thomas
/
marlin
Sledovat 1
Oblíbit 0
Rozštěpit 0
Zdrojový kód Úkoly 0 Požadavky na natažení 0 Vydání 0 Wiki Activity
Procházet zdrojové kódy

Tweak config spacing

Scott Lahteine před 6 roky
rodič
a44ef27897
revize
af3bf6c956
77 změnil soubory, kde provedl 77 přidání a 77 odebrání
Rozdělené zobrazení Ukázat statistiku rozdílových dat
  1. 1
    1
      Marlin/Configuration.h
  2. 1
    1
      Marlin/src/config/default/Configuration.h
  3. 1
    1
      Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
  4. 1
    1
      Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
  5. 1
    1
      Marlin/src/config/examples/Anet/A2/Configuration.h
  6. 1
    1
      Marlin/src/config/examples/Anet/A2plus/Configuration.h
  7. 1
    1
      Marlin/src/config/examples/Anet/A6/Configuration.h
  8. 1
    1
      Marlin/src/config/examples/Anet/A8/Configuration.h
  9. 1
    1
      Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
  10. 1
    1
      Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
  11. 1
    1
      Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
  12. 1
    1
      Marlin/src/config/examples/BQ/Hephestos/Configuration.h
  13. 1
    1
      Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
  14. 1
    1
      Marlin/src/config/examples/BQ/WITBOX/Configuration.h
  15. 1
    1
      Marlin/src/config/examples/Cartesio/Configuration.h
  16. 1
    1
      Marlin/src/config/examples/Creality/CR-10/Configuration.h
  17. 1
    1
      Marlin/src/config/examples/Creality/CR-10S/Configuration.h
  18. 1
    1
      Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
  19. 1
    1
      Marlin/src/config/examples/Creality/CR-8/Configuration.h
  20. 1
    1
      Marlin/src/config/examples/Creality/Ender-2/Configuration.h
  21. 1
    1
      Marlin/src/config/examples/Creality/Ender-3/Configuration.h
  22. 1
    1
      Marlin/src/config/examples/Creality/Ender-4/Configuration.h
  23. 1
    1
      Marlin/src/config/examples/Einstart-S/Configuration.h
  24. 1
    1
      Marlin/src/config/examples/Felix/Configuration.h
  25. 1
    1
      Marlin/src/config/examples/Felix/DUAL/Configuration.h
  26. 1
    1
      Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
  27. 1
    1
      Marlin/src/config/examples/Formbot/Raptor/Configuration.h
  28. 1
    1
      Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h
  29. 1
    1
      Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
  30. 1
    1
      Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
  31. 1
    1
      Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
  32. 1
    1
      Marlin/src/config/examples/Geeetech/MeCreator2/Configuration.h
  33. 1
    1
      Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
  34. 1
    1
      Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
  35. 1
    1
      Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
  36. 1
    1
      Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
  37. 1
    1
      Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
  38. 1
    1
      Marlin/src/config/examples/JGAurora/A5/Configuration.h
  39. 1
    1
      Marlin/src/config/examples/MakerParts/Configuration.h
  40. 1
    1
      Marlin/src/config/examples/Malyan/M150/Configuration.h
  41. 1
    1
      Marlin/src/config/examples/Malyan/M200/Configuration.h
  42. 1
    1
      Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
  43. 1
    1
      Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
  44. 1
    1
      Marlin/src/config/examples/Mks/Sbase/Configuration.h
  45. 1
    1
      Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
  46. 1
    1
      Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
  47. 1
    1
      Marlin/src/config/examples/RigidBot/Configuration.h
  48. 1
    1
      Marlin/src/config/examples/SCARA/Configuration.h
  49. 1
    1
      Marlin/src/config/examples/STM32F10/Configuration.h
  50. 1
    1
      Marlin/src/config/examples/STM32F4/Configuration.h
  51. 1
    1
      Marlin/src/config/examples/Sanguinololu/Configuration.h
  52. 1
    1
      Marlin/src/config/examples/TheBorg/Configuration.h
  53. 1
    1
      Marlin/src/config/examples/TinyBoy2/Configuration.h
  54. 1
    1
      Marlin/src/config/examples/Tronxy/X1/Configuration.h
  55. 1
    1
      Marlin/src/config/examples/Tronxy/X3A/Configuration.h
  56. 1
    1
      Marlin/src/config/examples/Tronxy/X5S/Configuration.h
  57. 1
    1
      Marlin/src/config/examples/Tronxy/XY100/Configuration.h
  58. 1
    1
      Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
  59. 1
    1
      Marlin/src/config/examples/Velleman/K8200/Configuration.h
  60. 1
    1
      Marlin/src/config/examples/Velleman/K8400/Configuration.h
  61. 1
    1
      Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
  62. 1
    1
      Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
  63. 1
    1
      Marlin/src/config/examples/adafruit/ST7565/Configuration.h
  64. 1
    1
      Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
  65. 1
    1
      Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
  66. 1
    1
      Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
  67. 1
    1
      Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
  68. 1
    1
      Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
  69. 1
    1
      Marlin/src/config/examples/delta/generic/Configuration.h
  70. 1
    1
      Marlin/src/config/examples/delta/kossel_mini/Configuration.h
  71. 1
    1
      Marlin/src/config/examples/delta/kossel_pro/Configuration.h
  72. 1
    1
      Marlin/src/config/examples/delta/kossel_xl/Configuration.h
  73. 1
    1
      Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
  74. 1
    1
      Marlin/src/config/examples/makibox/Configuration.h
  75. 1
    1
      Marlin/src/config/examples/stm32f103ret6/Configuration.h
  76. 1
    1
      Marlin/src/config/examples/tvrrug/Round2/Configuration.h
  77. 1
    1
      Marlin/src/config/examples/wt150/Configuration.h

+ 1
- 1
Marlin/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/default/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/AliExpress/CL-260/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Anet/A2/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Anet/A2plus/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Anet/A6/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Anet/A8/Configuration.h Zobrazit soubor 

@@ -164,7 +164,7 @@
164 164 
   //#define SINGLENOZZLE_SWAP_PARK
165 165 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
166 166 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
167 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
167 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
168 168 
   #else
169 169 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
170 170 
   #endif

+ 1
- 1
Marlin/src/config/examples/Azteeg/X5GT/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/BQ/Hephestos/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h Zobrazit soubor 

@@ -171,7 +171,7 @@
171 171 
   //#define SINGLENOZZLE_SWAP_PARK
172 172 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
173 173 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
174 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
174 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
175 175 
   #else
176 176 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
177 177 
   #endif

+ 1
- 1
Marlin/src/config/examples/BQ/WITBOX/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Cartesio/Configuration.h Zobrazit soubor 

@@ -164,7 +164,7 @@
164 164 
   //#define SINGLENOZZLE_SWAP_PARK
165 165 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
166 166 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
167 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
167 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
168 168 
   #else
169 169 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
170 170 
   #endif

+ 1
- 1
Marlin/src/config/examples/Creality/CR-10/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Creality/CR-10S/Configuration.h Zobrazit soubor 

@@ -167,7 +167,7 @@
167 167 
   //#define SINGLENOZZLE_SWAP_PARK
168 168 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
169 169 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
170 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
170 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
171 171 
   #else
172 172 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
173 173 
   #endif

+ 1
- 1
Marlin/src/config/examples/Creality/CR-10mini/Configuration.h Zobrazit soubor 

@@ -172,7 +172,7 @@
172 172 
   //#define SINGLENOZZLE_SWAP_PARK
173 173 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
174 174 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
175 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
175 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
176 176 
   #else
177 177 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
178 178 
   #endif

+ 1
- 1
Marlin/src/config/examples/Creality/CR-8/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Creality/Ender-2/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Creality/Ender-3/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Creality/Ender-4/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Einstart-S/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Felix/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Felix/DUAL/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Formbot/Raptor/Configuration.h Zobrazit soubor 

@@ -204,7 +204,7 @@
204 204 
   //#define SINGLENOZZLE_SWAP_PARK
205 205 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
206 206 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
207 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
207 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
208 208 
   #else
209 209 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
210 210 
   #endif

+ 1
- 1
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h Zobrazit soubor 

@@ -166,7 +166,7 @@
166 166 
   //#define SINGLENOZZLE_SWAP_PARK
167 167 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
169 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
169 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
170 170 
   #else
171 171 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
172 172 
   #endif

+ 1
- 1
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h Zobrazit soubor 

@@ -167,7 +167,7 @@
167 167 
   //#define SINGLENOZZLE_SWAP_PARK
168 168 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
169 169 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
170 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
170 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
171 171 
   #else
172 172 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
173 173 
   #endif

+ 1
- 1
Marlin/src/config/examples/Geeetech/GT2560/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Geeetech/MeCreator2/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Infitary/i3-M508/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/JGAurora/A5/Configuration.h Zobrazit soubor 

@@ -168,7 +168,7 @@
168 168 
   //#define SINGLENOZZLE_SWAP_PARK
169 169 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
170 170 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
171 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
171 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
172 172 
   #else
173 173 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
174 174 
   #endif

+ 1
- 1
Marlin/src/config/examples/MakerParts/Configuration.h Zobrazit soubor 

@@ -183,7 +183,7 @@
183 183 
   //#define SINGLENOZZLE_SWAP_PARK
184 184 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
185 185 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
186 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
186 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
187 187 
   #else
188 188 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
189 189 
   #endif

+ 1
- 1
Marlin/src/config/examples/Malyan/M150/Configuration.h Zobrazit soubor 

@@ -168,7 +168,7 @@
168 168 
   //#define SINGLENOZZLE_SWAP_PARK
169 169 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
170 170 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
171 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
171 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
172 172 
   #else
173 173 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
174 174 
   #endif

+ 1
- 1
Marlin/src/config/examples/Malyan/M200/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Micromake/C1/basic/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Mks/Sbase/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/RigidBot/Configuration.h Zobrazit soubor 

@@ -166,7 +166,7 @@
166 166 
   //#define SINGLENOZZLE_SWAP_PARK
167 167 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
169 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
169 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
170 170 
   #else
171 171 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
172 172 
   #endif

+ 1
- 1
Marlin/src/config/examples/SCARA/Configuration.h Zobrazit soubor 

@@ -194,7 +194,7 @@
194 194 
   //#define SINGLENOZZLE_SWAP_PARK
195 195 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
196 196 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
197 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
197 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
198 198 
   #else
199 199 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
200 200 
   #endif

+ 1
- 1
Marlin/src/config/examples/STM32F10/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/STM32F4/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Sanguinololu/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/TheBorg/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/TinyBoy2/Configuration.h Zobrazit soubor 

@@ -185,7 +185,7 @@
185 185 
   //#define SINGLENOZZLE_SWAP_PARK
186 186 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
187 187 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
188 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
188 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
189 189 
   #else
190 190 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
191 191 
   #endif

+ 1
- 1
Marlin/src/config/examples/Tronxy/X1/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Tronxy/X3A/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Tronxy/X5S/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Tronxy/XY100/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Velleman/K8200/Configuration.h Zobrazit soubor 

@@ -183,7 +183,7 @@
183 183 
   //#define SINGLENOZZLE_SWAP_PARK
184 184 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
185 185 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
186 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
186 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
187 187 
   #else
188 188 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
189 189 
   #endif

+ 1
- 1
Marlin/src/config/examples/Velleman/K8400/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/adafruit/ST7565/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h Zobrazit soubor 

@@ -176,7 +176,7 @@
176 176 
   //#define SINGLENOZZLE_SWAP_PARK
177 177 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
178 178 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
179 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
179 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
180 180 
   #else
181 181 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
182 182 
   #endif

+ 1
- 1
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h Zobrazit soubor 

@@ -168,7 +168,7 @@
168 168 
   //#define SINGLENOZZLE_SWAP_PARK
169 169 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
170 170 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
171 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
171 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
172 172 
   #else
173 173 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
174 174 
   #endif

+ 1
- 1
Marlin/src/config/examples/delta/generic/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/delta/kossel_mini/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/delta/kossel_pro/Configuration.h Zobrazit soubor 

@@ -167,7 +167,7 @@
167 167 
   //#define SINGLENOZZLE_SWAP_PARK
168 168 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
169 169 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
170 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
170 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
171 171 
   #else
172 172 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
173 173 
   #endif

+ 1
- 1
Marlin/src/config/examples/delta/kossel_xl/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h Zobrazit soubor 

@@ -168,7 +168,7 @@
168 168 
   //#define SINGLENOZZLE_SWAP_PARK
169 169 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
170 170 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
171 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
171 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
172 172 
   #else
173 173 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
174 174 
   #endif

+ 1
- 1
Marlin/src/config/examples/makibox/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/stm32f103ret6/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/tvrrug/Round2/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

+ 1
- 1
Marlin/src/config/examples/wt150/Configuration.h Zobrazit soubor 

@@ -163,7 +163,7 @@
163 163 
   //#define SINGLENOZZLE_SWAP_PARK
164 164 
   #if ENABLED(SINGLENOZZLE_SWAP_PARK)
165 165 
     #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
166 
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
166 
+    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
167 167 
   #else
168 168 
     #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
169 169 
   #endif

Write Preview
Loading…
Zrušit
Uložit