✨ MKS Eagle (STM32F407VET6) board (#22897)

Marlin/src/core/boards.h

@@ -402,6 +402,7 @@
 #define BOARD_TH3D_EZBOARD_LITE_V2    4232  // TH3D EZBoard Lite v2.0
 #define BOARD_INDEX_REV03             4233  // Index PnP Controller REV03 (STM32F407VET6/VGT6)
 #define BOARD_MKS_ROBIN_NANO_V1_3_F4  4234  // MKS Robin Nano V1.3 and MKS Robin Nano-S V1.3 (STM32F407VET6)
+#define BOARD_MKS_EAGLE               4235  // MKS Eagle (STM32F407VET6)
 
 //
 // ARM Cortex M7

Marlin/src/pins/pins.h

@@ -651,6 +651,8 @@
   #include "stm32f4/pins_INDEX_REV03.h"         // STM32F4                                env:Index_Mobo_Rev03
 #elif MB(MKS_ROBIN_NANO_V1_3_F4)
   #include "stm32f4/pins_MKS_ROBIN_NANO_V1_3_F4.h" // STM32F4                             env:mks_robin_nano_v1_3_f4
+#elif MB(MKS_EAGLE)
+  #include "stm32f4/pins_MKS_EAGLE.h"           // STM32F4                                env:mks_eagle
 
 //
 // ARM Cortex M7

Marlin/src/pins/stm32f4/pins_MKS_EAGLE.h

@@ -0,0 +1,35 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#define ALLOW_STM32DUINO
+#include "env_validate.h"
+
+#if HOTENDS > 2 || E_STEPPERS > 2
+  #error "MKS Eagle supports up to 2 hotends / E-steppers."
+#elif HAS_FSMC_TFT
+  #error "MKS Eagle doesn't support FSMC-based TFT displays."
+#endif
+
+#define BOARD_INFO_NAME "MKS Eagle"
+
+#include "pins_MKS_ROBIN_NANO_V3_common.h"

Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h

@@ -32,80 +32,22 @@
 
 #define BOARD_INFO_NAME "MKS Robin Nano V3"
 
-// USB Flash Drive support
-#define HAS_OTG_USB_HOST_SUPPORT
-
-// Avoid conflict with TIMER_TONE
-#define STEP_TIMER                            10
-
-// Use one of these or SDCard-based Emulation will be used
-//#define SRAM_EEPROM_EMULATION                   // Use BackSRAM-based EEPROM emulation
-//#define FLASH_EEPROM_EMULATION                  // Use Flash-based EEPROM emulation
-#if EITHER(NO_EEPROM_SELECTED, I2C_EEPROM)
-  #define I2C_EEPROM
-  #define MARLIN_EEPROM_SIZE              0x1000  // 4KB
-  #define I2C_SCL_PIN                       PB6
-  #define I2C_SDA_PIN                       PB7
-#endif
-
-//
-// Release PB4 (Z_DIR_PIN) from JTAG NRST role
-//
-//#define DISABLE_DEBUG
-
-//
-// Servos
-//
-#define SERVO0_PIN                          PA8   // Enable BLTOUCH
-
-//
-// Limit Switches
-//
-#define X_DIAG_PIN                          PA15
-#define Y_DIAG_PIN                          PD2
-#define Z_DIAG_PIN                          PC8
-#define E0_DIAG_PIN                         PC4
-#define E1_DIAG_PIN                         PE7
-
-#define X_STOP_PIN                    X_DIAG_PIN
-#define Y_STOP_PIN                    Y_DIAG_PIN
-#define Z_MIN_PIN                     Z_DIAG_PIN
-#define Z_MAX_PIN                    E0_DIAG_PIN
-
-//
-// Steppers
-//
-#define X_ENABLE_PIN                        PE4
-#define X_STEP_PIN                          PE3
-#define X_DIR_PIN                           PE2
 #ifndef X_CS_PIN
   #define X_CS_PIN                          PD5
 #endif
 
-#define Y_ENABLE_PIN                        PE1
-#define Y_STEP_PIN                          PE0
-#define Y_DIR_PIN                           PB9
 #ifndef Y_CS_PIN
   #define Y_CS_PIN                          PD7
 #endif
 
-#define Z_ENABLE_PIN                        PB8
-#define Z_STEP_PIN                          PB5
-#define Z_DIR_PIN                           PB4
 #ifndef Z_CS_PIN
   #define Z_CS_PIN                          PD4
 #endif
 
-#define E0_ENABLE_PIN                       PB3
-#define E0_STEP_PIN                         PD6
-#define E0_DIR_PIN                          PD3
 #ifndef E0_CS_PIN
   #define E0_CS_PIN                         PD9
 #endif
 
-#define E1_ENABLE_PIN                       PA3
-#define E1_STEP_PIN                         PD15
-#define E1_DIR_PIN                          PA1
 #ifndef E1_CS_PIN
   #define E1_CS_PIN                         PD8
 #endif
@@ -129,287 +71,4 @@
   #endif
 #endif
 
-#if HAS_TMC_UART
-  //
-  // Software serial
-  // No Hardware serial for steppers
-  //
-  #define X_SERIAL_TX_PIN                   PD5
-  #define X_SERIAL_RX_PIN        X_SERIAL_TX_PIN
-
-  #define Y_SERIAL_TX_PIN                   PD7
-  #define Y_SERIAL_RX_PIN        Y_SERIAL_TX_PIN
-
-  #define Z_SERIAL_TX_PIN                   PD4
-  #define Z_SERIAL_RX_PIN        Z_SERIAL_TX_PIN
-
-  #define E0_SERIAL_TX_PIN                  PD9
-  #define E0_SERIAL_RX_PIN      E0_SERIAL_TX_PIN
-
-  #define E1_SERIAL_TX_PIN                  PD8
-  #define E1_SERIAL_RX_PIN      E1_SERIAL_TX_PIN
-
-  // Reduce baud rate to improve software serial reliability
-  #define TMC_BAUD_RATE                    19200
-#endif
-
-//
-// Temperature Sensors
-//
-#define TEMP_0_PIN                          PC1   // TH1
-#define TEMP_1_PIN                          PA2   // TH2
-#define TEMP_BED_PIN                        PC0   // TB1
-
-//
-// Heaters / Fans
-//
-#define HEATER_0_PIN                        PE5   // HEATER1
-#define HEATER_1_PIN                        PB0   // HEATER2
-#define HEATER_BED_PIN                      PA0   // HOT BED
-
-#define FAN_PIN                             PC14  // FAN
-#define FAN1_PIN                            PB1   // FAN1
-
-//
-// Thermocouples
-//
-//#define TEMP_0_CS_PIN             HEATER_0_PIN  // TC1 - CS1
-//#define TEMP_0_CS_PIN             HEATER_1_PIN  // TC2 - CS2
-
-//
-// Misc. Functions
-//
-#if HAS_TFT_LVGL_UI
-  #define MT_DET_1_PIN                      PA4   // MT_DET
-  #define MT_DET_2_PIN                      PE6
-  #define MT_DET_PIN_STATE                  LOW
-#endif
-
-#ifndef FIL_RUNOUT_PIN
-  #define FIL_RUNOUT_PIN            MT_DET_1_PIN
-#endif
-#ifndef FIL_RUNOUT2_PIN
-  #define FIL_RUNOUT2_PIN           MT_DET_2_PIN
-#endif
-
-#ifndef POWER_LOSS_PIN
-  #define POWER_LOSS_PIN                    PA13  // PW_DET
-#endif
-
-//#define SUICIDE_PIN                       PB2
-//#define LED_PIN                           PB2
-//#define KILL_PIN                          PA2
-//#define KILL_PIN_STATE                    LOW
-
-//
-// Power Supply Control
-//
-#if ENABLED(MKS_PWC)
-  #if ENABLED(TFT_LVGL_UI)
-    #undef PSU_CONTROL
-    #undef MKS_PWC
-    #define SUICIDE_PIN                     PB2
-    #define SUICIDE_PIN_STATE               LOW
-  #else
-    #define PS_ON_PIN                       PB2   // PW_OFF
-  #endif
-  #define KILL_PIN                          PA13  // PW_DET
-  #define KILL_PIN_STATE                    HIGH
-#endif
-
-// Random Info
-#define USB_SERIAL              -1  // USB Serial
-#define WIFI_SERIAL              3  // USART3
-#define MKS_WIFI_MODULE_SERIAL   1  // USART1
-#define MKS_WIFI_MODULE_SPI      2  // SPI2
-
-#ifndef SDCARD_CONNECTION
-  #define SDCARD_CONNECTION              ONBOARD
-#endif
-
-// MKS WIFI MODULE
-#if ENABLED(MKS_WIFI_MODULE)
-  #define WIFI_IO0_PIN                      PC13
-  #define WIFI_IO1_PIN                      PC7
-  #define WIFI_RESET_PIN                    PE9
-#endif
-
-// MKS TEST
-#if ENABLED(MKS_TEST)
-  #define MKS_TEST_POWER_LOSS_PIN           PA13  // PW_DET
-  #define MKS_TEST_PS_ON_PIN                PB2   // PW_OFF
-#endif
-
-//
-// Onboard SD card
-//
-// detect pin doesn't work when ONBOARD and NO_SD_HOST_DRIVE disabled
-#if SD_CONNECTION_IS(ONBOARD)
-  #define ENABLE_SPI3
-  #define SD_SS_PIN                         -1
-  #define SDSS                              PC9
-  #define SD_SCK_PIN                        PC10
-  #define SD_MISO_PIN                       PC11
-  #define SD_MOSI_PIN                       PC12
-  #define SD_DETECT_PIN                     PD12
-#endif
-
-#define SPI_FLASH
-#if ENABLED(SPI_FLASH)
-  #define HAS_SPI_FLASH                        1
-  #define SPI_DEVICE                           2
-  #define SPI_FLASH_SIZE               0x1000000
-  #define SPI_FLASH_CS_PIN                  PB12
-  #define SPI_FLASH_MOSI_PIN                PC3
-  #define SPI_FLASH_MISO_PIN                PC2
-  #define SPI_FLASH_SCK_PIN                 PB13
-#endif
-
-/**
- *                ------                                     ------
- * (BEEPER)  PC5 |10  9 | PE13 (BTN_ENC)   (SPI1 MISO)  PA6 |10  9 | PA5  (SPI1 SCK)
- * (LCD_EN) PD13 | 8  7 | PC6  (LCD_RS)      (BTN_EN1)  PE8 | 8  7 | PE10 (SPI1 CS)
- * (LCD_D4) PE14   6  5 | PE15 (LCD_D5)      (BTN_EN2) PE11   6  5 | PA7  (SPI1 MOSI)
- * (LCD_D6) PD11 | 4  3 | PD10 (LCD_D7)      (SPI1_RS) PE12 | 4  3 | RESET
- *           GND | 2  1 | 5V                            GND | 2  1 | 3.3V
- *                ------                                     ------
- *                 EXP1                                       EXP2
- */
-#define EXP1_03_PIN                         PD10
-#define EXP1_04_PIN                         PD11
-#define EXP1_05_PIN                         PE15
-#define EXP1_06_PIN                         PE14
-#define EXP1_07_PIN                         PC6
-#define EXP1_08_PIN                         PD13
-#define EXP1_09_PIN                         PE13
-#define EXP1_10_PIN                         PC5
-
-#define EXP2_03_PIN                         -1    // RESET
-#define EXP2_04_PIN                         PE12
-#define EXP2_05_PIN                         PA7
-#define EXP2_06_PIN                         PE11
-#define EXP2_07_PIN                         PE10
-#define EXP2_08_PIN                         PE8
-#define EXP2_09_PIN                         PA5
-#define EXP2_10_PIN                         PA6
-
-//
-// SPI SD Card
-//
-#if SD_CONNECTION_IS(LCD)
-  #define ENABLE_SPI1
-  #define SDSS                       EXP2_07_PIN
-  #define SD_SCK_PIN                 EXP2_09_PIN
-  #define SD_MISO_PIN                EXP2_10_PIN
-  #define SD_MOSI_PIN                EXP2_05_PIN
-  #define SD_DETECT_PIN              EXP2_04_PIN
-#endif
-
-//
-// LCD / Controller
-//
-#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI)
-  #define TFT_CS_PIN                 EXP1_04_PIN
-  #define TFT_SCK_PIN                EXP2_09_PIN
-  #define TFT_MISO_PIN               EXP2_10_PIN
-  #define TFT_MOSI_PIN               EXP2_05_PIN
-  #define TFT_DC_PIN                 EXP1_03_PIN
-  #define TFT_RST_PIN                EXP1_07_PIN
-  #define TFT_A0_PIN                  TFT_DC_PIN
-
-  #define TFT_RESET_PIN              EXP1_07_PIN
-  #define TFT_BACKLIGHT_PIN          EXP1_08_PIN
-
-  #define TOUCH_BUTTONS_HW_SPI
-  #define TOUCH_BUTTONS_HW_SPI_DEVICE          1
-
-  #define LCD_BACKLIGHT_PIN          EXP1_08_PIN
-  #ifndef TFT_WIDTH
-    #define TFT_WIDTH                        480
-  #endif
-  #ifndef TFT_HEIGHT
-    #define TFT_HEIGHT                       320
-  #endif
-
-  #define TOUCH_CS_PIN               EXP1_06_PIN  // SPI1_NSS
-  #define TOUCH_SCK_PIN              EXP2_09_PIN  // SPI1_SCK
-  #define TOUCH_MISO_PIN             EXP2_10_PIN  // SPI1_MISO
-  #define TOUCH_MOSI_PIN             EXP2_05_PIN  // SPI1_MOSI
-
-  #define LCD_READ_ID                       0xD3
-  #define LCD_USE_DMA_SPI
-
-  #define TFT_BUFFER_SIZE                  14400
-
-  #ifndef TOUCH_CALIBRATION_X
-    #define TOUCH_CALIBRATION_X           -17253
-  #endif
-  #ifndef TOUCH_CALIBRATION_Y
-    #define TOUCH_CALIBRATION_Y            11579
-  #endif
-  #ifndef TOUCH_OFFSET_X
-    #define TOUCH_OFFSET_X                   514
-  #endif
-  #ifndef TOUCH_OFFSET_Y
-    #define TOUCH_OFFSET_Y                   -24
-  #endif
-  #ifndef TOUCH_ORIENTATION
-    #define TOUCH_ORIENTATION    TOUCH_LANDSCAPE
-  #endif
-
-#elif HAS_WIRED_LCD
-
-  #define LCD_PINS_ENABLE            EXP1_08_PIN
-  #define LCD_PINS_RS                EXP1_07_PIN
-  #define LCD_BACKLIGHT_PIN                 -1
-
-  // MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
-  #if ENABLED(MKS_MINI_12864)
-    //#define LCD_BACKLIGHT_PIN             -1
-    //#define LCD_RESET_PIN                 -1
-    #define DOGLCD_A0                EXP1_04_PIN
-    #define DOGLCD_CS                EXP1_05_PIN
-    //#define DOGLCD_SCK             EXP2_09_PIN
-    //#define DOGLCD_MOSI            EXP2_05_PIN
-
-    // Required for MKS_MINI_12864 with this board
-    //#define MKS_LCD12864B
-    //#undef SHOW_BOOTSCREEN
-
-  #elif ENABLED(MKS_MINI_12864_V3)
-    #define DOGLCD_CS                EXP1_08_PIN
-    #define DOGLCD_A0                EXP1_07_PIN
-    #define LCD_PINS_DC                DOGLCD_A0
-    #define LCD_BACKLIGHT_PIN               -1
-    #define LCD_RESET_PIN            EXP1_06_PIN
-    #define NEOPIXEL_PIN             EXP1_05_PIN
-    #define DOGLCD_MOSI              EXP2_05_PIN
-    #define DOGLCD_SCK               EXP2_09_PIN
-    #if SD_CONNECTION_IS(ONBOARD)
-      #define FORCE_SOFT_SPI
-    #endif
-    //#define LCD_SCREEN_ROT_180
-
-  #else                                           // !MKS_MINI_12864
-
-    #define LCD_PINS_D4              EXP1_06_PIN
-    #if ENABLED(ULTIPANEL)
-      #define LCD_PINS_D5            EXP1_05_PIN
-      #define LCD_PINS_D6            EXP1_04_PIN
-      #define LCD_PINS_D7            EXP1_03_PIN
-    #endif
-
-    #define BOARD_ST7920_DELAY_1              96
-    #define BOARD_ST7920_DELAY_2              48
-    #define BOARD_ST7920_DELAY_3             600
-
-  #endif // !MKS_MINI_12864
-
-#endif // HAS_WIRED_LCD
-
-#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI, HAS_WIRED_LCD)
-  #define BEEPER_PIN                 EXP1_10_PIN
-  #define BTN_EN1                    EXP2_08_PIN
-  #define BTN_EN2                    EXP2_06_PIN
-  #define BTN_ENC                    EXP1_09_PIN
-#endif
+#include "pins_MKS_ROBIN_NANO_V3_common.h"

Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3_common.h

@@ -0,0 +1,375 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#pragma once
+
+//
+// MKS Robin Nano V3, MKS Eagle pinmap
+//
+
+// USB Flash Drive support
+#define HAS_OTG_USB_HOST_SUPPORT
+
+// Avoid conflict with TIMER_TONE
+#define STEP_TIMER                            10
+
+// Use one of these or SDCard-based Emulation will be used
+//#define SRAM_EEPROM_EMULATION                   // Use BackSRAM-based EEPROM emulation
+//#define FLASH_EEPROM_EMULATION                  // Use Flash-based EEPROM emulation
+#if EITHER(NO_EEPROM_SELECTED, I2C_EEPROM)
+  #define I2C_EEPROM
+  #define MARLIN_EEPROM_SIZE              0x1000  // 4KB
+  #define I2C_SCL_PIN                       PB6
+  #define I2C_SDA_PIN                       PB7
+#endif
+
+//
+// Release PB4 (Z_DIR_PIN) from JTAG NRST role
+//
+//#define DISABLE_DEBUG
+
+//
+// Servos
+//
+#define SERVO0_PIN                          PA8   // Enable BLTOUCH
+
+//
+// Limit Switches
+//
+#define X_DIAG_PIN                          PA15
+#define Y_DIAG_PIN                          PD2
+#define Z_DIAG_PIN                          PC8
+#define E0_DIAG_PIN                         PC4
+#define E1_DIAG_PIN                         PE7
+
+#define X_STOP_PIN                    X_DIAG_PIN
+#define Y_STOP_PIN                    Y_DIAG_PIN
+#define Z_MIN_PIN                     Z_DIAG_PIN
+#define Z_MAX_PIN                    E0_DIAG_PIN
+
+//
+// Steppers
+//
+#define X_ENABLE_PIN                        PE4
+#define X_STEP_PIN                          PE3
+#define X_DIR_PIN                           PE2
+
+#define Y_ENABLE_PIN                        PE1
+#define Y_STEP_PIN                          PE0
+#define Y_DIR_PIN                           PB9
+
+#define Z_ENABLE_PIN                        PB8
+#define Z_STEP_PIN                          PB5
+#define Z_DIR_PIN                           PB4
+
+#define E0_ENABLE_PIN                       PB3
+#define E0_STEP_PIN                         PD6
+#define E0_DIR_PIN                          PD3
+
+#define E1_ENABLE_PIN                       PA3
+#define E1_STEP_PIN                         PD15
+#define E1_DIR_PIN                          PA1
+
+#if HAS_TMC_UART
+  //
+  // Software serial
+  // No Hardware serial for steppers
+  //
+  #define X_SERIAL_TX_PIN                   PD5
+  #define X_SERIAL_RX_PIN        X_SERIAL_TX_PIN
+
+  #define Y_SERIAL_TX_PIN                   PD7
+  #define Y_SERIAL_RX_PIN        Y_SERIAL_TX_PIN
+
+  #define Z_SERIAL_TX_PIN                   PD4
+  #define Z_SERIAL_RX_PIN        Z_SERIAL_TX_PIN
+
+  #define E0_SERIAL_TX_PIN                  PD9
+  #define E0_SERIAL_RX_PIN      E0_SERIAL_TX_PIN
+
+  #define E1_SERIAL_TX_PIN                  PD8
+  #define E1_SERIAL_RX_PIN      E1_SERIAL_TX_PIN
+
+  // Reduce baud rate to improve software serial reliability
+  #define TMC_BAUD_RATE                    19200
+#endif
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                          PC1   // TH1
+#define TEMP_1_PIN                          PA2   // TH2
+#define TEMP_BED_PIN                        PC0   // TB1
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                        PE5   // HEATER1
+#define HEATER_1_PIN                        PB0   // HEATER2
+#define HEATER_BED_PIN                      PA0   // HOT BED
+
+#define FAN_PIN                             PC14  // FAN
+#define FAN1_PIN                            PB1   // FAN1
+
+//
+// Thermocouples
+//
+//#define TEMP_0_CS_PIN             HEATER_0_PIN  // TC1 - CS1
+//#define TEMP_0_CS_PIN             HEATER_1_PIN  // TC2 - CS2
+
+//
+// Misc. Functions
+//
+#if HAS_TFT_LVGL_UI
+  #define MT_DET_1_PIN                      PA4   // MT_DET
+  #define MT_DET_2_PIN                      PE6
+  #define MT_DET_PIN_STATE                  LOW
+#endif
+
+#ifndef FIL_RUNOUT_PIN
+  #define FIL_RUNOUT_PIN            MT_DET_1_PIN
+#endif
+#ifndef FIL_RUNOUT2_PIN
+  #define FIL_RUNOUT2_PIN           MT_DET_2_PIN
+#endif
+
+#ifndef POWER_LOSS_PIN
+  #define POWER_LOSS_PIN                    PA13  // PW_DET
+#endif
+
+//#define SUICIDE_PIN                       PB2
+//#define LED_PIN                           PB2
+//#define KILL_PIN                          PA2
+//#define KILL_PIN_STATE                    LOW
+
+//
+// Power Supply Control
+//
+#if ENABLED(MKS_PWC)
+  #if ENABLED(TFT_LVGL_UI)
+    #undef PSU_CONTROL
+    #undef MKS_PWC
+    #define SUICIDE_PIN                     PB2
+    #define SUICIDE_PIN_STATE               LOW
+  #else
+    #define PS_ON_PIN                       PB2   // PW_OFF
+  #endif
+  #define KILL_PIN                          PA13  // PW_DET
+  #define KILL_PIN_STATE                    HIGH
+#endif
+
+// Random Info
+#define USB_SERIAL              -1  // USB Serial
+#define WIFI_SERIAL              3  // USART3
+#define MKS_WIFI_MODULE_SERIAL   1  // USART1
+#define MKS_WIFI_MODULE_SPI      2  // SPI2
+
+#ifndef SDCARD_CONNECTION
+  #define SDCARD_CONNECTION              ONBOARD
+#endif
+
+// MKS WIFI MODULE
+#if ENABLED(MKS_WIFI_MODULE)
+  #define WIFI_IO0_PIN                      PC13
+  #define WIFI_IO1_PIN                      PC7
+  #define WIFI_RESET_PIN                    PE9
+#endif
+
+// MKS TEST
+#if ENABLED(MKS_TEST)
+  #define MKS_TEST_POWER_LOSS_PIN           PA13  // PW_DET
+  #define MKS_TEST_PS_ON_PIN                PB2   // PW_OFF
+#endif
+
+//
+// Onboard SD card
+//
+// detect pin doesn't work when ONBOARD and NO_SD_HOST_DRIVE disabled
+#if SD_CONNECTION_IS(ONBOARD)
+  #define ENABLE_SPI3
+  #define SD_SS_PIN                         -1
+  #define SDSS                              PC9
+  #define SD_SCK_PIN                        PC10
+  #define SD_MISO_PIN                       PC11
+  #define SD_MOSI_PIN                       PC12
+  #define SD_DETECT_PIN                     PD12
+#endif
+
+#define SPI_FLASH
+#if ENABLED(SPI_FLASH)
+  #define HAS_SPI_FLASH                        1
+  #define SPI_DEVICE                           2
+  #define SPI_FLASH_SIZE               0x1000000
+  #define SPI_FLASH_CS_PIN                  PB12
+  #define SPI_FLASH_MOSI_PIN                PC3
+  #define SPI_FLASH_MISO_PIN                PC2
+  #define SPI_FLASH_SCK_PIN                 PB13
+#endif
+
+/**
+ *                ------                                     ------
+ * (BEEPER)  PC5 |10  9 | PE13 (BTN_ENC)   (SPI1 MISO)  PA6 |10  9 | PA5  (SPI1 SCK)
+ * (LCD_EN) PD13 | 8  7 | PC6  (LCD_RS)      (BTN_EN1)  PE8 | 8  7 | PE10 (SPI1 CS)
+ * (LCD_D4) PE14   6  5 | PE15 (LCD_D5)      (BTN_EN2) PE11   6  5 | PA7  (SPI1 MOSI)
+ * (LCD_D6) PD11 | 4  3 | PD10 (LCD_D7)      (SPI1_RS) PE12 | 4  3 | RESET
+ *           GND | 2  1 | 5V                            GND | 2  1 | 3.3V
+ *                ------                                     ------
+ *                 EXP1                                       EXP2
+ */
+#define EXP1_03_PIN                         PD10
+#define EXP1_04_PIN                         PD11
+#define EXP1_05_PIN                         PE15
+#define EXP1_06_PIN                         PE14
+#define EXP1_07_PIN                         PC6
+#define EXP1_08_PIN                         PD13
+#define EXP1_09_PIN                         PE13
+#define EXP1_10_PIN                         PC5
+
+#define EXP2_03_PIN                         -1    // RESET
+#define EXP2_04_PIN                         PE12
+#define EXP2_05_PIN                         PA7
+#define EXP2_06_PIN                         PE11
+#define EXP2_07_PIN                         PE10
+#define EXP2_08_PIN                         PE8
+#define EXP2_09_PIN                         PA5
+#define EXP2_10_PIN                         PA6
+
+//
+// SPI SD Card
+//
+#if SD_CONNECTION_IS(LCD)
+  #define ENABLE_SPI1
+  #define SDSS                       EXP2_07_PIN
+  #define SD_SCK_PIN                 EXP2_09_PIN
+  #define SD_MISO_PIN                EXP2_10_PIN
+  #define SD_MOSI_PIN                EXP2_05_PIN
+  #define SD_DETECT_PIN              EXP2_04_PIN
+#endif
+
+//
+// LCD / Controller
+//
+#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI)
+  #define TFT_CS_PIN                 EXP1_04_PIN
+  #define TFT_SCK_PIN                EXP2_09_PIN
+  #define TFT_MISO_PIN               EXP2_10_PIN
+  #define TFT_MOSI_PIN               EXP2_05_PIN
+  #define TFT_DC_PIN                 EXP1_03_PIN
+  #define TFT_RST_PIN                EXP1_07_PIN
+  #define TFT_A0_PIN                  TFT_DC_PIN
+
+  #define TFT_RESET_PIN              EXP1_07_PIN
+  #define TFT_BACKLIGHT_PIN          EXP1_08_PIN
+
+  #define TOUCH_BUTTONS_HW_SPI
+  #define TOUCH_BUTTONS_HW_SPI_DEVICE          1
+
+  #define LCD_BACKLIGHT_PIN          EXP1_08_PIN
+  #ifndef TFT_WIDTH
+    #define TFT_WIDTH                        480
+  #endif
+  #ifndef TFT_HEIGHT
+    #define TFT_HEIGHT                       320
+  #endif
+
+  #define TOUCH_CS_PIN               EXP1_06_PIN  // SPI1_NSS
+  #define TOUCH_SCK_PIN              EXP2_09_PIN  // SPI1_SCK
+  #define TOUCH_MISO_PIN             EXP2_10_PIN  // SPI1_MISO
+  #define TOUCH_MOSI_PIN             EXP2_05_PIN  // SPI1_MOSI
+
+  #define LCD_READ_ID                       0xD3
+  #define LCD_USE_DMA_SPI
+
+  #define TFT_BUFFER_SIZE                  14400
+
+  #ifndef TOUCH_CALIBRATION_X
+    #define TOUCH_CALIBRATION_X           -17253
+  #endif
+  #ifndef TOUCH_CALIBRATION_Y
+    #define TOUCH_CALIBRATION_Y            11579
+  #endif
+  #ifndef TOUCH_OFFSET_X
+    #define TOUCH_OFFSET_X                   514
+  #endif
+  #ifndef TOUCH_OFFSET_Y
+    #define TOUCH_OFFSET_Y                   -24
+  #endif
+  #ifndef TOUCH_ORIENTATION
+    #define TOUCH_ORIENTATION    TOUCH_LANDSCAPE
+  #endif
+
+#elif HAS_WIRED_LCD
+
+  #define LCD_PINS_ENABLE            EXP1_08_PIN
+  #define LCD_PINS_RS                EXP1_07_PIN
+  #define LCD_BACKLIGHT_PIN                 -1
+
+  // MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
+  #if ENABLED(MKS_MINI_12864)
+    //#define LCD_BACKLIGHT_PIN             -1
+    //#define LCD_RESET_PIN                 -1
+    #define DOGLCD_A0                EXP1_04_PIN
+    #define DOGLCD_CS                EXP1_05_PIN
+    //#define DOGLCD_SCK             EXP2_09_PIN
+    //#define DOGLCD_MOSI            EXP2_05_PIN
+
+    // Required for MKS_MINI_12864 with this board
+    //#define MKS_LCD12864B
+    //#undef SHOW_BOOTSCREEN
+
+  #elif ENABLED(MKS_MINI_12864_V3)
+    #define DOGLCD_CS                EXP1_08_PIN
+    #define DOGLCD_A0                EXP1_07_PIN
+    #define LCD_PINS_DC                DOGLCD_A0
+    #define LCD_BACKLIGHT_PIN               -1
+    #define LCD_RESET_PIN            EXP1_06_PIN
+    #define NEOPIXEL_PIN             EXP1_05_PIN
+    #define DOGLCD_MOSI              EXP2_05_PIN
+    #define DOGLCD_SCK               EXP2_09_PIN
+    #if SD_CONNECTION_IS(ONBOARD)
+      #define FORCE_SOFT_SPI
+    #endif
+    //#define LCD_SCREEN_ROT_180
+
+  #else                                           // !MKS_MINI_12864
+
+    #define LCD_PINS_D4              EXP1_06_PIN
+    #if ENABLED(ULTIPANEL)
+      #define LCD_PINS_D5            EXP1_05_PIN
+      #define LCD_PINS_D6            EXP1_04_PIN
+      #define LCD_PINS_D7            EXP1_03_PIN
+    #endif
+
+    #define BOARD_ST7920_DELAY_1              96
+    #define BOARD_ST7920_DELAY_2              48
+    #define BOARD_ST7920_DELAY_3             600
+
+  #endif // !MKS_MINI_12864
+
+#endif // HAS_WIRED_LCD
+
+#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI, HAS_WIRED_LCD)
+  #define BEEPER_PIN                 EXP1_10_PIN
+  #define BTN_EN1                    EXP2_08_PIN
+  #define BTN_EN2                    EXP2_06_PIN
+  #define BTN_ENC                    EXP1_09_PIN
+#endif

ini/stm32f4.ini

@@ -405,6 +405,49 @@ build_flags       = ${env:mks_robin_nano_v3_usb_flash_drive.build_flags}
 build_unflags     = -DUSBD_USE_CDC
 
 #
+# MKS Eagle
+# 5 TMC2209 uart mode on board
+#
+[env:mks_eagle]
+platform                    = ${common_stm32.platform}
+extends                     = stm32_variant
+board                       = marlin_STM32F407VGT6_CCM
+board_build.variant         = MARLIN_F4x7Vx
+board_build.offset          = 0xC000
+board_upload.offset_address = 0x0800C000
+board_build.rename          = mks_eagle.bin
+build_flags                 = ${stm32_variant.build_flags} ${stm32f4_I2C1.build_flags}
+                              -DHAL_PCD_MODULE_ENABLED
+                              -DSTM32_FLASH_SIZE=512
+debug_tool                  = jlink
+upload_protocol             = jlink
+
+#
+# MKS Eagle with USB Flash Drive Support
+# Currently, using a STM32duino fork, until USB Host get merged
+#
+[env:mks_eagle_usb_flash_drive]
+platform          = ${common_stm32.platform}
+extends           = env:mks_eagle
+platform_packages = ${stm_flash_drive.platform_packages}
+build_flags       = ${stm_flash_drive.build_flags} ${stm32f4_I2C1.build_flags}
+                    -DUSE_USBHOST_HS
+                    -DUSBD_IRQ_PRIO=5
+                    -DUSBD_IRQ_SUBPRIO=6
+                    -DUSE_USB_HS_IN_FS
+
+#
+# MKS Eagle with USB Flash Drive Support and Shared Media
+# Currently, using a STM32duino fork, until USB Host and USB Device MSC get merged
+#
+[env:mks_eagle_usb_flash_drive_msc]
+platform          = ${common_stm32.platform}
+extends           = env:mks_eagle_usb_flash_drive
+build_flags       = ${env:mks_eagle_usb_flash_drive.build_flags}
+                    -DUSBD_USE_CDC_MSC
+build_unflags     = -DUSBD_USE_CDC
+
+#
 # This I2C1(PB8:I2C1_SCL PB9:I2C1_SDA) is used by MKS Monster8
 #
 [stm32f4_I2C1_CAN]
@@ -423,6 +466,7 @@ board_upload.offset_address = 0x0800C000
 board_build.rename          = mks_monster8.bin
 build_flags                 = ${stm32_variant.build_flags} ${stm32f4_I2C1_CAN.build_flags}
                               -DHAL_PCD_MODULE_ENABLED -DTIMER_SERIAL=TIM4
+                              -DSTM32_FLASH_SIZE=512
 debug_tool                  = jlink
 upload_protocol             = jlink