🔧 Sanity checks for Ender 3 V2

Marlin/src/inc/SanityCheck.h

  * LCD_BED_LEVELING requirements
  */
 #if ENABLED(LCD_BED_LEVELING)
-  #if !HAS_LCD_MENU
-    #error "LCD_BED_LEVELING requires a programmable LCD controller."
+  #if NONE(HAS_LCD_MENU, DWIN_CREALITY_LCD)
+    #error "LCD_BED_LEVELING is not supported by the selected LCD controller."
   #elif !(ENABLED(MESH_BED_LEVELING) || HAS_ABL_NOT_UBL)
     #error "LCD_BED_LEVELING requires MESH_BED_LEVELING or AUTO_BED_LEVELING."
   #elif ENABLED(MESH_EDIT_MENU) && !HAS_MESH
   + (ENABLED(IS_LEGACY_TFT) && COUNT_ENABLED(TFT_320x240, TFT_320x240_SPI, TFT_480x320, TFT_480x320_SPI)) \
   + COUNT_ENABLED(ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON, ANYCUBIC_TFT35) \
   + COUNT_ENABLED(DGUS_LCD_UI_ORIGIN, DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY, DGUS_LCD_UI_MKS) \
-  + COUNT_ENABLED(ENDER2_STOCKDISPLAY, CR10_STOCKDISPLAY, DWIN_CREALITY_LCD) \
-  + COUNT_ENABLED(DWIN_MARLINUI_PORTRAIT, DWIN_MARLINUI_LANDSCAPE) \
+  + COUNT_ENABLED(ENDER2_STOCKDISPLAY, CR10_STOCKDISPLAY) \
+  + COUNT_ENABLED(DWIN_CREALITY_LCD, DWIN_MARLINUI_PORTRAIT, DWIN_MARLINUI_LANDSCAPE) \
   + COUNT_ENABLED(FYSETC_MINI_12864_X_X, FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1, FYSETC_GENERIC_12864_1_1) \
   + COUNT_ENABLED(LCD_SAINSMART_I2C_1602, LCD_SAINSMART_I2C_2004) \
   + COUNT_ENABLED(MKS_12864OLED, MKS_12864OLED_SSD1306) \
 #endif
 
 /**
+ * Ender 3 V2 controller has some limitations
+ */
+#if ENABLED(DWIN_CREALITY_LCD)
+  #if DISABLED(SDSUPPORT)
+    #error "DWIN_CREALITY_LCD requires SDSUPPORT to be enabled."
+  #elif ENABLED(PID_EDIT_MENU)
+    #error "DWIN_CREALITY_LCD does not support PID_EDIT_MENU."
+  #elif ENABLED(PID_AUTOTUNE_MENU)
+    #error "DWIN_CREALITY_LCD does not support PID_AUTOTUNE_MENU."
+  #elif ENABLED(LEVEL_BED_CORNERS)
+    #error "DWIN_CREALITY_LCD does not support LEVEL_BED_CORNERS."
+  #elif BOTH(LCD_BED_LEVELING, PROBE_MANUALLY)
+    #error "DWIN_CREALITY_LCD does not support LCD_BED_LEVELING with PROBE_MANUALLY."
+  #endif
+#endif
+
+/**
  * Some boards forbid the use of -1 Native USB
  */
 #if ENABLED(BOARD_NO_NATIVE_USB)

Marlin/src/lcd/e3v2/creality/dwin.cpp

 
 #include "dwin.h"
 
-#if ANY(AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT) && DISABLED(PROBE_MANUALLY)
+#if ENABLED(LCD_BED_LEVELING) && DISABLED(PROBE_MANUALLY) && ANY(AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT)
   #define HAS_ONESTEP_LEVELING 1
 #endif