds the M150 command to set the LED (or LED strip) color.
1589 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1589 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1590 
  * luminance values can be set from 0 to 255.
 1590 
  * luminance values can be set from 0 to 255.
1591 
+ * For Neopixel LED overall brightness parameters is also available
1591 
  *
 1592 
  *
1592 
  * *** CAUTION ***
 1593 
  * *** CAUTION ***
1593 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1594 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1594 
  *  as the Arduino cannot handle the current the LEDs will require.
 1595 
  *  as the Arduino cannot handle the current the LEDs will require.
1595 
  *  Failure to follow this precaution can destroy your Arduino!
 1596 
  *  Failure to follow this precaution can destroy your Arduino!
1597 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1598 
+ *  cannot handle the current, separate 5V power supply must be used
1596 
  * *** CAUTION ***
 1599 
  * *** CAUTION ***
1597 
  *
 1600 
  *
1601 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1602 
+ *
1598 
  */
 1603 
  */
1604 
+
1599 
 //#define RGB_LED
 1605 
 //#define RGB_LED
1600 
 //#define RGBW_LED
 1606 
 //#define RGBW_LED
1601 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1607 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1606 
 #endif
 1612 
 #endif
1607
1613
1608 
 // Support for Adafruit Neopixel LED driver
 1614 
 // Support for Adafruit Neopixel LED driver
1609 
-//#define NEOPIXEL_RGBW_LED
1610 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1611 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1612 
-  #define NEOPIXEL_PIXELS 3
1613 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1615 
+//#define NEOPIXEL_LED
1616 
+#if ENABLED(NEOPIXEL_LED)
1617 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1618 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1619 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1620 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1621 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1622 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1614 
 #endif
 1623 
 #endif
1615
1624
1616 
 /**
 1625 
 /**
1624 
  *  - Change to green once print has finished
 1633 
  *  - Change to green once print has finished
1625 
  *  - Turn off after the print has finished and the user has pushed a button
 1634 
  *  - Turn off after the print has finished and the user has pushed a button
1626 
  */
 1635 
  */
1627 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1636 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1628 
   #define PRINTER_EVENT_LEDS
 1637 
   #define PRINTER_EVENT_LEDS
1629 
 #endif
 1638 
 #endif
1630
1639

+ 15
- 6
Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h View File

1588 
  * Adds the M150 command to set the LED (or LED strip) color.
 1588 
  * Adds the M150 command to set the LED (or LED strip) color.
1589 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1589 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1590 
  * luminance values can be set from 0 to 255.
 1590 
  * luminance values can be set from 0 to 255.
1591 
+ * For Neopixel LED overall brightness parameters is also available
1591 
  *
 1592 
  *
1592 
  * *** CAUTION ***
 1593 
  * *** CAUTION ***
1593 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1594 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1594 
  *  as the Arduino cannot handle the current the LEDs will require.
 1595 
  *  as the Arduino cannot handle the current the LEDs will require.
1595 
  *  Failure to follow this precaution can destroy your Arduino!
 1596 
  *  Failure to follow this precaution can destroy your Arduino!
1597 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1598 
+ *  cannot handle the current, separate 5V power supply must be used
1596 
  * *** CAUTION ***
 1599 
  * *** CAUTION ***
1597 
  *
 1600 
  *
1601 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1602 
+ *
1598 
  */
 1603 
  */
1604 
+
1599 
 //#define RGB_LED
 1605 
 //#define RGB_LED
1600 
 //#define RGBW_LED
 1606 
 //#define RGBW_LED
1601 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1607 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1606 
 #endif
 1612 
 #endif
1607
1613
1608 
 // Support for Adafruit Neopixel LED driver
 1614 
 // Support for Adafruit Neopixel LED driver
1609 
-//#define NEOPIXEL_RGBW_LED
1610 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1611 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1612 
-  #define NEOPIXEL_PIXELS 3
1613 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1615 
+//#define NEOPIXEL_LED
1616 
+#if ENABLED(NEOPIXEL_LED)
1617 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1618 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1619 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1620 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1621 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1622 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1614 
 #endif
 1623 
 #endif
1615
1624
1616 
 /**
 1625 
 /**
1624 
  *  - Change to green once print has finished
 1633 
  *  - Change to green once print has finished
1625 
  *  - Turn off after the print has finished and the user has pushed a button
 1634 
  *  - Turn off after the print has finished and the user has pushed a button
1626 
  */
 1635 
  */
1627 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1636 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1628 
   #define PRINTER_EVENT_LEDS
 1637 
   #define PRINTER_EVENT_LEDS
1629 
 #endif
 1638 
 #endif
1630
1639

+ 15
- 6
Marlin/src/config/examples/adafruit/ST7565/Configuration.h View File

1588 
  * Adds the M150 command to set the LED (or LED strip) color.
 1588 
  * Adds the M150 command to set the LED (or LED strip) color.
1589 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1589 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1590 
  * luminance values can be set from 0 to 255.
 1590 
  * luminance values can be set from 0 to 255.
1591 
+ * For Neopixel LED overall brightness parameters is also available
1591 
  *
 1592 
  *
1592 
  * *** CAUTION ***
 1593 
  * *** CAUTION ***
1593 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1594 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1594 
  *  as the Arduino cannot handle the current the LEDs will require.
 1595 
  *  as the Arduino cannot handle the current the LEDs will require.
1595 
  *  Failure to follow this precaution can destroy your Arduino!
 1596 
  *  Failure to follow this precaution can destroy your Arduino!
1597 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1598 
+ *  cannot handle the current, separate 5V power supply must be used
1596 
  * *** CAUTION ***
 1599 
  * *** CAUTION ***
1597 
  *
 1600 
  *
1601 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1602 
+ *
1598 
  */
 1603 
  */
1604 
+
1599 
 //#define RGB_LED
 1605 
 //#define RGB_LED
1600 
 //#define RGBW_LED
 1606 
 //#define RGBW_LED
1601 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1607 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1606 
 #endif
 1612 
 #endif
1607
1613
1608 
 // Support for Adafruit Neopixel LED driver
 1614 
 // Support for Adafruit Neopixel LED driver
1609 
-//#define NEOPIXEL_RGBW_LED
1610 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1611 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1612 
-  #define NEOPIXEL_PIXELS 3
1613 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1615 
+//#define NEOPIXEL_LED
1616 
+#if ENABLED(NEOPIXEL_LED)
1617 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1618 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1619 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1620 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1621 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1622 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1614 
 #endif
 1623 
 #endif
1615
1624
1616 
 /**
 1625 
 /**
1624 
  *  - Change to green once print has finished
 1633 
  *  - Change to green once print has finished
1625 
  *  - Turn off after the print has finished and the user has pushed a button
 1634 
  *  - Turn off after the print has finished and the user has pushed a button
1626 
  */
 1635 
  */
1627 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1636 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1628 
   #define PRINTER_EVENT_LEDS
 1637 
   #define PRINTER_EVENT_LEDS
1629 
 #endif
 1638 
 #endif
1630
1639

+ 15
- 6
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h View File

1716 
  * Adds the M150 command to set the LED (or LED strip) color.
 1716 
  * Adds the M150 command to set the LED (or LED strip) color.
1717 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1717 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1718 
  * luminance values can be set from 0 to 255.
 1718 
  * luminance values can be set from 0 to 255.
1719 
+ * For Neopixel LED overall brightness parameters is also available
1719 
  *
 1720 
  *
1720 
  * *** CAUTION ***
 1721 
  * *** CAUTION ***
1721 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1722 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1722 
  *  as the Arduino cannot handle the current the LEDs will require.
 1723 
  *  as the Arduino cannot handle the current the LEDs will require.
1723 
  *  Failure to follow this precaution can destroy your Arduino!
 1724 
  *  Failure to follow this precaution can destroy your Arduino!
1725 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1726 
+ *  cannot handle the current, separate 5V power supply must be used
1724 
  * *** CAUTION ***
 1727 
  * *** CAUTION ***
1725 
  *
 1728 
  *
1729 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1730 
+ *
1726 
  */
 1731 
  */
1732 
+
1727 
 //#define RGB_LED
 1733 
 //#define RGB_LED
1728 
 //#define RGBW_LED
 1734 
 //#define RGBW_LED
1729 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1735 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1734 
 #endif
 1740 
 #endif
1735
1741
1736 
 // Support for Adafruit Neopixel LED driver
 1742 
 // Support for Adafruit Neopixel LED driver
1737 
-//#define NEOPIXEL_RGBW_LED
1738 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1739 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1740 
-  #define NEOPIXEL_PIXELS 3
1741 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1743 
+//#define NEOPIXEL_LED
1744 
+#if ENABLED(NEOPIXEL_LED)
1745 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1746 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1747 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1748 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1749 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1750 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1742 
 #endif
 1751 
 #endif
1743
1752
1744 
 /**
 1753 
 /**
1752 
  *  - Change to green once print has finished
 1761 
  *  - Change to green once print has finished
1753 
  *  - Turn off after the print has finished and the user has pushed a button
 1762 
  *  - Turn off after the print has finished and the user has pushed a button
1754 
  */
 1763 
  */
1755 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1764 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1756 
   #define PRINTER_EVENT_LEDS
 1765 
   #define PRINTER_EVENT_LEDS
1757 
 #endif
 1766 
 #endif
1758
1767

+ 15
- 6
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h View File

1709 
  * Adds the M150 command to set the LED (or LED strip) color.
 1709 
  * Adds the M150 command to set the LED (or LED strip) color.
1710 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1710 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1711 
  * luminance values can be set from 0 to 255.
 1711 
  * luminance values can be set from 0 to 255.
1712 
+ * For Neopixel LED overall brightness parameters is also available
1712 
  *
 1713 
  *
1713 
  * *** CAUTION ***
 1714 
  * *** CAUTION ***
1714 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1715 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1715 
  *  as the Arduino cannot handle the current the LEDs will require.
 1716 
  *  as the Arduino cannot handle the current the LEDs will require.
1716 
  *  Failure to follow this precaution can destroy your Arduino!
 1717 
  *  Failure to follow this precaution can destroy your Arduino!
1718 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1719 
+ *  cannot handle the current, separate 5V power supply must be used
1717 
  * *** CAUTION ***
 1720 
  * *** CAUTION ***
1718 
  *
 1721 
  *
1722 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1723 
+ *
1719 
  */
 1724 
  */
1725 
+
1720 
 //#define RGB_LED
 1726 
 //#define RGB_LED
1721 
 //#define RGBW_LED
 1727 
 //#define RGBW_LED
1722 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1728 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1727 
 #endif
 1733 
 #endif
1728
1734
1729 
 // Support for Adafruit Neopixel LED driver
 1735 
 // Support for Adafruit Neopixel LED driver
1730 
-//#define NEOPIXEL_RGBW_LED
1731 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1732 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1733 
-  #define NEOPIXEL_PIXELS 3
1734 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1736 
+//#define NEOPIXEL_LED
1737 
+#if ENABLED(NEOPIXEL_LED)
1738 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1739 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1740 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1741 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1742 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1743 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1735 
 #endif
 1744 
 #endif
1736
1745
1737 
 /**
 1746 
 /**
1745 
  *  - Change to green once print has finished
 1754 
  *  - Change to green once print has finished
1746 
  *  - Turn off after the print has finished and the user has pushed a button
 1755 
  *  - Turn off after the print has finished and the user has pushed a button
1747 
  */
 1756 
  */
1748 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1757 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1749 
   #define PRINTER_EVENT_LEDS
 1758 
   #define PRINTER_EVENT_LEDS
1750 
 #endif
 1759 
 #endif
1751
1760

+ 15
- 6
Marlin/src/config/examples/delta/generic/Configuration.h View File

1704 
  * Adds the M150 command to set the LED (or LED strip) color.
 1704 
  * Adds the M150 command to set the LED (or LED strip) color.
1705 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1705 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1706 
  * luminance values can be set from 0 to 255.
 1706 
  * luminance values can be set from 0 to 255.
1707 
+ * For Neopixel LED overall brightness parameters is also available
1707 
  *
 1708 
  *
1708 
  * *** CAUTION ***
 1709 
  * *** CAUTION ***
1709 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1710 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1710 
  *  as the Arduino cannot handle the current the LEDs will require.
 1711 
  *  as the Arduino cannot handle the current the LEDs will require.
1711 
  *  Failure to follow this precaution can destroy your Arduino!
 1712 
  *  Failure to follow this precaution can destroy your Arduino!
1713 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1714 
+ *  cannot handle the current, separate 5V power supply must be used
1712 
  * *** CAUTION ***
 1715 
  * *** CAUTION ***
1713 
  *
 1716 
  *
1717 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1718 
+ *
1714 
  */
 1719 
  */
1720 
+
1715 
 //#define RGB_LED
 1721 
 //#define RGB_LED
1716 
 //#define RGBW_LED
 1722 
 //#define RGBW_LED
1717 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1723 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1722 
 #endif
 1728 
 #endif
1723
1729
1724 
 // Support for Adafruit Neopixel LED driver
 1730 
 // Support for Adafruit Neopixel LED driver
1725 
-//#define NEOPIXEL_RGBW_LED
1726 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1727 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1728 
-  #define NEOPIXEL_PIXELS 3
1729 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1731 
+//#define NEOPIXEL_LED
1732 
+#if ENABLED(NEOPIXEL_LED)
1733 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1734 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1735 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1736 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1737 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1738 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1730 
 #endif
 1739 
 #endif
1731
1740
1732 
 /**
 1741 
 /**
1740 
  *  - Change to green once print has finished
 1749 
  *  - Change to green once print has finished
1741 
  *  - Turn off after the print has finished and the user has pushed a button
 1750 
  *  - Turn off after the print has finished and the user has pushed a button
1742 
  */
 1751 
  */
1743 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1752 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1744 
   #define PRINTER_EVENT_LEDS
 1753 
   #define PRINTER_EVENT_LEDS
1745 
 #endif
 1754 
 #endif
1746
1755

+ 15
- 6
Marlin/src/config/examples/delta/kossel_mini/Configuration.h View File

1707 
  * Adds the M150 command to set the LED (or LED strip) color.
 1707 
  * Adds the M150 command to set the LED (or LED strip) color.
1708 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1708 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1709 
  * luminance values can be set from 0 to 255.
 1709 
  * luminance values can be set from 0 to 255.
1710 
+ * For Neopixel LED overall brightness parameters is also available
1710 
  *
 1711 
  *
1711 
  * *** CAUTION ***
 1712 
  * *** CAUTION ***
1712 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1713 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1713 
  *  as the Arduino cannot handle the current the LEDs will require.
 1714 
  *  as the Arduino cannot handle the current the LEDs will require.
1714 
  *  Failure to follow this precaution can destroy your Arduino!
 1715 
  *  Failure to follow this precaution can destroy your Arduino!
1716 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1717 
+ *  cannot handle the current, separate 5V power supply must be used
1715 
  * *** CAUTION ***
 1718 
  * *** CAUTION ***
1716 
  *
 1719 
  *
1720 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1721 
+ *
1717 
  */
 1722 
  */
1723 
+
1718 
 //#define RGB_LED
 1724 
 //#define RGB_LED
1719 
 //#define RGBW_LED
 1725 
 //#define RGBW_LED
1720 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1726 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1725 
 #endif
 1731 
 #endif
1726
1732
1727 
 // Support for Adafruit Neopixel LED driver
 1733 
 // Support for Adafruit Neopixel LED driver
1728 
-//#define NEOPIXEL_RGBW_LED
1729 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1730 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1731 
-  #define NEOPIXEL_PIXELS 3
1732 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1734 
+//#define NEOPIXEL_LED
1735 
+#if ENABLED(NEOPIXEL_LED)
1736 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1737 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1738 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1739 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1740 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1741 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1733 
 #endif
 1742 
 #endif
1734
1743
1735 
 /**
 1744 
 /**
1743 
  *  - Change to green once print has finished
 1752 
  *  - Change to green once print has finished
1744 
  *  - Turn off after the print has finished and the user has pushed a button
 1753 
  *  - Turn off after the print has finished and the user has pushed a button
1745 
  */
 1754 
  */
1746 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1755 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1747 
   #define PRINTER_EVENT_LEDS
 1756 
   #define PRINTER_EVENT_LEDS
1748 
 #endif
 1757 
 #endif
1749
1758

+ 15
- 6
Marlin/src/config/examples/delta/kossel_pro/Configuration.h View File

1707 
  * Adds the M150 command to set the LED (or LED strip) color.
 1707 
  * Adds the M150 command to set the LED (or LED strip) color.
1708 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1708 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1709 
  * luminance values can be set from 0 to 255.
 1709 
  * luminance values can be set from 0 to 255.
1710 
+ * For Neopixel LED overall brightness parameters is also available
1710 
  *
 1711 
  *
1711 
  * *** CAUTION ***
 1712 
  * *** CAUTION ***
1712 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1713 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1713 
  *  as the Arduino cannot handle the current the LEDs will require.
 1714 
  *  as the Arduino cannot handle the current the LEDs will require.
1714 
  *  Failure to follow this precaution can destroy your Arduino!
 1715 
  *  Failure to follow this precaution can destroy your Arduino!
1716 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1717 
+ *  cannot handle the current, separate 5V power supply must be used
1715 
  * *** CAUTION ***
 1718 
  * *** CAUTION ***
1716 
  *
 1719 
  *
1720 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1721 
+ *
1717 
  */
 1722 
  */
1723 
+
1718 
 //#define RGB_LED
 1724 
 //#define RGB_LED
1719 
 //#define RGBW_LED
 1725 
 //#define RGBW_LED
1720 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1726 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1725 
 #endif
 1731 
 #endif
1726
1732
1727 
 // Support for Adafruit Neopixel LED driver
 1733 
 // Support for Adafruit Neopixel LED driver
1728 
-//#define NEOPIXEL_RGBW_LED
1729 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1730 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1731 
-  #define NEOPIXEL_PIXELS 3
1732 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1734 
+//#define NEOPIXEL_LED
1735 
+#if ENABLED(NEOPIXEL_LED)
1736 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1737 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1738 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1739 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1740 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1741 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1733 
 #endif
 1742 
 #endif
1734
1743
1735 
 /**
 1744 
 /**
1743 
  *  - Change to green once print has finished
 1752 
  *  - Change to green once print has finished
1744 
  *  - Turn off after the print has finished and the user has pushed a button
 1753 
  *  - Turn off after the print has finished and the user has pushed a button
1745 
  */
 1754 
  */
1746 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1755 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1747 
   #define PRINTER_EVENT_LEDS
 1756 
   #define PRINTER_EVENT_LEDS
1748 
 #endif
 1757 
 #endif
1749
1758

+ 15
- 6
Marlin/src/config/examples/delta/kossel_xl/Configuration.h View File

1716 
  * Adds the M150 command to set the LED (or LED strip) color.
 1716 
  * Adds the M150 command to set the LED (or LED strip) color.
1717 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1717 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1718 
  * luminance values can be set from 0 to 255.
 1718 
  * luminance values can be set from 0 to 255.
1719 
+ * For Neopixel LED overall brightness parameters is also available
1719 
  *
 1720 
  *
1720 
  * *** CAUTION ***
 1721 
  * *** CAUTION ***
1721 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1722 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1722 
  *  as the Arduino cannot handle the current the LEDs will require.
 1723 
  *  as the Arduino cannot handle the current the LEDs will require.
1723 
  *  Failure to follow this precaution can destroy your Arduino!
 1724 
  *  Failure to follow this precaution can destroy your Arduino!
1725 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1726 
+ *  cannot handle the current, separate 5V power supply must be used
1724 
  * *** CAUTION ***
 1727 
  * *** CAUTION ***
1725 
  *
 1728 
  *
1729 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1730 
+ *
1726 
  */
 1731 
  */
1732 
+
1727 
 //#define RGB_LED
 1733 
 //#define RGB_LED
1728 
 //#define RGBW_LED
 1734 
 //#define RGBW_LED
1729 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1735 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1734 
 #endif
 1740 
 #endif
1735
1741
1736 
 // Support for Adafruit Neopixel LED driver
 1742 
 // Support for Adafruit Neopixel LED driver
1737 
-//#define NEOPIXEL_RGBW_LED
1738 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1739 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1740 
-  #define NEOPIXEL_PIXELS 3
1741 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1743 
+//#define NEOPIXEL_LED
1744 
+#if ENABLED(NEOPIXEL_LED)
1745 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1746 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1747 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1748 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1749 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1750 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1742 
 #endif
 1751 
 #endif
1743
1752
1744 
 /**
 1753 
 /**
1752 
  *  - Change to green once print has finished
 1761 
  *  - Change to green once print has finished
1753 
  *  - Turn off after the print has finished and the user has pushed a button
 1762 
  *  - Turn off after the print has finished and the user has pushed a button
1754 
  */
 1763 
  */
1755 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1764 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1756 
   #define PRINTER_EVENT_LEDS
 1765 
   #define PRINTER_EVENT_LEDS
1757 
 #endif
 1766 
 #endif
1758
1767

+ 15
- 6
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h View File

1602 
  * Adds the M150 command to set the LED (or LED strip) color.
 1602 
  * Adds the M150 command to set the LED (or LED strip) color.
1603 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1603 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1604 
  * luminance values can be set from 0 to 255.
 1604 
  * luminance values can be set from 0 to 255.
1605 
+ * For Neopixel LED overall brightness parameters is also available
1605 
  *
 1606 
  *
1606 
  * *** CAUTION ***
 1607 
  * *** CAUTION ***
1607 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1608 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1608 
  *  as the Arduino cannot handle the current the LEDs will require.
 1609 
  *  as the Arduino cannot handle the current the LEDs will require.
1609 
  *  Failure to follow this precaution can destroy your Arduino!
 1610 
  *  Failure to follow this precaution can destroy your Arduino!
1611 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1612 
+ *  cannot handle the current, separate 5V power supply must be used
1610 
  * *** CAUTION ***
 1613 
  * *** CAUTION ***
1611 
  *
 1614 
  *
1615 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1616 
+ *
1612 
  */
 1617 
  */
1618 
+
1613 
 //#define RGB_LED
 1619 
 //#define RGB_LED
1614 
 //#define RGBW_LED
 1620 
 //#define RGBW_LED
1615 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1621 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1620 
 #endif
 1626 
 #endif
1621
1627
1622 
 // Support for Adafruit Neopixel LED driver
 1628 
 // Support for Adafruit Neopixel LED driver
1623 
-//#define NEOPIXEL_RGBW_LED
1624 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1625 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1626 
-  #define NEOPIXEL_PIXELS 3
1627 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1629 
+//#define NEOPIXEL_LED
1630 
+#if ENABLED(NEOPIXEL_LED)
1631 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1632 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1633 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1634 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1635 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1636 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1628 
 #endif
 1637 
 #endif
1629
1638
1630 
 /**
 1639 
 /**
1638 
  *  - Change to green once print has finished
 1647 
  *  - Change to green once print has finished
1639 
  *  - Turn off after the print has finished and the user has pushed a button
 1648 
  *  - Turn off after the print has finished and the user has pushed a button
1640 
  */
 1649 
  */
1641 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1650 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1642 
   #define PRINTER_EVENT_LEDS
 1651 
   #define PRINTER_EVENT_LEDS
1643 
 #endif
 1652 
 #endif
1644
1653

+ 15
- 6
Marlin/src/config/examples/makibox/Configuration.h View File

1591 
  * Adds the M150 command to set the LED (or LED strip) color.
 1591 
  * Adds the M150 command to set the LED (or LED strip) color.
1592 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1592 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1593 
  * luminance values can be set from 0 to 255.
 1593 
  * luminance values can be set from 0 to 255.
1594 
+ * For Neopixel LED overall brightness parameters is also available
1594 
  *
 1595 
  *
1595 
  * *** CAUTION ***
 1596 
  * *** CAUTION ***
1596 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1597 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1597 
  *  as the Arduino cannot handle the current the LEDs will require.
 1598 
  *  as the Arduino cannot handle the current the LEDs will require.
1598 
  *  Failure to follow this precaution can destroy your Arduino!
 1599 
  *  Failure to follow this precaution can destroy your Arduino!
1600 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1601 
+ *  cannot handle the current, separate 5V power supply must be used
1599 
  * *** CAUTION ***
 1602 
  * *** CAUTION ***
1600 
  *
 1603 
  *
1604 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1605 
+ *
1601 
  */
 1606 
  */
1607 
+
1602 
 //#define RGB_LED
 1608 
 //#define RGB_LED
1603 
 //#define RGBW_LED
 1609 
 //#define RGBW_LED
1604 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1610 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1609 
 #endif
 1615 
 #endif
1610
1616
1611 
 // Support for Adafruit Neopixel LED driver
 1617 
 // Support for Adafruit Neopixel LED driver
1612 
-//#define NEOPIXEL_RGBW_LED
1613 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1614 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1615 
-  #define NEOPIXEL_PIXELS 3
1616 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1618 
+//#define NEOPIXEL_LED
1619 
+#if ENABLED(NEOPIXEL_LED)
1620 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1621 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1622 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1623 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1624 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1625 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1617 
 #endif
 1626 
 #endif
1618
1627
1619 
 /**
 1628 
 /**
1627 
  *  - Change to green once print has finished
 1636 
  *  - Change to green once print has finished
1628 
  *  - Turn off after the print has finished and the user has pushed a button
 1637 
  *  - Turn off after the print has finished and the user has pushed a button
1629 
  */
 1638 
  */
1630 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1639 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1631 
   #define PRINTER_EVENT_LEDS
 1640 
   #define PRINTER_EVENT_LEDS
1632 
 #endif
 1641 
 #endif
1633
1642

+ 9
- 6
Marlin/src/config/examples/stm32f103ret6/Configuration.h View File

1561 
 #endif
 1561 
 #endif
1562
1562
1563 
 // Support for Adafruit Neopixel LED driver
 1563 
 // Support for Adafruit Neopixel LED driver
1564 
-//#define NEOPIXEL_RGBW_LED
1565 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1566 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1567 
-  #define NEOPIXEL_PIXELS 3
1568 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1564 
+//#define NEOPIXEL_LED
1565 
+#if ENABLED(NEOPIXEL_LED)
1566 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1567 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1568 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1569 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1570 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1571 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1569 
 #endif
 1572 
 #endif
1570
1573
1571 
 /**
 1574 
 /**
1579 
  *  - Change to green once print has finished
 1582 
  *  - Change to green once print has finished
1580 
  *  - Turn off after the print has finished and the user has pushed a button
 1583 
  *  - Turn off after the print has finished and the user has pushed a button
1581 
  */
 1584 
  */
1582 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1585 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1583 
   #define PRINTER_EVENT_LEDS
 1586 
   #define PRINTER_EVENT_LEDS
1584 
 #endif
 1587 
 #endif
1585
1588

+ 15
- 6
Marlin/src/config/examples/tvrrug/Round2/Configuration.h View File

1583 
  * Adds the M150 command to set the LED (or LED strip) color.
 1583 
  * Adds the M150 command to set the LED (or LED strip) color.
1584 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1584 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1585 
  * luminance values can be set from 0 to 255.
 1585 
  * luminance values can be set from 0 to 255.
1586 
+ * For Neopixel LED overall brightness parameters is also available
1586 
  *
 1587 
  *
1587 
  * *** CAUTION ***
 1588 
  * *** CAUTION ***
1588 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1589 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1589 
  *  as the Arduino cannot handle the current the LEDs will require.
 1590 
  *  as the Arduino cannot handle the current the LEDs will require.
1590 
  *  Failure to follow this precaution can destroy your Arduino!
 1591 
  *  Failure to follow this precaution can destroy your Arduino!
1592 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1593 
+ *  cannot handle the current, separate 5V power supply must be used
1591 
  * *** CAUTION ***
 1594 
  * *** CAUTION ***
1592 
  *
 1595 
  *
1596 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1597 
+ *
1593 
  */
 1598 
  */
1599 
+
1594 
 //#define RGB_LED
 1600 
 //#define RGB_LED
1595 
 //#define RGBW_LED
 1601 
 //#define RGBW_LED
1596 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1602 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1601 
 #endif
 1607 
 #endif
1602
1608
1603 
 // Support for Adafruit Neopixel LED driver
 1609 
 // Support for Adafruit Neopixel LED driver
1604 
-//#define NEOPIXEL_RGBW_LED
1605 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1606 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1607 
-  #define NEOPIXEL_PIXELS 3
1608 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1610 
+//#define NEOPIXEL_LED
1611 
+#if ENABLED(NEOPIXEL_LED)
1612 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1613 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1614 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1615 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1616 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1617 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1609 
 #endif
 1618 
 #endif
1610
1619
1611 
 /**
 1620 
 /**
1619 
  *  - Change to green once print has finished
 1628 
  *  - Change to green once print has finished
1620 
  *  - Turn off after the print has finished and the user has pushed a button
 1629 
  *  - Turn off after the print has finished and the user has pushed a button
1621 
  */
 1630 
  */
1622 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1631 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1623 
   #define PRINTER_EVENT_LEDS
 1632 
   #define PRINTER_EVENT_LEDS
1624 
 #endif
 1633 
 #endif
1625
1634

+ 15
- 6
Marlin/src/config/examples/wt150/Configuration.h View File

1593 
  * Adds the M150 command to set the LED (or LED strip) color.
 1593 
  * Adds the M150 command to set the LED (or LED strip) color.
1594 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
 1594 
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
1595 
  * luminance values can be set from 0 to 255.
 1595 
  * luminance values can be set from 0 to 255.
1596 
+ * For Neopixel LED overall brightness parameters is also available
1596 
  *
 1597 
  *
1597 
  * *** CAUTION ***
 1598 
  * *** CAUTION ***
1598 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
 1599 
  *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
1599 
  *  as the Arduino cannot handle the current the LEDs will require.
 1600 
  *  as the Arduino cannot handle the current the LEDs will require.
1600 
  *  Failure to follow this precaution can destroy your Arduino!
 1601 
  *  Failure to follow this precaution can destroy your Arduino!
1602 
+ *  Neopixel LED is 5V powered, but linear 5V regulator on Arduino
1603 
+ *  cannot handle the current, separate 5V power supply must be used
1601 
  * *** CAUTION ***
 1604 
  * *** CAUTION ***
1602 
  *
 1605 
  *
1606 
+ * LED type. This options are mutualy exclusive. Uncomment only one.
1607 
+ *
1603 
  */
 1608 
  */
1609 
+
1604 
 //#define RGB_LED
 1610 
 //#define RGB_LED
1605 
 //#define RGBW_LED
 1611 
 //#define RGBW_LED
1606 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
 1612 
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
1611 
 #endif
 1617 
 #endif
1612
1618
1613 
 // Support for Adafruit Neopixel LED driver
 1619 
 // Support for Adafruit Neopixel LED driver
1614 
-//#define NEOPIXEL_RGBW_LED
1615 
-#if ENABLED(NEOPIXEL_RGBW_LED)
1616 
-  #define NEOPIXEL_PIN    4       // D4 (EXP2-5 on Printrboard)
1617 
-  #define NEOPIXEL_PIXELS 3
1618 
-  //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
1620 
+//#define NEOPIXEL_LED
1621 
+#if ENABLED(NEOPIXEL_LED)
1622 
+  #define NEOPIXEL_TYPE   NEO_GRB  // NEO_GRBW / NEO_GRB - four/three channel driver type (definned in Adafruit_NeoPixel.h)
1623 
+  #define NEOPIXEL_PIN    4        // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
1624 
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs on strip
1625 
+  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Comment out for all LEDs to change at once.
1626 
+  #define NEOPIXEL_BRIGHTNESS 255  // Initial brightness 0-255
1627 
+  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
1619 
 #endif
 1628 
 #endif
1620
1629
1621 
 /**
 1630 
 /**
1629 
  *  - Change to green once print has finished
 1638 
  *  - Change to green once print has finished
1630 
  *  - Turn off after the print has finished and the user has pushed a button
 1639 
  *  - Turn off after the print has finished and the user has pushed a button
1631 
  */
 1640 
  */
1632 
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
1641 
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
1633 
   #define PRINTER_EVENT_LEDS
 1642 
   #define PRINTER_EVENT_LEDS
1634 
 #endif
 1643 
 #endif
1635
1644

+ 7
- 10
Marlin/src/feature/leds/leds.cpp View File

31 
 #include "leds.h"
 31 
 #include "leds.h"
32
32
33 
 void set_led_color(
 33 
 void set_led_color(
34 
-  const uint8_t r, const uint8_t g, const uint8_t b
35 
-  #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_RGBW_LED)
36 
-    , const uint8_t w
37 
-    #if ENABLED(NEOPIXEL_RGBW_LED)
38 
-      , bool isSequence
39 
-    #endif
40 
-  #endif
34 
+  const uint8_t r, const uint8_t g, const uint8_t b , const uint8_t w , const uint8_t p
41 
 ) {
 35 
 ) {
42
36
43 
-  #if ENABLED(NEOPIXEL_RGBW_LED)
44 
-    if (neopixel_set_led_color(r, g, b, w, isSequence))
45 
-      return;
37 
+  #if ENABLED(NEOPIXEL_LED)
38 
+    if (w == 255 || (r == 255 && g == 255 && b == 255))
39 
+      neopixel_set_led_color(NEO_WHITE, p);
40 
+    else
41 
+      neopixel_set_led_color(r, g, b, w, p);
42 
+    return;
46 
   #endif
 43 
   #endif
47
44
48 
   #if ENABLED(BLINKM)
 45 
   #if ENABLED(BLINKM)

+ 22
- 8
Marlin/src/feature/leds/leds.h View File

27 
 #ifndef __LEDS_H__
 27 
 #ifndef __LEDS_H__
28 
 #define __LEDS_H__
 28 
 #define __LEDS_H__
29
29
30 
-#if ENABLED(NEOPIXEL_RGBW_LED)
30 
+#if ENABLED(NEOPIXEL_LED)
31 
   #include <Adafruit_NeoPixel.h>
 31 
   #include <Adafruit_NeoPixel.h>
32 
   #include "neopixel.h"
 32 
   #include "neopixel.h"
33 
 #endif
 33 
 #endif
40 
   #include "pca9632.h"
 40 
   #include "pca9632.h"
41 
 #endif
 41 
 #endif
42
42
43 
-void set_led_color(
44 
-  const uint8_t r, const uint8_t g, const uint8_t b
45 
-  #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_RGBW_LED)
46 
-    , const uint8_t w = 0
47 
-    #if ENABLED(NEOPIXEL_RGBW_LED)
48 
-      , bool isSequence = false
49 
-    #endif
43 
+#if ENABLED(NEOPIXEL_LED)
44 
+  #if NEOPIXEL_TYPE == NEO_RGB || NEOPIXEL_TYPE == NEO_RBG || NEOPIXEL_TYPE == NEO_GRB || NEOPIXEL_TYPE == NEO_GBR || NEOPIXEL_TYPE == NEO_BRG || NEOPIXEL_TYPE == NEO_BGR
45 
+    #define NEO_WHITE 255, 255, 255
46 
+  #else
47 
+    #define NEO_WHITE 0, 0, 0, 255
50 
   #endif
 48 
   #endif
49 
+#endif
50 
+
51 
+#if ENABLED(RGB_LED) || ENABLED(BLINKM) || ENABLED(PCA9632)
52 
+  #define LED_WHITE 255, 255, 255
53 
+#elif ENABLED(RGBW_LED)
54 
+  #define LED_WHITE 0, 0, 0, 255
55 
+#endif
56 
+
57 
+#if ENABLED(NEOPIXEL_LED)
58 
+  #define LED_BRIGHTNESS pixels.getBrightness()
59 
+#else
60 
+  #define LED_BRIGHTNESS 255
61 
+#endif
62 
+
63 
+void set_led_color(
64 
+  const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w = 0, const uint8_t p = 255
51 
 );
 65 
 );
52
66
53 
 #endif // __LEDS_H__
 67 
 #endif // __LEDS_H__

+ 11
- 10
Marlin/src/feature/leds/neopixel.cpp View File

26
26
27 
 #include "../../inc/MarlinConfig.h"
 27 
 #include "../../inc/MarlinConfig.h"
28
28
29 
-#if ENABLED(NEOPIXEL_RGBW_LED)
29 
+#if ENABLED(NEOPIXEL_LED)
30
30
31 
 #include "neopixel.h"
 31 
 #include "neopixel.h"
32
32
33 
-Adafruit_NeoPixel pixels(NEOPIXEL_PIXELS, NEOPIXEL_PIN, NEO_GRBW + NEO_KHZ800);
33 
+Adafruit_NeoPixel pixels(NEOPIXEL_PIXELS, NEOPIXEL_PIN, NEOPIXEL_TYPE + NEO_KHZ800);
34
34
35 
 void set_neopixel_color(const uint32_t color) {
 35 
 void set_neopixel_color(const uint32_t color) {
36 
   for (uint16_t i = 0; i < pixels.numPixels(); ++i)
 36 
   for (uint16_t i = 0; i < pixels.numPixels(); ++i)
39 
 }
 39 
 }
40
40
41 
 void setup_neopixel() {
 41 
 void setup_neopixel() {
42 
-  pixels.setBrightness(255); // 0 - 255 range
42 
+  pixels.setBrightness(NEOPIXEL_BRIGHTNESS); // 0 - 255 range
43 
   pixels.begin();
 43 
   pixels.begin();
44 
   pixels.show(); // initialize to all off
 44 
   pixels.show(); // initialize to all off
45
45
55 
   set_neopixel_color(pixels.Color(0, 0, 0, 255));    // white
 55 
   set_neopixel_color(pixels.Color(0, 0, 0, 255));    // white
56 
 }
 56 
 }
57
57
58 
-bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const bool isSequence) {
58 
+bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const uint8_t p) {
59 
   const uint32_t color = pixels.Color(r, g, b, w);
 59 
   const uint32_t color = pixels.Color(r, g, b, w);
60 
-  static uint16_t nextLed = 0;
61 
-  if (!isSequence)
60 
+  pixels.setBrightness(p);
61 
+  #if !ENABLED(NEOPIXEL_IS_SEQUENTIAL)
62 
     set_neopixel_color(color);
 62 
     set_neopixel_color(color);
63 
-  else {
63 
+    return false;
64 
+  #else
65 
+    static uint16_t nextLed = 0;
64 
     pixels.setPixelColor(nextLed, color);
 66 
     pixels.setPixelColor(nextLed, color);
65 
     pixels.show();
 67 
     pixels.show();
66 
     if (++nextLed >= pixels.numPixels()) nextLed = 0;
 68 
     if (++nextLed >= pixels.numPixels()) nextLed = 0;
67 
     return true;
 69 
     return true;
68 
-  }
69 
-  return false;
70 
+  #endif
70 
 }
 71 
 }
71
72
72 
-#endif // NEOPIXEL_RGBW_LED
73 
+#endif // NEOPIXEL_LED

+ 1
- 1
Marlin/src/feature/leds/neopixel.h View File

31 
 #include <stdint.h>
 31 
 #include <stdint.h>
32
32
33 
 void setup_neopixel();
 33 
 void setup_neopixel();
34 
-bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const bool isSequence);
34 
+bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const uint8_t p);
35
35
36 
 extern Adafruit_NeoPixel pixels;
 36 
 extern Adafruit_NeoPixel pixels;
37
37

+ 20
- 17
Marlin/src/gcode/feature/leds/M150.cpp View File

28 
 #include "../../../feature/leds/leds.h"
 28 
 #include "../../../feature/leds/leds.h"
29
29
30 
 /**
 30 
 /**
31 
- * M150: Set Status LED Color - Use R-U-B-W for R-G-B-W
32 
- *
33 
- * Always sets all 3 or 4 components. If a component is left out, set to 0.
34 
- *
35 
- * Examples:
36 
- *
37 
- *   M150 R255       ; Turn LED red
38 
- *   M150 R255 U127  ; Turn LED orange (PWM only)
39 
- *   M150            ; Turn LED off
40 
- *   M150 R U B      ; Turn LED white
41 
- *   M150 W          ; Turn LED white using a white LED
42 
- *
43 
- */
31 
+* M150: Set Status LED Color - Use R-U-B-W for R-G-B-W
32 
+*       and Brightness       - Use P (for NEOPIXEL only)
33 
+*
34 
+* Always sets all 3 or 4 components. If a component is left out, set to 0.
35 
+*                                    If brightness is left out, no value changed
36 
+*
37 
+* Examples:
38 
+*
39 
+*   M150 R255       ; Turn LED red
40 
+*   M150 R255 U127  ; Turn LED orange (PWM only)
41 
+*   M150            ; Turn LED off
42 
+*   M150 R U B      ; Turn LED white
43 
+*   M150 W          ; Turn LED white using a white LED
44 
+*   M150 P127       ; Set LED 50% brightness
45 
+*   M150 P          ; Set LED full brightness
46 
+*/
47 
+
44 
 void GcodeSuite::M150() {
 48 
 void GcodeSuite::M150() {
45 
   set_led_color(
 49 
   set_led_color(
46 
     parser.seen('R') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
 50 
     parser.seen('R') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
47 
     parser.seen('U') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
 51 
     parser.seen('U') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
48 
-    parser.seen('B') ? (parser.has_value() ? parser.value_byte() : 255) : 0
49 
-    #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_RGBW_LED)
50 
-      , parser.seen('W') ? (parser.has_value() ? parser.value_byte() : 255) : 0
51 
-    #endif
52 
+    parser.seen('B') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
53 
+    parser.seen('W') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
54 
+    parser.seen('P') ? (parser.has_value() ? parser.value_byte() : 255) : LED_BRIGHTNESS
52 
   );
 55 
   );
53 
 }
 56 
 }
54
57

+ 1
- 1
Marlin/src/gcode/gcode.h View File

138 
  * M140 - Set bed target temp. S<temp>
 138 
  * M140 - Set bed target temp. S<temp>
139 
  * M145 - Set heatup values for materials on the LCD. H<hotend> B<bed> F<fan speed> for S<material> (0=PLA, 1=ABS)
 139 
  * M145 - Set heatup values for materials on the LCD. H<hotend> B<bed> F<fan speed> for S<material> (0=PLA, 1=ABS)
140 
  * M149 - Set temperature units. (Requires TEMPERATURE_UNITS_SUPPORT)
 140 
  * M149 - Set temperature units. (Requires TEMPERATURE_UNITS_SUPPORT)
141 
- * M150 - Set Status LED Color as R<red> U<green> B<blue>. Values 0-255. (Requires BLINKM, RGB_LED, RGBW_LED, or PCA9632)
141 
+ * M150 - Set Status LED Color as R<red> U<green> B<blue> P<bright>. Values 0-255. (Requires BLINKM, RGB_LED, RGBW_LED, NEOPIXEL_LED, or PCA9632).
142 
  * M155 - Auto-report temperatures with interval of S<seconds>. (Requires AUTO_REPORT_TEMPERATURES)
 142 
  * M155 - Auto-report temperatures with interval of S<seconds>. (Requires AUTO_REPORT_TEMPERATURES)
143 
  * M163 - Set a single proportion for a mixing extruder. (Requires MIXING_EXTRUDER)
 143 
  * M163 - Set a single proportion for a mixing extruder. (Requires MIXING_EXTRUDER)
144 
  * M164 - Save the mix as a virtual extruder. (Requires MIXING_EXTRUDER and MIXING_VIRTUAL_TOOLS)
 144 
  * M164 - Save the mix as a virtual extruder. (Requires MIXING_EXTRUDER and MIXING_VIRTUAL_TOOLS)

+ 7
- 10
Marlin/src/gcode/temperature/M104_M109.cpp View File

31 
   #include "../../module/printcounter.h"
 31 
   #include "../../module/printcounter.h"
32 
 #endif
 32 
 #endif
33
33
34 
-#if HAS_COLOR_LEDS
34 
+#if ENABLED(PRINTER_EVENT_LEDS)
35 
   #include "../../feature/leds/leds.h"
 35 
   #include "../../feature/leds/leds.h"
36 
 #endif
 36 
 #endif
37
37
190 
         const uint8_t blue = map(constrain(temp, start_temp, target_temp), start_temp, target_temp, 255, 0);
 190 
         const uint8_t blue = map(constrain(temp, start_temp, target_temp), start_temp, target_temp, 255, 0);
191 
         if (blue != old_blue) {
 191 
         if (blue != old_blue) {
192 
           old_blue = blue;
 192 
           old_blue = blue;
193 
-          set_led_color(255, 0, blue
194 
-            #if ENABLED(NEOPIXEL_RGBW_LED)
195 
-              , 0, true
196 
-            #endif
197 
-          );
193 
+          set_led_color(255, 0, blue);
198 
         }
 194 
         }
199 
       }
 195 
       }
200 
     #endif
 196 
     #endif
230 
   if (wait_for_heatup) {
 226 
   if (wait_for_heatup) {
231 
     LCD_MESSAGEPGM(MSG_HEATING_COMPLETE);
 227 
     LCD_MESSAGEPGM(MSG_HEATING_COMPLETE);
232 
     #if ENABLED(PRINTER_EVENT_LEDS)
 228 
     #if ENABLED(PRINTER_EVENT_LEDS)
233 
-      #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_RGBW_LED)
234 
-        set_led_color(0, 0, 0, 255);  // Turn on the WHITE LED
235 
-      #else
236 
-        set_led_color(255, 255, 255); // Set LEDs All On
229 
+      #if ENABLED(RGB_LED) || ENABLED(BLINKM) || ENABLED(PCA9632) || ENABLED(RGBW_LED)
230 
+        set_led_color(LED_WHITE);
231 
+      #endif
232 
+      #if ENABLED(NEOPIXEL_LED)
233 
+        set_neopixel_color(pixels.Color(NEO_WHITE));
237 
       #endif
 234 
       #endif
238 
     #endif
 235 
     #endif
239 
   }
 236 
   }

+ 1
- 5
Marlin/src/gcode/temperature/M140_M190.cpp View File

132 
         const uint8_t red = map(constrain(temp, start_temp, target_temp), start_temp, target_temp, 0, 255);
 132 
         const uint8_t red = map(constrain(temp, start_temp, target_temp), start_temp, target_temp, 0, 255);
133 
         if (red != old_red) {
 133 
         if (red != old_red) {
134 
           old_red = red;
 134 
           old_red = red;
135 
-          set_led_color(red, 0, 255
136 
-            #if ENABLED(NEOPIXEL_RGBW_LED)
137 
-              , 0, true
138 
-            #endif
139 
-          );
135 
+          set_led_color(red, 0, 255);
140 
         }
 136 
         }
141 
       }
 137 
       }
142 
     #endif
 138 
     #endif

+ 1
- 1
Marlin/src/inc/Conditionals_LCD.h View File

483
483
484 
   #define HAS_SOFTWARE_ENDSTOPS (ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS))
 484 
   #define HAS_SOFTWARE_ENDSTOPS (ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS))
485 
   #define HAS_RESUME_CONTINUE (ENABLED(NEWPANEL) || ENABLED(EMERGENCY_PARSER))
 485 
   #define HAS_RESUME_CONTINUE (ENABLED(NEWPANEL) || ENABLED(EMERGENCY_PARSER))
486 
-  #define HAS_COLOR_LEDS (ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED))
486 
+  #define HAS_COLOR_LEDS (ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED))
487
487
488 
 #endif // CONDITIONALS_LCD_H
 488 
 #endif // CONDITIONALS_LCD_H

+ 6
- 4
Marlin/src/inc/SanityCheck.h View File

210 
   #error "MIN_RETRACT is now MIN_AUTORETRACT and MAX_AUTORETRACT. Please update your Configuration_adv.h."
 210 
   #error "MIN_RETRACT is now MIN_AUTORETRACT and MAX_AUTORETRACT. Please update your Configuration_adv.h."
211 
 #elif defined(ADVANCE)
 211 
 #elif defined(ADVANCE)
212 
   #error "ADVANCE was removed in Marlin 1.1.6. Please use LIN_ADVANCE."
 212 
   #error "ADVANCE was removed in Marlin 1.1.6. Please use LIN_ADVANCE."
213 
+#elif defined(NEOPIXEL_RGBW_LED)
214 
+  #error "NEOPIXEL_RGBW_LED is now NEOPIXEL_LED. Please update your configuration."
213 
 #endif
 215 
 #endif
214
216
215 
 /**
 217 
 /**
1100 
   #if !(_RGB_TEST && PIN_EXISTS(RGB_LED_W))
 1102 
   #if !(_RGB_TEST && PIN_EXISTS(RGB_LED_W))
1101 
     #error "RGBW_LED requires RGB_LED_R_PIN, RGB_LED_G_PIN, RGB_LED_B_PIN, and RGB_LED_W_PIN."
 1103 
     #error "RGBW_LED requires RGB_LED_R_PIN, RGB_LED_G_PIN, RGB_LED_B_PIN, and RGB_LED_W_PIN."
1102 
   #endif
 1104 
   #endif
1103 
-#elif ENABLED(NEOPIXEL_RGBW_LED)
1105 
+#elif ENABLED(NEOPIXEL_LED)
1104 
   #if !(PIN_EXISTS(NEOPIXEL) && NEOPIXEL_PIXELS > 0)
 1106 
   #if !(PIN_EXISTS(NEOPIXEL) && NEOPIXEL_PIXELS > 0)
1105 
-    #error "NEOPIXEL_RGBW_LED requires NEOPIXEL_PIN and NEOPIXEL_PIXELS."
1107 
+    #error "NEOPIXEL_LED requires NEOPIXEL_PIN and NEOPIXEL_PIXELS."
1106 
   #endif
 1108 
   #endif
1107 
-#elif ENABLED(PRINTER_EVENT_LEDS) && DISABLED(BLINKM) && DISABLED(PCA9632) && DISABLED(NEOPIXEL_RGBW_LED)
1108 
-  #error "PRINTER_EVENT_LEDS requires BLINKM, PCA9632, RGB_LED, RGBW_LED or NEOPIXEL_RGBW_LED."
1109 
+#elif ENABLED(PRINTER_EVENT_LEDS) && DISABLED(BLINKM) && DISABLED(PCA9632) && DISABLED(NEOPIXEL_LED)
1110 
+  #error "PRINTER_EVENT_LEDS requires BLINKM, PCA9632, RGB_LED, RGBW_LED or NEOPIXEL_LED."
1109 
 #endif
 1111 
 #endif
1110
1112
1111 
 /**
 1113 
 /**

Write Preview
Loading…
Cancel
Save