Prettier BLTouch menu items (#18682)

Marlin/Configuration_adv.h

@@ -645,8 +645,8 @@
    * Do not activate settings that the probe might not understand. Clones might misunderstand
    * advanced commands.
    *
-   * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
-   *       check the wiring of the BROWN, RED and ORANGE wires.
+   * Note: If the probe is not deploying, do a "Reset" and "Self-Test" and then check the
+   *       wiring of the BROWN, RED and ORANGE wires.
    *
    * Note: If the trigger signal of your probe is not being recognized, it has been very often
    *       because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"

Marlin/src/lcd/language/language_en.h

@@ -414,14 +414,14 @@ namespace Language_en {
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Z Probe Past Bed");
   PROGMEM Language_Str MSG_SKEW_FACTOR                     = _UxGT("Skew Factor");
   PROGMEM Language_Str MSG_BLTOUCH                         = _UxGT("BLTouch");
-  PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("Cmd: Self-Test");
-  PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Cmd: Reset");
-  PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("Cmd: Stow");
-  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("Cmd: Deploy");
-  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("Cmd: SW-Mode");
-  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("Cmd: 5V-Mode");
-  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("Cmd: OD-Mode");
-  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("Cmd: Mode-Store");
+  PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("Self-Test");
+  PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Reset");
+  PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("Stow");
+  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("Deploy");
+  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("SW-Mode");
+  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("5V-Mode");
+  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("OD-Mode");
+  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("Mode-Store");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V           = _UxGT("Set BLTouch to 5V");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD           = _UxGT("Set BLTouch to OD");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO               = _UxGT("Report Drain");

Marlin/src/lcd/language/language_es.h

@@ -385,14 +385,14 @@ namespace Language_es {
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Sonda Z fuera cama");
   PROGMEM Language_Str MSG_SKEW_FACTOR                     = _UxGT("Factor de desviación");
   PROGMEM Language_Str MSG_BLTOUCH                         = _UxGT("BLTouch");
-  PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("Cmd: Auto-Prueba");
-  PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Cmd: Reiniciar");
-  PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("Cmd: Subir pistón");
-  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("Cmd: Bajar pistón");
-  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("Cmd: Modo Software");
-  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("Cmd: Modo 5V");
-  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("Cmd: Modo OD");
-  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("Cmd: Modo almacenar");
+  PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("Auto-Prueba");
+  PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Reiniciar");
+  PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("Subir pistón");
+  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("Bajar pistón");
+  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("Modo Software");
+  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("Modo 5V");
+  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("Modo OD");
+  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("Modo almacenar");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V           = _UxGT("Poner BLTouch a 5V");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD           = _UxGT("Poner BLTouch a OD");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO               = _UxGT("Informe de drenaje");

Marlin/src/lcd/language/language_fr.h

@@ -372,13 +372,13 @@ namespace Language_fr {
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Sonde Z hors lit");
   PROGMEM Language_Str MSG_SKEW_FACTOR                     = _UxGT("Facteur écart");
   PROGMEM Language_Str MSG_BLTOUCH                         = _UxGT("BLTouch");
-  PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("Cmd: Self-Test");
-  PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Cmd: Reset");
-  PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("Cmd: Ranger");
-  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("Cmd: Déployer");
-  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("Cmd: Mode SW");
-  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("Cmd: Mode 5V");
-  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("Cmd: Mode OD");
+  PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("Self-Test");
+  PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Reset");
+  PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("Ranger");
+  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("Déployer");
+  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("Mode SW");
+  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("Mode 5V");
+  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("Mode OD");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("Appliquer Mode");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V           = _UxGT("Mise en 5V");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD           = _UxGT("Mise en OD");

Marlin/src/lcd/language/language_gl.h

@@ -407,14 +407,14 @@ namespace Language_gl {
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Sonda-Z fóra Cama");
   PROGMEM Language_Str MSG_SKEW_FACTOR                     = _UxGT("Factor de Desviación");
   PROGMEM Language_Str MSG_BLTOUCH                         = _UxGT("BLTouch");
-  PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("Cmd: Auto-Test");
-  PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Cmd: Reiniciar");
-  PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("Cmd: Recoller");
-  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("Cmd: Estender");
-  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("Cmd: Modo Software");
-  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("Cmd: Modo 5V");
-  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("Cmd: Modo OD");
-  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("Cmd: Modo Almacenar");
+  PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("Auto-Test");
+  PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Reiniciar");
+  PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("Recoller");
+  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("Estender");
+  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("Modo Software");
+  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("Modo 5V");
+  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("Modo OD");
+  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("Modo Almacenar");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V           = _UxGT("Axustar BLTouch a 5V");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD           = _UxGT("Axustar BLTouch a OD");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO               = _UxGT("Modo de Informe");

Marlin/src/lcd/language/language_hu.h

@@ -409,14 +409,14 @@ namespace Language_hu {
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Z szonda tálcán kivül");
   PROGMEM Language_Str MSG_SKEW_FACTOR                     = _UxGT("Ferdeség Faktor");
   PROGMEM Language_Str MSG_BLTOUCH                         = _UxGT("BLTouch");
-  PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("Cmd: Önteszt");
-  PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Cmd: Visszaállítás");
-  PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("Cmd: Elhelyez");
-  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("Cmd: Telepít");
-  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("Cmd: SW-Mód");
-  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("Cmd: 5V-Mód");
-  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("Cmd: OD-Mód");
-  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("Cmd: Módok");
+  PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("Önteszt");
+  PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Visszaállítás");
+  PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("Elhelyez");
+  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("Telepít");
+  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("SW-Mód");
+  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("5V-Mód");
+  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("OD-Mód");
+  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("Módok");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V           = _UxGT("BLTouch 5V Mód");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD           = _UxGT("BLTouch OD Mód");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO               = _UxGT("Jelentés");

Marlin/src/lcd/language/language_pl.h

@@ -360,12 +360,12 @@ namespace Language_pl {
   PROGMEM Language_Str MSG_BLTOUCH                         = _UxGT("BLTouch");
   PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("BLTouch Self-Test");
   PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Reset BLTouch");
-  PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("Cmd: Stow");
-  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("Cmd: Deploy");
-  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("Cmd: SW-Mode");
-  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("Cmd: 5V-Mode");
-  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("Cmd: OD-Mode");
-  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("Cmd: Mode-Store");
+  PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("Stow");
+  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("Deploy");
+  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("SW-Mode");
+  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("5V-Mode");
+  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("OD-Mode");
+  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("Mode-Store");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V           = _UxGT("Set BLTouch to 5V");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD           = _UxGT("Set BLTouch to OD");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO               = _UxGT("Report Drain");

Marlin/src/lcd/language/language_ro.h

@@ -412,14 +412,14 @@ namespace Language_ro {
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Z Probe Past Bed");
   PROGMEM Language_Str MSG_SKEW_FACTOR                     = _UxGT("Skew Factor");
   PROGMEM Language_Str MSG_BLTOUCH                         = _UxGT("BLTouch");
-  PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("Cmd: Self-Test");
-  PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Cmd: Reset");
-  PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("Cmd: Stow");
-  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("Cmd: Deploy");
-  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("Cmd: SW-Mode");
-  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("Cmd: 5V-Mode");
-  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("Cmd: OD-Mode");
-  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("Cmd: Mode-Store");
+  PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("Self-Test");
+  PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Reset");
+  PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("Stow");
+  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("Deploy");
+  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("SW-Mode");
+  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("5V-Mode");
+  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("OD-Mode");
+  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("Mode-Store");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V           = _UxGT("Set BLTouch to 5V");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD           = _UxGT("Set BLTouch to OD");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO               = _UxGT("Report Drain");

Marlin/src/lcd/language/language_sk.h

@@ -400,14 +400,14 @@ namespace Language_sk {
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Sonda Z mimo podl.");
   PROGMEM Language_Str MSG_SKEW_FACTOR                     = _UxGT("Faktor skosenia");
   PROGMEM Language_Str MSG_BLTOUCH                         = _UxGT("BLTouch");
-  PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("Cmd: Self-Test");
-  PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Cmd: Reset");
-  PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("Cmd: Zasunúť");
-  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("Cmd: Vysunúť");
-  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("Cmd: Režim SW");
-  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("Cmd: Režim 5V");
-  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("Cmd: Režim OD");
-  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("Cmd: Ulož. režim");
+  PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("Self-Test");
+  PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Reset");
+  PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("Zasunúť");
+  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("Vysunúť");
+  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("Režim SW");
+  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("Režim 5V");
+  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("Režim OD");
+  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("Ulož. režim");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V           = _UxGT("Prepnúť do 5V");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD           = _UxGT("Prepnúť do OD");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO               = _UxGT("Zobraziť režim");

Marlin/src/lcd/language/language_tr.h

@@ -385,13 +385,13 @@ namespace Language_tr {
   PROGMEM Language_Str MSG_SKEW_FACTOR                     = _UxGT("Çarpıklık Faktörü");
   PROGMEM Language_Str MSG_BLTOUCH                         = _UxGT("BLTouch");
   PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("BLTouch K. Test");
-  PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Cmd: Reset");
-  PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("Cmd: Kapat");
-  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("Cmd: Aç");
-  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("Cmd: SW-Modu");
-  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("Cmd: 5V-Modu");
-  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("Cmd: OD-Modu");
-  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("Cmd: Mode-Store");
+  PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Reset");
+  PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("Kapat");
+  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("Aç");
+  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("SW-Modu");
+  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("5V-Modu");
+  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("OD-Modu");
+  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("Mode-Store");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V           = _UxGT("BLTouch 5V Ayarla");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD           = _UxGT("BLTouch OD Ayarla");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO               = _UxGT("Drenaj Raporu");

Marlin/src/lcd/language/language_zh_CN.h

@@ -411,14 +411,14 @@ namespace Language_zh_CN {
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Z探针在热床之外");     //"Z probe out. bed" Z probe is not within the physical limits
   PROGMEM Language_Str MSG_SKEW_FACTOR                     = _UxGT("偏斜因数");     // "Skew Factor"
   PROGMEM Language_Str MSG_BLTOUCH                         = _UxGT("BLTouch");     // "BLTouch"
-  PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("Cmd: 自检");
-  PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("Cmd: 重置");
-  PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("Cmd: 装载");
-  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("Cmd: 部署");
-  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("Cmd: SW模式");
-  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("Cmd: 5V模式");
-  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("Cmd: OD模式");
-  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("Cmd: 模式保存");
+  PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("自检");
+  PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("重置");
+  PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("装载");
+  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("部署");
+  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("SW模式");
+  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("5V模式");
+  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("OD模式");
+  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("模式保存");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V           = _UxGT("设置BLTouch为5V");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD           = _UxGT("设置BLTouch为OD");
   PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO               = _UxGT("报告Drain");