Space out array values

Marlin/example_configurations/Cartesio/Configuration.h

  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {71.128,71.128,640,152}
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 71.128, 71.128, 640, 152 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {200,200,20,20}   // (mm/sec)
+#define DEFAULT_MAX_FEEDRATE          { 200, 200, 20, 20 }   // (mm/sec)
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {1000,1000,100,10000}
+#define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 100, 10000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s

Marlin/example_configurations/Felix/Configuration.h

  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {76.190476, 76.190476, 1600, 164}
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 76.190476, 76.190476, 1600, 164 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {500, 500, 5, 25}
+#define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {5000,5000,100,80000}
+#define DEFAULT_MAX_ACCELERATION      { 5000, 5000, 100, 80000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s

Marlin/example_configurations/Felix/DUAL/Configuration.h

  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {76.190476, 76.190476, 1600, 164}
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 76.190476, 76.190476, 1600, 164 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {500, 500, 5, 25}
+#define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {5000,5000,100,80000}
+#define DEFAULT_MAX_ACCELERATION      { 5000, 5000, 100, 80000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s

Marlin/example_configurations/Hephestos/Configuration.h

  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {80,80,4000,100.47095761381482}
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 100.47095761381482 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {200, 200, 3.3, 25}
+#define DEFAULT_MAX_FEEDRATE          { 200, 200, 3.3, 25 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {1100,1100,100,10000}
+#define DEFAULT_MAX_ACCELERATION      { 1100, 1100, 100, 10000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s

Marlin/example_configurations/Hephestos_2/Configuration.h

  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {160, 160, 8000, 210.02}
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 160, 160, 8000, 210.02 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {250, 250, 2, 200}
+#define DEFAULT_MAX_FEEDRATE          { 250, 250, 2, 200 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {1000, 1000, 20, 1000}
+#define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 20, 1000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s

Marlin/example_configurations/K8200/Configuration.h

  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {64.25,64.25,2560,600}  // default steps per unit for K8200
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 64.25, 64.25, 2560, 600 }  // default steps per unit for K8200
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {500, 500, 5, 500}
+#define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 500 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {9000,9000,100,10000}
+#define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s

Marlin/example_configurations/K8400/Configuration.h

  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {134.74,134.74,4266.66,148.7}
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 134.74, 134.74, 4266.66, 148.7 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {160, 160, 10, 10000}
+#define DEFAULT_MAX_FEEDRATE          { 160, 160, 10, 10000 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {9000,9000,100,10000}
+#define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s

Marlin/example_configurations/K8400/Dual-head/Configuration.h

  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {134.74,134.74,4266.66,148.7}
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 134.74, 134.74, 4266.66, 148.7 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {160, 160, 10, 10000}
+#define DEFAULT_MAX_FEEDRATE          { 160, 160, 10, 10000 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {9000,9000,100,10000}
+#define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {300, 300, 5, 25}
+#define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {3000,3000,100,10000}
+#define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s

Marlin/example_configurations/RigidBot/Configuration.h

  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {44.3090, 22.1545, 1600, 53.5}  // default steps per unit for RigidBot with standard hardware
-                                                                      // default steps for 16-tooth pulleys {100.06,50.06,1600,76},  HPX2-MAX E=504, RigidBot E=53.5, Peter Stoneham's=76
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 44.3090, 22.1545, 1600, 53.5 }  // default steps per unit for RigidBot with standard hardware
+                                                                        // default steps for 16-tooth pulleys { 100.06, 50.06, 1600, 76 }, HPX2-MAX E=504, RigidBot E=53.5, Peter Stoneham's=76
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {500, 500, 5, 25}
+#define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {800, 800, 100, 10000}
+#define DEFAULT_MAX_ACCELERATION      { 800, 800, 100, 10000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s

Marlin/example_configurations/SCARA/Configuration.h

  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {300, 300, 30, 25}
+#define DEFAULT_MAX_FEEDRATE          { 300, 300, 30, 25 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {300,300,20,1000}
+#define DEFAULT_MAX_ACCELERATION      { 300, 300, 20, 1000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s

Marlin/example_configurations/TAZ4/Configuration.h

  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {100.5,100.5,400,850}
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 100.5, 100.5, 400, 850 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {800, 800, 8, 50}
+#define DEFAULT_MAX_FEEDRATE          { 800, 800, 8, 50 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {9000,9000,100,10000}
+#define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s

Marlin/example_configurations/WITBOX/Configuration.h

  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {350, 350, 7.2, 80}
+#define DEFAULT_MAX_FEEDRATE          { 350, 350, 7.2, 80 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {1000,1000,10,1000}
+#define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 10, 1000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s

Marlin/example_configurations/adafruit/ST7565/Configuration.h

  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {80,80,4000,500}
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {300, 300, 5, 25}
+#define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {3000,3000,100,10000}
+#define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s

Marlin/example_configurations/delta/biv2.5/Configuration.h

  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {72.9, 72.9, 72.9, 291}  // default steps per unit for BI v2.5 (cable drive)
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 72.9, 72.9, 72.9, 291 }  // default steps per unit for BI v2.5 (cable drive)
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {500, 500, 500, 150}
+#define DEFAULT_MAX_FEEDRATE          { 500, 500, 500, 150 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {9000,9000,9000,10000}
+#define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 9000, 10000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s

Marlin/example_configurations/delta/generic/Configuration.h

  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {500, 500, 500, 25}
+#define DEFAULT_MAX_FEEDRATE          { 500, 500, 500, 25 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {9000,9000,9000,10000}
+#define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 9000, 10000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s

Marlin/example_configurations/delta/kossel_mini/Configuration.h

  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {500, 500, 500, 25}
+#define DEFAULT_MAX_FEEDRATE          { 500, 500, 500, 25 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {9000,9000,9000,10000}
+#define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 9000, 10000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s

Marlin/example_configurations/delta/kossel_pro/Configuration.h

  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {200, 200, 200, 200}
+#define DEFAULT_MAX_FEEDRATE          { 200, 200, 200, 200 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {9000,9000,9000,9000}
+#define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 9000, 9000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s

Marlin/example_configurations/delta/kossel_xl/Configuration.h

  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {200, 200, 200, 25}
+#define DEFAULT_MAX_FEEDRATE          { 200, 200, 200, 25 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {9000,9000,9000,10000}    // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot.
+#define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 9000, 10000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s

Marlin/example_configurations/makibox/Configuration.h

  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {400, 400, 400, 163}     // default steps per unit for ***** MakiBox A6 *****
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 400, 400, 400, 163 }     // default steps per unit for ***** MakiBox A6 *****
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {60, 60, 20, 45}
+#define DEFAULT_MAX_FEEDRATE          { 60, 60, 20, 45 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {2000,2000,30,10000}
+#define DEFAULT_MAX_ACCELERATION      { 2000, 2000, 30, 10000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s

Marlin/example_configurations/makibox/Configuration_adv.h

 // Number of channels available for I2C digipot, For Azteeg X3 Pro we have 8
 #define DIGIPOT_I2C_NUM_CHANNELS 4
 // actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
-#define DIGIPOT_I2C_MOTOR_CURRENTS {1.7, 1.7, 1.7, 1.7}
+#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.7, 1.7, 1.7, 1.7 }
 
 //===========================================================================
 //=============================Additional Features===========================

Marlin/example_configurations/tvrrug/Round2/Configuration.h

  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {71.1, 71.1, 2560, 600} // David TVRR
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 71.1, 71.1, 2560, 600 } // David TVRR
 
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   {79.87, 79.87, 2566, 563,78} // Al's TVRR
-//#define DEFAULT_AXIS_STEPS_PER_UNIT   {81.26, 80.01, 2561, 599.14} // Michel TVRR old
-//#define DEFAULT_AXIS_STEPS_PER_UNIT   {71.1, 71.1, 2560, 739.65} // Michel TVRR
+//#define DEFAULT_AXIS_STEPS_PER_UNIT   { 81.26, 80.01, 2561, 599.14 } // Michel TVRR old
+//#define DEFAULT_AXIS_STEPS_PER_UNIT   { 71.1, 71.1, 2560, 739.65 } // Michel TVRR
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          {500, 500, 5, 45} // David TVRR
+#define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 45 } // David TVRR
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
  *
  * Maximum start speed for accelerated moves: { X, Y, Z, E }
  */
-#define DEFAULT_MAX_ACCELERATION      {9000,9000,100,10000}
+#define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 
 /* MICHEL: This has an impact on the "ripples" in print walls */
 

Marlin/pins_PRINTRBOARD_REVF.h

 // uncomment to enable an I2C based DAC like on the Printrboard REVF
 #define DAC_STEPPER_CURRENT
 // Number of channels available for DAC, For Printrboar REVF there are 4
-#define DAC_STEPPER_ORDER {3,2,1,0}
+#define DAC_STEPPER_ORDER { 3, 2, 1, 0 }
 
 #define DAC_STEPPER_SENSE    0.11
 #define DAC_STEPPER_ADDRESS  0

Marlin/pins_RIGIDBOARD_V2.h

 // I2C based DAC like on the Printrboard REVF
 #define DAC_STEPPER_CURRENT
 // Channels available for DAC, For Rigidboard there are 4
-#define DAC_STEPPER_ORDER {0,1,2,3}
+#define DAC_STEPPER_ORDER { 0, 1, 2, 3 }
 
 #define DAC_STEPPER_SENSE    0.11
 #define DAC_STEPPER_ADDRESS  0