Replace MIN# / MAX# with variadic MIN / MAX (#11960)

Marlin/src/core/macros.h

@@ -20,8 +20,9 @@
  *
  */
 
-#ifndef _CORE_MACROS_H_
-#define _CORE_MACROS_H_
+#pragma once
+
+#include "minmax.h"
 
 #define NUM_AXIS 4
 #define ABCE 4
@@ -93,10 +94,6 @@
 #define IS_POWER_OF_2(x) ((x) && !((x) & ((x) - 1)))
 
 // Macros to constrain values
-// Avoid double evaluation of arguments to NOMORE/NOLESS/LIMIT
-#undef NOMORE
-#undef NOLESS
-#undef LIMIT
 #ifdef __cplusplus
 
   // C++11 solution that is standards compliant.
@@ -207,49 +204,13 @@
 
 #define CEILING(x,y) (((x) + (y) - 1) / (y))
 
-// Avoid double evaluation of arguments on MIN/MAX/ABS
-#undef MIN
-#undef MAX
 #undef ABS
 #ifdef __cplusplus
-
-  // C++11 solution that is standards compliant. Return type is deduced automatically
-  template <class L, class R> static inline constexpr auto MIN(const L lhs, const R rhs) -> decltype(lhs + rhs) {
-    return lhs < rhs ? lhs : rhs;
-  }
-  template <class L, class R> static inline constexpr auto MAX(const L lhs, const R rhs) -> decltype(lhs + rhs){
-    return lhs > rhs ? lhs : rhs;
-  }
-  template <class T> static inline constexpr const T ABS(const T v) {
-    return v >= 0 ? v : -v;
-  }
+  template <class T> static inline constexpr const T ABS(const T v) { return v >= 0 ? v : -v; }
 #else
-
-  // Using GCC extensions, but Travis GCC version does not like it and gives
-  //  "error: statement-expressions are not allowed outside functions nor in template-argument lists"
-  #define MIN(a, b) \
-    ({__typeof__(a) _a = (a); \
-      __typeof__(b) _b = (b); \
-      _a < _b ? _a : _b;})
-
-  #define MAX(a, b) \
-    ({__typeof__(a) _a = (a); \
-      __typeof__(b) _b = (b); \
-      _a > _b ? _a : _b;})
-
-  #define ABS(a) \
-    ({__typeof__(a) _a = (a); \
-      _a >= 0 ? _a : -_a;})
-
+  #define ABS(a) ({__typeof__(a) _a = (a); _a >= 0 ? _a : -_a;})
 #endif
 
-#define MIN3(a, b, c)       MIN(MIN(a, b), c)
-#define MIN4(a, b, c, d)    MIN(MIN3(a, b, c), d)
-#define MIN5(a, b, c, d, e) MIN(MIN4(a, b, c, d), e)
-#define MAX3(a, b, c)       MAX(MAX(a, b), c)
-#define MAX4(a, b, c, d)    MAX(MAX3(a, b, c), d)
-#define MAX5(a, b, c, d, e) MAX(MAX4(a, b, c, d), e)
-
 #define UNEAR_ZERO(x) ((x) < 0.000001f)
 #define NEAR_ZERO(x) WITHIN(x, -0.000001f, 0.000001f)
 #define NEAR(x,y) NEAR_ZERO((x)-(y))
@@ -269,5 +230,3 @@
 #define LROUND(x)   lroundf(x)
 #define FMOD(x, y)  fmodf(x, y)
 #define HYPOT(x,y)  SQRT(HYPOT2(x,y))
-
-#endif // _CORE_MACROS_H_

Marlin/src/core/minmax.h

@@ -0,0 +1,68 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#pragma once
+
+#undef MIN
+#undef MAX
+
+#ifdef __cplusplus
+
+  extern "C++" {
+
+    // C++11 solution that is standards compliant. Return type is deduced automatically
+    template <class L, class R> static inline constexpr auto MIN(const L lhs, const R rhs) -> decltype(lhs + rhs) {
+      return lhs < rhs ? lhs : rhs;
+    }
+    template <class L, class R> static inline constexpr auto MAX(const L lhs, const R rhs) -> decltype(lhs + rhs) {
+      return lhs > rhs ? lhs : rhs;
+    }
+    template<class T, class ... Ts> static inline constexpr const T MIN(T V, Ts... Vs) { return MIN(V, MIN(Vs...)); }
+    template<class T, class ... Ts> static inline constexpr const T MAX(T V, Ts... Vs) { return MAX(V, MAX(Vs...)); }
+
+  }
+
+#else
+
+  // NUM_ARGS(...) evaluates to the number of arguments
+  #define _NUM_ARGS(X,X6,X5,X4,X3,X2,X1,N,...) N
+  #define NUM_ARGS(...) _NUM_ARGS(0, __VA_ARGS__ ,6,5,4,3,2,1,0)
+
+  #define MIN_2(a,b)      ({__typeof__(a) _a = (a); __typeof__(b) _b = (b); _a > _b ? _a : _b;})
+  #define MIN_3(a,...)    MIN_2(a,MIN_2(__VA_ARGS__))
+  #define MIN_4(a,...)    MIN_2(a,MIN_3(__VA_ARGS__))
+  #define MIN_5(a,...)    MIN_2(a,MIN_4(__VA_ARGS__))
+  #define MIN_6(a,...)    MIN_2(a,MIN_4(__VA_ARGS__))
+  #define __MIN_N(N, ...) MIN_ ## N(__VA_ARGS__)
+  #define _MIN_N(N, ...)  __MIN_N(N, __VA_ARGS__)
+  #define MIN(...)        _MIN_N(NUM_ARGS(__VA_ARGS__), __VA_ARGS__)
+
+  #define MAX_2(a,b)      ({__typeof__(a) _a = (a); __typeof__(b) _b = (b); _a > _b ? _a : _b;})
+  #define MAX_3(a,...)    MAX_2(a,MAX_2(__VA_ARGS__))
+  #define MAX_4(a,...)    MAX_2(a,MAX_3(__VA_ARGS__))
+  #define MAX_5(a,...)    MAX_2(a,MAX_4(__VA_ARGS__))
+  #define MAX_6(a,...)    MAX_2(a,MAX_4(__VA_ARGS__))
+  #define __MAX_N(N, ...) MAX_ ## N(__VA_ARGS__)
+  #define _MAX_N(N, ...)  __MAX_N(N, __VA_ARGS__)
+  #define MAX(...)        _MAX_N(NUM_ARGS(__VA_ARGS__), __VA_ARGS__)
+
+#endif

Marlin/src/feature/leds/tempstat.cpp

@@ -38,10 +38,10 @@ void handle_status_leds(void) {
     next_status_led_update_ms += 500; // Update every 0.5s
     float max_temp = 0.0;
     #if HAS_HEATED_BED
-      max_temp = MAX3(max_temp, thermalManager.degTargetBed(), thermalManager.degBed());
+      max_temp = MAX(max_temp, thermalManager.degTargetBed(), thermalManager.degBed());
     #endif
     HOTEND_LOOP()
-      max_temp = MAX3(max_temp, thermalManager.degHotend(e), thermalManager.degTargetHotend(e));
+      max_temp = MAX(max_temp, thermalManager.degHotend(e), thermalManager.degTargetHotend(e));
     const bool new_led = (max_temp > 55.0) ? true : (max_temp < 54.0) ? false : red_led;
     if (new_led != red_led) {
       red_led = new_led;

Marlin/src/gcode/calibrate/G33.cpp

@@ -651,7 +651,7 @@ void GcodeSuite::G33() {
       }
 
       // adjust delta_height and endstops by the max amount
-      const float z_temp = MAX3(delta_endstop_adj[A_AXIS], delta_endstop_adj[B_AXIS], delta_endstop_adj[C_AXIS]);
+      const float z_temp = MAX(delta_endstop_adj[A_AXIS], delta_endstop_adj[B_AXIS], delta_endstop_adj[C_AXIS]);
       delta_height -= z_temp;
       LOOP_XYZ(axis) delta_endstop_adj[axis] -= z_temp;
     }

Marlin/src/inc/Conditionals_post.h

@@ -1255,7 +1255,7 @@
   #define _PROBE_RADIUS (DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
   #ifndef DELTA_CALIBRATION_RADIUS
     #ifdef X_PROBE_OFFSET_FROM_EXTRUDER
-      #define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - MAX3(abs(X_PROBE_OFFSET_FROM_EXTRUDER), abs(Y_PROBE_OFFSET_FROM_EXTRUDER), abs(MIN_PROBE_EDGE)))
+      #define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - MAX(ABS(X_PROBE_OFFSET_FROM_EXTRUDER), ABS(Y_PROBE_OFFSET_FROM_EXTRUDER), ABS(MIN_PROBE_EDGE)))
     #else
       #define DELTA_CALIBRATION_RADIUS _PROBE_RADIUS
     #endif

Marlin/src/lcd/ultralcd.cpp

@@ -3697,17 +3697,17 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
     void _lcd_configuration_temperature_preheat_settings_menu(const uint8_t material) {
       #if HOTENDS > 5
-        #define MINTEMP_ALL MIN5(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP, HEATER_5_MINTEMP)
-        #define MAXTEMP_ALL MAX5(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP)
+        #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP, HEATER_5_MINTEMP)
+        #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP)
       #elif HOTENDS > 4
-        #define MINTEMP_ALL MIN5(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP)
-        #define MAXTEMP_ALL MAX5(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP)
+        #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP)
+        #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP)
       #elif HOTENDS > 3
-        #define MINTEMP_ALL MIN4(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP)
-        #define MAXTEMP_ALL MAX4(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP)
+        #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP)
+        #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP)
       #elif HOTENDS > 2
-        #define MINTEMP_ALL MIN3(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP)
-        #define MAXTEMP_ALL MAX3(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP)
+        #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP)
+        #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP)
       #elif HOTENDS > 1
         #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP)
         #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP)

Marlin/src/module/motion.cpp

@@ -1541,7 +1541,7 @@ void homeaxis(const AxisEnum axis) {
           case X_AXIS:
           case Y_AXIS:
             // Get a minimum radius for clamping
-            soft_endstop_radius = MIN3(ABS(MAX(soft_endstop_min[X_AXIS], soft_endstop_min[Y_AXIS])), soft_endstop_max[X_AXIS], soft_endstop_max[Y_AXIS]);
+            soft_endstop_radius = MIN(ABS(MAX(soft_endstop_min[X_AXIS], soft_endstop_min[Y_AXIS])), soft_endstop_max[X_AXIS], soft_endstop_max[Y_AXIS]);
             soft_endstop_radius_2 = sq(soft_endstop_radius);
             break;
         #endif

Marlin/src/module/planner.cpp

@@ -1762,7 +1762,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
   #endif
 
   block->steps[E_AXIS] = esteps;
-  block->step_event_count = MAX4(block->steps[A_AXIS], block->steps[B_AXIS], block->steps[C_AXIS], esteps);
+  block->step_event_count = MAX(block->steps[A_AXIS], block->steps[B_AXIS], block->steps[C_AXIS], esteps);
 
   // Bail if this is a zero-length block
   if (block->step_event_count < MIN_STEPS_PER_SEGMENT) return false;
@@ -2120,8 +2120,8 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
     }
     ys0 = axis_segment_time_us[Y_AXIS][0] = ys0 + segment_time_us;
 
-    const uint32_t max_x_segment_time = MAX3(xs0, xs1, xs2),
-                   max_y_segment_time = MAX3(ys0, ys1, ys2),
+    const uint32_t max_x_segment_time = MAX(xs0, xs1, xs2),
+                   max_y_segment_time = MAX(ys0, ys1, ys2),
                    min_xy_segment_time = MIN(max_x_segment_time, max_y_segment_time);
     if (min_xy_segment_time < MAX_FREQ_TIME_US) {
       const float low_sf = speed_factor * min_xy_segment_time / (MAX_FREQ_TIME_US);
@@ -2354,7 +2354,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
       }
 
       // Get the lowest speed
-      vmax_junction_sqr = MIN3(vmax_junction_sqr, block->nominal_speed_sqr, previous_nominal_speed_sqr);
+      vmax_junction_sqr = MIN(vmax_junction_sqr, block->nominal_speed_sqr, previous_nominal_speed_sqr);
     }
     else // Init entry speed to zero. Assume it starts from rest. Planner will correct this later.
       vmax_junction_sqr = 0;

frameworks/CMSIS/LPC1768/include/lpc_types.h

@@ -145,12 +145,7 @@ typedef int32_t(*PFI)();
 /* External data/function define */
 #define EXTERN extern
 
-#ifndef MAX
-  #define MAX(a, b) (((a) > (b)) ? (a) : (b))
-#endif
-#ifndef MIN
-  #define MIN(a, b) (((a) < (b)) ? (a) : (b))
-#endif
+#include "../../../../src/core/minmax.h"
 
 /**
  * @}